Resume - Over 14 years of professional experience of Design, Draughting and Checking of...

Misco Jobs

Resume #7745

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Passed 2 yrs. Diploma in Draftsmanship (Mech.) in 1988-90 from Dahod-Gujarat-India
------------

OBJECTIVE:
------------
Ambitious, organized Piping Designer looking for a Change, where I can be a key team member, making an important contribution to the Piping Dept. and strategy of a growing & any prestigious well established Company.
------------

WORK EXPERIENCE:
------------
MAIN WORK EXPERIENCES & PROJECTS:

Company - Abu Dhabi Polymers Co. Ltd., (Borouge)
ADNOC GROUP OF COMPANY – Abu Dhabi - UAE Position: Mechanical & Piping Designer
Working as Direct Hired

Projects - Working for Plant Modification of Two Different Unit Ethylene plant & Poly-Ethylene Plant-I & II Including the Preparation of Mechanical drawings.
Responsibility - Preparation of As built for PDS 2D Schematic P & ID drawings, PDS 3D Model updating in Piping Designer for any Plant modification project, As built Isometrics extraction from Isogen, Making As built G.A. drawings with the help of PDS Drawing Manager. Checking of Piping Isometrics & Mechanical Drawings in Microstation for new lines of the Ethylene & Poly Ethylene Unit-I & II of the Plant & as well as handling whole plant modification jobs

Company - Fluor Daniel India Pvt. Ltd., Position: Designer-III (Piping)

Projects: Long Lake Upgrader Project, Fort Mcmurray, Alberta Opti Canada Inc. Canada

Responsibility - PREPARATION OF PDS 2D SCHEMATIC P & ID DRAWINGS.
Worked as a Designer (Piping) of work share project with FluorDaniel Canada. Responsible for to making PDS 2D Schematic P&ID's & Solving all warnings, Errors & run Propagation for their Long Lake Upgrader Project of FORT MCMURRAY, ALBERTA

Company - Fluor Daniel India Pvt. Ltd., Position: Designer-III (Piping)

Projects: Athabasca Oil Sands Downstream Project-Canada Shell Canada Ltd. - Canada
Responsibility - PREPARATION OF PDS 2D SCHEMATIC P & ID DRAWINGS.
Worked as a Designer (Piping) of work share project with FluorDaniel Canada. Responsible for to making PDS 2D Schematic P&ID's & Solving all warnings, Errors & run Propagation for their Athabasca Oil Sands Downstream Project-Canada

Company: Fluor Daniel India Pvt. Ltd., Position: Designer-III (Piping)

Projects - SCANfiner UNIT - Strathcona, ESSO (IMPERIAL OIL LIMITED) - Canada

Responsibility - DETAIL ENGINEERING AND PREPARATION OF 3D MODELS
Worked as a Designer (Piping) for work share project with FluorDaniel Canada.
Responsible for to Developed 3D Equipment modeling, Piping modeling, Pipe support, Iso. Extraction by using PDS (Intergraph) & Misrostation for Product Stripper design area, Main Reactor area & involvement in Diolefin saturator exchanger design area. Also involves in squad checking of vendor & inter discipline drawing & nozzle orientation etc.

Company - TECNIMONT ICB Ltd., Position: Designer (Piping)

Projects: Urea deb. & granulation Plant-II, PETROCHEMICAL Ind. Co., (PIC) Kuwait

Responsibility - Responsible for the Detail Engineering and 3D - Modeling of GRANULATION - II project at our TICB - Mumbai office, In this project. I was responsible for Detail Engineering and making study drawing with the help of Microstation-SE. I was involved in 3D modeling of NH3 unit with the help of PDS (Plant Design System Software), which includes Equipment Modeling, Piping Modeling, Isometric extraction and drawing manager activities.

Projects: Urea deb. & Granulation Plant-I, PETROCHEMICAL ind. co,(PIC), Kuwait

Responsibility Responsible for the Detail Engineering and 3D - Modeling of Urea Plant project. And making 2D drawing with the help of Microstation, involved in 3D modeling with help of PDS (Plant Design Software) which includes Equipment Modeling, Piping Designer, Isometric extraction and drawing manager activities.
I Was deputed 6 months at PIC- KUWAIT SITE.
Responsible for Existing Piping relieving activities, Checking of support, Preparation & checking of reused lines, Isometric, Checking & updating of P&I diagram as per reused pipe lines, Preparation of Pipe track layout drawings with the help of Microstation-SE.

Projects: FINA CHEMICALS, FELUY. – BELGIUM (Polypropylene Plant.)

Responsibility Responsible for preparation of PDS 2D P&ID'S.
I Was involved for to making PDS 2D Schematic P&ID's & Solving all warnings, Errors & run Propagation for their making P&ID'S in PDS 2D of Polypropylene Plant.

Projects: ANTIBIOTICOS – SETTIMO TORINESE – ITALY (Pharmaceutical Plant.)

Responsibility - I Was deputed 3 months at " Antibioticos – Settimo Torinese – ITALY "
Responsible for Detail Engineering Activities & preparation of Making 2D drawings G.A., Isometrics, Nozzle orientation & Special Support sketches with help of AutoCAD.

Projects: LLDPE PLANT, HALDIA – INDIA

Responsibility - Responsible for detail engineering activity & site supervision & Deputed to TICB-Mumbai for Preparation of isometrics on PIPECAD & Checking of Isometrics & Deputed to DHDS–Haldia Site for Site supervision.

Projects: 800 MW Co-Gen. Power Plant, SEMBCORP COGEN, Singapore by GE-Alstom

Responsibility - Responsible for preparation of 3d models & involved in PDS 3D - Modeling of 800 MW Co-Gen. Power Plant project. for Equipment Modeling, Piping Modeling, Isometric extraction and drawing manager activities.

Projects: POLYPROPYLENE PLANT, IPIRANGA PETROQUIMICA, TRIUNFO BRAZIL

Responsibility - I Was involved in PROJECT OF PP PLANT, IPIRANGA (BRAZIL) as Designer for
Detail Engineering of a Polymerization Area. This task included Preparation of
Distribution P & Ids for Process and Utilities service Fluids for Pipe Rack
Modification in Equipment Layout & Demarcation of Areas. Preparation of Piping Layout Drawing, Nozzle Orientation, Bill of Material, Secondary structural drg., Checking of Isometrics Drawings, Civil Structure Drawing with Equipment Layout, Equipment Data sheet and Equipment's Vendor Drawing.

Company: TECNIMONT ICB Ltd., Position: Draughtsman (Piping)

Projects - PTA – REVAMP – OTTANA – ITALY (CHEMICAL PLANT)

Responsibility Responsible for detail engineering and preparation of 3D MODELS, Equipment layout, Piping Layout drawings, Developed 3D MODEL on OMNI PIPE, Automatic Extraction of Isometrics & B.O.Q from 3D–MODEL, Support Marking & Preparation of special Support sketches, Isometrics & B.O.Q. for TIE-IN points.

Projects: Indian Petrochemical Corporation Limited, 75000 TPA Polypropylene Plant – Vadodara.

Responsibility Revised Equipment layout, piping Layout drawings, Preparation of Isometrics & BOQ., Support Marking & preparation of special support sketches.

Projects: MADRAS FERTILIZERS LIMITED. – MADRAS – (INDIA)

Responsibility - Revised piping Layout drawings, Isometrics & BOQ, Special support sketches.

Company: Raunaq International. Ltd. - Nehru Place – New Delhi
Position: Draughts man

Projects: MARUTI UDYOG LTD. (EXPANSION PROJECT) – GURGAON (INDIA)

Responsibility Revised Equipment layout, Revised piping Layout drawings, Preparation of Isometrics & BOQ., Preparation of As built drawings, Site Supervision at site.

Company: Singh Springs Pvt. Ltd. - Palej (Guj)
Position: TECHNICAL SUPERVISOR
Responsibility Preparation of Mechanical drawings & Technical Supervision.

FOREIGN ASSIGNMENT:
I Was deputed 3 months at Antibioticos – Settimo Torinese – ITALY
I was involved in Detail Engineering Activities like making 2D drawings, Isometrics, Nozzle orientation & Special Support sketches with help of AutoCAD Ver-14. I was deputed at TECNIMONT S.p.A., MILAN, ITALY for detail engineering, material take off and 3d modeling for Urea Revamp. & Gran. plant of PIC- Kuwait Project.

I Was deputed 5 months at PIC- KUWAIT SITE.
I was responsible for Existing Piping relieving activities, Checking of support, Preparation & checking of reused lines, Isometric, Checking & updating of P&I diagram as per reused pipe lines, Preparation of Pipe track layout drawings with the help of Microstation ver-SE.
------------

EDUCATION & CERTIFICATION:
------------
Passed New SSC Exam. with Science in 1985. from G.S.E.B- Gandhinager Board, Gujarat & Passed 2 yrs. Diploma in Draftsmanship (Mech.) in 1988-90 from Dahod-Gujarat-India
------------

ADDITIONAL INFORMATION:
------------
SOFTWARE EXPERIENCE
Microstation's all version up to SE & J or 7.01, AutoCAD, R-14, R-2000, R-200i & R-2002, Intergraph's Plant Design system (PDS), PDS 2D SCHEMATICS ( P&ID ), PDS 3D MODELING, EQUIPMENT MODELING, PIPING DESIGNER, DRAWING MANAGER, ISOGEN, SMART PLANT REVIEW (SPR), Rebis's Omni 3D Modeling series (With Bentley System's Inc.) – U.S.A OMNI PIPING MODELLING, OMNI EQUIPMENT MODELING, OMNI ISOMETRIC, OMNI AUTO ISO. FOR AUTOMATIC EXTRATION OF ISOMETRICS. Rtd's Pipecad 5.2 for Isometric GRAPHIC APPLICATION OF PIPECAD, Rebis's Auto plant 3D Modeling series (With Rebis's California - USA) AUTO PLANT PIPING MODELLING, AUTO PLANT EQUIPMENT MODELING, AUTO PLANT ISOMETRIC, AUTO PLANT AUTO ISO. FOR AUTOMATIC EXTRATION OF ISOMETRICS, AUTO PLANT SPECGEN.

Worked on the following modules of PDS-3D system Ver.-07.00.00.15
PDS Equipment Modeling, PDS Piping Designer, PDS Isogen, PDS Drawing Manager and PDS Design Review.
(Expert in PDS)
I can operate AutoCAD version from release 14 to Release 2002 & All the version of Microstation from Ver.- 4.0, 5.0, 95, SE & J or 7.01.

KNOWLEDGE OF OPERATING SYSTEM - DOS, WINDOWS NT, WINDOWS 2000

KNOWLEDGE OF OFFICE AUTOMATION PACKAGES - Office-97 (Word, Excel, Power Point), Lotus Notes, PMCD & other windows based software.
Familiar with Document Control software Documentum for Electronic Data Management System (EDMS).
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 2820)

Go to Search Parameters...

Brief Description

I am graduate and have a diploma of instrumention and process control with 9 years exp in diffrent industries

Facility Manager

Instrumentation, Automation, control & electrical engineer with 3 years experience

My skills and qualification are exemplary

1991-2002 : Diploma in Building Services Engineering Place : Shah Alam Polytechnic CGPA : 2.85 out of 4.00 1997-1998 : SPM Place : Sekolah Menengah Teknik, Kuala Terengganu Grade : Grade 2, 31 Aggregate

PLC/FPGA Process Controls Electrical Engineer Allen bradley and Siemens architecture proficent with Control Logix Design Experience.

Peter is a highly experienced environmental engineer with significant expertise in oil, gas and mining, regulatory issues, sustainable development, corporate social responsibility and policy development. He is a Chartered Engineer (CEng, MICE), and an Environmental Professional (CEnv, MIEMA)

3 decades of environmental, health and safety experience in the private and government sectors

15+ years experience HSE oilfield operations. Experience includes, drilling, completions, construction Experience in North Africa, all areas of Canada including Artic. Client rep for large oil/gas producers.

BE in Electrical and Electronic Engineer. Training in PSS/E Software. Able to perform Load flow analysis using PSS/E software and intepreat result.

Total 11 years of experience for Instrumentation and control related design and detail engineering activities for Petrochemical refineries, Ammonia Fertilizers, Cross country Pipelines, Offshore and onshore gas processing facilities and power projects.

Set-up, operate & maintain Document Control Area required for distribution, storage, retrieval & management of Vendor documents & dwgs, Proj. documents/drwgs; Electronic Document Management Systems Design, Operation & Maintenance; Supervision of Doc. Control Group & Precedures devt./implementation.

Graduate + Diploma in Materials Management, 12 Years exp., working as Purchaser in a Global Leading EPC Company in Qatar

After completing my Degree in Mechanical Engineering, I have worked in Diagnostician company providing NDT services on pipelines across Russia. Later I joined GAZPROM’s Subsidiary “Stroytransgaz” in Syria where 36”x319km Gas Pipeline Construction Project gave me a solid background in many QC aspects

Have around 17 years in the area of Industrial & Process Automation including Safety Systems, which involves Study of process, application development, testing and implementing Control systems Software and Hardware

GIS Expert (Esri & Geomedia)

Mechanical Eng. knowledge and experience in auto industry, applicable to other areas of Engineering. Computer software & hardware knowledge including Simulations, FE analysis in PC, Unix workstation. Expert in developing new processes with implementation and training

Control & Instrumentation Engineer with 5 years experience in erection, commissioning and maintenance of control systems and field instruments.

Logistics Manager, Rig Manager, Materials Manager

Bachelors - B.A., Applied Mechanical Engineering

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

willing to work in a challenging Electrical carrier

DOCUMENT CONTROL MANAGEMENT, PROJECT SUPPORT, TECHNICAL & DESIGN COORDINATION, EDMS..ETC

Working on projects for various E&P Companies and Contractors

CAD drafter

I am a technical leader with experience of start up of automated plants. I have managed 27 maintenance persons in hiring and teaching the neede skills of that facility. I am licensed electrical contractor with two degrees,A.A. computer electronics engineering technology and A.A. mechanical engineer

CIVIL ENGINEERING; LAND SURVEYING; COMPUTER AIDED DRAFTING (CAD)

ms project,autoCad 2008(2d,Isometric,3d modeling),B.Eng in Metallurgical and Materials Engineering,Planning,cost estimating and control,job schedulling,WBS,manpower and site mobilization,EVA,S-curves,Risk management,Project Evaluation

Chemical Engineer working on Process & Projects Engineering with 5 years of experience

Provide Project Control Scheduling Support

Project Recruitment Specialist

Over 14 years of professional experience of Design, Draughting and Checking of Plant layout and Piping System.Conceptual & detail engineering like Preparation of Plot Plan, Equipment Layout, Piping Layout, Piping Isometrics, Nozzle Orientation & Bill Of Materials preparation.

Geologist, EIT, 11+ years drilling and logging samples for geotechnical engineering projects federal and local roads, highways and structures. Supervised up to 4 field and lab techs for 3 different NDOT roadway and bridge projects. Drilled shaft inspection exp.

Qualified fitter and turner,ncr computer and equipment technician, diamond mining expierience, electro mechanical experience. steam turbines and related equipment experience

Electrical instrument enginer, Prject engineer, maintenance, Loop checking, testing, operation, elctromechanical, F&G, ELV, MV ...etc

As an Electrical Engineer with some Experiences and Qualifications, include Instrumentation, PLCs, Control and Automation, High Technology Machineries and Equipmens Applications Skill, Engineering & Project Management, Computer Applications, Communications, and Leadership Skill.

Solid Waste Management, Health, Safety and Environmental Management, Fumigation, Site Inspection, First Aid Service etc.

SALES , MARKETING AND PROPOSALS ENGINEER.

Project & Contract Management, Project Control, Planning, Estimation & Proposals

I am a civil engineering technologist with 29 yearsof national\international experience seeking opportunties in construction management, supervision, QA\QC. Work experience includes heavy civil works for mining\process facilities, petrochemical, industrial, commercial\institutional, and municipal

A highly motivated intelligent manager, who is very hard worker both individually and in a team, copes well under pressure, well presented, enthusiastic. Excellent communications skills, creative, and problem solving skills, and an effective organizer. Adaptable to new situation, determined

Over 25 years of design and engineering experience; providing design, engineering and management services for a variety of projects and fields. Expertise includes estimating, conceptual and finalized layouts, piping design, instrumentation, process, P&ID development, sizing/specifying/requisitioning

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

Qualifications: S.S.C., Intermediate, NCTVT - Vocational Diploma In Motor Mech, A.M.I.A.E. (India, Auto Engg).

Civil Engineer - Contracts, Cost Estimation, Tendering, Cost Control, Claims & Arbitration

i have under gone series of hands on equipment training at port harcourt refining company,nigeria.

EIT with educational background in chemical and environmental engineering, Knowledge in waster water and environmental regulations.

Inspeection and repairs Daf Trucks, Matlab, Simulink, Excel, MS Word

Operation Manager, Project Manager, Senior Engineer, Offshore / Marine / Subsea, Geotechnical , Civil, & Geological, Client Rep, Oil & Gas, Construction

Instrumentation Calibration

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out