Resume - An eight year experience including three year gulf experience, Abu Dhabi, UAE. E...

Misco Jobs

Resume #78094

CONTACT INFORMATION:
View contact information...

Objective
A challenging management position where my in-depth knowledge of technical and management can broaden the base of expertise in your firm.

Experience Dec 2005 – Present Archirodon Construction (Overseas)CO.
(Abu Dhabi Branch).
Ruwais 3rd NGL Train Project Jetty & Marine Facilities for GASCO (Division of ADNOC), Consultant by Snamprogetti, Italy.
The Project Contains 18,000 ton of structural steel distributed into
* 3.2 Km long of Jetty consist of 204 Piles, 80 Pile Caps and 83 Modules
* 38 Steel Jackets with Jackets Superstructures.
* Handrails, Walkways, Gratings and Ladders.
Senior Project Control Engineer (July 2007 – Present)
Project Control Engineer (Dec 2005 – July 2007)
 Supervise and coordinate all works related to structural steel fabrication.
 Direct quantity surveyors and draughtsman of all steel structure components.
 Coordinate between fabricators and all the company's departments.
 Follow up the implementation of the priorities fabrication.
 Control subcontractor's performance by verifying daily progress as well as review of drawings and specification.
 Visit the fabrication sites of the subcontractor regularly to inspect progress of work in accordance with design and schedule. Take necessary action if non-compliance is found.
 Order modifications and changes in design specifications to contractor if needed.
 Issue of fabrication progress reports and submit them for both management and client.
 Check and approve discipline related in subcontractor's invoices. Study, evaluate and approve all detail engineering deliverable.
 Prepare and submit the monthly invoices for the project to client.
 Participate in project budget preparation and submission to the corporate management.
 Responsible for preparing and issuing of all inquiries in relation with steel structure, and participate in technical, cost evaluation for selection.
 Plan and control the purchases and acquisitions along the project lifetime.
 Assist in devolving and maintaining delivery schedule for all steel materials, including the delivery arrangements.
 Verify of the specification of materials according to project specifications and client's approved list.
 Revise packing lists for end products due for shipment and handle the transportation process.
Aug 2004 – Dec 2005 The Egyptian German Company for metallic construction (DSD FerroMetalco).
Project Engineer
Objana Cement Plant, Nigeria international conference complex Sharm El Sheikh
 Fabrication and Construction follow-up.
 Establish the master time schedule of the project.
 Time schedule updating.
 Verify actual progress versus scheduled progress.
 Coordination between site and workshop.
 Maintain constant critical path analysis.
 Budget follow-up and cash flow control (Planned/Actual).
 Issuance of the project reports for both management and client.
 Administrate the sub-contract agreements and follow-up the subcontractors' progress.
 Follow-up the logistic activities including: transportation coordination, final packing lists review, third party quantity survey and issuance of shipping documents.
Aug. 2003 – Aug. 2004 Ahmed Abd EL Wareth ( AAW) Consultant Engineer
Site Supervision Engineer
 Supervisor for all the civil and Architectural works for the Mansh'yat Nasser Housing Project (4500 unit)
August 2001 – August 2003 El Roawd el Arab for Construction.
Site Engineer
 Supervised the foundations stage for the Meet Hashim elementary school.
 Site Manager for a government agency project (هيئة الرقابة الإدارية) in Banha City.
July 2000 – September 2000 EL – Khalil Engineering and Consulting.
Trainee
 Participated in Various Projects.
Education 2003-2005: The American University in Cairo- Engineering Services
 The professional Diploma in Project management- (PRMG)
 Graduation degree- Very Good (B).
 The following courses had been covered:
1. Primavera-Project Planner.
2. Management of Project Resources.
3. Project Planning and Control Techniques.
4. Project Budgeting and Financial Control.
5. Projects Feasibility Studies.
6. Projects Bids & Contracts.
1996–2001: Ain Shams University – Faculty of Engineering
 B.Sc., Civil Engineering – Public Works Department.
 Graduation degree- Fair.
 Graduation Project; Sanitary Engineering- Excellent.

Intellectual skills
 Good knowledge of Popular operating systems i.e. MS windows
 Good knowledge of M.S. Office Package, i.e. Word, Excel & PowerPoint.
 Excellent AutoCAD skills
 Excellent Primavera project planner skills.
 Good knowledge of PC hardware and software architecture.
 Mother tongue- Arabic.
 Fluency in English Written/Spoken.
 Comprehensible German.

Personal data
 Date of Birth: 20-June-1977
 Religion: Muslim
 Military Service: Exempted
 Marital Status: Married.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 3092)

Go to Search Parameters...

Brief Description

Associate Mechanical Engineer, Plumbing Design, Applications, Process, AutoCAD

Junior Mechanical Static Equipment Engineer

Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.

Over three years of experience in the application of earth science engineer expertise in the areas of Geomechanics, computer modeling using finite element modeling tools, site stabilization, expansive soils evaluation and treatment, soil/rock mechanics laboratory testing including procedures, quali

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

D/MAN CIVIL., AutoCAD2D & 3D

Over 15 years of rich experience in Project Execution & Management, & Engineering in oil and gas.

cool,hardworking,highly flexible

PRO-E DESIGN ENGINEER

Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)

I am a fresh B.Sc Electrical & Electronic Engineer.I am a citizen of Bangladesh.

To peruse the growth enrichment of career in envious of professional with an emphasis on computer based “Planning & Construction Management”

New Graduate looking for a entry level position.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

Inspection of piping.pipelines,offshore structures,welders qualification,pqr,internal audits,quality plans review,test packs review.

Project Management, Senior Mechanical Engineer, Mechanical & Piping Supervisor, Design Engineer

10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St

BS Mech/Indust Eng. Trade qualified: Marine Eng & HD Mech. Member: "Intl Assoc Airport Executives (Can.)" & "Inst of Transportation Eng (Can.)" Extensive o/seas experience as project engineer in frontier/conflict regions.

Site COordinator having 5+ yrs of experience in Construction on High rise Towers

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Constructional Blasting, Quarry work, Coal Mines

Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.

Lead Mechanical Piping Engineer Gas and Power Plant site office testpack hydrotest pipe support punch list

Cad Engineer

Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )

Water & Wastewater Specialist searching for a challenging position overseas.

Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri

Basically I am a networking engineer. Can do any work related in computer field and can install most of the software, can assemble computer.

diploma im mechanical engineering,able to handle all kinds of equipment s

Graduate in Civil Engineering and Post Graduate in Information technology. Having over 10 years of experience in Marine Civil Construction projects internationally.

Goal-driven & result-oriented Oil and Gas Engineer with a strong mechanical, pipeline, facilities & project engineering background and over five years experience in the E&P industry.

Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact

11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor

Electronics Engieer & MBA in operations and finance with 7 years experience in automation and control projects.Good in project management,PLC,SCADA,Coding.

Excellent Knowledge in Electronic Document Management System, Promote, set up and implement a document management department and system, making it appropriate to the needs of the project through the project lifecycle, Lead the Document Management department, providing effective direction and motivat

Excellent inter personnel skills with, a professional attitude, expert trouble shooter & problem solver, a firm personality to see tough jobs as a leader and a team member.

Substation, Construction, Maint. HV work

Oil & Gas, Petrochemical Industry Specialist

I am looking for a job as Technical Manager / Supervisor for heavy machines worldwide

All aspects of mineral processing plant construction

Maintenance experience.

An eight year experience including three year gulf experience, Abu Dhabi, UAE. Extensive experience in structural steel (fabrication, materials, drawings…etc). Diploma in Project management (PRMG) from The American University in Cairo, Egypt.

Senior Designer - Instrumentation - Electrical - Controls - Power

Quantity Surveyor

Management Representative (MR) for Quality Management System as Per ISO 9001

High - educated, experienced construction engineer. 10 years construction experience in civil building, high voltage electric lines, substations. Company management, team management, consulting.

B.Sc Engineering (Metallurgical), IRCA Registered Lead QMS Auditor, qualified EMS Auditor, Certified Quality Manager, Chartered Engineer (I) with over 30 plus experience in quality management field in oil and gas industry, having worked oversees since 1992 in Japan, Middle East and South East Asia.

Looking for senior position of project engineer electrical substation and T & D System, have MS from US in Electrical engineering and have over 17 yrs experiance of HV Substation Electrical field.

Indian, Chartered Civil Engr. Status, Aged 58, Civil Engg. Graduate (1970) With PG Dip in Management - 34 yrs in Engg / Construction out of which 25 yrs in O&G. Totally 21 yrs with Consultants / Clients & 14 yrs. with Contractors including 20 Yrs. outside India, in Nigeria, Oman, Kuwait & Qatar

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out