Resume - Piping Designer (HVAC Piping and Plumbing Systems)

Misco Jobs

Resume #81443

CONTACT INFORMATION:
View contact information...

Objective
To secure a position with a company that will utilize my skills in both the Mechanical Design Field and or the Information Systems/Technology field.

Experience

2001–Present U.S. Engineering Company Kansas City, MO

Information Systems Manager / Project Mechanical Detailer
(See descriptive Job summary below)

2000–2001 Joseph Davis Company Buffalo, New York

Project Mechanical Detailer / Project Engineer / Project Manager
- Detailed Mechanical Disciplines (Plumbing and HVAC Piping).
- Headed up the coordination process (all disciplines).
- Project Engineer / Manager duties while stationed at various job sites..

1996–2000 U.S. Engineering Company Kansas City, MO

Project Mechanical Detailer / Project Engineer
- Detailed Mechanical Disciplines (Plumbing and HVAC Piping)
- Headed up the coordination process (all disciplines).
- Project Engineer duties while stationed at various job sites (assisted Project Manager).

Education

1983- present Various Educational Seminars/Schools
1982 Defense Mapping School Fort Belvoir, VA
1981 Park Hill High School Kansas City, MO

Software AutoCAD 2007, QuickPen Piping CAD (I-draw), CadPipe, Pro-Pipe, Microsoft Server 2003, Microsoft Exchange 2003, Microsoft Office 2003, Microsoft Frontpage 2003, Microsoft Project 2003, Suretrak, Toolwatch, Act!, and others.

Project Mechanical Detailer / Project Engineer

Summary of Job:
To oversee the overall coordination process of a project as well as assist the Project Manager and Superintendants with needs they may have (submittals, RFI, SDI generation or any other assistance that may be required for a successful project).

Summary of Job responsibilities:
* Lead the overall coordination process of all trades / specialty contractors involved in a project
* Help generate fitting/pipe or fixture take-offs to insure a successful bulk buy.
* Detail and coordinate HVAC Piping and Plumbing accurately to insure the minimal amount of collisions during a project.
* Generate fabrication drawings to facilitate a quick and accurate installation of Mechanical Systems.
* Work with Project Manager to assist with submittals of Mechanical Equipment
* Generate RFI's, SDI or any other documentation addressing specific needs of a project to insure a successful project.
* Assist in any way needed as to insure a successful project

Summary of Job experience and knowledge:
* Strong Background in AutoCAD
* Good working knowledge of 3D software to help facilitate the coordination/fabrication process
* Strong understanding of project management/engineer duties
* Strong leadership skills.
* Excellent written and oral communication skills.
* Excellent interpersonal skills.
* Strong project drawing research skills all disciplines
* High level of self-motivation.
* Keen attention to detail.
* Proven analytical, evaluative and problem-solving abilities.
* Ability to effectively prioritize and execute tasks in a high-pressure environment.
* Exceptional customer service orientation.
* Extensive experience working in a team-oriented, collaborative environment.

Information Systems Manager

Summary of Job:
Responsible for the overall planning, organizing, and execution of all IT functions. This includes all information technology operations to meet customer requirements (end users) as well as the support and maintenance of existing applications and development of new technical solutions.

Summary of Job responsibilities:
* Lead the IT department's operational and strategic planning, including fostering innovation, planning projects and organizing and negotiating the allocation of resources.
* Manage the deployment, monitoring, maintenance, development, upgrade and support of all IT systems, including telecommunications, servers, PCs, operating systems, hardware, software, peripherals and Office Automation equipment.
* Benchmark, analyze, report on and make recommendations for the improvement and growth of the IT infrastructure and IT systems.
* Provide end-user services, including help desk and technical support services.
* Work with stakeholders to define business and systems requirements for new technology implementations.
* Keep current with the latest technologies.
* Assist in developing and implement all IT policies and procedures, including those for architecture, security, and disaster recovery.
* Develop requests for proposal.
* Manage asset management for IT hardware, software and equipment.
* Establish and maintain regular written and in-person communications with the organization's executives, department heads and end users regarding pertinent IT activities.
* Setup, maintain and monitor remote site to site VPN solutions to include implementing and managing an SSL appliance(s), hardware point to point solution(s) and also internet security appliance(s) (Firewalls).
* Setup, maintain, and monitor on site security/surveillance system (8 camera, Multi-plexing DVR solution)
* Maintain an IBM I-series as well as the X-series daily as well as disaster recovery backups

Summary of Job experience and knowledge:
* Seven years of related work experience.
* Strong technical knowledge of telecommunications, network and PC operating systems.
* Strong technical knowledge of current network hardware, protocols and standards.
* Extensive application support experience.
* Proven experience in IT infrastructure planning and development.
* In-depth knowledge of applicable data privacy practices and laws.
* Strong understanding of project management principles.
* Strong leadership skills.
* Excellent written and oral communication skills.
* Excellent interpersonal skills.
* Ability to conduct and direct research into IT issues and products as required.
* Ability to present ideas in business-friendly and user-friendly language.
* Ability to perform general mathematical calculations for the purpose of creating business cases, budgets and so on.
* High level of self-motivation.
* Keen attention to detail.
* Proven analytical, evaluative and problem-solving abilities.
* Ability to effectively prioritize and execute tasks in a high-pressure environment.
* Exceptional customer service orientation.
* Extensive experience working in a team-oriented, collaborative environment.

U.S. Army Veteran

June 1980 – April 1989 (Honorable Discharge)

Units
HHC 20th Engineer Brigade (Fort Bragg, North Carolina)
HHC 7th Engineer Brigade (Kornwestheim, Germany)
HHC 36th Engineer Group (Fort Benning, Georgia)

Primary MOS: 81BVP
Secondary MOS: 11BVP

Projects Overview

Large Jobs (3 years or greater, work performed on-site)

- Charles Evans Whittaker United States Federal Courthouse – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe, Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Metric job, generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space). Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- Children's Mercy Hospital In patient tower addition – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe, Plumbing, Medical Gases, Electrical and Fire Protection, Pneumatic Contractor) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- Sprint Campus – Overland Park, Kansas – Headed the coordination process (several buildings) for all trades (HVAC Duct, HVAC Pipe, Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades), various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space). Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- Kansas City International Airport Expansion/Remodel – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe, Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for Information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked with Project Management staff as well as Field personnel to insure that any needs were met to insure a safe successful project.

Medium Sized Jobs (2 years or greater, work performed on-site)

- University of Syracuse Boiler Room Expansion and Emergency Room Addition – Syracuse, New York – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe, Plumbing, Medical Gases, Electrical and Fire Protection, Pneumatic Contractor) to insure minimal conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked as a on-site Project Engineer performed the day to day duties needed to insure a safe successful project.

- Muelbach Hotel Remodel/Expansion – Kansas City, Missouri – Headed the coordination process (several buildings) for all trades (HVAC Duct, HVAC Pipe, Plumbing, Electrical and Fire Protection) to insure minimal conflicts between the various disciplines (trades), various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space). Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- Hotel President Remodel – Kansas City, Missouri – Headed the coordination process (several buildings) for all trades (HVAC Duct, HVAC Pipe, Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades), various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space). Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- State Street Bank Data Center – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe (redundant system), Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked as a part-time on-site Project Engineer performed the day to day duties needed to insure a safe successful project.

- Attica School District Air Conditioning Addition – Attica, New York – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe (redundant system), Plumbing, Electrical and Fire Protection, Pneumatic Contractor) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked as a part-time on-site Project Engineer performed the day to day duties needed to insure a safe successful project.

Small Sized Jobs (1 year or greater, work performed on-site and in the office)

- Shawnee Mission West Air Conditioning Addition – Shawnee, Kansas – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe (redundant system), Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked as a part-time on-site Project Engineer performed the day to day duties needed to insure a safe successful project.

- St Joseph's Hospital Emergency Room Addition and area remodels (South) Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe, Plumbing, Medical Gases, Electrical and Fire Protection, Pneumatic Contractor) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked with Project Management and Field personnel to insure that any needs were met to insure a safe successful project.

- 909 Walnut Remodel – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe (redundant system), Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Generated Seismic drawings (zone 2A) utilizing SMACNA standards, various materials takeoffs, sleeving layouts, generated Request for information for troublesome areas (where trades did not fit in allocated space) and several other project related needs and duties. Worked as a part-time on-site Project Engineer performed the day to day duties needed to insure a safe successful project.

Industrial Jobs

- Marion Labs GLAT addition – Kansas City, Missouri – Headed the coordination process for all trades (HVAC Duct, HVAC Pipe (redundant system), Plumbing, Electrical and Fire Protection) to insure minimal system installation conflicts between the various disciplines (trades). Worked as a on-site Project Engineer/Detailer and performed the day to day duties needed to insure a safe successful project.

- FMC conveyor addition – Lawrence, Kansas – Headed the coordination process for to insure minimal system installation conflicts between the various disciplines (trades). Worked as a on-site Project Engineer/Detailer and performed the day to day duties needed to insure a safe successful project.

- Pop Tart Plant – Muncy, Pennsylvania – Designed Pneumatic Conveying System and also headed the coordination process for to insure minimal system installation conflicts between the various disciplines (trades).

- Junior Mint Plant – Mexico – Designed Pneumatic Conveying System and also headed the coordination process for to insure minimal system installation conflicts between the various disciplines (trades).

- Ford Motor Company – Claycomo, Missouri – Various project layouts of several different types of systems, E-Coat, Air-Handler/ Unit Heater additions or area remodels, coordinated mechanical related systems around conveyors and other trades work.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 3125)

Go to Search Parameters...

Brief Description

I have 15 yrs experience in construction supervision of roads and bridges (RCDG), concrete slope prot. works, RCBC and concrete retaining walls. Presently I am working in Saudi Arabia as Civil Engineer handling big highway proj. designed for asphalt pavement.

Sr Instrument Engineer with over 15 years experience in the design and specifications of instrumentation for petrochemical plants, and 2 years for offshore platforms

Structural/Geotechnical Engineering jobs such as Pile design, Retaining wall design and project management

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

I have 17 years of Planning experiences within oil and gas, petrochemical, mining, power plant and industrial plant construction. I am also an advance user of P3/P5/P6.

Project & Construction Manager

B.E. with 22 years of experience in Highways, Industrial and Building construction, out of which 3 years in Saudi Arabia. The experience includes-

I am a sri lankan working in oman -presently in the field building services as an engineer. Capable of designing - cold & hot water supply systems, sanitary plumbing stsems and fire fighting systems)

I have been in Truss deaign,layouts,and engineering for approx.36 years. I have experience in single family commercial,spealizing in multifamily design of beams, componets,floors and roof trusses

Total station operator

15 year of experience in the glass and aluminium industry

Application for the post of project manager/ section manager

Debasis is a geotechnical engineer and numerical modelling specialist within Scott Wilson’s Ground Engineering team. He is currently responsible for numerical modelling and geotechnical design input for tunnel linings, retaining structures and earthworks working on a variety of infrastructure sche

Professional individual having Soil Investigation, Soil Improvement, Diaphragm wall construction, Quay wall construction, Piling, Drilling Techniques (All Types) Geotechnical Special Testing, Material Testing, Geotechnical & structural Instrumentation & Geological Mapping skills.

Electric Engineer

B.Eng, Traffic and Transportation Planning and engineering, local area traffic management, transportation modelling, sidra, transyt, trips, bus transit, light rail route and station planning

Traffic Engineer with Master of Technology degree in Transportation Engineering. I have about 11 years of technical and project management experience in UAE, Qatar, India, Sudan and Saudi Arabia, in the area of traffic and transportation engineering/planning;

Advanced Certified Interconnect Designer. Trade Radio Technician. Diploma Electronics Eng. CID & CID+ Training. 17 years experience in both Comercial and Defence (Aus) Specialising In High Speed Digital, RF, Analogue and Video Board Design using Altium Software.

Piping design and gernal 3D model design using AutoCAD and CADWorx. Conduct reviews for Design Engineers and Field Engineers with Navis software. Direct drafters in preparation of drawings and plans. Coordinate drawings with other design agencies, fabrication and construction.

NDT level III, Senior certified welding inspector, experienced in most industries

Results oriented engineering professional with 20 years experience in project management, process engineering, and facility engineering

Directing Large Engineering Teams.

VERY GOOD EXPERIENCED IN CIVIL ENGINEERING AND CONSTRUCTION PROJECTS SUCH AS CONSTRUCTION OF BUILDINGS, ROADS, HOUSES AND HOSPITALS.

I am a railway track engineer past 25 years in INDIA, MALAYSIA,DUBAI METRO PROJECT.

Project Manager in Civil Engineering with 14 years experience. Excellant communication skills and able to work under pressure with minimum supervision.

Over 15 years of working experience in the construction projects on heavy civil works, roads, bridges, metro rail, building construction, petrochemical plants, industrial plants, multi – purpose irrigation system, commercial/ residential buildings, and knowledge in Engineering Tendering and Contrac

Power pant engineering

Above 14 years of worked experienced in Instrumentation and Electrical Control System overseas in a Reputable International Construction Companies. Supervision, Erection, QA/QC Inspection, Start-up, Commissioning and documentation works. Review Design and technical responsibilities for good quality,

I have Eleven years of experience in Architectural design development, planning & scheduling, DD & CD development for Architectural/Interior projects. I have experience on windows environment and worked on CAD Applications like ACAD, Revit implementation and management tools like MS Project, Primave

Qualification:Bachelor of Engineering(Civil),from Assam Engineering College,Experienced in design of RCC Bridges with Pile /Well foundation

Significant experience in electrical construction, commissioning, production and maintenance

I am applying for a position that suites my qualifications and experiences. Civil Engineer, who have high proficiency in Project Management, People Handling, Problem Identification and Definition, Problem Solving, which I acquired thru my long time exp

Capable to manage an organization for Electrical and Civil Engineering jobs.

A higly adaptable professional of proven ability with extensive on-site experience in worldwide locations who offers: construction and civil works expertise, safety and QA/QC awareness

Education from both China and United states major in transportation engineering and computer science. As a transportation engineer with more than 10 years¡¦ experience in both United States and China, his work extended from general transportation infrastructure design, transportation plan

Heavy civil construction skills. Concrete apllications and procedures. Sediment and erosion. Overhead and underground utilities construction. Heavy equipment operation. Regulatory laws pertaining to heavy construction.

Marine Surveyor

FOR THE POST OF QUANTITY SURVEYOR (BUILDING SECTOR)

Certified PMP having rich experience in EPC & construction management of Real Estate, Infrastructure and Petro-chemical Projects, Proficient in Primavera, MS Project and MS Office

B. Com. 16 years of experiences different construction materials such as soil, aggregates, concrete & asphalt laboratory & field test & Prepared test reports by using computer.

Land Surveyor , Autocad Tech.

Mr. Bipradas Rajbongshi is a specialist in the field of Geotechnical Engineering. He has 20 years experience in technical and managerial roles.

Over 13 years experience in positions including Project Engineer, Quality Control Engineer, Civil Engineer, Project Planner and Scheduler, Estimator, Crane Lift Supervisor, Welding Inspector, Land Surveyor and Draftsman. Nine years performance on U.S. Military Construction Programs

Piping Designer (HVAC Piping and Plumbing Systems)

Bitumen storage terminal construction and all bitumen products manufacturing expereince

Mechanical building services design engineer. Experience in design HVAC, Plumbing & Fire Fighting along with site supervision and project management activities.

Instrumentation technician with 20+ years of experience

Mechanical Designer with over 20 years experience preparing process piping layouts, hydraulic and pneumatic schematics, isometrics, assembly, P&ID’s, and detail drawings, as well as laying out the placement of mechanical equipment. Adept at performing field walkdowns, surveys, and meeting with clie

Electrical Engineer

Qualified Experienced Senior Construction Inspector

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out