Resume - Education from both China and United states major in transportation engineering ...

Misco Jobs

Resume #78875

CONTACT INFORMATION:
View contact information...

OBJECTIVE A challenge position in Transportation Engineering

SUMMARY of EXPERIENCE
He got his education from both China and United states major in transportation engineering and computer science. As a transportation engineer with more than 10 years' experience in both United States and China, his work extended from general transportation infrastructure design, transportation planning, traffic engineering to intelligent transportation system(ITS) design and computer programming applications in Transportation Engineering. He was the project manager for two large projects in China which were funded by World Bank.

EXPERIENCE
Jiangsu Beisheng Engineering Consulting Inc. 02/08-present
Deputy Chief Engineer & Department Manager
„c Wujiang road network modification Plan. The Transcad software was extensively used in this project. Existing traffic volume was used to estimate OD matrix. Fratar method was applied to estimated future trip distribution.
„c Nanjing 1st class road network planning. Both quantity and quality analysis were used in the project. In quantity analysis, the four-stage travel demand forecast procedure was used to predict future traffic volume. In quality analysis, socio-economic factor and land-use pattern were analyzed.
„c Nanjing Ring road traffic forecast. Typical four step travel demand forecasting method were used to predict traffic volume on the Ring road.
„c Jiangsu Provincial Multimodal Transportation Strategy Study. Evaluate the existing transportation problem. Proposed new development plans for different transportation mode.

ATKINS Beijing 06/06-02/08
Senior ITS Engineer
„c Beijing traffic demand management study. this project is funded by the World Bank. The purpose of this project is to make and evaluate appropriate traffic demand management policy and make plans to implement these policies.
„c Guangzhou Automatic Public Transport Monitoring & Dispatching System. This project is funded by World Bank. The purpose of this project is to increase bus rideship, enhance bus service level, reduce car ownership thus relief traffic congestion and pollution in the city by implementing some software and hardware such as GPS-based on-bus unit, roadside electric display panel and central control software.

Parsons Brinkerhoff Beijing 03/05-05/06
Senior Transportation Engineer
„c Preliminary study for Beijing Land use and transportation integration Study, extensive literature review of difference land use and transportation integration models such as UrbanSim, MEPLAN/TRANUS, Place3s, CUF,DRAM/EMPAL and compare these models in different aspect.
„c Beijing TIA procedure study, develop a state-of -art TIA evaluation procedure for Beijing transportation committee, creating new survey format, absorbing best experience from western country's practice.
„c Yizhuang new city transportation and Transit Oriented Development(TOD), working with top city planner in the world and develop TOD strategy for Yizhuang, analysis of existing land use and transportation problems.
„c Beijing express subway feasibility study, extensively used TRANSCAD to model transportation demand for potential subway corridor.
„c Xian West Market Traffic Impact Study
„c Boston Gillets Stadium Pedestrian Simulation. Simulate the ingress and egress pedestrian flow. Assess the pedestrian flow rate versus capacity of entrance and exit of the stadium. Evaluate the impact of pedestrian flow on the facility. Suggest improvement for the stadium design.

Jiangsu Transportation Design Institute Nanjing, Jiangsu 10/03-03/05
Senior ITS engineer
„c Web-based Vehicle Monitoring and Dispatching System Design Based on Combination of GPS, GIS, GSM and Internet Systems for Kuailu Transports Inc.
„c Monitoring system, toll system and communication system design for Hunin freeway widening project
„c Traffic Engineering Design for Changzhou Ring Road
„c Traffic Engineering Design for Lin-Jin-Yan Freeway
„c Traffic Monitoring system design for Sutong Bridge
„c Fog detection and traffic management system design for Hulin Freeway
„c Traffic Incident detection and traffic control system design for Lian-Yan Expressway
„c Traffic incident management and emergency rescue system design for Hunin Freeway
„c Traffic signs research for freeway interchanges, complementarities to national standard
„c Freeway service area planning standardization research
„c Systems integration research for Sutong Bridge
„c Toll booth capacity research

Parsons Brinkerhoff Fort Lauderdale¡AFL 09/02-08/03
System Engineer
„c GIS-based rideshare software development
„c Gather, convert, edit, analyze and manage spatial data to produce GIS maps for South Florida Commuter Services
„c Integrating MS SQL server and access databases into GIS maps by using Mapinfo, Mapmaker, Maptitude and ArcView.
„c Exploring and resolving inconsistencies and ambiguities in existing data.
„c Develop and maintain website for South Florida Commuter Services (www.1800234ride.com) by using HTML, Javascript, VBscript, ASP and other web-developing tools.
„c Network administration and PC trouble shooting
„c Maintain and update the existing database using SQL server and Access

Civil & CADD Engineering Inc. Miami, FL 10/99-11/00
Transportation Engineer
„c Compiling, converting, creating and documenting relevant geospatial datasets for Traffic Forecasting for Downtown Miami by using ArcView, ArcInfo and Maptitude.
„c Traffic signs and signal system redesign for Overtown, Miami.
„c Homestead airport roadway system improvement design.
„c Fort Lauderdale airport improvement design
„c Prepared test plans and test cases, integration and system tested enhancements
„c Prepared software specifications, user cases, user requirement and functional requirement analysis
„c
Kirkham Michael & Associates. Denver, CO 08/97-08/98
Civil Design Engineer
„c Re-design of U.S. Route 6. Autocad and eaglepoint were extensively used in the design. CDOT highway design standard and AASHTO highway design manual were used as reference.
„c Santa Fee/ Colorado Blvd. Interchange design
„c Three Intersections improvement redesign for city of Colorado Springs by using HCS.

Jiangsu Transportation Design Institute Nanjing, China 1992-1995
Civil Engineer
„c Nanjing new city roadway system feasibility study and design.
„c Nanjin-Shanghai highway design.
„c Nanjin-Lianyun port expressway design( from feasibility study to construction design)

EDUCATION: Florida Atlantic University 8/00-12/02
MS in Computer science

Southeast University 9/88 ¡V 7/92
BS in Civil Engineering

KEY
COURSES * Object-Oriented Analysis & Design * Data Structure and Algorithm Analysis
* Computer Performance Modeling * Local/Metro Networks
* Advanced Database System (Oracle SQL Java) * Operating System * Computer Communication Networks * Design & Analysis of Algorithm
* Theory and Implementation of Database Systems * User Interface Design
* Highway design * Traffic Engineering Characteristics
* Transportation Planning * Geography Information System
* Travel Demand Forecasting * Computer-Aided Design

Publications
"Traffic Incident Detection System Research for Lian-Yan-Tong Freeway", Jiang Qian, "The Sixth China Freeway Electric and Mechanic Conference". June 2004, Beijing, China
"Fog Detection and Traffic Control for Freeway", Jiang Qian, Transportation Information Industry Journal.' November 2004

REFERENCES * Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 3124)

Go to Search Parameters...

Brief Description

I have 15 yrs experience in construction supervision of roads and bridges (RCDG), concrete slope prot. works, RCBC and concrete retaining walls. Presently I am working in Saudi Arabia as Civil Engineer handling big highway proj. designed for asphalt pavement.

Sr Instrument Engineer with over 15 years experience in the design and specifications of instrumentation for petrochemical plants, and 2 years for offshore platforms

Structural/Geotechnical Engineering jobs such as Pile design, Retaining wall design and project management

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

I have 17 years of Planning experiences within oil and gas, petrochemical, mining, power plant and industrial plant construction. I am also an advance user of P3/P5/P6.

Project & Construction Manager

B.E. with 22 years of experience in Highways, Industrial and Building construction, out of which 3 years in Saudi Arabia. The experience includes-

I am a sri lankan working in oman -presently in the field building services as an engineer. Capable of designing - cold & hot water supply systems, sanitary plumbing stsems and fire fighting systems)

I have been in Truss deaign,layouts,and engineering for approx.36 years. I have experience in single family commercial,spealizing in multifamily design of beams, componets,floors and roof trusses

Total station operator

15 year of experience in the glass and aluminium industry

Application for the post of project manager/ section manager

Debasis is a geotechnical engineer and numerical modelling specialist within Scott Wilson’s Ground Engineering team. He is currently responsible for numerical modelling and geotechnical design input for tunnel linings, retaining structures and earthworks working on a variety of infrastructure sche

Professional individual having Soil Investigation, Soil Improvement, Diaphragm wall construction, Quay wall construction, Piling, Drilling Techniques (All Types) Geotechnical Special Testing, Material Testing, Geotechnical & structural Instrumentation & Geological Mapping skills.

Electric Engineer

B.Eng, Traffic and Transportation Planning and engineering, local area traffic management, transportation modelling, sidra, transyt, trips, bus transit, light rail route and station planning

Traffic Engineer with Master of Technology degree in Transportation Engineering. I have about 11 years of technical and project management experience in UAE, Qatar, India, Sudan and Saudi Arabia, in the area of traffic and transportation engineering/planning;

Advanced Certified Interconnect Designer. Trade Radio Technician. Diploma Electronics Eng. CID & CID+ Training. 17 years experience in both Comercial and Defence (Aus) Specialising In High Speed Digital, RF, Analogue and Video Board Design using Altium Software.

Piping design and gernal 3D model design using AutoCAD and CADWorx. Conduct reviews for Design Engineers and Field Engineers with Navis software. Direct drafters in preparation of drawings and plans. Coordinate drawings with other design agencies, fabrication and construction.

NDT level III, Senior certified welding inspector, experienced in most industries

Results oriented engineering professional with 20 years experience in project management, process engineering, and facility engineering

Directing Large Engineering Teams.

VERY GOOD EXPERIENCED IN CIVIL ENGINEERING AND CONSTRUCTION PROJECTS SUCH AS CONSTRUCTION OF BUILDINGS, ROADS, HOUSES AND HOSPITALS.

I am a railway track engineer past 25 years in INDIA, MALAYSIA,DUBAI METRO PROJECT.

Project Manager in Civil Engineering with 14 years experience. Excellant communication skills and able to work under pressure with minimum supervision.

Over 15 years of working experience in the construction projects on heavy civil works, roads, bridges, metro rail, building construction, petrochemical plants, industrial plants, multi – purpose irrigation system, commercial/ residential buildings, and knowledge in Engineering Tendering and Contrac

Power pant engineering

Above 14 years of worked experienced in Instrumentation and Electrical Control System overseas in a Reputable International Construction Companies. Supervision, Erection, QA/QC Inspection, Start-up, Commissioning and documentation works. Review Design and technical responsibilities for good quality,

I have Eleven years of experience in Architectural design development, planning & scheduling, DD & CD development for Architectural/Interior projects. I have experience on windows environment and worked on CAD Applications like ACAD, Revit implementation and management tools like MS Project, Primave

Qualification:Bachelor of Engineering(Civil),from Assam Engineering College,Experienced in design of RCC Bridges with Pile /Well foundation

Significant experience in electrical construction, commissioning, production and maintenance

I am applying for a position that suites my qualifications and experiences. Civil Engineer, who have high proficiency in Project Management, People Handling, Problem Identification and Definition, Problem Solving, which I acquired thru my long time exp

Capable to manage an organization for Electrical and Civil Engineering jobs.

A higly adaptable professional of proven ability with extensive on-site experience in worldwide locations who offers: construction and civil works expertise, safety and QA/QC awareness

Education from both China and United states major in transportation engineering and computer science. As a transportation engineer with more than 10 years¡¦ experience in both United States and China, his work extended from general transportation infrastructure design, transportation plan

Heavy civil construction skills. Concrete apllications and procedures. Sediment and erosion. Overhead and underground utilities construction. Heavy equipment operation. Regulatory laws pertaining to heavy construction.

Marine Surveyor

FOR THE POST OF QUANTITY SURVEYOR (BUILDING SECTOR)

Certified PMP having rich experience in EPC & construction management of Real Estate, Infrastructure and Petro-chemical Projects, Proficient in Primavera, MS Project and MS Office

B. Com. 16 years of experiences different construction materials such as soil, aggregates, concrete & asphalt laboratory & field test & Prepared test reports by using computer.

Land Surveyor , Autocad Tech.

Mr. Bipradas Rajbongshi is a specialist in the field of Geotechnical Engineering. He has 20 years experience in technical and managerial roles.

Over 13 years experience in positions including Project Engineer, Quality Control Engineer, Civil Engineer, Project Planner and Scheduler, Estimator, Crane Lift Supervisor, Welding Inspector, Land Surveyor and Draftsman. Nine years performance on U.S. Military Construction Programs

Piping Designer (HVAC Piping and Plumbing Systems)

Bitumen storage terminal construction and all bitumen products manufacturing expereince

Mechanical building services design engineer. Experience in design HVAC, Plumbing & Fire Fighting along with site supervision and project management activities.

Instrumentation technician with 20+ years of experience

Mechanical Designer with over 20 years experience preparing process piping layouts, hydraulic and pneumatic schematics, isometrics, assembly, P&ID’s, and detail drawings, as well as laying out the placement of mechanical equipment. Adept at performing field walkdowns, surveys, and meeting with clie

Electrical Engineer

Qualified Experienced Senior Construction Inspector

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out