Resume - Qa/Qc Inspector

Misco Jobs

Resume #84387

CONTACT INFORMATION:
View contact information...

Experiences
Total Experience: More than Eight Years

1} Overseas Experience:

May 2008 - Conti¡K.
As Qa/Qc Inspector
Gama Qatar CO. W.L.L.
QATAR GAS 3 & 4 ONSHORE PROJECT
RLC, Qatar

Sept.2006 - May 2008
As Qa/Qc Inspector
(SAP # 70006642)
Gama Al-Moushegah Arabia Ltd.
Hawiyah Gas Treatment & Compression
Facilities Projects: B1 10-00039. Hawiyah.
Saudi Arabia

Sep 2004 - Apr 2005
As NDT Coordinator
Weld Tech Inspection Services
Sambhawang (SOME)
Singapore

Jun 2003 - Sep 2004
As NDT Coordinator (RT)
Injo Technical Services
TALA Hydroelectric Project, Sinchaka
Bhutan,

2} Offshore Experience:

Apr 2005 - Jun 2005
As NDT Coordinator (RT)
Injo Technical Services
MUT Pipeline Project. ( BHN-MNW Platform ) Mumbai.
INDIA

3} In Country Experience:

Jul. 2005 - Sept.2006
As NDT Coordinator
Injo Technical Services
NPCIL Rajasthan.
INDIA

May 2001 - Jun 2003
As NDT Coordinator
Injo Technical Services
L & T Limited
Gujarat
INDIA

Feb 2000 - Apr 2001
As Radiographer.
Project & Industrial Inspection
Kolaphur Steel LTD.
Kolaphur
INDIA

Duties and Responsibilities

„« More than 5 years working experience in power and process piping.

„« Knowledge of process and utility piping package

„« Conversant with construction activities and Plant Inspection such as NDT, Pressure test, Package preparations, Welding Procedure Qualifications, Welder Qualifications, Writing and Revising inspection test plans, Inspection Procedures, Welding Procedures, Method Statements.

„« Handle and coordinate piping/ equipment packages for oil and gas facilities.
„« Study and Evaluations on test package and preparing technical and commercial recommendation on piping/ equipment packages.
„« Involving all types of activities related to Quality Control
„« Travel to fabrication sites to monitor and coordinate with the inspectors and project team in the test package process.
„« Knowledge and fully conversant with P & ID's Isometric, As-Built, Fabrication and Lay-Out drawings. For Piping, Equipment Structural.

„« Knowledge in HSE system and policies, QA/QC requirement at site. Permit policy and several construction techniques for application at site.

„« Familiar with theoretical, practical applications of international codes and standards for vessels and tanks (API), power and process piping (ASME B31).

„« Well Familiar with NDT method such as RT, UT, PT, and MT.

„« In-charging on preparing test reports (site area)

„« Plan under safety rules & regulation for Radiographic Testing of various such as Pressure Vessels, Columns, Pipeline, Structural etc¡K,as per applicable Codes and Standards
.
„« Guide all the NDT Groups during RT, UT, MPI, DPT and PMI

„« Interpreting Radiography Films.
„« Updating all NDT Records as per requirement.

„« Method Statements Implementing necessary corrective actions for NCR, Surveillance etc. Well experience in preparing the daily and weekly reports according to client requirements & QC dossiers after the completion of projects
„« Experience in the management

Educational Qualifications
HSC Science
ASNT Level II - RT
ASNT Level II - MT
ASNT Level II - PT
B.A.R.C. RT Level - I

Software Skills
MS Office

Personal Details

Nationality: Indian

Age: 30 Years married

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 3125)

Go to Search Parameters...

Brief Description

5 yrs experience in crushing & asphalt operation,maintenance,motor control centre,inventory control,switchgear.

2D and 3D cad applications - upstream and downstream experience

12 Years experience in civil engineering, design, procurement, construction & supervising of particular relevance to the project are as follows :

10 Year Experience, 5 years Implementing SAP FI/CO and BW / BI / Netweaver Solutions for Banking, Manufacturing, Sea port industry, Maintaining SAP BW Solution for Oil and Gas Industry

Quality control, Inspection, Installation/erection of pipes and piping components, HVAc, HSE, Computer literate

I am a geologist with multidisciplinary experience, including experience in geotechnical engineering, mining, exploration, tunneling, groundwater, drilling, environmental and construction monitoring. I am a licensed monitor well driller in Nevada and OSHA Hazwoper, MSHA, SWPPP and nuclear gauge cert

DCS and instruments el.engineer.International experience.Experience in Chemical,mainly in Pulp and Paper (equipment-similar to used in Oil&Gas,Cement,Fertilizers,etc)Industry

Mechanical Engineer with expereince in AutoCAD 2000, Piping, Welding, Installation and Erection Works, Production Plainning, Supervision

Graduate Mining Engineer with MBA & First Class Mine Manager's Certificate having 22+ yrs. Hard Rock Large Highly mechanised hands on experience in Mine Operation, Drilling & Blasting, Mine Planning, Contracts Management, Waste Dump & Haul Road, Mine Dewatering

Junior project manager

Land surveying relating to boundaries, design, construction, and mapping.

12 years experience in all aspects of telecommunications. Excellent written and communication skills. Highly organized. Ability to work on multiple assignments. Excellent problem solving skills. Able to meet deadlines and schedules. Start of to completion of projects to include ordering, insta

Motivated, proven performer with a 17 year record of demonstrated success in Operations Management, Project Management, Distribution/Logistics Management, and Mechanical Engineering across multiple fields from Military Operations, Municipal Management, Telecommunications, Software Development, Call

I am a BS Mechanical Engineer who had served primarily as a Senior Fire Protection-Applications and Design Engineer for around 17 years plus and 5 years as an Occupational, Health and Safety practitioner in a petrochemical industry with a primary function as Fire Safety Engineer. My specialty profe

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

A graduate in biomedical engineering with over 5 years of experience in Medical equipment planning, procurement, design assisstance, primary level maintenance in Health Care/Hospitals and developing Management Information System of Biomedical Department

Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

I have eight years experience in major civil works projects such as,bridges and metro rail projects.

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

Construction Project Controls Manager (PMP Pending)

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

E&I Superintendent with a broad spectrum experience of electrical, instrument, and mechanical engineering acquired throughout a thirty year career. 27 years of my experience represents working directly for the Client within the O&G industry, on multi-discipline task force projects, including PMT.

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

International Project, Construction, and Contract Management

Diploma in Quantity Surveyor

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

SDS2, Xsteel, AutoCAD Steel Detailer.

ITI in Draughtship

Create learning opportunity to work in architectural firm and deal with many graphic jobs.

Project Engineer (Instrumentation & Control)

System Administrator, Server Support, Network Administrator, Desktop Support, ADS, DHCP, CCNA, MCSE

Construction Electrical and Instrumentation Engineer

Qa/Qc Inspector

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

I am a highways designer, designed more than 50 link roads, 2000 kms length all over Egypt, Yemen repuplic, & KSA.Using thelatest versions of Autodesk, Also I have a good expeience in the field of design Water & Waste Water networks

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I describe myself as Sincere and perseverance to Hard work. I had completed my Bachelor of Civil Engineering in First Class From a reputed institution in Tamil Nadu, India.

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

Geotechnical Engineer

I have recently finished my undergraduate study in Mechanical Engineering, Institute Technology of Bandung, Indonesia. I am looking forward to having a career which has strong relation with my educational background.

Working in the Kingdom of Saudi Arabia for the last 9 1/2 years. Well experienced in the design and execution of all types of HVAC systems, plumbing systems including water supply, Sewage/drainage system and Fire fighting system.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out