Resume - Looking for a mechanical engineering position.

Misco Jobs

Resume #7719

CONTACT INFORMATION:
View contact information...

Date of Birth 14.07.70

Sex Male

Marital Status Married

Nationality Indian

Passport details Passport No: T-632406
Place of Issue: Chennai
Date of Issue: 31.01.1995
Date of Expiry: 30.01.2005

Driving license details

Country License no Type of vehicle

India 5471/ney Light motor Vehicle &Motor cycle with gear
Saudi 179457 Light motor Vehicle

Educational Qualification:

Degree Discipline Period Place of study

Bachelor of Engineering.
Mechanical Engineering

1988- 1992
Regular
Madurai Kamaraj
University, Madurai.

Post Graduate Diploma
Materials Management

1992-1993
Correspondence
Annamalai University, Chidambaram.
Welding & NDT Qualification:

Subject Institution Period of study Certificate no.
AWS-CWI American Welding Society December 2003 01011011
RT-Level III American society for Non-Destructive testing November 2003 107863
(http://www.asnt.org/)

UT-Level III American society for Non-Destructive testing March 2004 107863
(http://www.asnt.org/)

MT-Level III American society for Non-Destructive testing March 2004 107863
(http://www.asnt.org/)

RTFI-Level II Industrial Quality Concepts, Chennai. December 2000 203007
PT- Level II Kalva Institute of NDT&Quality Management, Madras. June 1995 98/PT-II/151/M
Welding fundamental for Supervisors & Engineers Advanced Training Institute, central government of India, Madras. February 1995 027598
Process Instruments (Thermal Plants) Advanced Training Institute, central government of India, Madras. March 1995 027704

Experience details: Abstract

Company Year Job title
Babu Engineering Corporation, Neyveli, India. May 1992-June 1994 QA/QC Supervisor
Wens NDT Services, Chennai, India June 1994-June 1995 NDT Technician
NDT&CCS, Dammam, Saudi Arabia. June 1995-May 1998 Site In charge, Senior Radiographer, Film Interpreter, Acting Radiation Safety Officer.
Sonic Inspection Services, Chennai, India. June 1998-October 1998 T, K, Y-Operator.
Husseini Inspection Company, Dhahran, Saudi Arabia. November 1998-Still Senior NDT Technician, & NDT Specialist (NDT Inspector).
Experience Details: Briefly

1) Year: May 1992-June1994
Company: M/s. Babu Engineering Corporation, Neyveli, India.
Job title: QA/QC Supervisor.

a) Neyveli Lignite Corporation, Neyveli, India.
Job Description: Shutdown of Power Boilers.
My Job has to:
(i) Execute Leak test on the Boiler walls & Boiler tubes for the duration of
Shutdown.
(ii) QA/QC aspects involving scheduling of technicians for RT, UT, MT,
PT. Film Interpretation according to ASME Sec VIII- Boiler and Pressure
Code, and ANSI B 31.3.
(iii) Witness for Eddy current test at inside the boiler tubes, for corrosion and
Wall thickness lessening.
(iv) Build up the written procedure and manuscript of each and every effort.
(v) Coordinating with third party inspection.

b) Mettur thermal power plant, Mettur, India.
Job Description: Dismantling power Package Boiler from Mettur and
Erection & commissioning at North Madras Thermal
Power Project.
My Job has to:
(i) Full involvement with my group, take apart the Power Boiler from
Mettur to North Madras. And assembly at North Madras Thermal
Power plant.
(ii) Modification of pipe lines according to clients necessities, and
Recommend to taking weldments by RT& UT.
(iii) Film Interpretation according to ASME Sec VIII, and ANSI B 31.3

2) Year: June 1994- June 1995
Company: M/s. Wens NDT Services, Chennai, India.
Job Title: NDT Technician.

a) Tamilnadu Petro Products, Chennai, India.
Job Description: T&I activities.
My job has to:
(i) U.T. Inspection of weldments. (T.K.Y. sections)
(ii) Corrosion monitoring by UT/ RT.
(iii) Holiday Inspection& External coating thickness measurements of pipes.
(iv) Hardness testing of vessel weldments.

b) Madras Refinery Limited, Chennai, India.
Job Description: T&I activities and Shutdown.
My job has to:
(i) U.T. Inspection of weldments. (T.K.Y. sections)
(ii) Corrosion monitoring by UT/ RT.
(iii) Hardness testing of vessel weldments.
(iv) Film Interpretation with ANSI B 31.3 & ASME Sec VIII.
(v) Involving with Eddy current test groups for internal corrosion of
Heat Exchanger pipes.

c) Indian Oil Corporation, Chennai, India.
Job Description: T&I activities as on tank farm areas.
My Job has to:
(i) Perform NDT jobs at the tank farm area.
(ii) Alteration of pipe lines according to clients requirements, and
Suggest to taking weldments by means of RT& UT.
(iii) Corrosion monitoring by RT/ UT methods.
(iv) We have did according to clients requirements Post Weld Heat
Treatment.

3) Year: June 1995- May 1998
Company: M/S. NDT & Corrosion Control Services, Dammam,
Saudi.
Job title: Site In charge, Senior Radiographer, Film
Interpreter, Acting Radiation Safety Officer a) R&D Building, Saudi Aramco, Dhahran, Saudi Arabia. July 1995- August 1995.
(i) I have joined as a Radiographer (Temporary- Vacation relieve).
(ii) During this period, I have performed NDT activities at several areas, like Al-Hasa Bulk Plant, Dhahran Bulk Plant, Qatif Bulk Plant & King Fahd Airport terminal (Aramco area).

b) Rabigh Refinery, Saudi Aramco, Rabigh, Saudi Arabia. September 1995-October 1995.
(i) I have joined as a Radiographer (Temporary- Vacation relieve).
(ii) During this period, I have merged with Inspection department, and involved in T&I activities, and On Stream Inspection activities.
(iii) We are specialized in Compressor and Tank farm inspection activities. (UT & RT)

c) Jeddah Refinery, Saudi Aramco, Jeddah, Saudi Arabia. November 1995- March 1996
(i) I have joined as a Senior Radiographer and Film Interpretator. (Temporary- Vacation relieve)
(ii) Radiation source handling, Issuing and receiving from radiographers, and RTFI according with ASME Sec VIII, ANSI B 31.3, API 1104.
(iii) And, I have involved T&I activities & Shutdowns with Inspection teams at several units.
(iv) Corrosion areas monitored by RT/ UT methods. And <2" Diameter pipes or nipples are covered by RT methods for corrosion monitoring.

d) SAFCO, Dammam, Saudi Arabia. June 1996- July 1996.

(i) To perform RT/VT/MT activities on the Heavy vessel and tanks
For SAFCO.
(ii) Hardness testing and Coating thickness are performed inside the vessel.
(iii) Worked as a NDE Inspector, and merged with the inspection unit, and concerned in the T&I activities for their company.
(iv) Heat Exchanger tubes tested with Eddy Current tests with my groups.
(v) MT/PT inspection carried out on the Tank inside Circumferential and Longitudinal welds.
(vi) Witness for Holiday testing of external coating of the pipes.
(vii) And internal coating verified by Radiography.

e) Consulated Contractors Company, Rastanura refinery extension Project, August 1996- November 1996.
(i) During this period, we have done several NDT jobs like RT& MT & PT for Saudi Aramco.
(ii) And, oversee training programs for level II individuals.
(iii) Build up the written procedure and Document the RT& MT reports.
(iv) Coordinating with third party inspection, while auditing time.

f) M/s. SRB Limited, Shaybah GOSP construction, Shaybah, January 1997-March 1998
(i) Job description is to conduct RT, MT, PT at Wellheads, Trunk lines and flow lines for their contracts for Saudi Aramco.
(ii) More than 20, 000 joints, we have taken Radiography and more than 3000 joints we have conducted MT& PT.
(iii) I have worked as a Site Coordinator, Senior Radiographer and Film interpratator, and acting Radiation Safety Officer.
(iv) I am the one, trained and certified from my company, to shift the source from Radiation camera to Lead pot and lead pot to Radiation camera.
(v) Administer training programs for Level I and Level II individuals in the specific NDT methods for which he is certified.

g) Rabigh Refinery, Saudi Aramco, Rabigh, April 1998-
May 1998.
(i) I have joined as a Senior radiographer in Rabigh Refinery.
(ii) I have involved with Inspection groups, and performed NDT activities on T&I, PM shutdowns.
(iii) And On stream Inspection, FIR Programs also we have covered.
(iv) For personnel reason, I have resigned my job, and return back to India.

4) Year: June 1998 – October 1998
Company: M/s. Sonic Inspection Company, Chennai, India.
Job title: T, K, Y- operator.
(i) I have joined as a T, K, Y- operator, and performed T, K, Y, testing at NEPC-MICON Wind Power Mill, for their products.
(ii) Afford technical support to company personnel by recommending NDT methods for specific problem in their products at AUDCO Wind Power Mill.
(iii) Build up the written procedure and document of each and every work.

5) Year: November 1998- March 2000.
Company: M/s. Husseini Inspection Company, Dhahran, Saudi
Arabia.
Job title: Senior NDT Technician.

a) Udhailiyah Operation Inspection Department, Udhailiyah,
Saudi Aramco, November 1998- March 2000.
(i) I have joined as a Lead U.T. Technician, and I governed nearly 25 plants. (Gas Oil Separation Plants, and Water Injection Plants, & Khuff gas Manifolds)
(ii) I have merged with Inspection unit and I have involved several NDT/ QC activities.
(iii) We have performed several activities at T&I, and PM Shutdowns.
(iv) We are monitoring FIR, and on stream inspection procedures.
(v) During this period, most of the corrosion areas, I only found from the plant pipes from UT corrosion survey.

6) Year: April 2000-Still.
Company: M/s. Husseini Inspection Company, Dhahran, Saudi
Arabia.
Job title: NDT Specialist a) Southern Area Corrosion Control & Inspection Department,
South Ghawar Inspection Unit, Udhiliyah, Saudi Aramco,
April 2000- June 2003.
(i) I have joined as a NDT Specialist, and I have performed Inspection activities at Hawiyah and Haradh areas.
(ii) I have involved with the Inspection unit, and performed on stream inspection activities, FIR activities.
(iii) Develops the written procedures for both basic and advanced NDT methods of RT, MT, PT, UT, MFL, VT & ET.
(iv) Perform Interpretations of National Codes and Standards.
(v) Interpret results of specialized NDT examinations and develop reports detailing the findings of those examinations.
(vi) Setup and administer training programs for Level I and Level II Individuals in the specific NDT methods.
(vii) Make frequent On-site visits to Operations facilities to review Job Scopes and make recommendations to assure the optimum results are achieved from the NDT service provided.

c) Southern Area Producing Engineering Unit, South Ghawar
Inspection Unit, Udhailiyah, June 2003- Still.
(i) I have joined as a NDT Specialist (NDT Inspector), and I perform inspection activities with the Inspection Department at Khurais& Hawtha area.
(ii) I have to act as a mentor for Saudi NDT Technicians and develop their ability to become fully certified in Various NDT methods.
(iii) Make frequent On-site visits to Operations facilities to review Job Scopes and make recommendations to assure the optimum results are achieved from the NDT service provided.
(iv) Perform Interpretations of National and Standards. (Like- ASME Sec VIII, ASME Sec IX, ANSI B 31.3,31.6, AWS D1.1, API 1104, API 653)
(v) Provides technical assistance to operational personnel by recommending various NDT methods for specific problems.
(vi) Witness for the Eddy current test of Heat exchanger tubes for internal corrosion and wall reductions.
(vii) And witness for the Holiday inspections and external coating thickness.

(viii) Develop written procedures for both basic and Advanced NDT methods of RT, MT, PT, MFL, VT, and ET.

I am very sincere and hard working. I have believed that there are no shortcuts to success. Now, I am looking for a more challenging job. So, that I have applied for your company.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 2856)

Go to Search Parameters...

Brief Description

Diploma in Surveying; Profficient in SURPAC; AutoCad, Vcad

Masters in Mechanical Engineering - 2004, Bachelors in Mechanical Engieering – 2001, Computer awareness:Auto CAD, MS Office, MS Projects, Power Point Presentations; Trained & Certified for Health, Safety & Environment - IOSH

Looking for a mechanical engineering position.

Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer

for 25months at PetroRabigh Development Project PC1 & PC3 as a Snr.Planning Engineer with Gama Industry. Capable to detect every single activity's bottleneck that prevents to achieve the "MC, PC & RFISU".

Data manager with over 10 years of experience in the mineral exploration industry providing high quality digital tools, data and information to geoscientists. Extensive experience managing IT projects and services on an international environment. Strong analytical, organizational and technical skill

Fresh Mechatronics Engineering Graduate

Oracle dba, technical support

Java, JSP, Servlet, J2EE, JSTL, SQL, PHP, ASP, XML, HTML

I am presently working here in Saudi Aramco Oil Company as Supply Maintenance Planning Support Engineer. Since I started to work for my profession, I'm exposed more on Operation and Maintenance ( Reverse Osmosis , Desalination, Power Plant, Manufacturing & Petrochemical).

Can work with computers, good communication skills, team player, can work under pressure

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

Drafting, estimating, typing, computer literate: MSWORD, MSEXCEL, COREL DRAW, AUTOCAD, POWERPOINT, PIPES & PIPES++

Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)

Fitter Including Machining and Diesel Fitting

Precision Millwright, Welder. Turbines, Power Plants, Ethonal Plants, Steel Mill Plants.

Electronices Automation Control engineer designer

experienced electrician with vast instrumentation and supervisory experience.

CIVIL ENGINEER WITH 12 YEARS OF EXPERIENCE IN CONSTRUCTION FIELDS

• More than ten years experience in project/operation management and real estate development

Iam a Mechanical Design Engineer with experience in Heavy steel structures, Pressure Vessels ( Several Types), Power Generation, Material Handling. I have quite a number of projects to my name that have been completed succesfully

Big believer in teamwork, organization and co-operation, have the ability to perform well under pressure, hard worker, able to behave as a leader, manage stress.

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

I wish to introduce myself as an Automation Engineer with over 8 yrs of exp in automation field.

I am mechanical engineer 2002 ,I work as site engineer in the construction companies.

I am a highly experienced and enthusiastic Electrical, telecommunication, electronics and computer Engineer, especially in the mechanical and electrical field, currently working as a maintenance manager, looking for a challenging job where my experience, education, background, certifications and tea

Experienced in construction document controls, field office management, setup initial document controls for field office, project scheduling with Primavera P3 and MS Projects.

Quality Assurance in Oil and Gas industry

SAP XI and Oracle skills and certification

An enthusiastic and professional Engineering Manager; chartered mechanical Engineer, who enjoys being part of, as well as leading, a successful and productive team. Quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems. Able to work well on his own initi

I am a Broadcast Technician ZBC-TV in Zimbabwe. In March 2006 I completed a 4 year apprenticeship with ZBC-TV and have worked as permanent staff ever since. I am a Class One journeyman and hold a National Diploma in Electronic Communication Engineering.

I am trained in on-site and laboratory calibration of instruments and specializes in water quality testers and analyzers. I am also familiar with softwares used in engineering and design. I am knowledgable in PLC programming and capable of troubleshooting program errors.

Aim To Be Associated With a Progressive Organization That Gives Me Scope To Update My Knowledge And Skills In Accordance With The Latest Trends And Be Part Of The Team That Works Dynamically Towards The Growth Of The Organization And Gains Satisfaction Thereof

BS Degree in Control Engineering by computer, Electrical Department, Faculty of engineering, Sana’a University

Bright, personable chemical engineering student seeking full-time employment in Summer 2008.

I have work experience in United States, SE Asia, and China. I am a registered Professional Engineer (Civil) in State of California, USA. I am looking for a professional/managerial position in civil engineering/construction. Project experience and publications are available upon request.

I have been employed in Engineering, Procurement & Construction under Saudi Aramco Projects, I engaged in various fields of Engineering, Project Design, Maintenance, and Commissioning Operation. My knowledge consist of Field Inspection, Expediting, Pre-Commissioning, Material Coordination, Material

Over-all in charge for the submission of documents to the consultant and documentation control ( e.g. Transmittals, Inspection Request, Material Inspection request, Material Submittal, Document Submittal, Work Notification, Site Clarification, Method Statement, Correspondences, Minutes of Meeting,

Skills: Auto CAD versions 9 thru 2006i, Prime Medusa, UNIX, Micro Station, Microsoft Office, along with several other computer based applications.

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

The main areas of my expertise are Preparation of Engineering Estimates for civil engineering Projects, Survey and layout at site, Preparation and Evaluation of Tender Documents, Measurement and certification of Contractors work done, Contract Administration, Construction Supervision, Maintenance of

Over 15 years Professional experience in Document Control, Project Cost Reporting, Materials Control, Logistics, Administration, NDT Supervision, NDT reporting, QA/QC etc. with Oil & Gas and Marine (Onshore & Offshore).

25+ years Procurement, Material Control and Logistics Experience / Public and Private Corporations

To obtain a challenging position that will allow me to gain knowledge and experience in the area of Computer Aided Drafting (CAD), Microstation and PDS in Technical Department. To work and grow along with an employer to mutually obtain our objectives.

Logistic Job Skills: Stock Turn-in/Turn-out, Stores Indent/Requisition, Stores Data Entry, Physical Inventory Management, Stock Replenishment, Management Reports, etc.

I am a graduate in Chemical and Process Engineering.

Project Engineer, 5years experiance in Technip working on EPC jobs in LNG sector, excellent managerial , engineering skills.

Welding Engineer

Telecommunication Engineer seeking a Summer Internship with high skills in wireless and broadband sector. Proficient in C,C++ and JAVA programming.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out