Resume - Quality control, Inspection, Installation/erection of pipes and piping component...

Misco Jobs

Resume #77006

CONTACT INFORMATION:
View contact information...

INSTITUTIONS / DEGREES OBTAINED WITH DATES:
AMBROSE ALLI UNIVERSITY (AAU) EKPOMA, EDO STATE, NIGERIA
B.ENG. (Hons) Mechanical Engineering (2ND CLASS {Hons} LOWER DIVISION) 1999
FEDERAL SCHOOL OF ART & SCIENCES, LAGOS NIGERIA
WEST AFRICAN EXAMINATION COUNCIL (W.A.EC). 1989

WORK EXPERIENCE
COMPANY: ETCO NIGERIA LIMITED BONNY ISLAND JAN.2006-TILL DATE
PROJECT: NIGERIAN LNG SIX PROJECT BONNY ISLAND
SCOPE OF WORK:
Installation of Ventilation and Air Conditioning (HVAC), Electrical Installations and Plumbing works in Substations
(SS) 6, 34, 35, 36, 37 and Field Auxiliary Rooms (FARs) 17, 18, 19.
Installation of air conditioners and general plumbing systems for wastes, fire fighting and water supply lines in
Nigeria LNG shutdown canteen, MSC workshop, MES (Mobile equipment store) and NCY (New Construction yard).
Including fan-coil units, duct works.
POSITION: QA/QC INSPECTOR (MECHANICAL)
Job Responsibilities:
Perform quality inspection activities on mechanical equipment, materials and packaged units on arrival at site and before installation, in accordance with Project Quality Plan and material specifications.
Inspection of HVAC tubing and general pipe installation.
Perform witness inspections and monitor setting, leveling and completion of packaged units.
Prepare Test packages for the pressure, hydro and gravity testing of Refrigerant, sanitary and water drinking lines. Inspect all ventilation installation such as ducts, gas tight dampers, blast proof valves, back draft dampers and various other accessories including completion/functional checks.

Inspect all plumbing works as regards to drainage, water supply and roof rainwater down pipes (both above ground and underground)
Log in for and Witness field tests and inspections according to ITP (Inspections and Tests Plan) and QCP (Quality control Procedures).
Co-ordinate all tests and assist the project manager in supervisory roles.
Give all quality reports and updates to the Quality Control manager.
Carry out tests on the split-units such as air flow test, fan and motor speed and make proper setting of the low and high pressure sensors and temperature settings.
Take part in on-site quality management audit
Inspect and record all measuring instruments; ascertaining their validity with the calibration certificates.
Inspect and co-ordinate the disinfection (sterisation) and flushing of portable water supply lines.
Take active part in the commissioning of all the HVAC units with the vendor.
Carry out Inspection with the Client and sign off documents.
Witness functionality and acceptance tests and perform final quality check prior to acceptance of equipment and materials as appropriate.
Witness and carry out noise level test, temperature and humidity tests
Prepare AS BUILT drawings for all mechanical and HVAC installation making sure that all documents were fully submitted to the client.
Prepare/collate data for final hand over to the client.
Clearing of punch items.
Represent ETCO as warranty Engineer for the HVAC units in SS34, 35, 36, 37 FAR17, 18 and FAR19 respectively.
COMPANY– HYUNDAI HEAVY INDUSTRIES (HHI) BONNY ISLAND May 2005- JAN 2006
PROJECT: SPDC (BONNY TERMINAL INTEGRATED PROJECT {BTIP}) TANK FARM
POSITION: Field Engineer (Piping)
Job Responsibilities:
Scheduling of work, supervising and overseeing work progress.
Help in coordinating various teams and assigning work to each foreman.
Collate data.
Take active part in general commissioning processes in the installation and Re-instatement of pipe spools, valves, gaskets, and various other fittings.
Carry out on-line inspection of lines to make sure that permanent gaskets were used where they ought to as well as making sure that bolts and nuts were coated with anti- rust materials (molycoat).
Hold daily meeting with mechanical fitters and other members of the crew.

COMPANY: CHICAGO BRIDGES & IRON (CB & I) BONNY ISLAND. SEPT. 2004 - APR. 2005
PROJECT: CONSTRUCTION OF TRAIN 4 OF THE NIGERIAN LNG BONNY ISLAND.
POSITION: Piping Engineer (Field Engineer Area 4 & 5)
Job responsibilities:
Hold daily S.T.A.R.T meetings and ensure maximum participation and safety application at site.
Liaise with the area superintendent in organizing, supervising and overseeing work progress.
Carry out scheduling of work for each week and for each foreman in both area 4 and 5 of Nigerian LNG train 4.
Collate data and give daily report of work progress.
Evaluate works in field piping and supports installation.
Give instruction to fitters on proper ways of bolt-ups, flange face alignments and personally supervise the installation of thermo wells, control valves and various other instruments valves
Inspect and coordinate the installation of on-line valves (such as ball valves, gate valves, Relief valves, butterfly valves, control valves, globe valves, check valves, etc) with own team.
Inspect and coordinate the installation of pipe supports (such as cold/special supports, trunnions, spring hangers/hangers, slide plates, brackets etc) with own team.
Take all field reports and discrepancies for generation of field inspection reports (F.I.R), field modifications (F.MOD)
or construction technical query (CTQ) depending on the situation.
Run field check of punch lists and sign off same when completed.
Coordinate and take part in the Hydro testing of pipes.
Request for materials from the warehouse and lay down area when needed in the field.
Attend to fitters and help in interpreting critical drawings.
Report work progress and daily liaise with area superintendent.
COMPANY: JESVAL NIGERIA LIMITED BONNY ISLAND APR.2003 – SEPT. 2004
PROJECT: REMEDIATION WORKS (Environmental Protection Services)
IN SPDC TANK FARM, BONNY ISLAND TERMINAL.
POSITION: SAFETY OFFICER
Job Responsibilities:
Prepare and carry out daily safety briefing (PEP TALK)
Create awareness in health, safety and environment and maintain it by promotional activities.
Report all HSE incidents and near misses immediately
Ensure that items of personal protective equipment issued to the employees are properly maintained.
Ensure that waste management procedures are followed.
Provide topics for tool box talks and monitor participation by all workers.
Give safety orientations to newly inducted workers and prepare safety records.

COMPANY: ANTAFRICAN NIGERIA LTD LAGOS. AUG. 2001 – SEPT 2002
POSITION: Workshop Supervisor
Job Responsibilities:
Repair of refrigeration and Air Conditioners.
Organize and oversee work progress.
Maintenance and repair of compressors, centrifugal and reciprocating pumps.
Installation of central air conditioners.
COMPANY: KEWALRAM NIGERIA LTD; WORKSHOP ISOLO, LAGOS AUG. 1998 – DEC. 1998
POSITION: Industrial Trainee.
Job Scope:
Repair of diesel and fuel generators and engines
Servicing of injectors and carburetors
Repair and maintenance of Industrial Plants (Generators)
Collating data and reporting to the workshop manager daily work progress.
NATIONAL YOUTH SERVICE CORPS (N.Y.S.C) ARAMAKO, EKITI STATE JULY 2000- JULY 2001
RESEARCH WORK:
Design and Construction of a motorized mini maize shelling machine (A project submitted to the Department of Mechanical Engineering, Ambrose Alli University Ekpoma, Edo State Nigeria.)

SKILLS & ABILITIES
Adapts easily to changes and able to work with minimal supervision.
A fast learner and able to work with people of diverse cultural background.
Good analytical, presentation and communication skills
Excellent team playing skills
Able to read and interpret P&ID and Isometric diagrams.
Conversant with ISO9000:2000, ISO9001:2000, ISO19011:2002
Deep working knowledge of EHS polices, responsibilities, risk assessment and job safety analysis
Verse in knowledge with general project rules and regulations.
Computer literate (Word, Excel, Power point, )
Certificate in HSE (Attended and completed HSE course level 3)
Valid driving license.
ON THE JOB TRAINING
HSE Induction Training (TSKJN)
HSE Induction Training (NLNG)
Waste Management training.
Permit To Work Training (PTW) Nigeria LNG
Commissioning Permit to Work Training TSKJN
Fire Awareness Training
AWARDS
Safety Crew of the Week CB&I/ TSKJN (NLNG) Nov. 2004
Safety Crew of the Week ETCO/TSKJN (NLNG) May 2006

REFEREES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 3118)

Go to Search Parameters...

Brief Description

2D and 3D cad applications - upstream and downstream experience

12 Years experience in civil engineering, design, procurement, construction & supervising of particular relevance to the project are as follows :

10 Year Experience, 5 years Implementing SAP FI/CO and BW / BI / Netweaver Solutions for Banking, Manufacturing, Sea port industry, Maintaining SAP BW Solution for Oil and Gas Industry

Quality control, Inspection, Installation/erection of pipes and piping components, HVAc, HSE, Computer literate

I am a geologist with multidisciplinary experience, including experience in geotechnical engineering, mining, exploration, tunneling, groundwater, drilling, environmental and construction monitoring. I am a licensed monitor well driller in Nevada and OSHA Hazwoper, MSHA, SWPPP and nuclear gauge cert

DCS and instruments el.engineer.International experience.Experience in Chemical,mainly in Pulp and Paper (equipment-similar to used in Oil&Gas,Cement,Fertilizers,etc)Industry

Mechanical Engineer with expereince in AutoCAD 2000, Piping, Welding, Installation and Erection Works, Production Plainning, Supervision

Graduate Mining Engineer with MBA & First Class Mine Manager's Certificate having 22+ yrs. Hard Rock Large Highly mechanised hands on experience in Mine Operation, Drilling & Blasting, Mine Planning, Contracts Management, Waste Dump & Haul Road, Mine Dewatering

Junior project manager

Land surveying relating to boundaries, design, construction, and mapping.

12 years experience in all aspects of telecommunications. Excellent written and communication skills. Highly organized. Ability to work on multiple assignments. Excellent problem solving skills. Able to meet deadlines and schedules. Start of to completion of projects to include ordering, insta

Motivated, proven performer with a 17 year record of demonstrated success in Operations Management, Project Management, Distribution/Logistics Management, and Mechanical Engineering across multiple fields from Military Operations, Municipal Management, Telecommunications, Software Development, Call

I am a BS Mechanical Engineer who had served primarily as a Senior Fire Protection-Applications and Design Engineer for around 17 years plus and 5 years as an Occupational, Health and Safety practitioner in a petrochemical industry with a primary function as Fire Safety Engineer. My specialty profe

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

A graduate in biomedical engineering with over 5 years of experience in Medical equipment planning, procurement, design assisstance, primary level maintenance in Health Care/Hospitals and developing Management Information System of Biomedical Department

Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

I have eight years experience in major civil works projects such as,bridges and metro rail projects.

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

Construction Project Controls Manager (PMP Pending)

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

E&I Superintendent with a broad spectrum experience of electrical, instrument, and mechanical engineering acquired throughout a thirty year career. 27 years of my experience represents working directly for the Client within the O&G industry, on multi-discipline task force projects, including PMT.

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

International Project, Construction, and Contract Management

Diploma in Quantity Surveyor

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

SDS2, Xsteel, AutoCAD Steel Detailer.

ITI in Draughtship

Create learning opportunity to work in architectural firm and deal with many graphic jobs.

Project Engineer (Instrumentation & Control)

System Administrator, Server Support, Network Administrator, Desktop Support, ADS, DHCP, CCNA, MCSE

Construction Electrical and Instrumentation Engineer

Qa/Qc Inspector

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

I am a highways designer, designed more than 50 link roads, 2000 kms length all over Egypt, Yemen repuplic, & KSA.Using thelatest versions of Autodesk, Also I have a good expeience in the field of design Water & Waste Water networks

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I describe myself as Sincere and perseverance to Hard work. I had completed my Bachelor of Civil Engineering in First Class From a reputed institution in Tamil Nadu, India.

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

Geotechnical Engineer

I have recently finished my undergraduate study in Mechanical Engineering, Institute Technology of Bandung, Indonesia. I am looking forward to having a career which has strong relation with my educational background.

Working in the Kingdom of Saudi Arabia for the last 9 1/2 years. Well experienced in the design and execution of all types of HVAC systems, plumbing systems including water supply, Sewage/drainage system and Fire fighting system.

Results-oriented, Construction site Engineer with 7 years of experience in all facets of the Industry. Verifiable track record for successful completion of many projects.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out