Resume - Sr. Geotechnical Engr, Design and Construction of Underground Structures, Mgmt o...

Misco Jobs

Resume #82719

CONTACT INFORMATION:
View contact information...

EDUCATION

PENNSYLVANIA STATE UNIVERSITY, Department of Mineral Engineering, University Park, PA
Ph.D., Mining Engineering, (Rock Mechanics), August 1985.
ACADEMY OF MINING AND METALLURGY, Department of Mining Engineering, Krakow, Poland
Master of Science in Mining Engineering, April 1976.
Honorable Mining Spade awarded by the Polish Ministry of Mining
KRAKOW POLYTECHNIC, Department of Mechanical Engineering, Krakow, Poland
Master of Science in Mechanical Engineering, August 1973.

EXPERIENCE

BECHTEL SAIC COMPANY, LLC
Senior Geotechnical Engineer
Las Vegas, NV May 2003 to present
Yucca Mountain Project – Design of 7.5 m diameter mains and shafts and 5.5 m diameter nuclear waste emplacement drifts and associated intersections under in situ, thermal, and seismic loads, development of design methodology.

- Completed several state-of-art design analyses utilizing two and three-dimensional continuous and distinct element codes by Itasca Consulting Group considering in situ, as well as thermal, and seismic loads. Planned the work scope, performed major portion of analyses and managed work of three geotechnical engineers including subcontractor to complete analyses on time and budget. This effort proved very successful as some of the planned 3D computers runs required several weeks to complete. The resulting work combined the conventional and advanced numerical modeling techniques into the documents, which address the baseline Project requirements and in which data transparency and traceability met strict requirements of NQA-1 Quality Assurance Program.
- Working as a liaison between design and construction contractor provided timely assistance to the engineering problems arising in the field, reviewed and provided input to construction specifications and field procedures. Wrote ground support specifications, supervised field implementation of procedures and associated in situ testing.
- Coordinated data collection and performed analysis of data to verify that safety and long-term stability of tunnels is maintained.
- With representatives of construction and quality assurance group performed periodical ESF tunnel and field inspections resulting in the direct feedback of inspection results to the design.
- Provided design services to the Site Project Field Engineering with timely engineering response to maintain field operations with as little interruption as possible.

THE PENNSYLVANIA STATE UNIVERSITY
Associate Professor of Mining Engineering University Park, PA August 2000 to May 2003
- Taught courses on rock mechanics including laboratory testing, bulk material handling systems, prepared seminars and workshops on underground and industrial safety issues.
- Upgraded testing equipment and modernized rock mechanics laboratory.
- Developed research in the area of rock mechanics, ground control, acoustic emission and applications of numerical modeling in rock mechanics design.
- Brought in graduate students and served as their advisor in areas of mine design and ground stability analyses.

MORRISON KNUDSEN CORP.
Lead Geotechnical Eng. and Principal Geotechnical Specialist Las Vegas, NV May 1997 to July 2000
Yucca Mountain Project – Construction of the Exploratory Studies Facility (ESF) including 8.7 km of 7.5 m diameter ramps and main tunnel, 5.5 m diameter Heated Drift facility with access drifts, and 2.6 km, 5.5 m diameter Enhanced Characterization Repository Block (ECRB) tunnel and several niches in rock strata of various quality.
- Supervised work of five geotechnical engineers and developed first version of the Design Geotechnical Database.
- Using field-acquired data, performed ESF ground support confirmation analyses, which provided evidence that in a number of instances ground support system installed was overly conservative.
- In coordination with the Construction Division performed ESF tunnel inspections (301X Areas), documented the use of materials and provided conceptual design and recommendations for the remedial ground support measures, such that the long-term stability of tunnels would be maintained.
- Performed and also reviewed a number of analyses of the future nuclear waste repository tunnels under assigned design range of thermal and seismic loading conditions.
- Performed verification studies on rock support systems required for the underground facility for the nuclear waste disposal. As a result, the established the methodology whereby field tunnel performance data were compared to those obtained from numerical analyses and performed initial calibration of numerical models.

PARSONS BRINCKERHOFF
Lead then Supervising Rock Mechanics Engineer. Houston and Dallas, TX March 1987 to February 1997
Provided rock mechanics expertise to projects in two major areas:1) geotechnical design of underground structures, and design and monitoring of field instrumentation of excavations in rocks, and 2) geotechnical expertise in design of cavern for storage of gas, crude oil, and compressed air.

Rock Mechanics
Superconducting Super Collider (SSC) Facility, Waxahachie, Texas – Construction of approximately 15 miles of 5.5 m diameter tunnel excavated in chalk, soft shale and Over-consolidated Clay, and 26 shafts of diameter 18, 21 and large elliptical 30x60 ft. Design of two large cut-and cover excavations and associated field instrumentation.
- Managed ground control analysis, numerical modeling and design of deep foundations of two large open cut-and-cover excavations resulting in moving the entire facility to another location because of identified foundation stability problems.
- Co-authored with consulting companies a set of field instrumentation specifications, part of bidding packages.
- Managed data gathering, generation of drawings as input to the Geotechnical Design Summary Reports for two sections of the Collider Tunnel - 5.5 miles tunnel length.
- Managed field measurements performed by three different subcontractors and internal measurement group on three large (30 x 60 ft) shafts excavated in soft rocks.
- Managed daily evaluations of instrumentation data and disseminated information to the excavation contractors. In two distinct cases alerted construction crews to the increasing deformation rates, the situation remedied in one case in applying additional coats of shotcrete, and in another, by completing grouting behind liner plates to stabilize the shaft collar. Attention to results of measurements triggered immediate action and was essential in avoiding potential claim.
- Designed ground support for tunnel and shafts and performed frequent field inspection and field mapping to verify that the ground support worked as planned and distributed information to all parties involved.
- Supervised field tests of rock reinforcement in shafts and tunnels (rockbolt pullout tests) to verify design input.
- Trained young engineers in the use of design software and procedures for calibrations of numerical models to assure that the field data are used to verify and to improve the design.
- With others published the results of design and modeling data such that the permanent records of design would be preserved.

Salt Mechanics
Projects for Government Strategic Petroleum Reserve (SPR) and Various Clients Operating Underground Storage Facilities in Caverns Excavated in Salt Deposits.
- Routinely interacted with clients to establish the status of each operation and subsequent procedures for the operational parameters and long-term management of multi-cavern storage sites. Provided expertise on various aspects of salt solution mining and underground storage of oil and natural gas in natural salt formations.
- Evaluated performance, calculated remaining reserves, updated field documentation and provided operational advice to the owners of brine fields, SALGEMA, Brazil, (23 caverns) and General Chemical, Canada.
- Prepared the exploratory drilling and salt testing program for The Israel Electric Corporation, Ltd. The program involved both in-situ measurements and extensive laboratory testing program to prepare salt property database for the future development of gas storage caverns at Mount Sodom, Israel.
- Using the in situ measurements, e.g., borehole logs, data on brine/gas interface changes, sonar survey data, changes of cavern bottom elevations and gas injection records, provided assessment of cavern convergence and stability for Bay Gas Storage Co. Ltd., McIntosh, Alabama (domal salt).
- Using originally-developed rock property data supplemented by thermomechanical data obtained from the literature performed the rock mechanics analysis for CONOCO Inc, for the Project involving conversion of the existing cold (-28 ºC) ammonia storage facility located in room and pillar hard rock storage cavern mined in gneiss to propane storage. The analysis led to the development of procedure for the cavern operation conversion.

Laboratory Experience
- For seven years conducted various types of experiments on physico-mechanical properties of rocks including design and improvement of several components of laboratory hardware, preparing numerous technical reports including laboratory tests and data interpretation.
- Hands-on experience with MTS testing equipment and various methods of acquisition of experimental data and computerized data processing in the laboratory as well as in the field.
Field Experience
- Tunnel inspections, management of ground support performance in shafts and tunnels, installation of underground monitoring stations and convergence measurements, installation of surface microseismic monitoring stations, used for the assessment of underground structures stability, field seismic measurements, and evaluation of slope stability.

PROFESSIONAL REGISTRATION
Professional Engineer: registered in the State of Texas, No. 81110PUBLICATIONS
38 professional publications

REFERENCES
References available upon request.

ADDITIONAL INFORMATION

U.S. Citizen. Fluent in Polish. and functional in Russian.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 3125)

Go to Search Parameters...

Brief Description

Diploma in Civil engineering, Experienced in Architectural drafting, Detailings in Autocad, Site supervisions, Experience of 7 years in similar field.

I am a civil engineering diploma holder with 8 years exp.in high rise residential and commercial buildings.

Several years of experience in CAD drafting in wood carpentry including 10 months work in Middle East, at present I work as Bulk Handling Design Engineer in a European company, part of my work is to design bulk handling system of cement cargo ship and supply vessels including loaders and unloaders,

Advanced skills for professional design in 3D (Autodesk Inventor 2009)

Master Electrician

+16 yrs of experience in EPC/PMC, TPI Quality control & in Construction Companies. Having well experiences for various stages wise Inspections involving Pressure Vessels, Storage Tanks, A/G & U/G Piping & Structural Steel Works. (ONSHORE & OFFSHORE).

Sr. project engineer

Sr. Geotechnical Engr, Design and Construction of Underground Structures, Mgmt of Multidisciplinary Projects, Numerical Modeling, Rock Mechanics, Ground Support Design, Tunnel Inspections, Hands-on Experience in Applying FLAC, FLAC3d, UDEC and 3DEC Codes in Design, Work Under NQA-1 Q A Program

Field Construction Engineer

Facilities Construction Planner and Overseer

Free! Program Director Construction Large Projects SE Asia Hotel, Embassy, High Rise, Medical, Retail, Data Facilities, Power, Roads, MEP Thailand Vietnam Korea Philippines

-Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2-D (Professional use) /

Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates indepth analytical Skill

Field Tech Mechanic

Graduate Mechanical Engineer with ASNT level-2 NDT and CNC part programming .

Qualified Civil Engineer (BE Hons) having Experience in Excecution, Planning, Billing, Monitoring. Currently working with GMR (Badrinath) Energy Ltd.as an Executive -Civil (site) on a 300 MW Hydro Power Generation Project

BE IN MECHANICAL ENGINEER. I HAVE 2 YEARS EXPERIENCE IN STRUCTURAL STEEL ERECTION

15 years in Fabrication, Construction, Installation, Hook-Up , Pre-commissioning, commissioning works of offshore Process platform, jackets,decks,bridges, modules, laying of sub-sea pipeline, Graduate Engg, Piping Engg,CSWIP3.2, B'Gas, API510, 653,570,ASNT LevelI, AUT Interpretor, IRCA Lead Auditor,

Engineer (Insulation, Painting, Fireproofing, Hvac, Scaffolding & Refractory)

Construction Engineer with core skills in Project Management, Contracts, Facilities and Value Engineering

I have a lot of years of hands on experience in the plumbing industry I can lead large groups of technicians effectively through out all phases of any construction project. I strongly believe that I can easily handle any job regardless of size

Project Planning & Coordination, Cost Control & material Procurement

Resume consist of Personal Data, Employment History & Field of experience.

To Pursue a Challenging Career in Project Management, Engineering, Construction, Oil / Gas and Power Generation related work Offshore or Onshore.

Tendering & Proposals, Estimation, Project Planning, Quantity Surveying

I have completed B.Tech in the field of Electrical Electronics Engineering at 2009 and I also completed Diploma in the same field at 2005. I have a year Experience in Government Electricity Department at 2005-2006 in Puducherry, India. I attached my CV for your kind considerat

Have a vast professional experience in road construction; Can handle high pressure with ease and open mind • have handled various critical and challenging projects from design stage to implementation stage and ensured that the projects gets implemented as per specification in stipulated time with

I am Nechifor Cristinel. I worked in power plant, refineries, oceanic platform with different operations for electrical maintenance, commissioning, construction as electrical technician , electrical inspector or electrical supervisor last time.

Process Engineer - Oil&Gas - Sulphur - Refinery

AutoCAD, ADT,3 DS Viz, MSOffice, C, C++, Unix,ProE

My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.

Engineering, cadd designer, autocad, microstation

Industrial Engineer, with more than 9 years Experience in Planning and Cost, in EPC and developmental projects, both onshore and offshore. Worked in Oil,Gas,Petroleum and Automotive field.

Highway Laboratory / QC Manager with 25 years experience in materials

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

Contract working, supervision of dam construction, geological worlks etc.

Electrician and editor of substation

BS biomedical engineering, looking for a job where i can use my knowledge and skills to overcome the problems.

I have done the project for International Power name "Feasibility of Electrical Energy Saving at HUB POWER station. and I can design different kinds s controlling circuits by using microcontroller,PLC and VFD.

A position of significant responsibility that builds upon extensive experience in construction management, expertise in managerial skills and cost analysis. Ultimate goal is to grow within and with the progressive organization that provides excellent career advancement opportunity

I AM A LAND SURVEYOR WITH CERTIFICATE QUALIFICATION.I HAVE 8 YEARS WORKING EXPERIANCES AS A LAND SURVEYOR IN CONSTRUCTION AND TITLE WORK IN MALAYSIA AND OVERSEA.

Repair & maintenance of plant & equipments used in construction, knowledge in overhauling of engines used in construction equipment, maintaining & preparing all technical reports related to plant

Over twenty-five years experience in Project/Construction Management in an Engineering Procurement and Construction Management environment, specializing in Project Controls, Planning and Scheduling. Project Controls background includes EP, EPC and EPCM.

Diploma in Mechanical/materials management with 17 Years expereice in Material Controlling and Piping looking for employment with reputed organisations.

Electro-mechanical overhead crane repairman

Estimating,Quantity Surveying, Project Planning & Project Management

Piping Designer PDS CAD

Rigger, works well at height

Basic education:College of Business Administrartion, Secondary ed. of engineering. Advanced sch: WTA ind.eng.; ISO Quality systems; Turu col of econ. int.marketing; Different schooling in marketing/sales. Lang.: ENG;RUS;FIN; EST. PC-MS Office; MS Project;ind.controllers user interf. Driv.Lic ABCE

I am a senior attending California Polytechnic University, Pomona, and I will be completing my Bachelor’s degree in Mechanical Engineering, along with a Minor in Materials Engineering Sciences, in the fall of 2009. I am currently seeking an internship or entry level position.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out