Resume - Senior Geotechnical / Civil Engoneer

Misco Jobs

Resume #81569

CONTACT INFORMATION:
View contact information...

EDUCATION
October 2006 – October 2007 University of Birmingham Edgbaston, Birmingham, UK
Department of Civil Engineering
Degree: MSc in Geotechnical Engineering and Management
Course included: Ground Engineering (land contamination and remediation, ground improvement, soil reinforcement, tunneling design, dewatering and sustainability);
Foundation Engineering Design (Euro-code 8, pile and foundation design, bearing capacity of soil, earthquake);
Slope Stability and Retaining Structure (included studying the method of analyzing the stability of the slope and finding the reason of the landslide, giving a good remediation for stopping the landslide and creep, designing the retaining structure (Gabion wall, concrete wall) and designing the Sheet-pile));
Soil Mechanics (understanding the properties of the soil and the method of the test for finding the properties, analysis of the seepage, and knowledge about the consolidation of the soil);
Engineering Geology (geology of the ground, rock mechanics, and hazardous areas for construction);
Site Investigation; and
Construction Management
Dissertation research project: Effect of the fine under behavior of ballast under cyclic and static load with different moisture content
1997 – 2002 Tehran University Teheran, Iran
Department of Civil Engineering
Degree: Bachelor of Civil Engineering
Course included: Static, Dynamic, and Fluid Mechanics; Concrete Structures Design; Steel Structures Design; Structure Analysis; Foundation Engineering Design; Concrete Mix Design; Earthquake; Hydrology; Aggregates and Building Materials; Surveying; Mechanics of Rigid Body; Soil Mechanics; and Road Design.
Research projects: Concrete structure design; Steel structure design; Road designing; and Waste water management.

PROFESSIONAL CERTIFICATES
Track Accustomed Fire safety in London Underground (LUL)
Highways Safety Traffic management (Red book)
FWD Santos Card (Australia) CDM 2007

MEMBERSHIP IN THE INTERNATIONAL ORGANIZATIONS
August 2006 – present time The Midlands Geotechnical Society UK
2008 – Present time ICE UK
2006 – Present time American Civil Engineering Society USA

COMPUTER SKILLS
AutoCAD: drawing maps, detail design, 3D modeling, Sap2000: analysis of the structures,
Primavera: project planning and budgeting, Slope W: Slope stability analyzing,
Plaxis: Geotechnical Finite Element, Seep W: Analyzing of seepage.
LANGUAGES
Farsi (native speaker); English (fluent oral & written); Arabic (fluent); Turkish (fluent)

WORK EXPERIENCE
Jan 2009 - currently URS Australia
Senior Civil/Geotechnical Design Engineer/ Project Manager
* Designing Earth Dams for Santos mine projects (slope stability, seepage, construction materials, site investigation and split-way);
* Designing a reinforced soil retaining wall for Australian government (site investigation, internal stability and external stability);
* Managing Projects for Earth Dams;
* Running the tenders for the projects;
* Monitoring and training the junior Engineers in the office;
* Teaching Project Management course and Primavera software for junior Engineers in the office
June 2008- Jan 2009 Atkins London
Geotechnical Design Engineer
* Designing the retaining walls for LUL;
* Assessing the contaminated areas in the London Underground;
* Assessing the old retaining walls and structures in the London underground for BTR;
* Running the tenders and organizing the project management for the above projects
Sep 2007- June 2008 Highway Agency (InterRoute) England-Kent
Geotechnical Design Engineer
* Writing the desk study reports, Site investigation general reports, IRF210 (Design Geotechnical reports) for parts of A21 and M23;
* Designing several remediation for defects (landslide, crack on the carriageway) for the above roads using the best traffic management;
* Designing the pile foundations and assessing the foundation settlement under the bridges in the carriageway.
2004 – 2006 Maroon Consulting Company Iran
Site Manager: In the Project of the longest railway track from south of the Iran to the North.
Construction Manager: Construction of the Kerman-shah Petrochemical Factory.
I was a member of the Pile designing team in the offshore and inshore project for Asalouyeh port.
I was working as a member of Concrete structure Designing team – The job included the design of the foundation, pipe rack, and drainage system for Kerman-shah Petrochemical Project.
2001 – 2004 Payavar Engineering Company Iran and Syria
Site engineer inspector: Earthwork project of the new cement factory in Syria.
For the Site Investigation in the Crude Oil Store Concrete Tank Project
A member of team for designing the retaining structures of the Petrochemical Phase 4&5.
A member of team for designing & constructing the Dynamic Compaction in Olephin 10th Project.
A member of team for designing the roads in the Omidiyeh Way Project.
AWARDS
2003 The Iranian Concrete Institute: Prize-winner certificate for the best durable concrete design Teheran, Iran
SPORTS Black belt in karate (Three Dans)

REFEREES Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 3123)

Go to Search Parameters...

Brief Description

Throughout my Professional Career and experiences being a GC, one of my duties was Estimating, which I did learned and had to do from ground Up, on most of the Projects I did Participated in, from simple Electrical Ductworks up to Special Warehouses at Industrial Division.

I have been employed in the field of Power Engineering, Industrial Installations, Cement Industry and Sewage Treatment Plants at all stages, covering turnkey projects: erection, starting - up, commissioning, running and all kinds of maintenance.

Instrument supervisor

12 years expirience in my career as a Engineering CADD Draughtsman

Autocad, microstation,

Engineer civil site

SENIOR ELECTRICAL DESIGN ENGINEER - BUILDING SERVICES

Diploma in Mechanical Engg. Having 19/20 years of experience in FABRICATION AND PLANNING of structural steel, Pressure vessels, Boiler, as per ASME code and storage tanks etc. Last 15 years Iam working in Dubai in various organisation in verious responsible positions.

I am Bachelor of mechanical engineer having extensive oversease experience in the field of Oil and Gas Costruction.

Actively seeking a position in „o PROJECT ENGINEER „o With an organization needing a professional demonstrating ability in providing consistent, cost effective methods improving quality of products while meeting best engineering practices

i can manage site maintanace,fabrication and erraction

PCS Manager - Cost and Planner Engineer

I am civil engineer having 12 years experience.i have passed post graduate diploma in this field.

I am a BE(Electrical) Engineer having more than 12½ years of comprehensive experience (6+ years in Gulf) in Consultancy (Design) and Project Implementation involving Designing of Electrical Services, Tendering, BOQ , Estimates, Technical Specifications and in Installation, Testing and Commissioni

Welding Supervisor

Project Management Lead Zinc Copper Nickel Gold Silver Base Metals

Experienced CSA Designer

Unlimmited able seaman.,qmed oiler,SD(FH)LBMAN-NON LB EQUIP'D,Master 200 ton GT

Project planner / scheduler / cost / shutdown / turnaround /Primavera P6.2, P6.1, P6,/Oil, Gas, power, EPCM Project Control

I have experienced for road/bridge construction project as Site Enginer

Warehouse Inventory; Civil Engineering Technician;

Looking for an engineering position with the responsibility of structure research and analysis.

12 years experienced of AutoCAD 2D & 3D in Building Services (HVAC,Fire Protection, Water & Drainage)

My job objective is to obtain a career in Civil Engineering that could effectively utilize my skills in the field of construction management/supervision of civil construction projects with the following Synopsis

Computer literate on microsoftword/excel, auto cadd,sincrere to work,honest,hardworking.

Inspector Coatings QA/QC, NACE Level II Certified, SSPC Bridge Inspection Certified.

Civil Engineering, planning engineer, project management, GIS, software, modelling

I'm Civil Engineering Degree applying for Land Surveyor can operate total station,level,all survey purpose and have skill in autocad.

24 years experience in the Quality Control, inspection, supervision of pressure vessel, piping, pipeline and structural steel work. Certificated NDT level II in the UT/RT/MT/PT. Performed WPS/WQT and inclusive of Mechanical Testing witness. I have knowledge of ASME, ANSI, AWS and API code.

With an impressive diversity of significant experiences, I have developed a familiarity with several field of work such as petrochemical refinement, water treatment, environmental protection and various power generation systems

Structural inspector, Diploma in civil engineer

Plant Maint Engg

Survey Party Chief / Technician with experience with all phases of boundary,constructionand topographic surveys

Electrical Engineering diploma holder with more than 14 years experience in electrical oil and gas onshore construction field.

Factory Manager, Technical Manager

My education background was Architecture but I have experiences in various multi cultural work environment, specially in multi national Engineering Company. Project execution on fabrication and construction for Civil and Mechanical according applicable international code/ standard.

Looking to join a progressive construction organization that needs an expert in planning & Cost control follow up engineer for senior position. my experience incorporates all types of construction projects - high-rise multi-dicipline buildings, touristic villages, etc.

Over 9 years UAE experience as CADD Operator in Khatib & Alami (CEC). Responsible in preparation of Design drawings and final drafting stages of Mechanical drawings.

Expereince in Total Station surveying

learner, can work under pressure, Good in oral and written communication, perceptive details, Friendly and approachable but firm when needed, Patient and dedicated to work.

As a person who has worked as a factory trained technician on erecting and lifting equipment and is a certified crane inspector I am currently seeking employment that will further advance my knowledge in this rapidly changing industry. I am looking forward to discussing any potential opportunities.

Welding Certificates

Uncommon ability to manage multiple tasks, meets deadline, and work overtime

Diploma in instrumentation eng ,15 years experiance in oil & gas field

Constructions, Erections, Installation, Maintenance, Inspection of Static& Rotating Equipment Piping Acessories and Structural steel and Computerized Maintenance Planning’s System ,Familirize with API , ASME and ASTM standard . Understand to read P&ID, Hyd/Pneum Circuit, Isometric Drawings.

Senior Geotechnical / Civil Engoneer

■ Quality-driven professional with over 25 years of experience■ Verifiable track record for successful completion of projects in EUROPA ,SOUTH- AFRICA.RUSSIA and QATAR. ■ Business oriented; able to understand and execute broad corporate policy. ■ Implementatio

PRINCIPAL ENGINEERING GEOLOGIST-GR LEADER

Good interpersonal and communication skills. Able to work in a team as an individual. Various working experiences and willing to learn for a new things. Interested with a new experience and computer software. Discipline and be able to lead a group. Appreciation of outdoors and the e

Design Coordination, CAD Drafting , Site Supervision

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out