Resume - I am a geologist with multidisciplinary experience, including experience in geot...

Misco Jobs

Resume #76980

CONTACT INFORMATION:
View contact information...

EXPERIENCE

6/07 – Present, GEOLOGIST/INSPECTOR, Kleinfelder, Las Vegas, Nevada
Observe grading operations, drill shafts and soil nails at McCarran Airport. Log soil and core borings and trenches. Perform perc tests. Perform GPS survey for SNWA pipeline. Map earth fissures.

4/07 – 6/07, GRADING INSPECTOR, Angle Engineering, Las Vegas, Nevada
Observe grading operations for residential and hillside developments with problem soils. Perform density/moisture tests.

10/05 – 4/07, GEOLOGIST, PSIUSA, Las Vegas, Nevada
Perform core logging for mountainous subdivision and road cuts to identify landslides near the Wasatch Front. Installed inclinometers in landslide areas. Observe grading operations for commercial, residential and hillside developments in Las Vegas. Observe fabric lining of channel, installation of rockery walls, and trenching for utilities. Perform density and percolation tests.

3/05 – 10/05, STORM WATER INSPECTOR, Paradigm Engineering, Las Vegas, Nevada
Inspect residential and developmental construction sites for storm water compliance.

6/03 – 2/05, CONTRACT GEOLOGIST, CivilWorks, Las Vegas, Nevada
Conduct Phase 1 and 2 environmental site assessments and write reports.

10/02 – 3/03, GEOLOGIST, ONSITE / KHM Environmental, San Jose, California
Logged and sampled drill cuttings and measured VOC's with PID, installed monitor wells for Shell Service Stations in California and Nevada as part of their groundwater assessment program.

6/02 – 9/02, GEOLOGIST, ONSITE / SCS Engineers, Las Vegas, Nevada
Measured water levels and installed transducers in wells. Downloaded dataloggers. Performed GPS surveys and calibrated methane monitoring equipment at the Sunrise Mountain Landfill.

11/98 – 3/02, CONTRACT GEOLOGIST, Nye County Nuclear Waste Repository Project Office, Pahrump, Nevada.
Logged and sampled drill cuttings, installed monitor wells and Westbay systems, and assisted with pump tests for the Early Warning Drilling Program to monitor possible down-gradient contamination from the proposed Yucca Mountain repository. Canvassed wells and measured water levels in the Pahrump and Amargosa Valley area. Prepared procedures.

3/97 - 9/98, SENIOR GEOLOGIST, SAIC, Yucca Mountain, Nevada.
Logged and sampled core from underground and surface drilling operations and instructed other geologists on QA procedures. Performed duties of drilling engineer.

3/95 - 3/97, GEOLOGIST, Agapito Associates, Yucca Mountain, Nevada.
Performed construction monitoring of 25-foot diameter exploratory tunnel for high-level radwaste repository. Provided design verification for tunnel support through rock mass quality data.

6/92 - 9/94, GEOLOGIST, Raytheon Services Nevada, Mercury, Nevada.
Collected, interpreted, and reported geotechnical data in support of site characterization studies for low level radioactive waste management sites including collapse zones and chimneys beneath nuclear-generated craters. Supplied geologic support to Odex drilling, instrumented pilot wells, sampling, and testing phases of program. Containerized waste for shipping. Measured water levels, collected water samples, and performed recovery tests. Tested samples for volatile hydrocarbons, radioactivity and magnetic susceptibility. Performed geologic mapping and sampling of trenches. Prepared test plans, SOPs, and wrote reports.

1/85 - 3/92, STAFF GEOLOGIST, Sergent, Hauskins & Beckwith (AGRA), Phoenix, Arizona.
Supervised geotechnical and hydrogeologic investigations for buildings, dams, storage tanks, highways, transmission lines, pipelines, landfills, sewage treatment plants, power plants, low-level radioactive disposal sites, leach pads and mining facilities in Arizona, California, Nevada, Utah, Texas, Colorado and Wyoming. Field functions included sampling and logging of soils and rock, trench logging, geologic mapping, fault investigations, landslides and rock falls, installation and development of monitor wells, pump testing and permeability testing. In addition work was performed on underground storage tank removals and evaluations of aggregate and borrow sources. Office functions included report writing, slope stability analysis, applying for well permits and variances, writing environmental site assessments, mine permits, preparing request for proposals, QA/QC procedures, budgets and schedules.

1/83 - 1/85, CONSULTING GEOLOGIST, Elko, Nevada.
Performed gold exploration using drilling and geophysical methods. Staked mining claims. Drilled, blasted, loaded and hauled rock for rip rap. Inspector for a 34-lot subdivision. Prepared inventory of water resources and collected and ran field tests on water samples for the B.L.M.

4/81 - 1/83, SENIOR GEOLOGIST, Eisenman Chemical Company, Elko, Nevada.
Developed two major barite deposits. Performed core logging, geologic mapping and geophysical surveys. Calculated ore reserves and prepared mining plans. Evaluated barite, hematite and bentonite prospects in Nevada, California and Texas.

7/75 - 4/81, ENGINEERING GEOLOGIST, Bechtel Civil & Minerals, San Francisco, California, Bethesda & Gaithersburg, Maryland.
Supervised all aspects of subsurface investigations for power plants and other structures throughout the United States and St. Croix. Office functions included preparation of proposals, schedules, budgets, specifications, geotechnical reports and responses to Contractor's claims for differing site conditions. Field activities consisted of core logging, supervising the installation for monitor wells and piezometers. Performed pump tests and permeability tests including packer, falling head and constant head tests. Monitored blast vibrations and supervised and monitored instrumentation to measure rock and soils movement including strain gauges, inclinometer and extensometers. Conducted extensive geologic mapping of excavations and tunnels for the Washington, D.C. and Boston rapid transit systems.

12/74 - 7/75, EXPLORATION GEOLOGIST, Phillips Petroleum, Casper, Wyoming.
Conducted uranium exploration in the Powder River Basin. This included logging drill holes, assessment work, interpreting geophysical well logs and calculating ore grade and reserves.

4/72 - 8/74, ENGINEERING GEOLOGIST, Bechtel Power Corporation, Norwalk, California.
Supervised subsurface investigations for nuclear and coal-fired power plants, cooling ponds and dams. Performed geologic mapping, soils and core logging, trench logging and geophysical well log interpretation. Conducted exploration for rip rap, limestone and lignite. Correlated coal seams, prepared isopach and structural contour maps and calculated reserves for Kaiparowits coal deposit in southern Utah. Conducted reclamation and reseeding of area.

9/70 - 1/72, SENIOR GEOLOGIST, Hall, Relph & Associates, Pty. Ltd., Sydney, Australia.
Conducted exploration for sedimentary uranium deposits including siting of drill holes, logging core and drill cuttings and geophysical well log interpretation. Performed geochemical surveys.

6/69 - 7/70, EXPLORATION AND MINING GEOLOGIST, Milchem Inc., Battle Mountain, NV. Responsible for all aspects of exploration and development of barite properties, including siting drill holes. logging core and cuttings, geologic mapping, surveying, claim staking, assessment work, ore grade control, blasting, geophysical surveys and metallurgical testing. Also evaluated barite, fluorite, gold, silver and mercury prospects.

EDUCATION
B.S. Geology, University of Nevada, Reno, 1969
REGISTRATIONS, LICENCES & CERTIFICATIONS
Professional Geologist: Alaska, Licensed Monitor Well Driller: Nevada. OSHA 40-Hour HAZWOPER. MSHA 24-Hour Surface Mining, Portable nuclear gauge and Hazmat certificates. SWPPP Inspector certification. Clark County, NV approved grading (G) and drill shaft (R) inspector

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 3123)

Go to Search Parameters...

Brief Description

5 yrs experience in crushing & asphalt operation,maintenance,motor control centre,inventory control,switchgear.

2D and 3D cad applications - upstream and downstream experience

12 Years experience in civil engineering, design, procurement, construction & supervising of particular relevance to the project are as follows :

10 Year Experience, 5 years Implementing SAP FI/CO and BW / BI / Netweaver Solutions for Banking, Manufacturing, Sea port industry, Maintaining SAP BW Solution for Oil and Gas Industry

Quality control, Inspection, Installation/erection of pipes and piping components, HVAc, HSE, Computer literate

I am a geologist with multidisciplinary experience, including experience in geotechnical engineering, mining, exploration, tunneling, groundwater, drilling, environmental and construction monitoring. I am a licensed monitor well driller in Nevada and OSHA Hazwoper, MSHA, SWPPP and nuclear gauge cert

DCS and instruments el.engineer.International experience.Experience in Chemical,mainly in Pulp and Paper (equipment-similar to used in Oil&Gas,Cement,Fertilizers,etc)Industry

Mechanical Engineer with expereince in AutoCAD 2000, Piping, Welding, Installation and Erection Works, Production Plainning, Supervision

Graduate Mining Engineer with MBA & First Class Mine Manager's Certificate having 22+ yrs. Hard Rock Large Highly mechanised hands on experience in Mine Operation, Drilling & Blasting, Mine Planning, Contracts Management, Waste Dump & Haul Road, Mine Dewatering

Junior project manager

Land surveying relating to boundaries, design, construction, and mapping.

12 years experience in all aspects of telecommunications. Excellent written and communication skills. Highly organized. Ability to work on multiple assignments. Excellent problem solving skills. Able to meet deadlines and schedules. Start of to completion of projects to include ordering, insta

Motivated, proven performer with a 17 year record of demonstrated success in Operations Management, Project Management, Distribution/Logistics Management, and Mechanical Engineering across multiple fields from Military Operations, Municipal Management, Telecommunications, Software Development, Call

I am a BS Mechanical Engineer who had served primarily as a Senior Fire Protection-Applications and Design Engineer for around 17 years plus and 5 years as an Occupational, Health and Safety practitioner in a petrochemical industry with a primary function as Fire Safety Engineer. My specialty profe

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

A graduate in biomedical engineering with over 5 years of experience in Medical equipment planning, procurement, design assisstance, primary level maintenance in Health Care/Hospitals and developing Management Information System of Biomedical Department

Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

I have eight years experience in major civil works projects such as,bridges and metro rail projects.

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

Construction Project Controls Manager (PMP Pending)

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

E&I Superintendent with a broad spectrum experience of electrical, instrument, and mechanical engineering acquired throughout a thirty year career. 27 years of my experience represents working directly for the Client within the O&G industry, on multi-discipline task force projects, including PMT.

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

International Project, Construction, and Contract Management

Diploma in Quantity Surveyor

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

SDS2, Xsteel, AutoCAD Steel Detailer.

ITI in Draughtship

Create learning opportunity to work in architectural firm and deal with many graphic jobs.

Project Engineer (Instrumentation & Control)

System Administrator, Server Support, Network Administrator, Desktop Support, ADS, DHCP, CCNA, MCSE

Construction Electrical and Instrumentation Engineer

Qa/Qc Inspector

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

I am a highways designer, designed more than 50 link roads, 2000 kms length all over Egypt, Yemen repuplic, & KSA.Using thelatest versions of Autodesk, Also I have a good expeience in the field of design Water & Waste Water networks

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I describe myself as Sincere and perseverance to Hard work. I had completed my Bachelor of Civil Engineering in First Class From a reputed institution in Tamil Nadu, India.

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

Geotechnical Engineer

I have recently finished my undergraduate study in Mechanical Engineering, Institute Technology of Bandung, Indonesia. I am looking forward to having a career which has strong relation with my educational background.

Working in the Kingdom of Saudi Arabia for the last 9 1/2 years. Well experienced in the design and execution of all types of HVAC systems, plumbing systems including water supply, Sewage/drainage system and Fire fighting system.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out