Resume - Diploma of Associate Engineer in Civil Technology

Misco Jobs

Resume #81214

CONTACT INFORMATION:
View contact information...

Experience AUG 2008¡Vto date Pak Elektron Ltd (PEL) Lahore.
Civil Engineer / Quantity Surveyor
„X Site management and dealing with contractor & suppliers.
„X Top monitoring off all civil works including R.C.C work and Infrastructure work etc.
„X Incorporate the activities as per schedule.
„X Co-ordination with Consultant of the project.
„X Co-ordination with head office and maintain the daily progress of project
„X Preparation of Bill of quantities & cost analysis.

Project: Construction of Transformer Unit-2
(Construction of Assembly shop covered area up to (200,000 Sft) PEB Structure, with over head crane facility, Cable trench, duct, Rcc Flooring, Executive office block with high quality finishes i-e fixing of imported tiling on Floor, Dado finishes with groove on walls, over head water tank, Construction of sub station, construction of Gate / reception office Store, executive mess, canteen and other infrastructure (Roads, Water supply, Sewerage, Surface Drain etc).
May 2007¡VAug 2008 Syed Bhais (Pvt)Ltd Lahore Pakistan

Site Engineer
„X Site management.
„X Monitoring of internal and external finishing works.
„X Coordination with Deputy Project manager for planning.
„X Preparation of IPC, contractor bills.
„X Preparation of rate analysis, Claims for extra work and application of different clauses
„X Checking of bar bending schedule.
„X Preparation of daily, weekly, monthly progress report.

Project: Construction of Transformer/Switch Gear Unit
(Transformer Assembly Shop (Shell Structure) Switch Gear (double story two way slab with facility of office block) & Mechanical Shed with service area. All buildings are fully frame structure.
May 2006¡VMay 2007 Packages Ltd Lahore Pakistan

Construction Supervisor/Quantity Surveyor
„X Preparation of BOQ for the new construction/Renovation & Maintenance work
„X Planning of required material, labor and equipments.
„X Preparation of construction schedule.
„X Preparation of daily progress reports as per schedule.
„X Co-ordination with head office.
„X Verification of payments/quantities as per drawings/site measurements.
„X Preparation of rate of analysis.
Project: Bulleh Shah Paper Mill Kasur
(PM 6, 7. Coating Building, Power house, Diemen's plant foundation/ Tank area, pipe rack foundation, Heavy Machine foundation, Construction of PEB shed for store area. Construction of other infrastructure. )All Buildings are fully frame structure.
March 2005 - May 2006 A.Rahim Foods/Town Builders Lahore Pakistan

Civil Supervisor
„X Supervision of Construction work for the extension of (DAWN BREAD) Factory building.
„X Supervision of multistory Commercial Plaza at DHA Lahore.
„X Monitoring the sub contractor activities at site.
„X Verification of contractor's bills.

Aug 2001 ¡VMarch 2005 TMA Ravi Town Lahore Pakistan

Supervisor(I&S)
„X Supervision of R.C.C, masonry, sanitary and plumbing, water proofing treatment, marble and glazed tile finishing.
„X Preparation of daily progress report.
„X Implementation of detail specifications.
„X Checking of material as per specification.
„X Supervision of Patch work.
„X Supervision of Concrete Roads work

Project: Construction of General Bus stand buildings, internal roads,strrets,Streelight/Road Lighting etc.
March 1999 ¡V Jan 2001 NLC Engineers Lahore Pakistan

Sub Engineer
„X Layouts, estimation of Roads, Buildings works. Verification of Contractor Bills
„X Construction of Brigadier house in DHA Lahore.
„X Construction of Jail Road, Defence Roads, Access Road, ADP Project.
„X Work in chief minister taskforce for infrastructure maintenance.
„X Summary of projects
„X Planning / Scheduling and Costing of Project
„X Construction of Paper Mill.
„X Construction of Transformer/Switch Gear Building.
„X Repair & maintenance & renovation work in executive offices /officer Mess.
„X Safari Villas/Residential houses.
„X Frame structure high-rise Commercial Building at 162 Y Block DHA Lahore.
„X Frame Structure Industrial Buildings.
„X Multi story Bread factory (Plinth hall) finishes with marble & Tile finishes.
„X Infrastructure (water supply, sewerage, roads)
Work Experience
10 Years

ACADEMIC PROFILE
Diploma of Associate Engineer Civil 1994-1997
Punjab Board of Technical Education Lahore Pakistan.
Diploma in Weaving Management 1993
SSC 1990
Board of Intermediate and Secondary Education DG Khan

Computer Skills MS. Office
(MS Word, Excel, Ms Project, Internet, etc)

OTHER INTEREST
Cricket and Computer games.

Personal Information
Marital Status Married
Nationality Pakistani
Date of Birth June,06,1972

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 3118)

Go to Search Parameters...

Brief Description

I am currently looking for a construction assignement overseas, in the fields of instrumentation or building management systems.

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter (Brown & Root, GE),

I am a multi field Estimator, Designer and Project manager, Electrical and mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.

A DIPLOMA IN MECHANICAL ENGINEER HAVING 20 YEARS EXPERIENCE IN CONSTRUCTION FOR VARIOUS INDUSTRIES LIKE CROSS COUNTRY PIPELINE, CEMENT, CHEMICAL, FERTILISER, POWER, ETC., PRESENTLY FOR THE PAST 7 YEARS WORKING AS A DY. MANAGER (CONSTRUCTION) WITH SIMON INDIA LIMITED, INDIA.

Truck driver

A professionally qualified Engineering Project Manager, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical and management skills well as practical, ‘hands-on’ involvement.

20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.

I am very experienced and have worked at all levels worldwide and also worked with many nationalities. I work very hard and get on well with everybody.

Mechanical & Electrical Engineer Location East London, Essex, Kent, Greater London Salary To £30,000 plus package

Civil Engineer with solid background in structural design, experience working with oil companies. Project supervision experience, costing and evaluation. Vast field experience leading working crews and supervising jobs. Good communications skills. Multilingual, speaking Spanish, French and Italian.

Mining Engineer and Geologist with twenty-seven years’ in precious and base metals, coal and industrial minerals. P. E. licenses in three states, with unique construction achievements. Advanced technical and strong supervisory skills in underground and surface settings.

Work Experiences : Mechanical equipment and piping installation in the following industrial plants: 1) Natural gas plant 2)Power plant 3)Polypropylene plant 4) Oil Refinery 5)Desalination plant 6)Steel mill 7)Foundry plant(maintenance of mechanical equipment)

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

Looking for a new challenge at the end of 2003 my present contract end then

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),

Erection, Commissioning field instruments & Systems

AutoCAD, PDS (3-D modeling). Lead engineer of erection department

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Civil engineer from India , Now i am working in oman since 2007 , feb . I want a site engineers jobs in australia .For that i need employer sponsored visa.

Riview contract, Claim of insurance, Invoicing , Claim od additional and variation works, Count the Quantity progress.

Electrical engineering on EPC projects, analyses of power distribution grid, FEED design of power distribution and power generation systems, detail design of power distribution in hazardous and non hazardous areas, technical coordination of subcontractors and procurement on projects, site supervisi

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Mature Canadian seeking work on major civil projects. Available Immediately.

Piping Design using CadWorx, Smart plant Review. Construction General Foreman

3 years Diploma (mechanical engineer) &12 years work exp- oil & gas area for mechanical supervisor.

Seasonal Professional with nearly 9.3 years of experience in Construction, Erection & Project Management and Team Management with well known organizations. Demonstrative abilities in identifying potential, deconstructing complex situations and further conceiving and implementing streamlined solutio

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

Diploma of Associate Engineer in Civil Technology

I have BSC in electrical engineering and now I am working in ethiopian electric power corporetion since june 16 - 2005 under protection and communication enginering

I finished in diploma in Architecture, master diploma in architecture cadd

I have 4 years experience exclusively as a safety and Security professional. Presently working with Technical & Trading Establishment (Technical Division of Easa Saleh Al Gurg Group) as a Health & Safety Officer. As far as my Education is concerned, I Have Completed my Diploma in Mechanical Engineer

I have more than 14 years expertness in construction and 6 years in LNG and oil and last project for me was in Sakhalin I work there more than 2 years

Proficient in Microsoft Office suite (Word, Excel, PowerPoint) and AutoCAD

I have worked as an Associate RF Engineer where my responsibilities were . Post & Pre Drives, Single site verification, hand off, call dropping, blocked calls, signal level, and frequency scanning . Used Delorme Streets & Atlas for route determination & navigation.

I am intrested to work as senior planning engineer with a consultant, project management group or with a developer in Abu Dhabi, UAE

Solutions-oriented Field Service/Application Engineer with a proven track record of delivering effective product engineering, maintenance and customization across a diversity of industries.

I am an Instrumentation Supervisor with a large experience in oil and gas projects, I have worked many years for importants companies in Brasil, Saudi Arabia, UAE, Mexico and USA.

Seeking a position with an organization that allows me the opportunity to utilize my education, experience, skills, and talent to achieve and promote a common goal in a teamwork environment.

Construction Engineer in Oil and Gas Facilities

Resume 2003: Joseph W. Bisselle Location: AZ, USA. Objective: Engineering, Supervision, Maintenance or Managerial Position. Relocation and overseas positions are considered.

11 years of rich and diverse experience in Engineering and Construction industry covering wide spectrum of activities including Project controls, Construction Supervision, Quality control etc.,

electrical design/project engineer with 14 years of work

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out