Resume - E&I QC Inspector

Misco Jobs

Resume #80436

CONTACT INFORMATION:
View contact information...

C a r e e r O b j e c t i v e

To have the opportunity to utilize my acquired skills and knowledge in the field of Electrical Engineering.

E x p e r i e n c e P r o f i l e

Almost seven years of extensive experience in Construction, Maintenance and Project Management of Industrial facilities like Oil & Gas, Power Plant, Manufacturing Plant, Roads and Buildings. Hardworking person and willing to undergo training if needed. Can work under pressure and can work independently. Fast learner person and can easily adapt in new working environment.

* Ability to supervise and coordinate construction work teams and plan future work programs.
* Posses QA/QC Inspector experiences both on client and contractor side and familiar with ITP's and Method Statement; ensuring the installed works meet the specified requirements detailed in contract drawings and technical specification given by the client.
* Acquainted with the international codes and standards like National Electrical Code (NFPA70) and International Electrotechnical Commission (IEC); knowledgeable about the technical aspects of hazardous area electrical engineering such as basic design, area classification, gas grouping, temperature classification, ingress of protection and types of protection techniques.
* Know how to conduct Electrical and Instrumentation system procedures for pre-commissioning and commissioning.
* Can conduct instrument calibration procedures.
* Know how to interpret instrumentation symbols, diagrams and terminologies in P&ID.
* Capable to install different kinds of electrical and instrumentation equipment.
* Ability to terminate different kinds of cables in any equipment such as motors, panelboard, switchgear, electrical equipments, MCC, marshalling cabinet, instruments, and control valves.
* Capable of maintaining a safe and hazard free working environment in complete compliance to safety procedures and practices.

W o r k E x p e r i e n c e s

Company: Contract International Inc.
Position: Power Plant Engineer
Location: Kandahar Airfield / Kabul Military Training Camp
Operation and maintenance of Power Plant generated by Diesel driven Engine-Generator sets with Step-Up Transformer to 15 KV System
Inclusive Date: May 2008 ¡V June 2008

Company: Atlantic, Gulf & Pacific Company of Manila Inc. (AG&P)
Position: E & I Supervisor
Project Name: Re ¡V engineering of Compress Natural Gas (CNG) facilities in
Malampaya Onshore Gas Plant - Modification of piping, electrical and instrumentation system of Microbox and Boosternet to ensure compliance in Shell's technical specifications, including installation of fire water line, potable water line and Fire & Gas System.
Inclusive Date: May 2007 ¡V February 2008

Company: Saipem Contracting Nigeria Limited / Saibos - Dietsmann
Position: QA/QC Inspector (Electrical & Instrumentation)
Project Name: AMENAM / KPONO AMP2 Platform & Bridge and Existing
Facilities Upgrade - Lies within Nigeria offshore operates by Elf Petroleum Nigeria Ltd. (EPNL), consist of Production of Platform AMP2 (adjacent and bridge connected to the existing AMP1 platform) and upgrade of existing facilities in AMP1 platform.
Inclusive Date: September 2006 ¡V December 2006

Company: Parsons Brinckerhoff Philippines Inc.
Position: Electrical Engineer / QC Inspector
Projects Name: Philip Morris Greenfield Project - Construction and Installation of facilities for cigarettes production. (Main Production Building, Annex, Canteen Building, Security Center, Waste Water Treatment Building, Ingredient Storage Building, LPG Storage Area, Water Treatment Building, Diesel Storage Area, Central Plant Building, Diet Building)

North Luzon Expressway Project - Construction of 88 kilometers multi lanes and Buildings ( 9 units of Toll Supervision Bldg., 29 units of Toll Plaza, 18 units of Electrical Service Center Bldg., 20 units of Pumphouse Bldg., 5 units of Point of Sale Bldg., 1 unit of Operation and Management Center Bldg., 1 unit of District Bldg., Interchange Lighting, 33 kms of Roadway Lighting)
Inclusive Date: January 2003 ¡V July 2006

Company: Universal Robina Corporation (BOPP-Packaging Division)
Position: Production Operator
Location: JGSPC complex, Bo. Simlong, Batangas City
Inclusive Date: August 2002 ¡V January 2003

Company: Photocircuits Philippines Inc.
Position: Production Operator
Location: FPIP Sto. Tomas, Batangas
Inclusive Date: August 2000 - October 2001

Company: Sembawang Power Corporation ¡V MIESCOR
Position: PCD Engineer (Electrical/ I&C)
Project Name: Sta. Rita 1000MW Combined Cycle Gas Turbine Power Plant
Inclusive Date: June 1999 - January 2000

Company: Sembawang Power Corporation ¡V MIESCOR
Position: Instrument Fitter
Project Name: Sta. Rita 1000MW Combined Cycle Gas Turbine Power Plant
Inclusive Date: March 1999 - May 1999

Duties and Responsibilities ¡V Power Plant Engineer

„« Supervised team in reinstatement of 15KV line from Power Plant to 750 KVA Distributed Transformer via Pad Mounted Switchgear by splicing 3 core cables using Elastimold splicing kit.
„« Supervised reinstatement of Distribution Transformer ranging from 100KVA to 800 KVA by replacing damaged loadbreaks/deadbreaks, gauges, bayonet fuses, termination of 3 core cables and filling of oil.
„« Supervised Hi Pot testing and termination of 3 core cables.
„« Supervised Preventive Maintenance of Generators, Transformers, Switchgears, Pad Mounted Switchgears.
„« Maintain a job site file of maintenance performed.
„« Maintain a close liaison with contracting officer and keeping them informed of all phases of operation & maintenance.
„« Ensured the provision of a safe working environment.

Duties and Responsibilities - E&I Supervisor

„« Planned for the deployment and redeployment of resources for timely completion of work.
„« Supervised modification of electrical systems from ordinary installations to increased safety application technique: from ordinary cables and junction boxes to applicable cables and increased safety junction boxes.
„« Supervised installation of Fire and Gas System sensors and detectors, fire water line and potable water system.
„« Supervised fabrication and installation of conduits, tubing and its supports.
„« Supervised installation of different kind of valves and transmitters and its accessories.
„« Supervised pulling and termination of cables.
„« Supervised continuity & insulation resistance testing, hi pot testing, megger testing of cables and motor windings.
„« Represented the discipline for frequent review and update meetings with the client to attend to any concerns and also to give an update on the development of work as scheduled.
„« Supervised the team for timely and accurate work execution. Ensure that all the work activities get completed as per the quality norms and as per project specifications.
„« Responsible for determining appropriate supplies and stock levels are maintained to meet functional targets.
„« Coordinated with corporate engineering team to provide inputs on issues/ concerns as and they get raised by the client.
„« Coordinated with other engineering discipline heads at the project site to review the overall progress in work and coordinate with them to assess any hold points that originate from a particular engineering discipline.
„« Directly reporting to project manager regarding status of works.
„« Responsible for establishing, promoting and maintaining a safe and hazard free working environment in complete compliance to safety procedures and practices.

Duties and Responsibilities - E&I QC Inspector

„« Supervised / Inspect fabrication and installation of junction boxes ( Explosionproof & Increased Safety), conduits, supports and cable trays.
„« Supervised / Inspect pulling and termination of power and instrument cables to the equipment (MCC's, Switchgears, Motors, Instrument Marshalling Cabinet, Instruments, Junction Boxes).
„« Conducted Continuity and Insulation Resistance Test of cables of Fire and Gas System, Emergency Shutdown System, Deluge System, Power Generation and Distribution System.
„« Conducted Hi Pot Test of high voltage cables and Transformers.
„« Checked each instrument if it conforms to the required specification at the data sheet.
„« Checked the correctness of the installation of the instruments according to the specific installation drawings.
„« Supervised loop checking from process sensors to controllers, recorders and alarm units.
„« Supervised leak and hydro testing.
„« Prepared Permit to Work (Hot and Cold Work Permit) for each job.
„« Prepared necessary documents for Commissioning of the systems.
„« Coordinated and confirmed schedule and sequence of work with other trades.
„« Ensured the provision of a safe working environment

Duties and Responsibilities - Electrical Engineer

„« Supervised / Inspect fabrication and installation of junction boxes ( Explosionproof & Increased Safety), conduits, supports and cable trays.
„« Supervised / Inspect pulling and termination of power and instrument cables to the equipment (MCC's, Transformers, Switchgears, Motors, Marshalling Cabinet, Automatic Transfer Switch, Instruments, Junction Boxes).
„« Conducted / Witnessed Continuity and Insulation Resistance Test of cables.
„« Conducted / Witnessed Hi Pot Test of high voltage cables and Transformers.
„« Supervised/ Inspect installation of Grounding and Lightning Protection System.
„« Conducted / Witnessed Continuity and Earth Resistance Test of Grounding and Lightning Protection System.
„« Supervised/ Inspect installation of equipment according to the manufacturer's recommendation, technical specification, drawings, National Electrical Code (NEC), International Electro technical Commission (IEC).
„« Generation and Closing Out of Punchlist and Non Conformance Report (NCR)
„« Testing and Commissioning of the System (Lighting and Power, ACID, FDAS, FCMS, CCTV, UPS, Generator, Structured Cabling System, FM 200 Fire Suppression System and Intercom).
„« Reviewed the drawing submitted by the contractors.
„« Prepared daily accomplishment and monthly reports.
„« Coordinated and confirmed schedule and sequence of work with other trades.
„« Prepared and secured necessary working permit before actual start of work
„« Directly reported to the MEPF Manager regarding status of works.
„« Ensured the provision of a safe working environment.

Duties and Responsibilities - Project Control Division (Monitoring Engineer)

„« Reviewed manpower loading & scope of work.
„« Reviewed drawing, schedule, bill of quantity, and progress report.
„« Prepared daily accomplishment report, weekly report, and monthly billing.
„« In - charged of material take-off and costing of extra works.
„« Coordinated with the main contractor regarding time sheets for billing.
„« Coordinated with the supervisor, field engineer, and foreman in monitoring status of work.
„« Ensured the provision of a safe working environment.

Duties and Responsibilities - Instrument Fitter

„« Took off material with P&ID, location drawing, hook-up detail drawing and instrument list.
„« Installed pressure gauges, transducers, temperature elements, indicators, level gauges and switches.
„« Installed impulse tubing, process connection, capillary tubing, heat tracing and airline connection.
„« Performed instrument calibration procedures.
„« Ensured the provision of a safe working environment.

Duties and Responsibilities - Production Operator

„« Effective operation by monitoring the status, performance and behavior of the machine and ensuring the safety of the operator and the high quality of product produced.
„« Set parameters to computer that is within the standard specifications.
„« Completed assigned task following manufacturing and/or support process.
„« Notified supervisor of problems or changes in process employed.
„« Monitored process performance to ensure process and product attributes meet or exceed internal and external goals or specifications.
„« Maintained clean and orderly job areas.
„« Ensured provision of a safe working environment.

T r a i n i n g

Supervisory Training Seminar
Atlantic, Gulf & Pacific Company of Manila, Inc.
July 9 & 10, 2007

Basic Offshore Safety Induction and Emergency Training (BOSIET)
International Development and Environmental Shipping School
Subic Bay Freeport Zone, Philippines
July 23, 2006 to July 25, 2006

Advanced Instrumentation and Process Control(AIPC)
UP INSTITUTE FOR SMALL-SCALE INDUSTRIES
University of the Philippines Diliman, Quezon City
March 23, 2002 to April 27, 2002

Industrial Instrumentation Training Course
TESDA REGION IV/ I&E INDUSTRIAL SYSTEM SERVICES, INC.
Batangas City
April 21, 2001 to June 17, 2001

On-the-Job Training/Internship
PILIPINAS SHELL PETROLEUM CORPORATION
Tabangao, Batangas City
Instrument/Electrical Section
April 21, 1997 to June 13, 1997

Production Operator Trainee
PHOTOCIRCUITS CORPORATION
Glen Cove, New York 11542
October 2, 2000 to February 5, 2001

E d u c a t i o n a l A t t a i n m e n t

Graduated with a Degree of BACHELOR OF SCIENCE IN ELECTRICAL ENGINEERING in Batangas State University (formerly Pablo Borbon Memorial Institute of Technology ) April 1998.

G o v e r n me n t E x a m i n a t i o n T a k e n

Registered Electrical Engineer-Passed
MLQU, Manila
October 3 ¡V 5, 1998
REE No. 0018359

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 3118)

Go to Search Parameters...

Brief Description

Licensed professional engineer with multi-million dollar construction projects experience. Fully trilingual - fluent in English, Spanish & French. Highly proficient with AutoCAD, GIS, SewerCAD, MS Project, Primavera and Microsoft Office.

Professional EHS Manager

Over 25 years Quality Management Supervision experience in the Oil & Gas and Heavy Engineering construction.

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

I'm a recent graduate in Metallurgical Engineering and have an extensive Internship experience in the Oil and Gas Industry.

Excellent experience, coupled with a strong quantitative and analytical background, makes me an excellent candidate

Electronics/Instrumentation Technician Specialist

Quantity surveyor, estimation and land surveying works

Project Controls Cost Engineer / Analyst (EVMS, Change Management, Cost Forecasting Planning and Budgeting)

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

Have vast experience in sales,construction,contract bus service provider company,timber industry and presently with working with real estate and builder

Geologist with good expertise in planning, follow-up and reporting of geotechnical and geophysical site-/soil-investigations.

Very experienced explosives engineer, with account and man management experience. Former regional manager of the UK,s foremost explosives supplier. Experienced in mining and construction projects.

To contribute strong background in project management, civil engineering, contracts and along with unique drive for excellence and success to your firm in a Planning & Control Engineer position.

Mechanical Engineer with 8 yrs experience in Material Management/MATERIAL CONTROLLER/MATERIAL COORDINATOR

Civil engineer having knowlegde and working exposure of AutoCad 2000 and Staad 2004

Construction Project Manager, Property Development Manager

Olympic Ice Skating Rink, Muliti-storey, Apartments, Precast Panels, Site Retention, Post Tensioned slabs, Structural Steel,

Self-motivated Draftsman proficient in AutoCAD and manual drafting with 750 hours of theory and 750 hours of hands on experience. Eager to contribute time and effort to benefit a respectable company. Responsible, hardworking and dependable.

To obtain a challenging position that utilizes proven experience and skills.

Excellent interpersonal, oral and written communication skills, Good computer skills (MS-Word, MS-Excel, MS-Power Point, MS-Access, Oracle etc.). Excellent knowledge and Training on ISO 9001, ISO 14001, OSHA and OHSAS 18001. Master degree, Diploma in Safety, Training on HSE.

A dedicated team player with excellent problem-solving skills. Valuable mechanical engineering experience in a variety of work environments: fabrication, project management, design in high tech, aerospace, automobile and offshore industries, cost control, QA/QC. AutoCAD, SACS, Inventor, Solid Edge

Primavera Experience

11 years of experience in the Oil & Gas, Carried out various endeavours including feasibility study, basic engineering, detailed engineering, construction engineering and the supervision of yard construction and offshore installation.

Have certificate in Mechanical Engineering drafting with 12years experience in handling Autocad programme. currently based in Riyadh, KSA and handling drawing for Architectural, C&S & MEP.

I have completed B.E,(Electrical & Electronics Engg) in may 2006 with 70% as the aggregate from Anna University(Kamban engg College) India.Having 2 years experience in transformer manufacture, Being given to understand that you are entertaining candidates for various positions

B.E. / 24Yrs / REC, Motilal Nehru, Allahabad. Work Experience: Projects/ Construction/ Consultancy/ Planning – 10yrs. Maintenance/ Planning/ ISO 9000 Implementation – 12yrs. Trainer / Q A & Q C /Turnover Documentation – 2yrs.

B.E. (Mechanical) with Piping Engineering from Indian Institute Of Technology, Mumbai.

Good in AutoCad, 6 years experince in 4 shipyards with main activity shipbuilding and repairing, youg, able to lear and fast adapting in diferent conditions.

Telecommunications Engineer, with Bsc. In Telecommunications and Electronics, present occupation on Telecommunications Network Resource Management, Planning & Design Telecommunication Circuits Serving Electrical Networks. Consultant Engineer: Alarabi Engineering Consultants.

Senior Electrical Engineer with over 20 years of manufacturing, industrial, chemical, and power plant field experience.

Industrial automation with specilisation in RTU, PLC, Testing and commissioning of MCC, PCPwith sound knowledge on embeddedsystem, RTOS-VX WORKS

Educated to a high level with well developed interpersonal skills. A proactive, result orientated style of working, is supported by a broad range of practical skills and knowledge. A keen sense of self worth and ambition are tempered by a proven ability to achieve within a professional environment.

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

E&I QC Inspector

MEP Consultant, Space Planning for all Mechanical Services,Specialised in HVAC & Fir Fighting Services,Skilled with Cooling Load Calculating Softwares.Lead or o-ordinate the Team is easiser.

Building Seismic Design , Evaluation of Structures, Bridge Design

Integrated Buidling Systems Manager, Project Manager, IT Manager, CMMS

Rotating Equipment Engineer with 9 yr Experience

I am an engineer holding a university degree (B.Sc) in electrical engineering Aden - Yemen, I have 8 years experience, 5 years in electrical & electronics maintenance and 4 years experience in a Company in Saudi Arabia has Industrial agencies responsible of after sales services

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

13 Years with Onshore & Off shore, OIL & GAS refinery & Shutdown .

Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.

I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro

Civil engineer, Project Manager, contract Manager

Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.

For the past 11 (Eleven) years of my working experience as Equipment Site Supervisor/ QC Inspector/QC Supervisor, I had gained experience & Knowledge on Quality Awareness. Performing Hold, Witness & Surveillance inspections based on standard requirements and other related presentations

Project Management. Scheduling, Ms.Project, Primavera, Budgetting. Engineering. QS, AUTOCAD, Structure Analysis, SAP2000, Site Engineer.

Highly skilled engineering and construction management professional.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out