Resume - working in Ras gas - qatar as an instrument technician with 14 years experience....

Misco Jobs

Resume #76174

CONTACT INFORMATION:
View contact information...

Instrument Technician

CAREER OBJECTIVE

To make the best of my knowledge and experience thereby contribute to the growth of the organization and myself.

Total Experience ~ 14 Years

TECHNICAL EXPERTISE

* Good working knowledge in various field process instruments.
* Calibration and pre-commissioning checks on field instrument devices, transmitters, actuators etc.
* Fault finding diagnostics on devices as required.
* Support specialist vendors on commissioning of the control valve's and anti surge control system.
* Maintenance and servicing work on instrumentation devices and systems.
* Having good exposure in MAX 1000PLUS+, yokagawa CS 3000, FOXBORO I/A Series, DCS systems. Siemens, Honeywell PLC systems and installation, testing and commissioning the systems.,
* Preparation of specifications / data sheets / Loop sheets / Hookup drawings / P&ID's for field and control room instruments.
* Having good practice to work in permit to work procedures.

Overseas oil field experience

I) Transfield Worley Trags – Qatar

Period: Sep 2008 - Till date
Designation: Instrument Technician

Working at Ras gas Ltd – Qatar.

II) TSKJ NIGERIA LTD- BONNY ISLAND,NIGERIA.

Period: SEP. 2007 – DEC.2007
Designation: Sr.Instrument Technician

Worked in Train – 6 Project of NIGERIA LNG. (NLNG) - BONNY ISLAND, NIGERIA. Under the joint venture of Kellogg Brown & Root(KBR), Technip of France, Italy's Snamprogetti, and Japan Gasoline Corp. (which is known as TSKJ).

III) MIDDLE EAST GENERAL ENTERPRISES CO.ABUDABHI – UAE

Period: JAN. 2007 – APRIL - 2007
Designation: Instrument Technician

Attended two major shutdowns in Gasco projects. And Worked in Mubbaraz Island by manpower supply contract. (Details are given below)

Gasco – NGL down stream facilities - Ruwais, Abu Dhabi, UAE.
From: 21/01/2007 to 07/02/2007.

Gasco – NGL upstream facilities - BAB - Habshan, Abu Dhabi, UAE.
From: 25/03/2007 to 05/04/2007.

IV) M/S. SPECIAL TECHNICAL SERVICES L.L.C - OMAN

Period: Feb. 2006 – Aug - 2006
Designation: Sr. Instrument Technician

Worked in Petroleum Development Of Oman (PDO). By Engineering and Maintenance contract.

V) NATIONAL PETROLEUM CONSTRUCTION CO (NPCC),
ABUDHABI – UAE

Period: From April 2004 to May 2005,
Designation: Instrument Technician

Worked in OFFSHORE PLATFORM CONSTRUCTION FACILITIES at Mushafa – Abu Dhabi, UAE.

VI) NAFT SAZEH QESHM (NSQ) – IRAN

Period: From April 2003 to August 2003,
Designation: Instrument Technician

Worked in OFFSHORE PLATFORM CONSTRUCTION FACILITIES at QESHM – IRAN.

SHIP YARD EXPERIENCE

VII) SAOOD SERVICES ESTABLISHMENT (SSE) – BAHRAIN

Period: From September 2000 to May 2002,
Designation: Instrument Technician

Worked in ARAB SHIP BUILDING & REPAIRING YARD (ASRY) - BAHRAIN,

VIII) WELL WIN INDUSTRY LIMITED. ANDAMAN

Period: From Oct 1999 to Nov 1999.
Designation: Instrument Technician

Worked as Instrument Technician in Indian Navy Ships at Port Blair – Andaman.

Oil field experience in India

1. Employer: Protech Control Pvt Ltd.

Location: Hindustan Petroleum Corporation Ltd. (HPCL)
Vishakhapatnam

Designation: Instrument Technician

Period of Work: from May 1999 to Oct. 1999.

2. Employer: Wintech Instruments & Technologies Pvt. Ltd.

Location: Numaligrah Refineries Ltd. (NRL), Assam.
Reliance Petroleum Ltd. (RPL). Jamnagar.
Gujarat.

Designation: Instrument Technician

Period of Work: From Aug 1998 to April 1999.

3. Employer: Sharp Electricals

Work Location: Madras Refineries Limited (M.R.L.)

Designation: Industrial Electrician.

Period of Work: From Nov. 1997 to July 1998.

4. Employer: Annapurani Engineering Works.

Work Location: Madras Refineries Limited (M.R.L.) &
Tamilnadu Petro products Ltd. (TPL).

Designation: Instrument Electrician

Period of Work: From June 1995 to Nov. 1997.

5. Employer: Sarayu Engineering Co.

Work Location: TamilNadu Petroproducts Ltd. (TPL).

Designation: Industrial Electrician.

Period of Work: From April 1993 to May 1995.

Power plant experience in India

1. Employer: Chalcedony Hi -Tech Pvt Ltd.
Location: Hyundai Heavy Industries Co. Ltd. (O&M)
GMR Power Corporation Pvt Ltd.
200 MW DEPP. Chennai.

Designation: Instrument Technician
Period of Work: Sep '03 to Mar '04 & July 2002 to March 2003.

2. Employer: Annapurani Engineering Works.

Work Location: Hyundai Heavy Industries Co. Ltd. (O&M)
GMR Power Corporation Pvt Ltd.
200 MW DEPP. Chennai.

Designation: Instrument Technician

Period of Work: From Nov. 1999 to Sep. 2000.

PROFESSIONAL QUALIFICATION

o Vocational diploma in Electrical o Diploma in Electronics and Telecommunication Engineering.

OTHER ACTIVITIES

o Experience in work preparation, Documentation, Instrumentation workshop maintenance & Test equipments maintenance.
o Can control large group of manpower.
o Able to work as supervisor o Good Knowledge in Window XP.

PERSONALITY
* Hard-working, active, confident and highly self motivated
* Adaptable and able to work independently and as part of a team
* Optimistic and having good interpersonal skills
PERSONAL INFORMATION

Date of Birth: 14/11/1977
Sex: Male
Marital Status: Married
Nationality: Indian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 3118)

Go to Search Parameters...

Brief Description

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Exposed in several construction company involved in Engineering Procurement Installation Commissioning and Build Operate Transfer type of Contract at Oil & Gas, Petrochemical and Power Plants. In addition to that I’ve been in the Operation and Maintenance a couple of years at the Refinery and Petroc

Plant Inspector or Quality Assurance/Control Inspector API 510/ AWS CWI

Senior piping designer

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

A suitable position in the area of electrical schematic drawings and designing of electrical panel boards, cable layouts, etc. and/or designing of electronic circuit layout and PCB by using CAD software .

Mechanical Engineer

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Experice engineer with project engineering and project managemnt

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Transmission Engineer- power system circuit and substation design & planning

Mechanical Engineer, with 14 years exp, expertise in construction, marines structures, fabrication of offshore, marine structures and ship repairs, quantity surveying, planning and scheduling, cost estmating

Instrumentation & Control Engineer with over 14 year experience in Basic & Detailed Engineering, Supervision, Commissioning of off shore / on shore fields. Profitional in Field Instrument, DCS, Automation, HV/LV Elect Switchgears.

Post graduate Engineer with experience in marketing, engineering, insurance survey.

Can estimate cost for any construction project

P.E. Electrical with 20+ vears, Specilize in power distribution and electrical maintenance for mining and heavy industrial equipment

APPLY FOR THE POST OF QA /QC API 510 PRESSURE VESSEL INSPECTOR – CSWIP 3.1 WELDING INSPECTOR, BGAS-CSWIP PAINTING INSPECTOR, NDT, DOCUMENTATION

I am an Oil & Gas Facilities Project Engineer (B.Sc. in Mechanical Engineering, 1980) My duties are to develop, supervise, and execute design, procurement and construction of engineered hydrocarbon projects.

Soil investigation and plinning work

Testing & comissioning of control panels with good knowledge of design.

Have good working knowledge of AutoCad 2002, AutoCad 2004, Adobe PhotoShop, CorelDraw, Microsoft Excel, Microsoft Word, 3D Max Studio, A.D.T., Micro Station and Internet.

I want to work as a project engineer and/or site engineer

Three and half year experience in CADD software like Unigraphics, AutoCAD 2000 for 3D modeling, Composite Design, Assembling and detail drafting.Knowledge in fundamentals of Computer Graphics under Unigraphics for Helicopter components, assembly, subassembly, part drawings etc.

12 yrs. of underground mining, Electrician, All around maintance Man, Heavy Equipment Operator, Gas & Diesel Mechanic, Small Engine Repair, Carpenter, Mason. Plumbling.

10 years drafting experience for AT&T, and Verizon, Read and interpret construction notes and drawings. I strive for excellence in everything I do.

Experienced Cad Operator in Architectual, Civil, & Telecomunications

I am a post graduate in Production engineering with over 18 years of experience in heavy earth moving equipment and auto vehicles

Electrical Project Planning Engineer (Primavera P3 & P6) with MBA Degree

Project, Project manager, maintenance, maintenance manager, production, production manager, mining, heavy equipment

Controls Engineer, ControlLogix, Manufacturing Engineer, Engineering Manager, PLC Programming, Robotics, Machine Vision

Mechanical design Post Graduate with 9 Years of experience in process industry and design of tank, vessels, EPC packages, other static and rotating equipments like pumps, compressors, turbines, agitators, etc.

Lincensed Professional Land Surveyor

Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,

Mechanical foreman and non-destructiv testing inspector

Environmental Management & Permitting/Mining - Oil & Gas - Power - Infrastructure - Construction/Domestic (USA) & International

Senior Mechanical Draughtsman(MEP)

6 G WELDING (GTAW / SMAW) (welder job)

MECHANICAL/ PIPING/ FABRICATION ENGINEER 4 YEAR TOTAL EXPERIENCE INCLUDES 2 YEAR SAUDI AABIA EXPERIENCE

9 + year Experienced senior Document Controller having 5+ year Overseas experiance in india,Dubai and presently working in singaopre , in a world leading EPCM company

CIVIL ENGINEER WITH 17 YEARS EXPERIENCE IN BUILDINGS, INFRASTRUCTURES, TREATMENT PLANT AND OIL & GAS INDUSTRY

Marine chief engineer(unlimited)- shipbuilding supt, A team player,good manmanagement qualities,likes to involve in a project from concept to completion within strict time/budget controls.

Sir, Are You seeking an intelligent Graduate Mechanical engineer with extensive problem solving and technical skills? If so, my 3 Yr experience in mechanical engineering background may be of interest to you. Thanking you for your time and consideration.

civil engineer

Fresh Structure Engineer from Nirma Institute of Technology, Ahmedabad, India

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out