Resume - Acquire 17 years of experience as Mechanical Construction Field Engineer in Oil ...

Misco Jobs

Resume #80993

CONTACT INFORMATION:
View contact information...

EXPERIENCE SUMMARY / CAREER SYNOPSIS:

Acquire 17 years of experience as Mechanical Construction Field Engineer in Oil & Gas (Upstream & Downstream), Oil Tanking Plant, Chemical & Petrochemical and Pharmaceutical projects. Experienced in Planning, Organizing & field monitoring activities related to Piping and Equipment (Rotary & Static) fabrication, installation & commissioning. Implemented construction specifications related to fabrication and erection of mechanical equipment and piping. Umpired bench marking, labor productivity, field rework and workface planning to improve construction performance. Developed & mapped out spreadsheet to maintain safety data & produced detailed reports. Gained quick decision making and problem solving skills related to equipment & piping installation on day-to-day basis. Analyzed require tools and strategies to ensure the timely completion of project while managing project costs. Acted as liaison between clients & sub contractor the defining, sequencing and duration estimating of activities, the developing and control of schedules and resource planning, as well as estimating, budgeting and controlling costs.

CAREER SUMMARY / COMPETENCIES:

* Instrumental in the process of organizing and delivering all elements necessary, before work started, to enable craft persons to perform quality work in safe, effective and efficient manner
* Recommendations accepted by client that the workface planning should be like "system driven commissioning & start up, commissioning & start up driven construction and construction driven engineering & procurement" i.e. "plan forward sequence backward" and promoted to senior field mechanical engineer
* Briefed reports and forecasts including summery of construction progress, job manpower and expenditure forecast. Attended field mobilization kick off meeting
* Prepared mechanical completion punch list (as per API 686), field change notices, extra work orders and back charge notices, field bulk material purchase requisition including material take offs
* Initiated to change the plate type heat exchangers, analyzed not patterned for slurry service, and tackled product cooling problem by explored 'chilled water cooling coil' oriented inside the slurry vessel, which amounting a total saving of couple of million dollars
* Coordinated CWP (construction work package) into FIWP (field installation work package) and established work face planning approach, rules & infrastructures
* Created workforce plan in terms of goal, workforce planning infrastructure, FIWP requirement being with the end in mind
* Identified challenge, current planning approach, problem with current planning approach, labor productivity, foreman frustrations and maximum spent time by a foreman per day
* Earned strong P&ID and mechanical drawing development skill including piping GA & isometric as per field construction requirement
* Broadened knowledge regarding reading of design drawing (equipment & piping) and created piping GA & Isometric drawing immediately standing at site
* Executed & commissioned 90M3 refinery tank farm including pumps & 32" pipelines about 10km. in length. Also Executed & commissioned oil storage terminal & pump house
* Studied with welding RT, LT, UT and heat treatment process
* Gained knowledge regarding ASME Sec.VIII Div.1 & Div2, PD5500, API 650, 620, 12D, 12F, 12P, UL142, ASME B16.5 and B16.47 code requirements.
* Well educated with the project specification requirements of various oil companies such as Saudi Aramco, Petro Canada etc.
* Reviewed bid, contract document and switchover plan; negotiated scope of work with contractors and participated in area constructability reviews
* Judged manpower requirements for field construction operation for piping and equipment erection and provided input to scheduler
* Gathered knowledge about Construction Association of Alberta's logistics. Formulated construction methods, procedures and work force planning.(to ensure contractor's tools, labors & material allocation is adequate or not)
* Implemented & managed Tailgate & Toolbox safety meeting including Ladder safety, Power tool safety, Positive attitude and distractions on the job and hazard analysis
* Revamped packaged equipments like high speed pusher centrifuge (centrifugal and reciprocating motion at the same time), chiller package, agitator and dispenser
* Trained with Compress Package (Pressure vessel design software)
* Qualified preparing RFI, TBE and RFP packages in design office

EMPLOYMENT DETAIL AND RESPONSIBILITIES:

Since 2006
SNC Lavalin Inc. Calgary, Canada
Position: Mechanical Project Coordinator

Project Handled

-Petro Canada Fort Hills Project, Froth Treatment Plant 230,000 BPD

* Authorized for preparing Business Data Package, a special requirement from PCOSI (Petro Canada), related to 'capital equipment history' documentation
* Analyzing overall mechanical engineering progress
* Performing schedule monitoring and updating of construction network schedule and 3 month look-ahead schedules
* Composing schedule deviations and proposing corrective action/work around solutions
* Perticipating in additional assignment per lead's instruction regarding FIWP (field installation work package)
* Evaluating & implementing labor productivity, foremen frustations, maximum spent time by a foremen, work force planning, work face planning approach and work face planning rules
* The project coordination engineer's role also required me to direct project specific activities within PCOSI's own document control department to ensure the timely review and transmittal of sub-contractors deliverables
* Highlighting SPDP (Spare Part Data Package) and start up / commissioning spare parts requirements
* Guiding vendor for submitting of start up / commissioning spare parts documents as per client's requirement

-Cabruta Refinery Project, Venezuela 442,000BPSD

* Generated mechanical design criteria in DBM stage
* Developed procedures for pre-commissioning, commissioning of equipments, pipelines and their associated facilities, air blowing, hydrostatic pressure test and purging etc
* Systematized co-ordination between site engineering and related H.O engineering dept, in order to achieve the scheduled delivery of engineering documentation to sub-contractors. Also navigated for resolution of site generated technical queries
* Compared of inquiry package documentation and assessment of tenders prior to contract award
* Netted process piping systems ranging from 0.5" to 36" diameter. Logged site generated technical queries and initiated field modifications requirement.

-Saudi Arabian Oil Company (Saudi Aramco), Gas Oil Separation Plant (GOSP) -250MBCD

* Edited overall engineering progress planning against deliverable list
* Facilitated equipment delivery to meet Level IV schedule
* Formulated ETA report (expediting report) vs. CPN report (commitment package)
* Projected FAT (Factory Acceptance Test) and witnessed / hold point schedule
* Published Monthly & weekly report

-Saudi Arabian Oil Company (Saudi Aramco), Water Injection Pump Stations (WIPS)

* Streamlined overall mechanical engineering progress and verified other discipline's engineering progress to meet CWP schedule
* Pursued RFQ (requisition for queries) packages for tanks, pressure vessels, chemical dosing packages, overhead cranes and emergency diesel generator
* Handled TBE (technical bid evaluation) and RFP (requisition for purchase) packages and magnified bid clarification questions to answer by vendor

2005-2006
Kiewit Energy Corporation Inc. Calgary, Alberta, Canada
Position: Mechanical EPC Coordinator

Project Handled

-Meg Energy, Canada- Cristina Lake SAG-D Project, Cristina Lake, Alberta, Canada

* Dealt report of 30%, 60% and 90% model review, progress EWP (engineering work package) and vendor module package delivery
* Surveyed critical equipment delivery period based on schedule IV planning with procurement group
* Executed planning & scheduling, preparation of material indents, reports & invoices
* Fashioned erection scheme's for various equipment & piping. Maintained QC check sheets for all rotary & Static equipment. Launched various pre-commissioning activities as per API 686
* Helped preparing estimation of different rotary equipments including compressor
* Joined in discuss with client and sub-vendors at the time of static equipment shop fabrication

2000-2005
Mott Mcdonald Engineering Consultancy, Mumbai, India
Position: Senior Field Mechanical Engineer

Project Handled

-Zuari Oil Tanking Ltd, Goa, India

* Chaired hooking up cooling water, 125psi compressed air and 10 bar steam pipe line in to existing plant
* Fostered piping isometrics to as-built drawing
* Furnished emergency generator package
* Introduced copper tube steam tracing in place of EHT (electrical heat tracing) and saved significant amount of cost
* Observed erection and commissioning of 100 km. unit piping (for different services). Personally conducted hydraulic testing & under-soil pneumatic testing and monitored repeated flushing, filter cleaning and post commissioning ultrasonic test
* Modified pump house equipment orientation and pipe sizing in the basis of existing data package

-Mathura Oil Refinery, Delhi, India

* Constructed and commissioned of $150m IOCL Refinery expansion project
* Verbalized major vendors and consultants deliverable
* Created project-specific management information system on material flow, actual-vs.-budget man-hours and schedule-vs.-progress monitoring system
* Assisted in preparation of estimates for different static equipments
* Fabricated, installed and commissioned HP, MP & LP steam pipe by incorporated target plate inside the line to identify the amount of particles

-Sandoz Ltd., Oral Solid Dozes Pharmaceutical Plant, Mumbai, India

* Constructed & commissioned of $80m Pharmaceutical Plant
* Upgraded blister packing machine capacity by incorporating smaller conveyor
* Remodeled reverse Osmosis unit main circulation pump SS casing by poly propylene casing to reduce water hardness
* Prepared punch list per API686 and commissioned the plant

-Century Enka (India) Ltd., Nylon tire Cord Plant Pune, India

* Constructed & commissioned of $70m Nylon Tire Cord Plant
* Installed & commissioned Pusher Centrifuge with variable frequency drive, double diaphragms pump, reciprocating screw pumps etc.
* Gathered knowledge of rotary drum filter, rotary vacuum filter, agitator and gear boxes of various capacities and make

-ISAGRO Agrochemicals India Ltd., Gujarat, India

* Constructed & commissioned of $120m Agrochemicals Plant
* Detailed scope of work and prepared tender documents for contractors
* Evaluated bids and attended bid conditioning meeting before recommendation

1991 - 2000
ICI Inda Ltd. (a subsidiary of ICI, UK), Calcutta, India
Position: Intermediate Field Mechanical Engineer

Project Handled

-ICI India Ltd., Poly Urethane Plant, Mumbai, India

* Constructed and commissioned of $20m Polyurethane plant
* Supervised erection & commission of 330¢XC hot oil generating unit with 50m3 spherical head jacketed vessel and centrifugal jacketed pump
* Solved material choking problem and problem of counter current flow for high viscosity material
* Oversaw the checking and compiled mechanical completion dossiers for process pipe work and associated equipment, prior to submission to client for approval

-1000 TPA Paints Manufacturing Plant at ICI India Ltd., Mumbai, India,

* Constructed and commissioned of $50m Paints manufacturing plant
* Revamped 125 hp centrifugal slurry pumps with mechanical seal and VFD
* Developed engineering package for dust extraction system
* Conducted failure analysis of existing chilled water pump

-ICI India Ltd., Rubber Chemical Plant, Calcutta, India

* Constructed and commissioned of $80m rubber chemical plant
* Incorporated reciprocating pump instead of centrifugal pump for MIBK dosing
* Negotiated scope of supply and drawning specification of rotary and vacuum drum filter
* Incorporated the changes to data sheet made on the P&ID, and communicated to vendor
* Reduced plant downtime by introducing drum filter for Na-MBT mother liquor manufacturing. Maintenance over time cost also reduced significantly by doing the same
* De-bottlenecking project which includes:
-Supervised installation, commissioning & modification of reciprocating instrument air compressor with dryer
-Supervised installation, commissioning & modification of chiller compressor and heat exchangers (shell & tube)
-Supervised installation, commissioning & modification of bucket elevator (30mt height)

-Nitrocellulose project at ICI India Ltd, Gujarat, India

* Constructed & commissioned of $30m Nitric Acid Recovery Plant
* Managed revamping of 75m3 wash tank side-stirrer. Introduced mechanical seal with soft (carbon) & hard (silicon) face combination
* Worked in setting up river water pumping station of 1.4 million gallons/day for nitrocellulose project including field testing of 250 HP centrifugal pump Optimized shut off head and minimum flow to bring down pipe ratings from 600# to 300#
* Installed 2nos. 18mt glass columns, 22nos. glass shell & tube heat exchanger and 2nos two-stage glass evaporator made by Scott

EDUCATION:

„«Mechanical Engineering diploma (4years after High School Graduation) from Birla Institute of Technology (BIT), India.
„«APPEGA registration is on progress in Canada
„«PMP certification by PMI is on progress
„«certification from Mount Royan College, Canada
PMP exam preparation workshop
Risk & Procurement
Time & Cost Management
Integration & Scope Management

REFERENCES AVAILABLE ON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 3115)

Go to Search Parameters...

Brief Description

A Graduate Civil Engineer of 18 years experience (10 years in Kuwait & 8 years in India) in various levels in the field of Project Management and Construction, at present working with Kuwait National Petroleum Company¡¦s Project Department On Secondment basis.

To work in the field of latest technologies to amalgamate with the nature.

Skill: Auto CAD; Solidworks...Mechanical bachelor degree

Resident Engineer Project Manager

I'm a bachelor degree in mechanical engineering and masters degree in occupational health and safety, I have more than 14 years experience in QA/QC activities in EPC Company. And also I have IRCA certificated as QMS Auditor.

Construction Manager with 15 years of Experience

(15) years of Oil and Gas, Engineering, Procurement and Construction related experience enhanced with several college/university courses in Project and Supply chain management.I have excellent communication and negotiation skills, dependable, organized, proactive and hardworking

Engaged in major project execution of ROADS & HIGHWAY, AIRPORTS , COMMERCIAL PORT & POWER PLANT

Highly adaptable, mobile, positive, resilient, patient risk-taker and is open to new ideas. Productive worker with solid work ethic and exerts optimal effort in successfully completing tasks. Versatile all around worker which can handle multitasking

Experienced in Structural Steel Detailing. Highly proficient in AutoCAD, Capable to produce quality Erection plans and Shop Drawings.

Experienced CAD Technician with an excellent work ethic; loyal, and a team player.

Resourceful Project Superintendent and QA Supervisor with expertise in oil and gas industry project installations and industrial construction; focused on positively impacting cost control, resource maximization, timeline management, and team performance.

Over 25 years in the Construction Field

INSTRUMENT AND CONTROL ENGINEER, DCS SYSTEM AND CONVENTIONAL SYSTEMS EXPERIENCE.

I have over 18 years in experience in the construction,design and administration of large projects.

+20 years work experience in fire alarm life safety, special hazards and low voltage industry. Bachelor of science in electrical engineering. NICET certified engineering technologist (Level 3 in fire alarm systems).

Construction management, and design of roads, infrastructure, utilities, pad sites, drainage and storm water management facilities.

Project Construction Management Professional have built High rise,Low rise,Industrial ,Infrastructrure and hospitality projects

Port Planning, Construction, project Management

An affiliate member of the Institution of Civil Engineering Surveyors. Experience of close liaison with the Client, Supervisor / Consultant Engineer, Contractor and Sub-contractor’s representative. Proficient in the management of keeping detailed records .

Facade Design, Curtain walling, cladding design

Civil/Structural engineer

Installation of electrical control,installation of electrical pannel board,installation of equipment overhead crane,trouble shooting,electrical control/machine,termenation of low/high voltage cable jointer

Engineering Technician/ Facility Manager

Fifteen years progressive experience in Construction Management and Engineering, Experienced in building and civil engineering works namely, roads, drainage, sewer and water networks, earth works and deep shaft construction, Full Member of the Charted Institute of Building UK (MCIOB)

Special Inspector CWI/ICC, Bolting, Fireproofing, B1 Inspector

Experienced structural engineer (US and Australian experience)

Mechanical Enginner with more than 16 years of experience in the field of Construction, Maintenance of Petrochemical, Chemical and Power plant

Acquire 17 years of experience as Mechanical Construction Field Engineer in Oil & Gas (Upstream & Downstream), Chemical, Petrochemical & Pharmaceutical projects. Experienced in Planning, Organizing & field monitoring activities related to Piping and Equipment (Rotary & Static) installation.

Recently had the M.Sc. degree in electrical engineering from University of Technology

A result oriented leader with nearly 15 years of extensive experience in Project Management, Production, Plant Operations, Procurement, Erection & Commissioning and Maintenance Operations.

B.SC. ENGINEERING, PROACTIVE TECHNIQUE,ISO9001:2000 & HSE

Civil Engineer. Formwork Specialist. Experience: 14 years. Mounting, Scaffolding, Precast Concrete.

Fujitsu LV-III Installer, OSP Field Engineer, Structure Cable Lead Installer, Fiber and Copper Splicer, Network Tech, Antenna Tech

Over 20 years of extensive experience as an international consultant. Provider of structural software for the analysis and design of concrete & steel according to ACI, AISC & API codes of practice. Expert in; structural systems & forensic investigation. Professional in; STAAD III & MS office Suite.

B.E.(Mech.) & BEE certified Energy Auditor

I am a civil engineer with more than 12 years of experience in Mauritius. I hold a first degree in civil engineering, a master degree in environmental engineering and another master degree in business administration. I already got my Permanent residence for Australia since July 2008.

Mechanical project &maintenance engineer with 17 years of industrial experiance.

Over 16 years of experience in construction industry local and abroad. Responsible for completing the project within time and within cost.

HVAC Professional Having 17 Years of rich Experience in Major MEP projects,expert in handling fast track projects with in project time frame and budget..

Quantity Surveyor 3 yrs experience in Gulf

MEP Cad Designer / MEP Cad Coordinator / HVAC Designer

Knowledgeable in electrical, mechanical, and some electronics

all-round civil engineering background with experience in traditional building constructions and special structures, such as bridges, tunnels, towers, piers and offshore structures including design, planning, project management, quality assurance and supervision.

Extensive experience and skills to help industrial organizations improve their effectiveness through better use of processes and systems. Also very proficient in development and use of integrated improvement teams.

Knowledgeable and experienced Design Procedures with 15 years road construction experience

20 years in Oil/Gas in Eng. ,Procur.and Construction including Piping Design in accordance with international codes, Procurement Technical Services & Construction Supervision. Management of Eng. Staffs in Multinational and International Environments Conversant with ARAMCO and SHELL DEP Specs

Instrument technician - PLC/DCS programmer

Civil Marine, Dredging & Coastal Engineering. record: 70 projects

Road works

First 1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out