Resume - Urban Planner with GIS and AutoCAD skills

Misco Jobs

Resume #77745

CONTACT INFORMATION:
View contact information...

EDUCATION
08/2004- 05/2006 UNIVERSITY OF TEXAS AT AUSTIN,
Community and Regional Planning Master's degree, Austin, TX, U S A GPA 3.69
09/2001-07/2002 SOKA UNIVERSITY, Tokyo, JAPAN, Cultural Short-term Exchange Program. Scholarship Awarded by the Association of International Education, Japan (AIEJ)
08/1994-06/2001 UNIVERSITY OF GUANAJUATO, Guanajuato, MEXICO, Bachelor in Architecture obtained in 2002. GPA 9.87 out of 10.00

PROFESSIONAL EXPERIENCE
06/2006-12/2008 Division for the Administration of Urban Development
Assistant Planner Guanajuato, Mexico
- Assisted the Executive Director in several projects at different phases
- Presented research findings and policy recommendations to policy makers, interested groups and the media
- Analysed and monitor relevant federal and state legislation.
- Reviewed project plans and checked for inconsistencies with state regulations.
- Evaluated progress and reported results to the Executive Director.
- Updated and corrected, with ArcGIS software, several sets of plans, redrawing several plans with the help of field work.
- Performed other related activities as directed by the Executive Director

12/2005-03/2006 NuStats Partners www.nustats.com
Intern Austin, Texas
- Worked on the Chihuahua Household Travel Survey in all phases
- Worked in the design and translation of survey materials
- Monitored the progress of data collection (including calculating response rates, measuring productivity of interviewers, and determining scheduling adherence)
- Reviewed the completed survey data for completeness and the location geocodes for accuracy
- Analyzed the reported travel behavior details and drafted the final report
- Determined corrective actions to keep the project on track and on budget

05/2005-12/2005 POPULATION RESEARCH CENTER, UT AUSTIN
Graduate Research Assistant Austin, Texas
-Entered data and controlled quality of thousands of records in spreadsheets.
-Used ArcGIS 9.1 software for: Georeferencing Maps, digitizing diocese boundaries, mission stations, editing attribute tables, and data manipulation.
-Scanned and adapted research material using Photoshop for making usable for capturing information.

08/2004-05/2005 RANDALL OWEN ARCHITECTURE, AIA. www.ro-a.biz
Intern Austin, Texas
-Collaborated in CAD Drafting, Site Visits, and Meetings with clients.

03/2003-12/2003 COSANTI FOUNDATION. ARCOSANTI PROJECT. PLANNING DEPARTMENT
Intern www.arcosanti.org Mayer, Arizona
- Volunteered in the construction of the East Crescent project.
- Did Field Inspection and dimensioning.

07/2002-
02/2003 GUANAJUATO STATE MINISTRY OF PUBLIC WORKS
Supervisor Architect Guanajuato, Mexico
-Assisted in the completion of different Urban Facilities and Architecture projects.
-Estimated materials and inspected finished works in the new Campus of the Universidad de Guanajuato UCEA.
-Performed regular visits to the construction sites in different buildings.

02/2001-08/2001 DEPARTMENT OF ENVIRONMENTAL SCIENCES, UNIVERSITY OF GUANAJUATO, Main Research Assistant, Guanajuato, México
-Assisted Chief Researcher Manuel Sanchez Martinez in the research project called "Environmental Preservation in Guanajuato". Focus on Urban issues.
-Gathered information about the city and urban infrastructure.

QUALIFICATIONS

* Fluency in English (TOEFL CBT 283)
* Good knowledge in MS Excel, Word, Power Point, ArcGIS 9.2. Basic Knowledge of AutoCAD 2002, 2004, Photoshop.

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 3118)

Go to Search Parameters...

Brief Description

B.Sc. in Civil Engineering (CE), Bangladesh University of Engineering & Technology (BUET), Merit scholarship recipient in every under graduate level (Second grade)

IM Supervisor, DM Manager, Expediter, Technical Writing skills in authoring procedures, Business Development with Green conceptual ideas

I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.

I have wide experience (more than 22 Years) in Maintenance & Project field in Ammonia Refrigeration Plant, ice-cream, Dairy & Pharmaceutical Industries.

Supervisor maintenance and of trades/millwright / mechanic/water/rail

A results-focused manager and leader who drives project teams to deliver outstanding results. Professional Engineer with 21 years of diverse experience in the hydrocarbon processing and minerals processing industries. Has exceptional experience on owner & EPCM teams.

Heavy Industrial Fitter with extensive experience on Fixed & Mobile Plant & Machinery. I have worked in Cross Cultures as a Mechanical Trainer/Supervisor.

Geodetic Engineer exposed to various types of horizontal and vertical survey and can handle different geodetic engineering position.

Geologist / Geotechnical engineer

Piping Field Planner/Engineer through 15 plus years journeyman experiece in the industrial construction industry.

Working in Saipem and SNC lavalin joint venture Saudi Aramco water supply and injection project in SA, as a Instrument Pre-commissioning Supervisor (sub contract) last one year.

Over six years of experience in geotechnical engineering including earthquake engineering and mining engineering. Has performed numerous analyses in ground deformation, lateral spread and foundation settlements caused by static and seismic loading using both traditional analytical methods and advanc

Skills include: mechanical maintenance management, process engineering, project management, documentation and training, planning, procurement and contract management, budgeting, and sales.

INSTALLATION PIPELINES

Broad knowledge base and experience in both the design and construction of oil and gas facilities. Forward thinking individual with the ability to take on many tasks at one time. Motivated leader focused on building strong professional relationships.

Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering.

Qualify E&I Site Supervisor, QA/QC Inspector, Project Coordinator, Project/Electrical Engineer and as well as Construction Manager. Excellent Documentation Skill for Project Management.

I am a Postgraduate Civil Engineer trained in "PROFESSIONALS IN PROJECT MANAGEMENT( PRIMAVERA 6.1 & MY PRIMAVERA)" FROM CADD CENTRE .I have both Bachelors and Masters Degree in Civil Engineering.My specialization in M.Tech was Construction Technology and management,.

Electrical Installations and Commissioning Engineer in Low/High Power Distributions

Open Pit Slope Design, Tailings Dams, Plant Foundation Investigations, Earthworks

Design, Detailed Engineering, Engineering of DCS-Honeywell EPKS & Yokogawa Cenum CS. valve CV, Flow Element, PRV sizing. Foundation Fieldbus. FATof DCS. INTOOLS, InstruCALC, SPR. P&ID development. HSE member at FLUOR

5 years experience in piping stress analysis using CAESAR II in reputable companies

Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical)

10+ yrs experience in construction field with specialized in RCC structure & refractory material installation.

Completed Amusement and water Parks project in India and Bangladesh. I am Civil Engg. Diploma Holder. It is 3 year course.

Just I have graduated from Sheffield Hallam University in UK on October 2002 and looking for work opportunities throughout USA

I am a recent college graduate who majored in Civil Engineering Technology and is seeking the opportunity to gain experience, as an Entry Level Civil Engineer.

Engineer looking for job in construction industry in Los Angeles area.

The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively.

Experienced Project Manager/Engineer

Diploma in Mining Engg, AMIE Sec A&B in Mining Engg from IEI.

Urban Planner with GIS and AutoCAD skills

-Planning and scheduling using Primavera Project Planeer P3.1 &P6, Microsoft Project Professional / Structural Engineering Design Using Computer Softwares such as STAAD-PRO 2007, ETABS, SAP2000

Passed in diploma in civil engg in 2009 with 84.9%.

Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm

Electrical Technician/Cell Phone Technician

Project Management

Mining engineer and experienced manager with over 20 years of successful executive management, project development, engineering, construction and operations experience in the mining, tunneling, fossil power, rail and heavy construction sectors.

Seeking position as HSE/Training/Emergency Management for Petrochemicals or Refinery Operations

Construction Management professional with Heavy Industry ,Power, Energy, Mining sector experience

Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.

10 years of professional experience in commissioning trouble shooting and servicing heavy-duty diesel engines. Presently working as Senior Service Engineer, responsible for field service of Cummins Diesel Engines. I possess strong academic credentials and good communication skills.

An Entry level position within a growing industry that takes advantage of my electrical engineering education and skills.

A highly motivated, ambitious and systematic individual with exceptional interpersonal skills •Presently doing Masters in Mechanical Engineering with one year of full time experience as Design Engineer working on PRO-E.Proficient in Pro/Engineer 2000, Wildfire, Pro/Mechanica.

Strong structural engineering knowledge, Energitic, Good analitycal thinking, Self motivated, Hardworking, Dedicated person, Able to work under pressure.

LARGE AND STRATEGIC PROJECTS MANAGEMENT - BUSINESS AND OPERATIONS MANAGEMENT

Mechanical Engineer,masters in Engineering Design,CATIA V5,SOLIDWORKS

Qualification: Diploma In Civil Engineering(3Years), Over 11 years experience in Land surveying, the majority of which has been spent gaining experience of Surveying works using modern surveying equipments and Surveying software.

B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.

5 yrs experience in crushing & asphalt operation,maintenance,motor control centre,inventory control,switchgear.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out