Resume - E&I Superintendent with a broad spectrum experience of electrical, instrument, a...

Misco Jobs

Resume #75642

CONTACT INFORMATION:
View contact information...

PROFILE
A HIGHLY COMPETENT SENIOR ELECTRICAL / INSTRUMENT SUPERINTENDENT - QA / QC ENGINEER with extensive experience on projects overseas – Algeria, Zambia, Saudi Arabia,
Bahrain, United Arab Emirates, Yemen, Qatar, Kazakhstan, Russia – who has developed:
* supervisory capabilities
* electrical / instrumentation expertise
* QA / QC inspection skills in all aspects including audit
* installation and maintenance expertise
* pre-commissioning, testing and commissioning competence
* safety awareness
* organising and co-ordinating flair
* fault-diagnosis and technical problem-solving talents
* the ability to communicate effectively at all levels
STRENGTHS
* Comprehensive industrial experience in Oil, Gas and Petrochemical sectors, as well as Airbase, Ministry of Defence and Aviation Projects.
* High ethical standards, hard-working, proactive, reliable, adaptable, creative, analytical and capable of using own initiative.
* Knowledge of US Electrical Standards, European and British Standards:
(BS), AP1, 54II EC, IEEE, ANSI / NFPA 70, PUE, SNIP, GOST, etc.

SUMMARY
* Electrical & Instrumentation Superintendent Jebel Ali 2008– Sep 08
* Electrical Verifier/Commissioning Engineer Sakhalin 2007-2008
* Senior QA/QC Electrical and Instrument Engineer Qatar 2005-2007
* Senior Electrical & Instrument Engineer Kazakhstan 2004-2005
* QA/QC Instrument Inspector Qatar 2003-2004
* Senior Electrical/Instrumentation Engineer Kazakhstan 2003-2003
* General Manager – Electrical/Instrumentation Qatar 2000-2003
* QA/QC Electrical Senior Inspector/Engineer Qatar 1997-2000
* Divisional Manager - Electrical/Instrumentation Qatar 1996-1997
* Electrical Consultant Yemen 1992-1996
* Electrical/Instrumentation Commissioning Consultant U.A.E. 1991-1992
* Processing Plant Manager/Chief Engineer Saudi Arabia 1984-1990
* Contracts Manager Zambia 1983-1984
* Freelance Technical Advisor M.E. & Africa 1980-1983

QUALIFICATIONS
1967 – 1972 5 year apprenticeship in Electrical Engineering
1967 - 1972 City & Guilds
1977 – 1980 BSc Electrical Engineering

COURSES
* Fire Detection and Prevention
* H.V. Transformer Maintenance
* Flash Testing
* H.V. Testing & Switching (66 kV)
* Power Generation and Distribution
* Fault Finding and Diagnosis
* Air Conditioning
* Refrigeration
* Safety Management/Awareness
* Quality Control to ISO 9000 & 9001 Standards
* Permit to Work Systems
* H2S Training

Feb 08 - Foster Wheeler Energy Ltd. Jebel Ali, UAE
Electrical & Instrumentation Superintendent
* Working on the Emirates National Oil Company ('ENOC') refinery expansion project. This covers Contractor E&I installations, QA/QC, Pre-commissioning and commissioning work.

Oct 07 – Jan 08 Bureau Veritas Sakhalin
Registered/Approved Shell Electrical & Instrumentation Verifier/Commissioning Engineer
* Short term contract working for the Client on the Sakhalin II Project which includes development project construction of the offshore processing facilities.

Aug 05 – Aug 07 Qatar Liquefied Gas Company (II) Limited Qatar
Senior QA/QC Electrical and Instrument Engineer
* Installation of the world's largest LNG Trains, LNG storage, condensate tanks and loading facilities on this upstream and liquefaction project. Covering all aspects of the electrical and instrumentation QA/QC policies, procedures, inspections and engineering concerns on this project.
2004 – 2005 AGIP KCO Kazakhstan
Senior Electrical / Instrument Supervisor
* AGIP Site Representative for the electrical discipline, Karabatan Oilfield, West Eskene.
* Seconded to the infrastructure and early works phase of this Field Development Project.
* Liaised with Main Contractor and reported to the Management Team on all matters re
Contractors Safety Management Systems, Quality Surveillance Program, as well as engineering problems and change proposals (including resolving technical queries).
* Subsequently supported the project completion, pre-commissioning and handover.
* Construction, supervision, inspection, testing and maintenance of 35 Kv, 10 Kv and 400v substations, 2MW standby genset, potable water treatment and sewage plants, storage tanks, cathodic protection, and electric and diesel fire pumps.

2003 - 2004 Velosi TUV Gulf Qatar
QA/QC Instrument Inspector
RasGas Trains 3 and 4 Expansion Project at Ras Laffan
* Monitoring the main contractors (CMS&A) inspectors and their sub contractor's inspectors, on construction of the Ras Laffan Expansion Project (LNG). Responsible to the client's quality manager for the day to day progress of the application for inspection to stringent QA procedures and test plans in operation at site. Also final sign off of all documentation for the MAPS system prior to final hand over to commissioning and operations for start up of plant.

2003 - 2003 Raytheon Technical Services Kazakhstan
Senior Electrical/Instrumentation Engineer
* Providing municipal backup site services for Tengiz Chevroil, Kazakhstan, covering all installations, maintenance, design assessment sign off, commissioning, troubleshooting sub stations, PPM of remote, pumping, compressors, air conditioning, and operations, implementing methods and procedures. Advised on cost saving techniques on international procurement of consumable spare parts by standardization and upgrade of material quality.

2000 - 2003 Amcon Electrical & Instrumentation Services Qatar
General Manager
* An electrical and instrumentation company specializing in the oil and gas industries onshore and offshore, pumping station upgrades, storage tanks, installations, inspections, design, design assessment, procedures, commissioning, maintenance of up to 33kV equipment, engineering and procurement of electrical and instrumentation spare parts.

1997 - 2000 JGC Kellogg Joint Venture Qatar
QA/QC Senior Electrical Inspector/Engineer for RasGas Onshore Facilities Project
* Responsible for the running and organization of the electrical QA/QC team on daily site inspections and co-ordination of same relating to construction and commissioning duties associated with a new grassroots LNG Plant at Ras Laffan, comprising: Utilities, Process Units (Trains 1 & 2), Condensate, LNG Storage & Loading, Marine Jetty / LNG Ship Loading Facilities, Effluent Treatment & Sulphur units. Equipment comprised 4 x 31.8MW (50MVA / 11kV) Gas Turbine driven Generators linked to Step-up Transformers (11kV to 33kV), 2 x Emergency Diesel driven Generators of 3.3MW at 6.6kV, 16 x Substations (33kV, 6.6kV, and 415V), Transformers, Motors / Compressors up to 9.8MW (6.6kV), UPS systems, Electric Trace heating, electrical installation activities relating to cabling and heavy electrical equipment etc. "Hands on" involvement & trouble shooting when and as required.
Responsibilities also included: - Reviewing and approval of all electrical procedures prior to submission to client, request for inspection notices etc, issuing & filing of completed inspection reports (to client), and other relevant QC documentation under ISO 9001 Standards (preparation of non conformance and material exception reports etc.) relating to the project. Set up, preparation and control of all electrical work permits (both company and JGC) and their issue, etc.

1996 - 1997 Rafaco Qatar
Divisional Manager
* Installation, maintenance, method statements, inspection, recommendation and procurement of spare parts, commissioning services, including substations 66kv, upgrading pumping stations and tank farm maintenance to the Oil and Gas sectors onshore and offshore Qatar.

1992 - 1996 Canadian Occidental Petroleum Limited (Now Nexen Inc.) Yemen
Electrical Consultant
* Responsible for building services and maintenance of offices and residential compounds, potable water distribution, sewage plants, air-conditioning, power generation, operational/load performance tests and preparation of project specifications, international selection of spare parts, procedures, and method statements, commissioning and maintenance of diesel gensets, including power distribution, 6.6kV sub stations, switching and training Yemeni electrical engineers in prime power generation, distribution, fault finding and diagnosis. Implementation of P.P.M. schedules for both electrical and mechanical engineers.

1991 - 1992 United Arab Emirates Armed Forces U.A.E.
Electrical / Instrumentation Commissioning Consultant
* Electrical/Instrumentation Commissioning Consultant with a direct contract to the United Arab Emirates Armed Forces. Design assessment, preparation of method statements, inspection and pre-commissioning 66 kV, 11 kV, 6.6kV, 3.3 kV switchgear and mains distribution, lightening protection and earthing systems, air conditioning, refrigeration, pumping stations for hazardous conditions to client's requirement.

1984 - 1990 RADWA Food Production Co. Saudi Arabia
Processing Plant Manager/Chief Engineer

* Responsible for the management of all engineering input for the company's modern food processing plant. This covered all corrective and preventative maintenance, installation and commissioning new plant and equipment. Heading up a 50-man multi-discipline engineering team, duties included the preparation of annual budgets, formulation and Implementation of PPM schedules, policies and procedures organization and control of maintenance stores and both local and international (European) procurement of spare parts, method statements, recruitment and trade testing of new engineering personnel, health and safety, progress reporting, etc. Works covered mechanical and electrical engineering, refrigeration (ammonia) and air conditioning as well as provision of assistance on various other projects on-site, e.g. power generation/distribution and desalination/ water treatment, oil related and hazardous conditions, including fuel lines and storage.

1983 - 1984 EMZ Zambia
Contracts Manager

* Responsible for the control of various electrical, instrumentation and mechanical industrial installations and maintenance contracts in the Zambian Copper Belt. This included universities, hospitals, airports and mines. Directly in charge of some 130 engineers of all disciplines. The duties entailed the complete contract supervision from planning and mobilisation through to acceptance handover. This also included the budget control and profitability. Also responsible for the control of all stores and purchasing (local and international).

1980 - 1983 Freelance Technical Advisor Middle East & North Africa
Freelance Technical Advisor

* Employed on the installation/commissioning and maintenance of generators and mains distribution, medium and high voltages, instrument loop checking, air conditioning, installations, commissioning of remote pumping stations and fuel storage tanks, water treatment/services and fire prevention/detection systems, international selection and procurement of spare part. During this period I worked for a number of companies in the Middle East and North Africa.

EARLY CAREER
1977 – 1980 Part time Freelance Engineer / Studying for BSc

1975 – 1977 Installation & Commissioning Engineer: DME Greece
* Installation and commissioning of air conditioning, refrigeration, mains distribution, fire detection, etc. throughout the Middle East with specific reference to computer installations. During this period gained extensive experience in uninterruptible power supply (UPS systems).

1974 – 1975 Electrical Fitter: Central Electricity Generating Board U.K.
* Employed on shift maintenance of an oil fired power station, HV side

1972 – 1974 Air-conditioning Engineer: Denco Miller Ltd. U.K.
* On completion of apprenticeship employed on the installation and commissioning of air conditioning, fire detection and HV/MV mains distribution.
1967 – 1972 Apprentice Electrical Engineer (Maintenance): Sun Valley Poultry Ltd. U.K.
* Acquired valuable training on the 5-year Apprenticeship Programme

EXPERIENCE INCLUDES:
* Contract Management from initial planning to acceptance handover including progress reporting, design assessment and client liaison
* Estimating, budgeting and cost control
* Manpower planning, resource management and personnel recruitment in the Middle and Far East
* Formulation and implementation of planned electrical, mechanical and refrigeration maintenance schedules
* Spares/materials procurement (local and international stock control)
* Knowledge of European and US Electrical Standards including:
* British Standards (BS), API, 54II EC, ANSI/NFPA 70, IEEE, ISO, CSA, UL, NEC, A.P.I. etc.
* Compilation of documentation for electrical, instrument commissioning, maintenance and system plant validation.
* Quality control, health and safety, training.
* Planning and execution of the following:
* inspections, investigations, PPM, safety, environmental controls and preparing emergency procedures;
* reviewing operating costs;
* commissions and maintains utilities, process units, condensate, sulphur and storage, gas turbines and other major prime power gensets;
* have considerable experience in codes of practice in L & G plants, refineries, pumping stations, fuel storage tanks, petrochemical, power stations, desalination plants, ammonia systems and heavy industries;
* develops plant/section interest for subordinates;
* Reports to senior management, superintendents, and third party inspection consultancy.
* Supervision and co-ordination of multi-discipline engineering teams and a multi-national labour force.
* Exceptional communicator with the ability to relate to people at all levels.
* Project engineering, plant construction, hook-up, loading of hydrocarbons, and plant start of projects between $250K- $12Billion.

REFERENCES: Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 3125)

Go to Search Parameters...

Brief Description

5 yrs experience in crushing & asphalt operation,maintenance,motor control centre,inventory control,switchgear.

2D and 3D cad applications - upstream and downstream experience

12 Years experience in civil engineering, design, procurement, construction & supervising of particular relevance to the project are as follows :

10 Year Experience, 5 years Implementing SAP FI/CO and BW / BI / Netweaver Solutions for Banking, Manufacturing, Sea port industry, Maintaining SAP BW Solution for Oil and Gas Industry

Quality control, Inspection, Installation/erection of pipes and piping components, HVAc, HSE, Computer literate

I am a geologist with multidisciplinary experience, including experience in geotechnical engineering, mining, exploration, tunneling, groundwater, drilling, environmental and construction monitoring. I am a licensed monitor well driller in Nevada and OSHA Hazwoper, MSHA, SWPPP and nuclear gauge cert

DCS and instruments el.engineer.International experience.Experience in Chemical,mainly in Pulp and Paper (equipment-similar to used in Oil&Gas,Cement,Fertilizers,etc)Industry

Mechanical Engineer with expereince in AutoCAD 2000, Piping, Welding, Installation and Erection Works, Production Plainning, Supervision

Graduate Mining Engineer with MBA & First Class Mine Manager's Certificate having 22+ yrs. Hard Rock Large Highly mechanised hands on experience in Mine Operation, Drilling & Blasting, Mine Planning, Contracts Management, Waste Dump & Haul Road, Mine Dewatering

Junior project manager

Land surveying relating to boundaries, design, construction, and mapping.

12 years experience in all aspects of telecommunications. Excellent written and communication skills. Highly organized. Ability to work on multiple assignments. Excellent problem solving skills. Able to meet deadlines and schedules. Start of to completion of projects to include ordering, insta

Motivated, proven performer with a 17 year record of demonstrated success in Operations Management, Project Management, Distribution/Logistics Management, and Mechanical Engineering across multiple fields from Military Operations, Municipal Management, Telecommunications, Software Development, Call

I am a BS Mechanical Engineer who had served primarily as a Senior Fire Protection-Applications and Design Engineer for around 17 years plus and 5 years as an Occupational, Health and Safety practitioner in a petrochemical industry with a primary function as Fire Safety Engineer. My specialty profe

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

A graduate in biomedical engineering with over 5 years of experience in Medical equipment planning, procurement, design assisstance, primary level maintenance in Health Care/Hospitals and developing Management Information System of Biomedical Department

Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

I have eight years experience in major civil works projects such as,bridges and metro rail projects.

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

Construction Project Controls Manager (PMP Pending)

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

E&I Superintendent with a broad spectrum experience of electrical, instrument, and mechanical engineering acquired throughout a thirty year career. 27 years of my experience represents working directly for the Client within the O&G industry, on multi-discipline task force projects, including PMT.

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

International Project, Construction, and Contract Management

Diploma in Quantity Surveyor

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

SDS2, Xsteel, AutoCAD Steel Detailer.

ITI in Draughtship

Create learning opportunity to work in architectural firm and deal with many graphic jobs.

Project Engineer (Instrumentation & Control)

System Administrator, Server Support, Network Administrator, Desktop Support, ADS, DHCP, CCNA, MCSE

Construction Electrical and Instrumentation Engineer

Qa/Qc Inspector

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

I am a highways designer, designed more than 50 link roads, 2000 kms length all over Egypt, Yemen repuplic, & KSA.Using thelatest versions of Autodesk, Also I have a good expeience in the field of design Water & Waste Water networks

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I describe myself as Sincere and perseverance to Hard work. I had completed my Bachelor of Civil Engineering in First Class From a reputed institution in Tamil Nadu, India.

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

Geotechnical Engineer

I have recently finished my undergraduate study in Mechanical Engineering, Institute Technology of Bandung, Indonesia. I am looking forward to having a career which has strong relation with my educational background.

Working in the Kingdom of Saudi Arabia for the last 9 1/2 years. Well experienced in the design and execution of all types of HVAC systems, plumbing systems including water supply, Sewage/drainage system and Fire fighting system.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out