Resume - Hull / fields/site engr. structural detailer have an experience in shipyard indu...

Misco Jobs

Resume #79018

CONTACT INFORMATION:
View contact information...

Objectives:

Interested to fill-in the position of hull engineer/site engineer/field engineer, architecrural, electro-mechanical and structural detailer or any position that suit my qualification that your company is need of.

Work History:

August 8, 2008 at Present
Site Engineer
Structural Detailer (shop drawing)
Architectural Detailer (shop Drawing)
Construction Department
Boom General Contractor
P.O. 22145 Box State of Doha Qatar W.L.L

Job Description

Construction Division: project handled- Multi-Storey Car park (8 storey building).

* Review architectural or engineering plan and specification.
* Reviews Subcontractor 's shop drawing to ensure compliance with specifications
By checking them for technical accuracy according to accepted
Guidelines.
* Advices Subcontractors on the interpretation of plans, recommends changes if necessary.
* Prepare shop drawing including architectural, structural, electro-mechanical works associated with building construction for the approval of the consultant before execution.

March 10, 2008 to August 4, 2008
Charge/Hull Engineer
Hull Department/ Special Project
Subic Shipyard and Engineering, Incorporated
Bo. Cawag, Subic, Zambales, Philippines

Hull Dept.: project handled- Ship repair/Ship building/Ship conversion

* Assist my superior in developing plans and programs for the different work activities of Hull Section, and sees to it that goals and objectives are clearly established and defined for specific ship repair, ship building and ship conversion projects.
* Assist my superior in planning and forecasting the daily manpower requirement/and in deployment of personnel under my area of responsibility to do the job assigned to my group to ensure timely completion of steel works.
* Assist my superior in according with other section regarding steel and structural works, specification and schedules. Ensures that all works within the specification, schedules meet quality standards and in accordance with the approved standard operating procedures of the company.
* Assist my superior in the preparation and controlling of Subcontractor's Requisition Slip (SRS) based on labor, materials used, manpower requirement and man-hours consumed in particular project and sees to it that these are properly listed for billing purposes.
* Develops plans and programs that will enhance housekeeping guidelines, quality standard, as well as safety policies, rules and regulations.
* Exercises independent judgment and discretion in leading and controlling my men under my area of responsibility. Report violation of Company Rules and Regulations for appropriate action.
* Performs other duties that may be assigned from time to time.

July 15, 2007 to March 08, 2008
Structural Detailer
Planning Department
Subic Shipyard and Engineering, Incorporated
Bo. Cawag, Subic, Zambales, Philippines

Job Description

* Prepares inspection result/repair plan on surveyed items using windows based software such as AutoCAD
* Responsible for the preparation of plans and drawings based on the specification of repair as may require.
* Prepare accurate engineering drawings/plans of various repairs and structural design of ship and other special project.
* Prepares panel format, nested drawings using AutoCAD.
* Converts AutoCAD drawings to Data interchange format (Dxf).
* Converts Dxf to NC format using NC-Pyros ShipConstructor.
* Performs other duties that may be assigned from time to time.

February 16, 2007 July 14, 2007
Assistant Structural Inspector-
QA Department (Quality Assurance)
Subic Shipyard and Engineering, Incorporated
Bo. Cawag, Subic, Zambales, Philippines

Job Description

* Inspect and monitors on-going projects to ensure that the standard operating procedures of shipbuilding and work specification are being followed.
* Perform inspection of all structural system, welding works and component installation.
* Prepare accurate engineering drawings/plans of various repairs and structural design of ship and other special project.
* Analyze set of drawings and prepare panel sequences and assembly.
* Prepare as-built drawing using auto-cad.
* Performs other duties that may be assigned from time to time

Augost 09, 2006 to February 15, 2007
Draftsman-
Planning Department
Subic Shipyard and Engineering, Incorporated
Bo. Cawag, Subic, Zambales, Philippines

* Responsible for the preparation of plans and drawings based on the specification of repair as may require.
* Prepares inspection result/repair plan on surveyed items using windows based software such as AutoCAD
* Performs anchor chain calibration.
* Perform UT gauging.
* Analyze set of drawings and prepare panel sequences and assembly.
* Performs other duties that may be assigned from time to time

January 2003 to July 2006
Designer/Project clerk
L9 Diamond Enterprises
San Marcelino, Zambalez, Philippines

Project handled: Commercial, Institutional and Residential Building Construction.
Job Description

* Assist the Principal Engineer in preparation of the design schematics in accordance with the requirements given by the Owner or the Client.
* Prepares, plan and organizes, implements, controls, distributes and carries out work assignments on sites as a member of the team and ensures work progress, safety, efficiency and quality.
* Prepare set of Drawings include Architectural, Structural, electrical and Plumbing.
* Responsible in studying and implementing drawing/plan requirements defined in the reference sheets or work specifications issued by the owner or client.
* Prepare 3D drawing using 3Dmax, AutoCAD and Autodesk Viz 5.
* Prepares documents required in application for building permits and other requirements that may needed in compliance with the national Building Code.

January 2000 to July 2003
Draftsman
Subic Municipal Hall (Engineering Deparment)
Subic, Zambalez, Philippines

Project handled: Institutional Building Construction

Job Description

* Prepare set of Drawings include Architectural, Structural, electrical and Plumbing. (Manual Drafting). Given by the Municipal Engineer.
* Prepare Manual Rendering for presentation.
* Prepares documents required in application for building permits and other requirements that may needed in compliance with the national Building Code.

Education:

College:

1. Graduate - Bachelor of Science in Architecture
March 31, 2006 Under Special Order No. (B) (R-III) No. 50-580101-008 S. 2006
Issued by the Commission on Higher Education
Issued on June 8, 2006
Columban College, Olongapo City, Philippines

2. Graduate - Associate in Architectural Design and Technology
April 08, 2000 Under Special Order No. (B) (R-III) No. 40-580102-013 S. 2000
Issued by the Commission on Higher Education
Issued on July 25, 2000
Mondraian Aura College – Subic Bay Freeport Zone- Subic Bay Metropolitan Authority, Philippines

Vocational:
Certificate in Autodesk Viz 5
Microcadd Technologist (Autodesk Training Center) San Fernando, Pampanga, Philippines
September 6, to October 11, 2005

Computer Skills:

* MS Office (Excel, Word, Publisher and Ms Project)
* AutoCAD R13 to 2009 version
* NC-PYROS ShipConstructor
* 3D Studio Max
* Autodesk Viz 5
* Sketch-Up 4.0 & 6.0
* Adobe photo-shop,Jasc and Corel Paint Shop Pro

Training and Seminars:

1. Plant Tour and Seminar – Boysent Paint, Trece Marteres, Cavite
2. Orientation on Security, Safety, timekeeping, Benefits, Company Rules and Regulation,
And ISO awareness.
Subic shipyard and Engineering Inc,.

PERSONAL INFORMATION:
Age: 30 years old
Birth Date: October 02, 1978
Height: 5' 5"
Weight: 68 Kg
Health: Good condition
Civil Status: Married
Nationality: Filipino

Languages spoken:

English and Filipino

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 3118)

Go to Search Parameters...

Brief Description

Qualifications: B.E (Mechanical). Graduated with second class, first division honors. Have an MEP consulting background with over 2 years experience. Advanced in: AutoCAD, Solid Works, Excel, Visual Basic programming, Word, TRACE heatload and Matlab programming.

Electrical engineering major in power .

As Geosciences Engineer, 13 years of experience. Exploration and Production mines

Electronics and communication Engineer

GSM/CDMA Project Manager

Installation and commissioning, project management

Experienced & Seasoned Engineer

Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.

Total 13 years experience in Contract Administration, Quantity Survey, and Procurement functions of offshore oil and gas projects, onshore petrochemical and fertilizer projects representing both Consultant and Contractor.

I am a target oriented person with vast experience in Oil and Gas Construction Projects, I have experience in the safe Erection, Dismantling and Modifications of all Scaffolds in accordance with BS 5973 Standards, Inspection of scaffold materials and fall protection systems, documentation of scaffol

Contracts Manager

Civil Engineer with Project Control experience and knowledge of Primavera (P3)

A chemist with technical skills trainings in Industrial Process Controls, Advanced PLC, Hydaulic Industrial Controls, PLC, Electro-Pneumatics, Calibration for Process Instrumentation, Advanced Industrial Motor Controls, Pneumatic Industrial Controls & Industrial Electrician

Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic

Project maintenance manager/planner/trainer

9 years of extensive experience in Project Management, Planning and Execution involving fabrication, erection & commissioning of Piping & Equipments in Nuclear Facilities, Petrochemicals, Aluminum Smelter and Gold Mine Projects.

Project Manager, Telecommunication, Civil Engineer, Project Coordinator, Project Engineer, Supervisor

Seasoned Project Management professional with significant field experience in Civil construction projects including Quantity Surveying. Background includes successful execution of bridge & industrial building project. Solid leadership, teamwork and project management capabilities.

B.Tech-Mechanical Engineering, CSWIP-3.2 Senior Welding Inspector and LEAD Auditor-ISO 9000 having a 16 years experince in various levels in EPC projects ion Oil.GAS, Petrochemicals,Refinery and Pipeline in India, UAE,Nigeria, Saudi Arabia and Qatar.

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

AutoCAD, AutoDesk, CATIA V5, Pro E, SolidWorks, MatLab, MathCAD, Maple, MDesign, Ricardo Wave, GT Suite, Fluent, BasicStamp, C++, C+, PSpice, and basic Java programming „« Windows operating systems, Microsoft Office

Technically astute and versatile subsea project engineer with experience in FEED, detailed design, fabrication, installation, regulatory and pre-commissioning of subsea assets

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

Speak, write and read French, English and Arabic. Abilities to acquire new knowledge and skills quickly

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

I am working as an instrument technician in KSA through Al-Hugayet contracting Est. since January 2000. My job includes Installation, commissioning and Maintaining Process Control Instrumentation, associated with Oil, Petrochemical, Polymer, Packaging Lines with 10 years Experience.

Diploma in Mechanical Engineering

I am graduate and have a diploma of instrumention and process control with 9 years exp in diffrent industries

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

College graduate/entry level electrical engineer

Instrumentation, Automation, control & electrical engineer with 3 years experience

1991-2002 : Diploma in Building Services Engineering Place : Shah Alam Polytechnic CGPA : 2.85 out of 4.00 1997-1998 : SPM Place : Sekolah Menengah Teknik, Kuala Terengganu Grade : Grade 2, 31 Aggregate

Hull / fields/site engr. structural detailer have an experience in shipyard industries.

After having the highest level of exposure in Project Planning for the past Eight years in one of the fastest growing companies in Dubai. I am looking for a challenging and creative position that will set new standards in Project Planning. And to obtain a challenging position.

BE in Electrical and Electronic Engineer. Training in PSS/E Software. Able to perform Load flow analysis using PSS/E software and intepreat result.

Having 4 year exp. in automotive sector.

IT PROJECT MANAGEMENT

Well versed with ISO-9001:2000, ISO/TS-16949:2002 QMS, MS-OFFICE

Total 11 years of experience for Instrumentation and control related design and detail engineering activities for Petrochemical refineries, Ammonia Fertilizers, Cross country Pipelines, Offshore and onshore gas processing facilities and power projects.

Set-up, operate & maintain Document Control Area required for distribution, storage, retrieval & management of Vendor documents & dwgs, Proj. documents/drwgs; Electronic Document Management Systems Design, Operation & Maintenance; Supervision of Doc. Control Group & Precedures devt./implementation.

Graduate + Diploma in Materials Management, 12 Years exp., working as Purchaser in a Global Leading EPC Company in Qatar

After completing my Degree in Mechanical Engineering, I have worked in Diagnostician company providing NDT services on pipelines across Russia. Later I joined GAZPROM’s Subsidiary “Stroytransgaz” in Syria where 36”x319km Gas Pipeline Construction Project gave me a solid background in many QC aspects

GIS Expert (Esri & Geomedia)

Recent graduate with a Bachelors Degree in Mechanical Engineering looking for entry level position

I have a bacheors in engineering sciences, this is a relatively new discipline , which is essentially electronic engineering with a specialization in solid state physics and instrumentation

To obtain a full time job position in Mechanical Engineering ( Product Design engineering, Sales eng, HVAC, Analyst eng and Consulting)

Registered Architect (License No. 19900) since February 2005 issued by Professional Regulation Commission (PRC) of the Republic of the Philippines. Proficient in AutoCAD Program & MicroStation software. Familiar in using Autoplant 3D Structural, Microstation Geopak & 3D Studio Max.

Ingénieur en CVAC/ Mécanique du bâtiment et énergie

Control & Instrumentation Engineer with 5 years experience in erection, commissioning and maintenance of control systems and field instruments.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out