Resume - Workshop / Fleet manager over 20 years experience

Misco Jobs

Resume #75345

CONTACT INFORMATION:
View contact information...

Profile
A self-motivated and hard working Fleet Support Manager with experience in all aspects of fleet operations. Able to use own initiative, and work as part of a team. Proven leadership skills, including managing and motivating other staff to achieve company objectives. An effective communicator at all levels within an organisation. Good problem solving and analytical skills.

Computer literate.

Employment History
Plant and vehicle maintenance manager
June 2007- May 2008 Qatar Quarry Qatar
Myduties encompassed but were not limited to the following:
* Setting up and running and maintenance facility for all vehicles.
* All associated costings for maintenance and repair of vehicles.
* Technical support to mechanics including all recovery operations: circa 150 staff
* Overseeing internal quality control and implementation of safety standards
* Responsible for fleet of 300+ vehicles inc MHE and generators and plant equipment
* Ensures DDR reports are done in a timely and correct fashion
Force Vehicle Maintenance/ Logistics manager
2006- June 2007 Multinational Force and Observers Sinai
My duties encompass but are not limited to:
* Overseeing efficiency of the operation of the Transport training, licenses, safety and Vehicle Accident unit; Circa 200 staff
* Establish procedures in administering briefings, conduct driving test/assessment for incoming new staff members and officers for the mission prior to issue of MFO Driving Permits;
* Budget responsibility (operational expenditure total value $1.8m )
* Responsible for fleet of 500+ vehicles inc MHE and generators and plant equipment
* Review and develop all fleet procedures inc contract hire and leasing of vehicles
* Ensures DDR reports are done in a timely and correct fashion throughout the Mission area;
* Responsible for all workshop operations inc remote site and recovery operations
* Supervises proper action in cases of accident and theft reports, ensures the broken down or accident vehicles in the mission area are recovered and relevant reports are made;
* Evaluate vehicles and equipment for write-off action if they are beyond economical repair and unroadworthy;
* Administer procedures for the effective control of the vehicles/equipment
Technical Fleet Support Manager
2004-Dec 2005 Finning Caterpillar.UK Ltd Cannock
My duties encompass but are not limited to:
* Responsible for fleet of 400+ vehicles inc MHE and generators and plant equipment
* Responsible for contract maintenance and warranty issue's
* Responsible for all network SMR operations
* Support to all contract and lease customers
* Technical support to mechanics
* Procurement of costs from customers
* Budget Forecast cost and control
* Produce weekly / monthly fleet reports including hire, accidents etc
* Maintain and update all fleet data
Technical Fleet Support Manager
2000-2004 MANERF.UK.LTD Middlewich
My duties encompass but are not limited to:
* Department budget forecasting and control £ 900k
* Responsible for all fleet maintenance issues and technical support of sales team
* Responsible for a fleet of circa 2500 Vehicles and Trailers
* Build and maintain good customer relations
* Technical support to on scene mechanics
* Responsible for all network SMR operations
* Monitoring of workshop repair times on customer vehicles
* Played a key role in customising and developing existing software package (AS400) to suit the company's specific requirements
* Supervision of a team of 150 staff both technical and Administrative.
* Develop and control all fleet operations

Transport Fleet Support Manager
1996- 2000 U.N.M.I.K Pristina
Overseeing internal quality control and implementation of safety standards mission wide;
Establishing correct procedures and standards within the transport section;
Improving and updating productivity to standards acceptable to the United Nations;
Implementing Health and Safety within the workplace. Conduct defensive driving and winter driving training on all vehicles, including armoured vehicles (in-house training); Conduct accident investigations including vehicle Inspections.
Ensures DDR reports are done in a timely and correct fashion throughout the Mission area;
Ensure that all legal documents are managed and responded to within relevant timescales and ensure United Nations compliance

Workshop Manager
1994-1996 Lex Commercial Vehicles Derby
Responsibilities included the effective administration of 16 Heavy Vehicle Technicians divided over a 2-day shift-working pattern. Also responsible for the health and safety within the workplace. Duties also included the overall supervision of both the technical and administrative staff within the workshop.
Also responsible for the tasking of breakdown work as and when required by both own and transient customers.

Workshop / Transport Controller
1991- 1994 Stoford transport Ltd Warrington

Responsibilities included the workshop loading and liaising with customers to make sure vehicles were available to be serviced and inspected in accordance with legislation. Also responsible for ongoing training requirements for staff both technical, and non-technical. Duties also included the recruitment of additional staff as required.
SOLDIER
1979-1991 Hm Forces Worldwide

Responsible for support to various military operations and attachments throughout the world, including Northern Ireland, where I served for 2 years working in an intelligence gathering role, the Falkland Islands, and the gulf war of 1991. Duties also included the training of junior members of the units. Also trained as vehicle engineer with extensive experience in the recovery of all types of vehicles. Qualified as commando and served with the Royal Marines in both Northern Ireland on protection duties, and Norway on a number of occasions. Also trained as a parachutist and spent time serving with the 2nd Battalion on various operations and exercises worldwide.
Qualifications obtained o Nominated tester class 4 & 7vehs November 1990
o Heavy and Armoured Vehicle recovery June 1983
o Standards in HGV Veh testing September 1994
o B tec HND Vehicle Technology completed June 1998
o "O" Licence Protection June 2000
o Mercedes Diagnosis June 2000
o Warranty Administration June 2000
o Cummins C.E.L.E.C.T. December 2001
o MANCAT Diagnostics January 2002
o ECT Fault Diagnosis January 2003
o CPC National December 2003
o Tech 3 Instructor Jan 2006
o Toyota Diagnosis (Land cruiser) May 2006
Vocational Training o European computer driving licence o Computer literate o Knowledge of Microsoft products o Knowledge of AS400
o Knowledge of SAP
* Leisure Activities
Hobbies and interests: Swimming, chess, and reading military biographies

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 3093)

Go to Search Parameters...

Brief Description

Civil Engineer with wide and solid experience in planning and execution of remodeling projects and construction of gas station in multinational company dedicated to the commercialization of fuel and lubricant. Skilled making decisions lowers pressure. With easiness to manage teams of high acting and

To apply a position as an Electrical Engineer

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

Power Plants Commissioning , Operation, HRSG Commissioning

I am a Diploma in Electrical and Eletronics Engineer with 3years experience in the field of Electrical Cad Designing and Electrical Control Panel Wiring, i do have knowledge in system administration and Primavera Project Planner.

Have a working knowlege of setting up total stations, performing traverses, level loops, topos, and drafting with Land Development Desktop

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Cost Estimating, Project and Contract Management, Planning/Scheduling, Project Controls and Finance

Surveyor with diploma and 3 years of wide range of professional experience

Workshop / Fleet manager over 20 years experience

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

Regional Manager for GSM site construction, Registered Civil Engineer, AutoCADD detail supervisor

Mapping Draftsman, Cartographer, CAD Operator, Survey Draftperson, Mapping, Draftsman, GIS Technician, GIS Operator

Knowledgeable in all aspects of capital projects including but not limited to the planning phase, progress and cost tracking, material requisitioning, project reporting, project documentation, and scheduling. Proficient in analyzing cost trends and variances for clarification or correction.

Provide technical expertise, guidance and leadership for a variety of designated engineering projects at site.

SENIOR PLANNING ENGINEER (OIL & GAS)

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

I have a good experience in Plant Modelling using PDMS and knowledge about Pressure Parts & piping Stress Analysis.By majoring in PDMS, I have been exposed to ADMIN, DESIGN, PARAGON, SPECON, DRAFT AND ISODRAFT Modules. And, Iam also involved in creating 4D simulation and presenting of pro

Maintenance, water purification, reverse osmosis, materials, logistics, management

Worked experience of 4 yrs. in the field of EIA and EMP for various infrastructure and construction projects including world bank funded projects.

CAD/CAM engineering

I have Excellent technical, communication and interpersonal skills with very good troubleshooting and problem solving skills and ability to work on multiple tasks in a fast paced environment independently and in a team. I can strive to make things work more efficiently and effectively .

12 years of experience on Intergraph EDMS/CAD System, specially PDS & Smart Plant products administration; at present working as EDMS Engineer in Sabic, Saudi Arabia since April-2001. I am going to be released by end of 2007; please find my CV attached herewith.

Instrument Engineer (Construction) , Site Engineer (Instrumentation), Field Construction Engineer (Instrumentation), 05+ Years Exp., Engineerind Degree in Electronics & Instrumentation

80 Hour Certification, 10+Years experience Construction, Light Mechanical Experience, 8+ Years Heavy Equipment Experience

Entry level electrical engineer resume

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

I am a Senior Process Engineer in oil & gas systems. Along my 18 years experience in the field, I have held a number of positions going form operation to project execution and management and process engineering activities. I am fluent in English, French and Arabic.

I am Electronics and Communication graduate and presently working in Saudi Arabia

Of late brilliantly completed the scheduled Training in Calibration, Testing and Conformity Assessment from RTC(ER), Govt. of India

I am a young ,dynamic, smart having a good percentage degree of production engineer.

I am Civil Engineering graduate and having three years experience in the construction field.

I have a three years experience as an auto electrician and heavy equipment mechanic for Trident Transport Company in Abu Dhabi. I am looking for same kind of job in Abu Dhabi or in Europe, like Netherlands, Belgium or Germany.

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

Logistics, Procurement and Materials Manager (Supply chain)

A solid background in project controls, project coordination, project scheduling, and records management with over twelve years combined experience in these areas.

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

I am working as a Mechanical/HSE Engineer in ADCOP (Abu Dhabi Crude Oil Pipe line Project) in Abu Dhabi, UAE. I have also got the training in Oil and Gas processing Plant for three months and also worked as a maintenance and sales engineer in SATAKE Corporation, JAPAN Pvt. Ltd.

A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget.

Mechanical Engineering Diploma holder with BGAS Painting Inspector Grade 2 Certification, working in Saudi Arabia-(Saudi Aramco contractor) as a Painting Inspector in pipeline construction field (Gas Wells, Manifolds, Trunk lines, GOSP & Gas Plants, etc).

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

I am a mining engineer and also has a masters degree in urban and regional planning.

QUALFIED FITTER, EXPERIENCE ON DOSERS, CATERPILLARS, HITACHI LAODERS, REPARI AND INSTALL HOWDEN, EAGEL, SAMURI, MONO AND SAMSON WATER PUMPS, REPAIRED AND MAINTAINED LOCOMOTIVES AT TRANSNET.

Summary An enthusiastic, Postgraduate Civil engineer with 2 years and 2 months of experience in the design, Engineering and Construction of Industrial, infrastructure and Multi storied Buildings, Eager to learn new technologies

recent chemical engineering graduate with 2 years of work experiences including R&D and industrial experiences. Experiences in pilot plant operations, bench tests, process engineer

I am a self-motivated, determined and organized individual who strives to perform any task to the best of my abilities. I have a strong background in 2D and 3D drafting, design and modelling and am capable of producing accurate and high quality drawings in a fast paced environment.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out