Resume - I have 29 years of management and engineering experience. Excellent references ...

Misco Jobs

Resume #80754

CONTACT INFORMATION:
View contact information...

SUMMARY

I currently manage the technical operations of southern Indiana and former SusCom systems for Comcast. My cable career started on January 30, 1980 and I was promoted rapidly due to my dedicated service and strong electronics background. I have used a computer since the late 1970's and proficient in most software programs.

CAREER GOALS

To learn and implement new technologies as they become available through formal and hands-on training, manage my departments in an efficient and effective manner, assist all departments and continue to advance in my career.

EXPERIENCE

Jones Intercable, Olney, Illinois 1980 - 1981
Temporary Installer
My position was created by the introduction of block cable converters and the addition of Olney's first pay channel, Showtime. I performed all technical duties in the Olney system. Status was Temporary.
* Worked as Installer, Technician.

Jones Intercable, Olney, Illinois 1981 - 1984
Installer/Technician
I performed all installer and technical functions. For a short period of time, I was the only Installer/Technician in the system. I also performed rebuild and headend maintenance. I started the NCTI Chief Technician Course in 1983 using payroll deduction. I was allowed to combine all NCTI courses into one due to my strong background in electronics. Susquehanna Communications acquired the system in February of 1984.

Susquehanna Communications, Midwest 1984 - 1996
Regional Engineer
Responsibilities included overseeing all technical operations in the Midwest systems. I was interviewed and selected by the corporate V.P. of Engineering.
* In 1988, I was involved in the acquisition of the Mississippi systems before and after the closing. I inspected, recommended and submitted the requests for additional capital to bring the system and headend up to 450 MHz. This included calculating end-of-line performance numbers and the selection of modifications.
* My family and I transferred to Shelbyville, Indiana in 1990 to accept additional responsibilities of Plant Manager.
* In 1993, I wrote the procedures and implemented computer software to automate the Midwest systems Proof-of Performance testing. A system could be completed in one day, with exception of the 24 hour tests. This was used in all Midwest systems and was being considered to be implemented on a corporate basis. Tektronix showed interest in implementing it in their software.
* Instructed technical mangers during corporate technical meetings.
* Designed the system rebuild in Olney, Illinois.
* Nominated by the previous Corporate V.P. of Engineering to be his replacement after his retirement.

SusCom, Shelbyville, Indiana 1996 - 2003
System Manager
Responsibilities included overseeing of local marketing, preparing and monitoring of capital and operating budgets and day to day system operations.
* System was recognized by the NCTA for the successful launch of the first cable modems in the State of Indiana with connection to the Internet. System was the second system in the country to have more than one ISP using cable modems and the first to have more than two ISPs.
* System received the Excellence in Customer Service Award from the local Chamber of Commerce.
* Shelbyville had the highest OCF within the SusCom systems on a percentage basis from 1996 through 1999.
* Shelbyville received an award for Outstanding Operating Performance & System of the Year Award under my management for 1996.
* Designed and published Susquehanna's first web page.
* Designed and supervised the construction and transfer of the Shelbyville headend.
* Designed and monitored the Shelbyville system's rebuild from 245 MHz. to 550 MHz.
* Member of a corporate technical task force with the responsibility of designing and implementing the methods of training technical personnel.
* Negotiated franchise agreements with local authorities.
* Negotiated retransmission agreements with local broadcasters.
* Designed and implemented the fiber for lease to the local city/county fiber board.
* Negotiated the original agreements with 3 local ISPs to provide Internet connection using cable modem technology.
* Designed and determined methods of system two way activation.
* Negotiated and implemented the contract for Major Hospital's private WAN by connecting 3 remote sites using dark fiber optic cable.

SusCom - Midwest 2003 – 5/2006
Director of Technical Operations
Responsibilities include overseeing all technical aspects of the Midwest systems in addition to the system operations of the Shelbyville system. The systems were acquired by Comcast in May of 2006.
* I was offered a promotion to General Manager of the Midwest in 1999 by the President of Operations. Unfortunately, I declined due to the loss of my spouse's income and benefits would result in a negative impact on my family cash flow. The position required relocating to DuQuoin, Illinois. The System Manager position was eliminated.

Comcast
Manager of Engineering 5/2006 – 8/2006
Responsibilities included management of the engineering department for the former midwest SusCom and Comcast southern Indiana systems. Position was changed due to a transfer of the Manager of Technical Operations of the southern Indiana systems.

Comcast 8/2006 – 3/2009
Manager of Technical Operations
Responsibilities included technical operations management of the former SusCom and southern Indiana systems. This position is being eliminated.
EDUCATION

Western High School, Las Vegas, Nevada 1975
Classes included Electronics, TV Production, Algebra, Geometry, Advanced Algebra and Trigonometry.

Olney Central College, Olney, Illinois 1979
I attended night classes in electricity and advanced college math courses.

Wabash Valley College, Mt. Carmel, Illinois 1979
I started in Telephony and changed to Electronic Technology after the first semester due to the loss of the instructor and the desire for more advanced electronic courses. Courses included electronic math, physics, business law, electronics and general studies.

Chief Technician Course - National Cable Television Institute, Boulder, CO. 1985
This was a two year course involving all aspects of the CATV system including electronic theory, amplifier and headend equipment components. I was allowed to combine all available NCTI courses into a two year program.

LICENSES
* Marine Radio Operator Permit (MP) – Federal Communications Commission, Washington, D.C. Exam consisted of Element I of the FCC Commercial License Exams. Exam taken on 12/28/2005 with a score of 96% on first attempt.
* General Radiotelephone License (PG) with Ship Radar Endorsement - Federal Communications Commission, Washington, D.C. The Commercial FCC License Exams included Element III and Element VIII with scores of 97% and 98% respectively on first attempt. Exams were taken on 12/28/2005. Elements I and III are required for the PG License. Elements I, III and VIII are required for the Ship Radar Endorsement.
* GMDSS Radio Maintainer's License (DM) with Ship Radar Endorsement – Federal Communications Commission, Washington, D.C. Exam consisted of Element IX of the FCC Commercial License Exams. Exam taken on 11/25/2008 with a score of 100% on first attempt. Successful testing of elements I, III and IX are required for the DM license.

CERTIFICATES/TRAINING
* Certificate - Magnavox, Chicago, IL, 1983. CATV Seminar
* Certificate - C-Cor, Chicago, IL, 1985. CATV Seminar
* Certificate – CATV Systems - Texscan, Indianapolis, IN, 1986. CATV System Seminar
* Certificate - Headend, Earth Stations and Distribution - Scientific-Atlanta, 1989
* Certificate of Achievement - CATV Technical Training Institute - General Instrument - 1986
* Certificate - Cable TV Measurements - Tektronix, St. Louis, MO., 1993. Course involved training in all FCC Proof-of-Performance measurement testing. Instructor had similar procedure except he used Excel and I used Lotus 123.
* Certificate - Forum for Mid-Level Managers - Susquehanna Pfaltzgraff, York, PA, 1996. Course involved management training and procedures.
* Certificate - Fundamentals of Cisco Router Configuration - Cisco, Indianapolis, Indiana, 1999
* Certificate - HITS Headend Operations - Motorola, Hatboro, PA, 2000. Seminar involved training for installation and maintenance of HITS digital service related equipment.
* Certificate - Introduction to Cisco Cable Routers - Cisco, San Jose, CA., 2000. Seminar involved hands on training on the Cisco CMTS.
* Certificate of Completion - C-Cor, Shelbyville, IN, 2001. Course involved setup and maintenance procedures for C-Cor distribution products.

Excellent References available upon request

ACTIVITIES AND INTERESTS

Smarthome
I'm developing a computerized smart home with the focus on energy and water conservation, security and personal convenience. The processor controls household lighting, the HVAC system, humidity, air purification, windows, attic fans, irrigation system, security system, etc. The home may be manually controlled and monitored from any location using a computer, a PDA with an Internet connection or by a telephone using POTS. This processor is connected to a weather station via a server for constant weather data.

Video Production
During the early 1990's, I owned and operated a video production business. This included running the cable LO channel using the cable system return from my living room and the character generator function Productions included wedding, training and industrial video productions. Equipment included cameras, microphones, NewTek Video Toaster, computers and Panasonic S-VHS professional editing decks.

Software Beta Tester
I was involved in Beta testing SYS home automation software that was developed by Premise Systems and later sold to Motorola. I have read that this software may be implemented into future home gateways.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 3092)

Go to Search Parameters...

Brief Description

Skills Summary : • Installation of Windows & Split Air-conditioning Units; Servicing, Preventive & proactive maintenance of AC & refrigerators. • Welding of copper pipe joints & fixtures. • Checking Voltage & Amperes of Cooling Units using Clamp-Meter. • Gas charging of all cooling units. Cooling U

Responsible for Civil / Structural works of assigned Projects for both Oil & Gas Industry and Commercial/Residential or Mixed Used Projects.

Project manager

Civil engineering experience. Highly qualified in troubleshooting and problem solving skills in the field of construction and management

17 years experienced engineer

More than 22 years (16 years in India and 6 years in Saudi Arabia) in Electrical Power/Substation/ Managerial/ Electro-Mechanical /Petrochemical/ Geographical Information System (GIS), fields.

In Geotechnics I ensured the supervision, the control and the establishment of design reports for several geotechnical investigations of large civil structures in soft and hard grounds : special foundations, retaining structures, soil improvement and reinforcement by geosynthetics' products,

I have 29 years of management and engineering experience. Excellent references available.

CAD and IT Administration and Development

Geotechnical skills , transportation skills, autocad and any other thing that a fresh civil engineer is expected to be knowing .

Computer skills are MS Word, Microsoft excel, MS Power point, GIS, AutoCAD 2002, 2004, 2006, NMax v6.50, Windows Movie Maker, 3D Home architect, Photo Studio 2000, & Cyberlink Power Director. I can also oper8 instruments such as Nikon DTM-332 Series Total Stn., GPS( Sokkia, Leica, Epoch 10, Etrex)

position as an MEP Design management, Sustainable Design, LEED Facilitation, Building Commissioning, and Building Energy Modeling for High Performance Buildings.

30 years experience in civil and horizontal projects

all types of welding, vessel, tanks, erection and fabrication, piping and structure, all solutuions of welding requirements,

Havin total 30 yrs experience out of which 20 yrs in all types of cranes-and 6 yrs in Bulk material handling field like stackers/Reclaimers etc.

Detail-focused and culturally-sensitive professional offering more than 20 years of increasingly-responsible experience. Track record of completing complex projects on time and under strict budgetary guidelines without sacrifice to overall project quality

Civil Structural Design Engineer with over 6 years of experience in the field of Design, Finite Element Analysis, Stress Analysis. Currently working on fast track multimillion dollar, complicate & intricate International construction projects in a contracting company in Dubai, U.A.E.

Senior Marine Facilities Engineer, Highest qualification: B.Sc (Eng) Civil, University of Cape Town, 1989, Overall working experience 16years, specializing in Marine Terminals, Harbor and Coastal Structures, Oil & Gas Development and Port Infrastructure Projects.

QS/Cost Engineer with 10 years of Experience in Construction Industry

PMP Certified Civil Engineer with MBA(Marketing & Systems) with about 7 years experience in the Middle east

Interior designer-Architectural presentation artist

Highway Design, Pavement Design, Economic and Financial Analysis

I am well qualified engineer, have strong administrative abilities, and also possess sound background as Quality Control Consultant. I would like to work with a company that provides strong career building opportunities as well as helps to enhance my engineering/administrative abilities.

Having Gulf experience and 10 years long employment in contract preparation & negotiation, tendering & award procedures. Conversant with FIDIC and INCOTERMS.An certified ISO Internal Auditor.

I am currently seeking a challenging position within the architecture and engineering fields as an assistant project manager or drafter. I have gained a wealth of experience with my current employer in the design of telecommunication sites as well as a fundamental knowledge of civil site design.

PhD, CFD, Fortran, Matlab, C++, Fluent, Gambit, Tecplot, AutoCAD, ArcGIS

I am presently working as Manager - Operations (Process) with IndianOil Petronas for their 6.0 lakh TPA LPG Import/Export Terminal at Haldia, India. I have over 20 years of experience in the construction, commissioning & operations of LPG Filling Plants & Cryogenic LPG Terminals.

CA licensed geologist (CEG&RG). More than 24 years of professional experience in engineering geology and environmental consulting in CA & HI, including 16 years as supervisor/owner. Currently self-employed with own environmental consulting firm in HI since 1992. Relocating to AZ (Tucson or Phoenix)

Post graduation in tool desiogn esp. in the field of sheel metal working ie. press tools, plastic moulding, have tge good knowledge of catia-v5, pro-e, autocad, ansys software

BE Civil

COMPUTER LITERATE, EXCELLENT DECISION MAKING SKILL, FINAL YEAR BSc OSHE

Experienced in autocad ,microstation and manual drafting. 32 years in civil and structural design

PIPING DESIGNER/DRAFTSMAN(PDS/PELICONFORGE/SPR/CAD/MICRSTATION)

MSc of Engineering Science, East Ukrainian University – Ukraine (1998),  BSc Instrument & Control Engineering, East Ukrainian University – Ukraine (1997)

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Search for job in car or food industry.

Searching for a position within the Construction & Civil/Structural Engineering profession, in a progressive employer that provides career growth and excellent advancement opportunities.

I’m a Computer Aided Drafter/Designer with 15 yrs experience in various fields. I use AutoCAD up to version 2002, IDEAs SDRC v. 7-9. I’ve worked some with MicroStation and AutoDesk Inventor. I am looking to relocate to Virginia or Pennsylvania Reading area.

I want to relocate to USA/UK/CAnada,hence need an employer who can hire me and sponsor me for visa.

I have a total of nearly 13 years experience drafting, with about 9 of those years in the home building business. I also have 5 years in Coil Production (AC, Steam, Condenser, & Air Handlers) I have developed custom designs for previous companies specifically tailored to the customers needs. I have

I have diploma in Surveying and 4 years exp in High rising Bulidings. I can operate all kind of Survey instruments

Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.

Piping detail, scheduling, field work and design in refineries, chem plants offshore prouction platforms, onshore and offshore oil drilling rigs sugar mills using acad,( short term cadworx,rebis, smartplant) and on the board

LAND SURVEYOR

Seventeen years experience in electrical engineering design, construction supervision, commissioning & start-up for major international EPC and Consulting firms specialized in power generation, T & D grids, oil and gas petrochemical fields

Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.

Design engineer

25+ yrs progressive exp. as a Sr. Supervisory Planning/Scheduling & Project Control Engr/Mngr with Risk/Contracts Exp, Int'l w/Utilities, EPC Firms/Consultants, Turnkey OEMs and Constructors within the Energy Sector. P3 Ver.3.1, Primavera P3e/cVer.5, 6.2,Pertmaster, Claim Digger, MS Office, Acrobat

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen.

The majority of my 15 years of experience has been applied to inspecting in-service pressure equipment and piping in a refinery setting. I am an excellent communicator with exceptional organizational skills geared toward inspection, NDE planning and crew leadership.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out