Resume - Power Plant Erection/Maintenance /Warranty Engineer

Misco Jobs

Resume #75386

CONTACT INFORMATION:
View contact information...

A Mechanical engineering graduate with 12 years of experience in Power Plant Equipment and Piping Erection, Pre Commissioning, Commissioning & Startup assistance and Mechanical Maintenance.

Familiar with Gas Turbines, Steam Turbines, Compressors, Boilers, Pressure Vessels, HP & LP Steam System, Distillate and Natural Gas Systems.

Objective: To pursue a career in the Power / Oil & Gas field and contribute effectively to the organization.

Professional experience highlights:

UAE:
January, 2005 to Present

Position: Mechanical Engineer (Warranty)

Employer: Toshiba Corporation
EPC Contractor for Power Island.

Project: 1550 MW Independent Water & Power Project of Arabian Power Company
Umm Al Naar,
Abu Dhabi, UAE

Tasks Handled

Currently serving as a Warranty Engineer (Mechanical).
Lead Engineer for the upcoming Winter Shutdown of the CCPP.
Taking care of Outstanding items, Punch Lists, Modifications advised by Vendors /Toshiba Design Group, Rectifications and Works requested by Defect Liability Group (Warranty).
Technical discussions with specialist Contractors
Advising the Defect Liability Group on Mechanical Defects & Rectification Methods.
Carrying out defect rectification works as informed by Defect Liability Notice (Warranty)
Work force management and Job supervision.

Commissioning & Maintenance

Gas Turbines (GE Fr 9 FA)

Routine Maintenance and Short Outage Maintenance till Hand over to Client.
Commissioning Assistance
Co ordination with Toshiba Commissioning Group for day to day Commissioning Assistance jobs and other Vendor advised Modifications etc….

HRSG (582 tons/hour, Doosan)

Maintenance Supervision to HRSG till handover to Client.

Commissioning Assistance and Interaction with the Vendor & Toshiba Design Dept: for all rectification & modification works.

Steam Turbines and Steam Turbo Generators (Toshiba)

Supervised the routine and short shut down maintenance of Steam Turbine & Generators.
Carried out all major Inspections and Rectification jobs for Steam Turbines & Generators.
Carried out modifications as advised by TA / Design Dept:
Taken care of Commissioning Assistance for Steam Turbines and Generators.

Balance of Plant
All Maintenance jobs on BoP systems such as Fuel Gas, Distillate, Condensate Water, Plant & Instrument Air, HP Steam, LP Steam & Feed Water systems were carried out till hand over to Client.
Direct supervision of all major modification jobs in BoP.
Interaction with Client & Owners Engineer for Inspections & Punch List Clearing.
Commissioning Assistance.
Erection and Pre Commissioning

Gas Turbine & Generators (GE Fr: 9FA)

Commissioning assistance to Toshiba Commissioning Group
Modifications and Punch List Clearing
Pre Commissioning jobs.

Heat Recovery Steam Generators

Erection:

Erection of pressure parts (Vessels, Modules, and Drum internals)
Erection of external piping (P91/P22 etc)
Erection of BFP and associated piping.
Erection of Supplementary Fire System (Burners &Piping)
Erection of Casing, Casing insulation, Cladding and Insulation
Acted as a stand in for the Senior Engineer (Equipment Erection) from time to time.
Inter action with Owners Engineer, QA/QC and Vendor.

Pre commissioning

Hydro Test of piping and vessels,
Chemical Cleaning
Air Blowing, Wet/Dry Preservation
Pre commissioning Walk Downs with Owner's Engineer
Commissioning and Start up assistance
MCC punch clearing and inter action with Owner's Engineer for MCC.

Steam Turbine & Generators (TOSHIBA)

Commissioning & Start up Assistance.
Routine maintenance.
Rectifications & Modifications as directed by Design wing.
Co ordination with Owners Engineer & QA/QC.
Balance of Plant (BoP)

FUEL GAS SYSTEM:

Chemical Cleaning,
Air blowing,
Restoration, Integrity Testing, Gas charging and Leak test.
Commissioning Assistance and Routine Maintenance Activities.

HP/LP STEAM SYSTEM
Chemical Cleaning (HP STEAM).
Air Blowing (HP STEAM)
MCC Walk Downs & Punch Clearing
Routine and shut down Maintenance
Rectifications/Modifications.

DUMP CONDENCERS & SEA WATER SYSTEM

Routine & Shut Down maintenance

CHEMICAL CLEANING
Engineer in charge for all chemical cleaning activities in power plant.

AIR BLOWING /FLUSHING:
Air blowing of HRSG and Main Steam piping, Fuel Gas piping, Fuel Oil piping, and Piping for supplementary Fire system etc.

Weekly & Daily Briefing to Client & Owners Engineer

Co coordinating with Site Design Team and Interaction with Consultant.

Qualified Acceptor for ITM O&M PTWs

India:

October 2001-August 2004

Position: Mechanical Engineer
Employer: M/s Binees Engineering Constructions, KCCPP, NTPC, Choolatheruvu, Kerala-690506, INDIA.

Clients: Bharat Heavy Electricals Limited
National Thermal Power Corporation
Kerala Water Authority
Duties:
Mechanical Maintenance of Combined Cycle Power Plant.
Shut down Maintenance of Gas Turbines, HRSGs and storage vessels
Erection and Modification of piping and structures.
Maintenance and repair of clariflocculators, Pumps, Bridges and Filter beds in Water treatment plants.

January 2000-August 2001

Position: Engineer (Mechanical Maintenance),
Employer: Engenius Erectors Pvt Ltd, P.O.Box1055, Kilpauk, Chennai, INDIA-600010.
Client: National Thermal Power Corporation, Kayamkulam, Kerala, INDIA.
Project: 350 mw combined cycle power plant (2x115mw Gas Turbines&
120mw Steam Turbine)

May 1998-January 2000
Employer: Engenius Erectors Pvt Ltd, P.O.Box 1055, Kilpauk, Chennai, INDIA-600010
Project: 350 mw Combined Cycle Power Project
Client: National Thermal Power Corporation, Choolatheruvu, Kayamkulam, Kerala, INDIA.
EPC Contractor: Bharat Heavy Electricals Limited
Position: Mechanical Engineer (Gas turbine Installation, Pre –Commissioning and
Commissioning &Start up Assistance)
.
Worked as Mechanical Engineer for Installing, Pre commissioning, Commissioning and testing of 2x115 mw, Fr 9E Gas Turbines (GE&BHEL) and Accessories, including piping.

Duties:
Installation and alignment of Gas Turbines and Auxiliary units.
Installation,Pre commissioning and Commissioning assistance of Water Injection Skids, Water Wash Skid, Cooling Water Modules, Fuel Forwarding Pumps, Fans & Blowers.
Supervised commissioning of both the Gas Turbine Generator units.
Assistance in the start up and test run of the units.
Assistance in the Performance Guarantee Test for the 350 mw power plant.

January 1996-April 1998

Position: Site Engineer

Employer: Engenius Erectors Pvt Ltd

Client: Bharat Heavy Electricals Limited

Worked at Mettur Thermal Power Station, Tamil Nadu electricity board, Tamilnadu, INDIA as engineer for the Overhauling and Testing of 210 mw STG (unit -4).

WATER TREATMENT AND PUMPING
Worked with KERALA WATER AUTHORITY at the 86 MLD WATER TREATMENT and PUMPING STATION at ARUVIKKARA as SHIFT ENGINEER.
Completed many Routine and Breakdown Maintenance jobs at different Water Treatment Plants in Trivandrum, Kerala as a Contractor's Engineer

EDUCATION AND TRAINING

Bachelor of Engineering in Mechanical from Manipal Institute of Technology, INDIA.

Software used: MS office 2000, Primavera, MS Project

Personal Details:

Age & Date of Birth: 38, 7th September1969.
Sex: Male
Nationality: Indian
Marital Status: Married

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 3118)

Go to Search Parameters...

Brief Description

Quality Assurance/Control * Inspection & Project Engineering * Welding * NDT * Coating * Fabrication * Construction * Offshore and Onshore Gas / Oil / Gas Plants*Jackets / Topsides / Well sites / Pipelines / Piping / Structural / Pressure Vessels / Tanks /

Efficient planning for execution of project

Ph.D. materials engineer with 23 years of R&D experience in: a) Program management; b) Measurement of material properties Test method development and fixture design; c) Polymers, composites and their processing; d) Laboratory supervision and management of technical personnel.

Senior Geotechnical engineer with 7 Years of experience and having Masters Degree in Geotechnical engineering

computer skilled--ms word/excel/autocad, hardworking and honest

Geotechnical Engineer

27 Years of Indian and abroad experience as a worker, Foreman and as a Supervisor in Aluminium fabrication, Aluminium Cutting, Site fitting, Glazing, Glass, Silicon works and Site maintenance

OBJECTIVE: To be a Resident Engineer or a Project Manager.

NDT Level III

My experience in different Engineering Consultancy Company like SMEC International Ltd.as well International Contractor like Construction & Industrial equipment Ltd in St. Lucia, Caribbean Island, Strabag International assigned in Libya, Willbros International Inc.,Houston Texas, assigned in Nigeria

Thirty four years in piping design

Planning, Scheduling, Cost Control

HSE engineer

Power Plant Erection/Maintenance /Warranty Engineer

I'm having good knoweldge of Land Survey work and having sound knowelge of Microsoft Excel which is very much useful in estimation works

Geotechnical Engineer & Ph. D in Civil Engineering with 15 years experience work as University Researcher and Mainly as Freelance Expert-Consultant.

Civil Engineer

Senior Structural CAD Designer (direct & contract assignments)

I'm currently working at Doha, Qatar as a document controller for construction company.

Quality control manager - BE Metallurgy - Looking after all quality complaints, Metallurgical testing

Solution support engineer

PDS EERWAY Duct Bank, Cable Tray and Embedded Conduit Layouts

I would like to apply for the position of an Ship yard technician, Onshore/offshore entry level roughneck, roustabout My experience: Stick, mig and tig welding Burning equipment Current certifications Fork lift operator I am a self-motivated, honest, individual with effective communications skills

i have worked with many multi national firms.I want to obtain a position of Plant manager/Maintenance manager/Service manager in your company. I have done courses under shell company Safety awareness. Incident and injury free. Defensive driving. Safety induction.

Project Engineering, Construction, Contracts, Commissioning, Start Up.

More than nineteen years in the field of construction,some engineering & design works for oil& gas, petrochemical, power plant, expansion, revamp projects.

Senior Project Architect with extensive construction supervision and design experience willing to relocate to overseas/Middle East

-Mechanical Engineering, member of ASME, PMI, -computer skills include Primavera Project Planner & MS Project. -Sr. Maintenance/Project Planning/Scheduling Engineer -long experience in Oil & Gas Industry -Project Controls Engineer/Manager. -Fluent in English & Arabic. Canadian Citizen.

I'm presently working as Planning/Scheduler and at the same time Quantity Surveyor here in Yanbu, Saudi Arabia. Our on going project is the Royal Commission Field Office and 4 bridges.

Experience and skills: 1) Electrical Engineering, HT & LT systems, power systems, instrumentation and control. 2) Projects' management. 3) Service and customer support. 4) Sales and marketing. Worked for 3 years in Nigeria in various construction projects.

20+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Professionally qualified Civil Engineer with a PG degree in Construction Management with over 20 years experience in Asian Development Bank, World Bank and Other Internationally funded road projects in South East Asia and Pacific region.

Professional Electrical Engineer with 30+ years experience. In the latter 20 years my experience has been in a wide range of areas of project engineering predominantly in heavy industry. Looking for new challenges any location

Objective Seeking to advance my professional career in the international arena of constructionmanagement. Open for relocation to most any international project.

10+ years of experience in the field of GIS & construction industry with wide ranging domain and industry expertise.

pressure welder

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

I am a grduate in Civil Engineering and an Exprerience of 34 years as Civil Engineer (5years work experience at El Kufrah, Govt. ofLibya). I have acquired Diploma in Computers in Office management in the year 1991 & utilised M.S. Word & Excel while sending formats to the World Bank, New Delhi.

Seeking a job of Resident Engineer in Middle East (hoghways,infrastructure,buildings)holding more than 20 years experience in international companies.

Structural designer and progect engineer experienced in designing , supervising and progect management on large residental and industrial projects in Libya and Bulgaria,elegible to be member of Professional Engineers Association of Ontario, Exelent skill in desigh and inspection of steel and RCS

I have more than 15 years experience in safety and environmental policy implementation for construction sites , drilling , workovers and explorations, refineries, pipelines, shipyard and offshore/onshore oilfields installations.I worked with clients Bechtel, Technip, Chiyoda, Brown and Root, Flour D

I'm a civil engineer andhad worked in different countries. I've been in this field for about 20 years.

Thorough knowledge of all aspects involving residential,commercial and Industrial HVAC and Electrical systems. Extensive sxperience working and leading project teams worldwide in challenging technical environments and different cultures. Understanding and ability to work with other disciplines.

heighted , office oriented, global person

CNC Service Manager and Technician / Building Project Manager

Preparing Concrete profiles. „« Preparing P.T. Design Drawing and Shop Drawing as per the Engineers Design (ADAPT or RAM Programs).

Welding Inspector 3.1, Welding Engineer

Postgraduate in Civil Engineering with specialization in Infrastructure, Highways & Bridges, Soil & Materials engineering & Project Management Systems with about 17 years of professional experience in construction supervision, design of Highways & Infrastructure projects

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

I am civil engineer, working as consruction planning engineer at Mott MacDonald India from India And seeking job at Austrilia with visa support from employer.

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out