Resume - For the past 11 (Eleven) years of my working experience as Equipment Site Superv...

Misco Jobs

Resume #77496

CONTACT INFORMATION:
View contact information...

My areas of expertise are Preservation, Installation, Inspection& Verification of Rotary Equipment, Static Equipment, Equipment Internals, Air fin coolers, Surface condensers etc.

Inspection for Preservation of Equipment include N2 pressure, Sacrificial Anode installation, Desiccants / VPCI Powder, Telltale hole grease lubrication, Paint Damage, Closed condition of Flanges/openings, Grease lubrication of machined parts, Bearing housing oil level, Periodic shaft turn, Storing of Plunger & valve components, Space heater energize of motor, Storing of spare rotor & parts, etc.

Installation & Inspection for Rotary Equipment include Padding, Elevation, Position, Orientation, Levelness, Pre.shaft alignment, Run-out, Void, Pipe Strain, Motor / Turbine solo run, Final shaft alignment, Prep. of Graph, Impeller & casing wear ring machining / clearance inspection at work shop, Lube oil Flushing Inspection, Mechanical Running test, Completion of inspection records etc.

Installation & Inspection for Static Equipment include Padding, Elevation, Position, Orientation, Verticality, Levelness, Platform & ladder, Vessel Internal work, Pressure Testing, Loading of catalyst, chemicals, Support balls, Vessel Box-up, etc.

Installation & Inspection of Air Fin Cooler & Air cooled surface condenser include Alignment of setting plate, structure, tube bundle, louver, shaft, pulley, Blade Angle, Tip clearance, Belt tension, pressure testing / Dew point inspection for tube bundles, solo run of motor, Completion of inspection records etc.

Experienced in issuing of NCR/DR against non-conforming products/methods during construction activities.

Experienced in preparation/verification of ITP, QCP & Method statements for the Installation & Inspection of Equipment.

Familiar with code & standards Borouge API, Aramco. QP, Shell DEP, PIP VEFV, Tema etc.

Rotary Equipment Experience with: -
Turbine / Compressor ¡V GE Thermodyne, Siemens, Manessman-Demag-Delaval, Dresser Rand, Ingersoll Rand, Mitsui, Kobelco, Man Turbo, Mitsubishi, Nuovo Pignone, Thomassen, BC Howden, Elliott Ebara, GE Rotoflow, Technofrigo etc.
Pumps ¡V Flowserve, Gabbioneta, Sulzer, Ebara, Nikkiso, Sundyne, Sundstrand, Teikoku, Goulds, Viking, Nippon, Cryostar, Gorman-Rupp, MTH, Thompson, HMD Kontro etc.

Work Experience September 2008 ¡V Till Date
ABS Group Inc. (EU 2 Project, Borouge 2, Ruwais, Abu Dhabi).

Technical Representative (IPMT Inspector) ¡V Static & Rotary Equipment
EU 2 Project for Borouge is a Joint Venture of Adnoc & Borealis.

Duties & Responsibilities
1 Reporting to QA/QC Regional Verification Manager.
2 Review & verification of ITP, Method statements etc.
3 Field inspection of the installation & alignment of Static & Rotary Equipment with respect to the related standard, specifications, ITP & vendor manuals.
4 Accepting/Rejecting the inspection result based on standard criteria
5 Attending IPMT weekly meeting on construction & QC overview.
6 Preparation of NCR & following up if necessary.
7 Conduct Frequent Audit on material storage, Preservation, Construction, Inspection etc.
8 Review & verification of all records during final closure & hand over.

September 2006 ¡V August 2008.
JGC Arabia Ltd., Rabigh Olefin Plants Project, Kingdom of Saudi Arabia.

Senior QC Inspector ¡V Static & Rotary Equipment
Rabigh Olefin Plants Project for Petro Rabigh is a Joint Venture of Saudi Aramco & Sumitomo-Japan, which consist of HOFCC & EC.

Duties & Responsibilities
1 Reporting to Field QA/QC Deputy Manager.
2 Verify documents attached to RFI, if it's comply with the drawing & document revision
„X Field inspection of the installation & alignment of Static & Rotary Equipment with respect to the related standard, specifications, ITP & vendor manuals.
3 Accepting/Rejecting the inspection result based on standard criteria
4 Attending QC meetings with all updated status.
5 Preparation of NCR & following up.
6 Review & verification of all records during final closure & hand over.

March 2005 ¡V July 2006
Consortium-Astaldi Arabia Ltd & NSH Co. Ltd. C/O Technip Italy S.p.A.
ORYX GTL Project ¡V Raslaffan. Qatar.

Lead Supervisor ¡V Static & Rotary Equipment
ORYX GTL (Gas to Liquid) project is a Joint Venture of SASOL & QP, which consist of Liquid Oxygen, Hydrogen Production, Hydro Cracking, Syngas Production and Utilities.
Duties & Responsibilities
1 Organize & direct the site Installation & alignment activities.
2 Verify the latest revision of Drawings & Documents.
3 Preparation of Method statements for Equipment installation.
4 Field installation & alignment of Static & Rotary Equipment with respect to the related standard, specifications, ITP & vendor manuals.
5 Conducting daily Safety toolbox talks.
6 Updating the Installation status for Progress meetings.
7 Coordinate with QC & Field Engineering Section.

June 2003 ¡V January 2005
Seeyen Engineering Co. Pvt. Ltd. Digboi Refinery ¡V Phase II, Assam

QC Supervisor ¡V Static & Rotary Equipment
Duties & Responsibilities
1 Reporting to QA/QC Manager
2 Preparation of QCP, ITP etc. for Installation & Inspection of Static & Rotary Equipment.
3 Supervising the Inspector's activities & verification of records.
4 Attending QC weekly meetings.
5 Solving the site installation problems based on related standards/other relevant documents.
6 Verification of Method Statements submits by construction.
7 Bore scope Inspection for Centrifugal compressor internals & any necessary rectification.

June 2002 ¡V May 2003
Seeyen Engineering Co. Pvt. Ltd. Tinsukia Fertilizers, Assam

QC Supervisor ¡V Static & Rotary Equipment
Duties & Responsibilities
1 Reporting to QC Manager
2 Preparation of QCP, ITP etc. for Installation & Inspection of Static & Rotary Equipment.
3 Supervising the Inspector's activities & verification of records.
4 Attending QC weekly meetings.
5 Solving the site installation problems based on related standards/other relevant documents.
6 Verification of Method Statements submits by construction.

November 2000 ¡V March 2002
NSH Co. Ltd., C/O Joint Venture - Snamprogetti S.p.A. & Hyundai Engg.Co.Ltd.
NGL-4 Plant ¡V Umm said-Mesaieed ¡V Qatar, QATAR PETROLEUM.

QC Inspector ¡V Static & Rotary Equipment
Duties & Responsibilities
1 Reporting to Lead QC Engineer.
2 Verify attachments of RFI, it's comply with drawings & document revision
3 Field inspection for installation & alignment of Static & Rotary Equipment as per the related standard/documents.
4 Coordinate with client for final inspection.
5 Preparation of all inspection records.
6 Review & verification of all records during the final closure & hand over.

March 1999 ¡V October 2000
Seeyen Engineering Co. Pvt. Ltd. Guwahati Refinery - II, Assam
Supervisor ¡V Static & Rotary Equipment
Duties & Responsibilities
1 Organize & direct the site Installation & alignment activities.
2 Verify the latest revision of Drawings & Documents.
3 Field installation & alignment of Static & Rotary Equipment with respect to the related standard, specifications, ITP & vendor manuals.
4 Conducting daily Safety toolbox talks.
5 Coordinate with Field Engineering to solve any non-conformance.
6 Classroom training & Coordinating on job practical training on precision alignment to an assigned group of technicians.

February 1998 ¡V January 1999
Star Constructions ¡V Mumbai. Jindal Strips Ltd., Mumbai.
Millwright supervisor - Equipment
Duties & Responsibilities
1 nstallation & alignment of Equipment for Skin pass mill, zendzimer mill & auxiliary equipments, Annealing & Pickling Line, Coil Build up line, Coil Galvanizing line etc.
2 Preparation of Relevant documents for Inspection.
3 Coordinating with QC & Field Engineering section.
Training / Seminars
Attended * 1999 - Training in API Recommended practice 686 ¡V 1ST Edition 1996 for Machinery Installation & Installation Design by Hyprecision Hydraulik Pvt. Ltd. (Proj.Div.) Mumbai, India.

* 2000 ¡V Training in Installation, Alignment & Inspection of Horizontal & Vertical pumps, Reciprocating & Centrifugal Compressors by Bharath Pumps & Compressors Ltd., Kanpur, India.

* 2006 ¡V Seminar & Training attended for Incident Investigation & Reporting by JGC ME FZE

* 2007 ¡V Seminar & Training attended for PMI-Arcmet 8000 by SANCO, UAE.

Personal Data Nationality: Indian Province: Kerala
Date of Birth: March 29, 1975 Civil Status: Married
Passport No: F 7768382 Date of Expiry: 30-July-2016

Education 1994-1997 State Board of Technical Education, Kerala, India.
Diploma in Mechanical Engineering (3 years).

1990-1992 M.G. University, Kerala, India. Pre-Graduation course (2 years)

Computer Skill Operating Systems- Windows 2000, XP, and Vista including EDIS, LOTUS NOTES, Documentum 5 and MS Office.

Languages Known English, Hindi, Malayalam, Tamil.

Driving License
LMV ¡V Indian International
NOC for Saudi Available.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 3092)

Go to Search Parameters...

Brief Description

Construction Project Manager, Property Development Manager

Olympic Ice Skating Rink, Muliti-storey, Apartments, Precast Panels, Site Retention, Post Tensioned slabs, Structural Steel,

Self-motivated Draftsman proficient in AutoCAD and manual drafting with 750 hours of theory and 750 hours of hands on experience. Eager to contribute time and effort to benefit a respectable company. Responsible, hardworking and dependable.

To obtain a challenging position that utilizes proven experience and skills.

Excellent interpersonal, oral and written communication skills, Good computer skills (MS-Word, MS-Excel, MS-Power Point, MS-Access, Oracle etc.). Excellent knowledge and Training on ISO 9001, ISO 14001, OSHA and OHSAS 18001. Master degree, Diploma in Safety, Training on HSE.

A dedicated team player with excellent problem-solving skills. Valuable mechanical engineering experience in a variety of work environments: fabrication, project management, design in high tech, aerospace, automobile and offshore industries, cost control, QA/QC. AutoCAD, SACS, Inventor, Solid Edge

Primavera Experience

11 years of experience in the Oil & Gas, Carried out various endeavours including feasibility study, basic engineering, detailed engineering, construction engineering and the supervision of yard construction and offshore installation.

Have certificate in Mechanical Engineering drafting with 12years experience in handling Autocad programme. currently based in Riyadh, KSA and handling drawing for Architectural, C&S & MEP.

I have completed B.E,(Electrical & Electronics Engg) in may 2006 with 70% as the aggregate from Anna University(Kamban engg College) India.Having 2 years experience in transformer manufacture, Being given to understand that you are entertaining candidates for various positions

B.E. / 24Yrs / REC, Motilal Nehru, Allahabad. Work Experience: Projects/ Construction/ Consultancy/ Planning – 10yrs. Maintenance/ Planning/ ISO 9000 Implementation – 12yrs. Trainer / Q A & Q C /Turnover Documentation – 2yrs.

B.E. (Mechanical) with Piping Engineering from Indian Institute Of Technology, Mumbai.

Good in AutoCad, 6 years experince in 4 shipyards with main activity shipbuilding and repairing, youg, able to lear and fast adapting in diferent conditions.

Telecommunications Engineer, with Bsc. In Telecommunications and Electronics, present occupation on Telecommunications Network Resource Management, Planning & Design Telecommunication Circuits Serving Electrical Networks. Consultant Engineer: Alarabi Engineering Consultants.

Senior Electrical Engineer with over 20 years of manufacturing, industrial, chemical, and power plant field experience.

Industrial automation with specilisation in RTU, PLC, Testing and commissioning of MCC, PCPwith sound knowledge on embeddedsystem, RTOS-VX WORKS

Educated to a high level with well developed interpersonal skills. A proactive, result orientated style of working, is supported by a broad range of practical skills and knowledge. A keen sense of self worth and ambition are tempered by a proven ability to achieve within a professional environment.

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

E&I QC Inspector

MEP Consultant, Space Planning for all Mechanical Services,Specialised in HVAC & Fir Fighting Services,Skilled with Cooling Load Calculating Softwares.Lead or o-ordinate the Team is easiser.

Building Seismic Design , Evaluation of Structures, Bridge Design

Integrated Buidling Systems Manager, Project Manager, IT Manager, CMMS

Rotating Equipment Engineer with 9 yr Experience

I am an engineer holding a university degree (B.Sc) in electrical engineering Aden - Yemen, I have 8 years experience, 5 years in electrical & electronics maintenance and 4 years experience in a Company in Saudi Arabia has Industrial agencies responsible of after sales services

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

13 Years with Onshore & Off shore, OIL & GAS refinery & Shutdown .

Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.

I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro

Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.

For the past 11 (Eleven) years of my working experience as Equipment Site Supervisor/ QC Inspector/QC Supervisor, I had gained experience & Knowledge on Quality Awareness. Performing Hold, Witness & Surveillance inspections based on standard requirements and other related presentations

Project Management. Scheduling, Ms.Project, Primavera, Budgetting. Engineering. QS, AUTOCAD, Structure Analysis, SAP2000, Site Engineer.

Highly skilled engineering and construction management professional.

Qualifications: B.E (Mechanical). Graduated with second class, first division honors. Have an MEP consulting background with over 2 years experience. Advanced in: AutoCAD, Solid Works, Excel, Visual Basic programming, Word, TRACE heatload and Matlab programming.

Electrical engineering major in power .

As Geosciences Engineer, 13 years of experience. Exploration and Production mines

Electronics and communication Engineer

GSM/CDMA Project Manager

Installation and commissioning, project management

Experienced & Seasoned Engineer

Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.

Total 13 years experience in Contract Administration, Quantity Survey, and Procurement functions of offshore oil and gas projects, onshore petrochemical and fertilizer projects representing both Consultant and Contractor.

More than 10 years of rich, in-depth, varied experiences in the field of Project Quality Assurance / Quality Control, Project coordination, execution, Testing and Pre-commissioning of diverse E & I and CP system activities in Refineries, Oil & Gas Plant (Onshore & Offshore), Fertilizers Plant, etc.

I am a target oriented person with vast experience in Oil and Gas Construction Projects, I have experience in the safe Erection, Dismantling and Modifications of all Scaffolds in accordance with BS 5973 Standards, Inspection of scaffold materials and fall protection systems, documentation of scaffol

Contracts Manager

Civil Engineer with Project Control experience and knowledge of Primavera (P3)

A chemist with technical skills trainings in Industrial Process Controls, Advanced PLC, Hydaulic Industrial Controls, PLC, Electro-Pneumatics, Calibration for Process Instrumentation, Advanced Industrial Motor Controls, Pneumatic Industrial Controls & Industrial Electrician

Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic

Project maintenance manager/planner/trainer

9 years of extensive experience in Project Management, Planning and Execution involving fabrication, erection & commissioning of Piping & Equipments in Nuclear Facilities, Petrochemicals, Aluminum Smelter and Gold Mine Projects.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out