Resume - Capable to manage an organization for Electrical and Civil Engineering jobs.

Misco Jobs

Resume #79236

CONTACT INFORMATION:
View contact information...

Personal Data
Age: 41
Date of Birth: January 7, 1968 Citizenship: Filipino
Civil Status: Married Contact

Applying for: Site Electrical Manager

Work Experience

May 2007 – Present BUTEC
Qatar

Snr. Electrical Engineer

- Supervise staffs for QA/QC tasks i.e. material and other documents submittal as well as documentation for various site activities and progress reports for Kahramaa's Substation projects. Checking out materials specification. Construct methodology for Substation's Electrical and Civil jobs.
- In charge of cabling for 33 & 11kV underground cable circuits at Qatar-Shell Gas-to-Liquid project interconnecting Kahramaa 33kV switchgear and QSGTL 33/11kV Main Intake Substation as well as 11kV switchgear and Distribution 11/0.48kV Ring Main Units (RMU's). Launched and monitor testing and commissioning for cables and RMU's. Construct methodology for Electrical and Civil works i.e. installation of equipment in substation and trenching at critical locations respectively. In charge of QA/QC documentation for Electrical and Civil jobs. Coordinate with and assist Safety personnel for HSSE implementation on site. The job was being joint-stock with Siemens-AG since they supplied all Electrical equipment except cables.

April 2002 – Mar 2007 AL-ABDULRAHMAN TRADING & CONT. CO. (AARTCO) Dammam, Saudi Arabia

Electrical Engineer/Assistant Electrical Manager

- Perform AC & DC High Voltage & other Electrical tests on underground XLPE cables & overhead transmission lines as well as on GIS bus-bar. AC & DC HV test requirement for underground cables referred to SCECO-East Standard (SCS-P. 104.08) and IEC 60840.
- Monitor QA/QC activities on jobsite for HV & Fiber Optic underground cables installation
- for various SCECO & Saudi Aramco projects in Saudi Arabia as well as for Ministry of Electricity and Water in Bahrain.
- Supervise cable pulling in trench, substation basement, manhole, and tunnel.
- Design of 69kV underground cables including induced voltages and SVL sizing, calculation for concentric bonding cable sizing, and cable installation parameters for SCECO jobs.
- Construct methodology for cable installation and testing.
- Estimate bill of materials.
- Provide quotation for various sub-contract enquiries.
- Represent for job-explanation meeting and site survey for project bidding.
- Coordinate to other contractors as well as to the company/client for project interfaces.
- Dealing with the three parties i.e. client (Sceco), supplier (G & W / Raychem), and testing inspection (Moody Int'l) for Joints & Terminations supply.
- Conduct system planning and scheduling.
- Receive clearance for outage activities as well as work permit for various
SCECO jobs in substation.
- Perform fault-location on underground XLPE cables and supervise repair.
- Take over duties of Electrical Manager recurrently.

HV & ELECTRICAL TESTING

1)Progressive and final electrical tests on circuits of UG XLPE cables (up to 380kV system voltage / 2500mm² cu.) IE Impedance, Conductor & Shield Resistances, Capacitance, Insulation Resistance, Phasing verification,
Jacket test, Link-box contact & ground Resistances, SVL IR test, Cross-bonding verification, Radar Profile.
2)AC Hipot by resonance frequency on circuits of UG XLPE cables (up to 253kV in 230Kv system voltage / 2500mm² cu.).
3)AC Hipot by resonance frequency + Insulation resistance on GIS bus-bar (112kV in 69kV system voltage).
4)DC Hipot on circuits of UG XLPE cables (up to 228kV in 132kV system voltage).
5)Final electrical tests on circuits of OHL -
IE Continuity test & Conductor Resistance, Phasing & Insulation Resistance, Impedance.

TEST EQUIPMENT
1)Link-box Withstand Test o Wuhan Fanke 30kV AC (XC-0.15kVA / 0.30kV)
2)Impedance Test for phase to phase method o Multi-Amp Phase Angle Meter (model PAM-275)
o Fluke Multitester o Hioki Clampmeter for three-phase method o Multi-Amp Power Multimeter (model PMM-1) by AVO Int'l
3)Conductor, Shield & Contact Resistances o Micro-Ohmmeter (model M400) by AVO Int'l o SMC-PME 100 or PME-10
4)Earth Resistance o Megger DET5/4D
5)Jacket Test o Hipotronics (model 815PL)
o KMT Hagenuk T 99/1
6)Insulation Resistance o Megger BM11D
o Nieaf Instruments (model TeraOhm 5kV)
7)Radar Profile o Megger TDR2000
o Digital Cable Fault Locator (Model T433M or T433F) by BICC
8)Fault Location on underground XLPE cables o MagPie (Model T271) by BICC
o Digital Cable Fault Locator (Model T433M or T433F) by BICC
o Bridge (by Sumitomo Electric Industries, Ltd.)
9)DC HiPot o Hipotronics (model 8240PL), up to 300kV
10)AC HiPot o Wuhan Fanke (model CHXB-III) 300kV / 300Hz

Feb 1996 – March 2002 MANILA ELECTRIC COMPANY (MERALCO)
Manila, Philippines

Electrical Engineer
- Supervise construction of switchgear on Gas-Insulated & Air-Insulated substations as well as installation of other facilities, e.g. transformer, surge arrester, AC & DC distribution boards, control cables and cable trays
- Design of overhead primary (6.24kV to 115kV) and secondary (120/240V, 277/480V) line facilities including poles and transformers to serve:
-Commercial and industrial customers (three-phase and single-phase).
-Residential areas.
-Electrification in the rural areas.
- Supervise construction of overhead primary and secondary line facilities.
- Conduct progressive meeting with the contractors for system planning and scheduling.
- Check electrical plan from industrial and commercial customers and inspect load-side installation.
- Estimate bill of materials.
- Advice customer on low voltage cases.

Education

June 1989 – Oct 1995 Bachelor of Science in Electrical Engineering
FEATI UNIVERSITY, Manila, Philippines

Training & Seminars

Sept & Oct 1998 - Work Order Management System - MERALCO, Manila, Philippines
Jul 2002 - AC Hipot Testing Operation - AARTCO / Wu Fanke, Dammam, Saudi Arabia
Aug 2002 - Power Factor Correction & Harmonic Study- IIEE, Dammam, Saudi Arabia
Jun 2003 - Protective Relaying - IIEE, Dammam, Saudi Arabia
Apr 2004 - Power System - IIEE, Dammam, Saudi Arabia

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 3117)

Go to Search Parameters...

Brief Description

I have 15 yrs experience in construction supervision of roads and bridges (RCDG), concrete slope prot. works, RCBC and concrete retaining walls. Presently I am working in Saudi Arabia as Civil Engineer handling big highway proj. designed for asphalt pavement.

Sr Instrument Engineer with over 15 years experience in the design and specifications of instrumentation for petrochemical plants, and 2 years for offshore platforms

Structural/Geotechnical Engineering jobs such as Pile design, Retaining wall design and project management

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

I have 17 years of Planning experiences within oil and gas, petrochemical, mining, power plant and industrial plant construction. I am also an advance user of P3/P5/P6.

Project & Construction Manager

B.E. with 22 years of experience in Highways, Industrial and Building construction, out of which 3 years in Saudi Arabia. The experience includes-

I am a sri lankan working in oman -presently in the field building services as an engineer. Capable of designing - cold & hot water supply systems, sanitary plumbing stsems and fire fighting systems)

I have been in Truss deaign,layouts,and engineering for approx.36 years. I have experience in single family commercial,spealizing in multifamily design of beams, componets,floors and roof trusses

Total station operator

15 year of experience in the glass and aluminium industry

Application for the post of project manager/ section manager

Debasis is a geotechnical engineer and numerical modelling specialist within Scott Wilson’s Ground Engineering team. He is currently responsible for numerical modelling and geotechnical design input for tunnel linings, retaining structures and earthworks working on a variety of infrastructure sche

Professional individual having Soil Investigation, Soil Improvement, Diaphragm wall construction, Quay wall construction, Piling, Drilling Techniques (All Types) Geotechnical Special Testing, Material Testing, Geotechnical & structural Instrumentation & Geological Mapping skills.

Electric Engineer

B.Eng, Traffic and Transportation Planning and engineering, local area traffic management, transportation modelling, sidra, transyt, trips, bus transit, light rail route and station planning

Traffic Engineer with Master of Technology degree in Transportation Engineering. I have about 11 years of technical and project management experience in UAE, Qatar, India, Sudan and Saudi Arabia, in the area of traffic and transportation engineering/planning;

Advanced Certified Interconnect Designer. Trade Radio Technician. Diploma Electronics Eng. CID & CID+ Training. 17 years experience in both Comercial and Defence (Aus) Specialising In High Speed Digital, RF, Analogue and Video Board Design using Altium Software.

Piping design and gernal 3D model design using AutoCAD and CADWorx. Conduct reviews for Design Engineers and Field Engineers with Navis software. Direct drafters in preparation of drawings and plans. Coordinate drawings with other design agencies, fabrication and construction.

NDT level III, Senior certified welding inspector, experienced in most industries

Results oriented engineering professional with 20 years experience in project management, process engineering, and facility engineering

Directing Large Engineering Teams.

VERY GOOD EXPERIENCED IN CIVIL ENGINEERING AND CONSTRUCTION PROJECTS SUCH AS CONSTRUCTION OF BUILDINGS, ROADS, HOUSES AND HOSPITALS.

I am a railway track engineer past 25 years in INDIA, MALAYSIA,DUBAI METRO PROJECT.

Project Manager in Civil Engineering with 14 years experience. Excellant communication skills and able to work under pressure with minimum supervision.

Over 15 years of working experience in the construction projects on heavy civil works, roads, bridges, metro rail, building construction, petrochemical plants, industrial plants, multi – purpose irrigation system, commercial/ residential buildings, and knowledge in Engineering Tendering and Contrac

Power pant engineering

Above 14 years of worked experienced in Instrumentation and Electrical Control System overseas in a Reputable International Construction Companies. Supervision, Erection, QA/QC Inspection, Start-up, Commissioning and documentation works. Review Design and technical responsibilities for good quality,

I have Eleven years of experience in Architectural design development, planning & scheduling, DD & CD development for Architectural/Interior projects. I have experience on windows environment and worked on CAD Applications like ACAD, Revit implementation and management tools like MS Project, Primave

Qualification:Bachelor of Engineering(Civil),from Assam Engineering College,Experienced in design of RCC Bridges with Pile /Well foundation

Significant experience in electrical construction, commissioning, production and maintenance

I am applying for a position that suites my qualifications and experiences. Civil Engineer, who have high proficiency in Project Management, People Handling, Problem Identification and Definition, Problem Solving, which I acquired thru my long time exp

Capable to manage an organization for Electrical and Civil Engineering jobs.

A higly adaptable professional of proven ability with extensive on-site experience in worldwide locations who offers: construction and civil works expertise, safety and QA/QC awareness

Education from both China and United states major in transportation engineering and computer science. As a transportation engineer with more than 10 years¡¦ experience in both United States and China, his work extended from general transportation infrastructure design, transportation plan

Heavy civil construction skills. Concrete apllications and procedures. Sediment and erosion. Overhead and underground utilities construction. Heavy equipment operation. Regulatory laws pertaining to heavy construction.

Marine Surveyor

FOR THE POST OF QUANTITY SURVEYOR (BUILDING SECTOR)

Certified PMP having rich experience in EPC & construction management of Real Estate, Infrastructure and Petro-chemical Projects, Proficient in Primavera, MS Project and MS Office

B. Com. 16 years of experiences different construction materials such as soil, aggregates, concrete & asphalt laboratory & field test & Prepared test reports by using computer.

Land Surveyor , Autocad Tech.

Mr. Bipradas Rajbongshi is a specialist in the field of Geotechnical Engineering. He has 20 years experience in technical and managerial roles.

Over 13 years experience in positions including Project Engineer, Quality Control Engineer, Civil Engineer, Project Planner and Scheduler, Estimator, Crane Lift Supervisor, Welding Inspector, Land Surveyor and Draftsman. Nine years performance on U.S. Military Construction Programs

Piping Designer (HVAC Piping and Plumbing Systems)

Bitumen storage terminal construction and all bitumen products manufacturing expereince

Mechanical building services design engineer. Experience in design HVAC, Plumbing & Fire Fighting along with site supervision and project management activities.

Instrumentation technician with 20+ years of experience

Mechanical Designer with over 20 years experience preparing process piping layouts, hydraulic and pneumatic schematics, isometrics, assembly, P&ID’s, and detail drawings, as well as laying out the placement of mechanical equipment. Adept at performing field walkdowns, surveys, and meeting with clie

Electrical Engineer

Qualified Experienced Senior Construction Inspector

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out