Resume - Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC ac...

Misco Jobs

Resume #78983

CONTACT INFORMATION:
View contact information...

Employment

16/06/2008 – Present Granite International (GSI), Central Europe

I am currently hired via GSI and utilised on various GE owned businesses, predominantly Aero. I am presently assigned to Installation & Commissioning on-site training of GE's LM6000 packages with the prospect of becoming a TA for GE installations worldwide. I previously spent 6 months in GE Energy service workshops based in Rheden, The Netherlands. Though relatively new to working with the internal components I gained knowledge and experience whilst applying my skills working on all aspects of their LM6000 Gas Turbines. From time to time I also assist GE Water Technologies on their mobile water treatment purification trailers as an Operations & Maintenance Technician. As an experienced tradesman and Gas Turbine operator, I am considered for contracts with GE Energy Rentals to further provide skilled labor on both Engine Maintenance Support, and Operations & Maintenance of their TM2500 Mobile Power Plant.

01/04/2008 – 10/05/2008 NRG Global, Pakistan

Working self employed I was utilised in planned maintenance of seven General Electric LM2500 Gas Generators. Having previous experience of the site and equipment on the original installation and the operations, I was approached to assist Aero representatives in carrying out removal of engine, top casing and blade changes, as well as hot sections and nozzle changes. In between maintenance periods I was also required as an Operations and Maintenance Technician to ease pressure from longer term site staff.

13/09/2007 – 31/03/2008 Granite International (GSI), Central Europe

I was recruited predominantly to work alongside GE Aero Derivatives on European contracts. I have assisted Aero in the removal of engines (and in cases the Power Turbine) from the package for major overhaul. Re-installation & alignment, and pre commissioning of land mounted units, generally LM2500. Having an appreciation and experience of Operations and Maintenance of their TM2500 power plant as a package for GE Energy Rentals, I gained further experience solely on the LM2500 Gas Generator itself. Working to GE guidelines and procedures, fulfilling Aero FSR expectations, I now have a greater understanding of Engines and the strict mechanical work required, particularly on installs.

To become more flexible for Granite I accepted a request to attend classroom training for GE Water Technologies. I then worked on operations and maintenance within Europe on GE Mobile Water Treatment plants, providing various levels of purified water to suit client specification based upon plant requirements. I have gained further knowledge of chemistry and the direct use in water treatment. I have obtained operations and maintenance experience of mobile plant including 6 stage Filtration Systems, Reverse Osmosis, De-Aerators and DI Trailers and their effectiveness and efficiency within the water purification and treatment industry.

08/06/2007 – 03/08/2007 NRG Global, Kuwait

Installation Supervisor: Working Self Employed as PB Globetech Ltd, however sub-contracted to TC Power via NRG Global on a rotating shift basis. Working as a team member my role is to oversee and assist in a new installation of six General Electric LM6000 gas turbine units. Responsibilities include liaising with client on a daily basis regarding progress, safety concerns if applicable and relevant issues. Accountable to Project and Installation Managers I am supervising a team of ex-patriots, and local labor of up to 20 personnel.
Additionally
* Responsible for install progress and updates
* Responsible for implementing health and safety measures
* Ensuring all mechanical lift machinery are operational and available
* Progression of installation and commissioning movements
* Identification and rectification of problems

08/12/2006 – 27/05/2007 NRG Global, Pakistan

Mechanical Technician/Turbine Operator: Working Self Employed however subcontracted to General Electric Energy Rentals via NRG Global I was part of a team responsible for the installation, operation and maintenance of seven TM2500 mobile gas generators utilised on a WAPDA Power Station in Pakistan.
Additionally:
* Self motivated mechanical technician and turbine operator
* Key team member within specialist install team
* Shaft alignment technician utilising Pruftechnik Rotalign Pro
* Condition monitoring of package machinery
* Contribution towards operator training of local personnel and ex patriots
* Familiar with relative local and remote HMI computer operations software
* Team empowerment and inspiration. Also able to contribute greatly on own initiative

28/04/2006 – 01/12/2006 NRG Global, South Africa

Mechanical Lead/Turbine Operator: Operating via NRG Global I was subcontracted to General Electric Energy Rentals for a period of seven months. I was responsible for the installation, operation and de-mobilisation of three TM2500 mobile gas generators based on a PetroSA Oil Refinery.
Additionally:
* Contribution towards achieving install deadlines as a key member
* Shaft alignment technician utilising Pruftechnik Rotalign Pro
* Ensured effective maintenance of relative machinery
* Ensured client dispatch requirements were fulfilled
* Maintaining a very good client relationship
* Appointed leading mechanical hand relative to de-mobilisation
* Achieved record de-mobilisation target, whilst ensuring health and safety requirements were the optimum goal throughout

01/09/2004 – 23/02/2006 IPM Industries, Thornaby

Service Engineer: Employed on a permanent basis to overhaul client pumping equipment, whether on site or in the IPM workshops. When necessary I was also subcontracted out to local and national refineries, steelmakers and chemical industries. I was also utilised overseas installing and demobilising mobile power generation equipment for General Electric.
Additionally:
* Rotating equipment specialist
* Competent in maintaining heavy plant machinery and equipment
* Rotalign Pro laser alignment technician
* Maintaining good client relationship via personal conduct
* Health and safety awareness

02/04/2001 – 27/08/2004 Ceetak Engineering Ltd, Middlesbrough

Service Engineer: Employed on a permanent basis to overhaul a wide range of client pumping apparatus and rotating equipment both on site and workshop based. Responsibilities included quotations, recommendations and sourcing of spares and replacement units. Within this role I was required to assist the workshop manager and area sales engineer by taking on some of their duties on a regular basis.
Additionally:
* Rotating equipment specialist
* Optiline laser alignment technician
* Administration
* Knowledge of working in petrochemical, chemical, oil & gas and pharmaceutical industries
* Health and safety awareness o
* Management of workshop and stores

16/11/1998 – 30/03/2001 SLD Pumps Ltd, Chester le Street

Diesel Pump Fitter: Employed on a permanent basis to overhaul a range of diesel and electric driven Godwin self priming pump sets within the company fleet. Based in the central repair centre I was responsible for the repair/overhaul for a range of diesel engines, self priming pumps, compressors and vacuum pumps, as well as rectifying any chassis damage. All serviced pump sets were performance tested in house prior to release from the centre.
Additionally:
* Rotating equipment specialist
* Manufacture of 12/24v engine wiring looms
* Knowledge of Volvo, Cummings, Perkins, Ford and Lister-Petter diesel engines
* Manufacture of brackets and steelwork
* Occasional management of stores and stock levels
* Compliance with company and OEM standards

16/06/1992 – 13/11/1998 Clydesdale Forge Co, Hartlepool

Mechanical Technician: I was initially recruited as an apprentice on a permanent basis, and retained as a fully qualified Technician following completion of my apprenticeship. Responsible for repairs and maintenance of all company machinery, and ensuring all plant equipment was kept in good operating condition. I was selected to be part of a product improvement team for my mechanical input and system modification suggestions. I also set up a PC controlled routine maintenance schedule to aid prolonging component life and reducing machine downtimes.
Additionally:
* Knowledge and competency in maintaining a range of forging and stamping machinery
* Control of PC assisted routine maintenance
* Knowledge of pumps & valves, hydraulics & pneumatic systems, brake & clutch systems, cams and followers
* Enthusiastic team player

Skills

* Capable, competent, reliable and responsible
* Ability to work on own initiative or as a team member
* Methodical and able to apply fault finding techniques
* Very good communication and administration skills
* Trained alignment technician
* Computer literate
* Welding and fabrication
* Basic electrical skills
* Basic lathe skills

Education

1987 – 1992 The English Martyrs Comprehensive School, Hartlepool
(GCSE'S) Mathematics, Modular Science, Art and Design, Graphic Design, English Language,
English Literature, History, French, Religious Studies
1992 – 1993 Stockton & Billingham Technical College, Stockton
BTEC First Certificate in Engineering
1993 – 1995 Hartlepool College of Further Education, Hartlepool
BTEC National Certificate in Mechanical & Production Engineering
1995 – 1997 Hartlepool College of Further Education, Hartlepool
BTEC Higher National Certificate in Mechanical & Production Engineering

Training Courses

Jun 1993 Entra (Engineering Training Authority)
NVQ Level 1 & 2 Mechanical Maintenance Skills
Jan 1996 Clydesdale Forge Engineering Company
Slinging and Pendant Controlled Overhead Crane Driving
Oct 1996 Entra (Engineering Training Authority)
NVQ Level 3 Engineering Maintenance - Mechanical
Oct 1999 SLD Pumps Limited
Counterbalance Fork Lift Truck Operator Certificate
Sep 2001 Ceetak Engineering Limited
Glandless Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Centrifugal Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Vacuum Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Progressive Cavity & Positive Displacement Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Mechanical Seal Maintenance Competency Training
Jun 2002 Pruftechnik AG
Optiline Laser Alignment Training (Uncertified)
July 2002 AES Seal Plc
Mechanical Seal & Systems Training Course
Sep 2002 AES Seal Plc
AES Seal Correspondence Course – Bronze Award
Jun 2003 Pruftecknik AG
Vibrotech Condition Monitoring Training (Uncertified)
Sep 2004 IPM Industries – In House
Rotalign Pro Laser Alignment Training (Uncertified)
Jun 2006 General Electric – Non certificated EHS Training in accordance with GE policy (NRG)
May 2007 NRG Global – In House
Rotalign Ultra Laser Alignment Training (Uncertified)
Sep 2007 General Electric – Non certificated EHS Training in accordance with GE policy (GSI)
Nov 2007 General Electric – Non certificated mobile flow school, GE Water (GSI)

Hobbies

* Motorbikes
* Travel
* Cycling
* Running

References

* Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2351 to 2400 of 3123)

Go to Search Parameters...

Brief Description

Extensive experience & strong, decisive, and profitable leadership in utility & pipeline design,construction & maintenance management. Keen financial, negotiating, and strategic planning performance. Consistent and measurable gains in operations, safety, quality, efficiency and productivity.

I'm mechanical engineer specialized in hydraulic and pneumatic installations, with a large experience in design, maintenance, reparation for this equipments in various industry(civil, constructions, marine, production)

Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC academic, and GNVQ 3 Trade Certs. I have installation & Commissioning of both LM2500 LM6000 packages and Operations & Maintenance of GE's trailer mounted LM2500 Gas Turbine.

I will be completeing my degree in June 2005. Geoscience skills include slope stability assessment, geological and geomorphological mapping, risk, hazard and vulnerability assessment, geotechnics, seismology, rock engineering.

Fresher with diploma&engineering and with good knowledge in design and design softwares like CATIA,UG,PRO-E

I have done a 4year degree course (B.Tech) in Mechanical Engineering from an autonomous institute. My software knowledge is eqipped with Auto Cad and Pro-E Softwares.My communication skills are excellent.

Autocad,Primavera

Mechanical Engineer hands-on

A Certified PMP and a Civil Engineer with Experience as a Project Controls Engineer in International Projects in the Middle East with experience in Primavera Project Planner 3.1, Expedition, P3e 4.1 as well as using Database Mgmt Software such as Access. In addition to my site experience

over 14 years of Quality Control and Assurance within the Construction and Facilities Maintenance field. Providing leadership and Quality Control in a variety of New and or expanding projects ranging from military and civilian aircraft runways, slip form, facilities maintenance, and industrial plant

diesel engine mechanic, rig mechanic , generator mechanic

Engineering Management/Research Consulting Position—where my environmental, health and safety engineering research expertise, industrial engineering competencies, effective communication skills, strong leadership qualities, and potential to conceptualize and implement improvement initiatives

Project Manager / Product Manager with excellent people skills

WELDING ENGINEERING, WELDING INSPECTIONS, MANAGEMENT, QA/QC, NDT INSPECTION

B.Tech,Instrumentation ,Design Engineering, Erection and Commissioning in the Oil & Gas field for Onshore and Offshore Process complex /Platform and Drilling rigs And FPSO

Experienced financial analyst with over 15 years of domestic and international integrated oil and gas company experience covering a broad spectrum of activity. Proven expertise in the areas of Finance, Accounting, Project Management, Materials Management, Systems implementations (SAP/R3).

Proactive management professional with solid business/technical leadership in the oil and gas area. Team builder and problem solver with proven track record of invigorating organizations. Has international contacts, exper. in complex contract negotiations, project planing-design-financing.management

25 years mining and heavy industrial , power generation,technical trainer,maintenaince supervision superintendent roles, 6 years expat work in 4 countrys ,extensive exposure to MARC's and dealer systems,all mining equipment covered diesel and electric

Strong Experience in the area of Safety (Health, Safety & Environment). Coordinating with other construction departments on HSE related issues. Consistent performance with ability to take up responsibility and deliver results.

Junior Engineering Design and Drafting Technologist

Professional engineer with wide ranging international experience in project, engineering, reliability, business development, sales and commissioning of refinery.

Good communication skills and excellent goals getter. A graduate of Applied Geophysics with hons, from O.A.U, Ife, Osun State, Nigeria. My career objective is to obtain a challenging position in a well structured organization that lays emphasis on excellence, goals achievement and self development.

Supervising, Inspection, Installation, Maintenance, Computer application and coating specialist

Electrician

Development, Installation, Sytems/DBase Training

I am a hard working self disciplined person with good values. I've got lots of experience in both my fields of qualifications. Earthmoving Mechanic (Heavy duty mechanic)

More than fourteen years of professional experience including six years of Saudia as Instrument engineer, Electrical engineer, Superintendent Electrical & instrumentation, Manger plant maintenance and Project Manager in the field of maintenance, construction and technical support services.

Chemical Process Engineer

Laboratory Director, ISO certification and Quality experience, Environmental field, strong analytical background

I have got 19 years experince in pumps and valves .

Project cost control / scheduling

Proven ability to provide Industry initiative and leadership. 20 years of experience with all aspects of integrated instrumentation, software design, project management, and installation of projects. Projects of various magnitudes ranging from board level to major industrial development.

Project Controls / Planning / Scheduler

I am a highly motivated and ambitious Senior Electrical Engineer who worked in Emirate , Saudi Arabia , Kuwait , Iraq & Lebanon since 1994 and interested to pursue my future professional career in your company. The scope of work I am looking for is a job in the field of Residential Industry ,

Over 26 years experience of Gological Explorations for various minerals in Government Sector. Now seeking for an upward change.

Total of 3 1/2 years experience in Downstream Oil and Gas, Chemicals, Construction, Shell Global-SAP Project - comprising positions as: Process Specialist, QC Inspector, Process/Utilities Operator, and SAP Mechanical Data Implementation Staff. Knowledge in HSE, process, reads/interprets P&ID/PEFS,

Mining and Construction Supr

OHST - Health, Safety & Environmental - HSE

40 years in the land surveying profession, 30 years as a Licensed Land Surveyor, Multi-state Licenses

Telecommunications Professional Engineer with strong analysis capability, deep knowledge on telecommunications networks and telecom business processes. Outstanding operating, managing and administrative skills. Proficient usage of office utilities and advanced expertise with excel macros.

As you will see from my attached RESUME, I am an Indian citizen, and have a Bachelors degree in civil engineering, which I have passed in first division with distinction and I have 9 years experience, in positions of Project Manager, Project Engineer & Site Engineer.

Cartographer for oil and gas

Marine Engineer from Greece, Languages: Arabic, English, Greek, Italian. Experience = 16 Y. Eni Oil Co. Ltd.1/6/ 1999. Title Senior Plant technician, skills: Microsoft word, excel, Amos, Internet

Field Service Engineer

I’m a graduated of Diploma in Civil Engineering from Universiti Teknologi MARA on DECEMBER 2005. But now i am still studying and will finish my degree in civil engineering in December 2009. I have taken the courses that related and appropriate to the program during my learning years in UiTM such as

Mechanical engineer (4 yrs degree) with appx 15 yrs exp in Contract & Project management. LOOKING FOR CHANGE IN MIDDLE-EAST, CANADA OR INDIA (AVAILABLE FOR IMMEDIATE START)

Working as a safety officer in petrochemical company with 5.5 years of experience .

Project Engineer experienced in report writing, proposal prep, health and safety audits, process hazard analysis, budget maintenance, field crew management, client relations and preparation of P&IDs

Instrument Specialist with over 13 yrs experience in both domestic and overseas facilities.

Around 20 years experience in all QA/QC activities up to final certification of equipment and projects catering to Oil & Gas (Production Platforms, Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbuilding.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 [ 48 ] 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out