Resume - I have 13 years of experience in Mechanical Field as Project Manager in a projec...

Misco Jobs

Resume #84594

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:

1. Currently Working as General Manager (Tech) with a functional Post of Deputy Project Director in a R&D Organization since 2000.

Responsibilities Since 2000
i. Actively involved in coordinating the activities of Budget Preparations of our organization from 2001 to 2006 with the disbursement to different section of the organization for the development of the product. Monitored the budget distribution according to the annual plan.
ii. Coordinating the procurement & logistic management of equipment/ Heavy Long Vehicles related to our organization and monitoring the import items from Port to the destination.
iii. Assisting the Director of our department in preparation of contracts of different equipments from Technical to Budget point of view.
iv. Handling the local contracts of Equipments by negotiating with the local suppliers.
v. Involved in Preparation & Negotiation of foreign contracts & in pre-delivery inspections.
vi. Providing quarterly progress reports on the schedule of production and deliveries by preparing presentations.
vii. Acted as Deputy Management Representative (DMR) for the implementation of ISO9001.
viii. Since 2005 Acted as an over all Team Head for the Construction/ Coordinating/Provision of Technical Support Services to be provided during construction phase/ Purchase of Pressure Vessels/ Air Compressors/ HVAC Equipment/ Technical Workshops Tools/ Receiving & Forwarding the Equipment from the Airport/Port/ Installation & Commissioning of Gas Turbine Engine Assembly & Maintenance facility.
ix. Acting as a Head of PPC/ Assembly & Dynamic Balancing Sections. Planning the yearly Production of the Product on Microsoft project planner and implementing it on floor level and monitoring the progress.
x. Verifying and removing the bottle necks (if any) during planning and production phase.
xi. Managing the Production of the product with supervision of testing/balancing of High Speed Rotating Parts.
xii. Acting as an Incharge of HSE Related Activities.
xiii. Conducted HSE Internal Audits and monitoring the safety aspect of the workshop.
xiv. Conducted the Risk Analysis of the Facility and Emergency Response Procedures.
xv. Selected/Purchased/Installed the Intelligent Fire Detection System & the fire hydrant system in the facility according to the HSE Risk Assessment Procedure.
xvi. Selected and guided the staff for the Purchase & Installation of flame proof Air Conditioning units in the facility.
xvii. Also conducted and supervised a training session for the Driving/Maintenance of Heavy Transport Long Vehicles and managed the logistic activities of these 6x6, 8x8, 10x8, 12x12 & 12x12 (all Dual Tyres/ swivel axles ) Vehicles from Port to Islamabad.
xviii. Currently implementing OHSAS 18001 at the facility in progress. (Under Process Review)

2. Assistant Engineer in SABRO Air Conditioning Co Islamabad from Jan 1995 to Oct 1997

Responsibilities i. Managing the machine shop area for Tools & Die Shop.
ii. Scheduling & Planning the Daily Shop Floor Work on MS Project.
iii. Managing the Daily Maintenance Work of Workshop.
iv. Managing the minimum Inventory of the Parts.
v. Designing/ Making different plastic molding dies/ Sheet Metal machine of air conditioning parts.
vi. Planning the Production Schedule of the Dies for different Air Conditioning Parts.
vii. Monitoring the System according to ISO 9000 Standards.

3. Engineering Manager/ Coordinator in Hydro tech farms and Engg. services Rawalpindi from April 1999 to May 2000
Responsibilities i. Designing & manufacturing of Sprinkler System for irrigation purpose for 100 acres of land.

SUMMARY OF QUALIFICATIONS:
------------

MS Mechanical Engineering 1999
Course Work Completed 24 credit Hrs
NATIONAL UNIVERSITY OF SCIENCES &
TECHNOLOGY RAWALPINDI PAKISTAN
CGPA 3.438

B.E. Mechanical 1994
BALOCHISTAN UNIVERSITY OF ENGINEERING &
TECHNOLOGY KHUZDAR PAKISTAN
Agg. Percentage 74%
------------
Certification

Certificate in AutoCAD Computer Package 1994
Petroman Training Institute Islamabad

Certificate Course in Project Management 2006
CASE Institute Islamabad

Hands on Experience in Running MS Project, MS Word, Excel, Power Point etc

OBJECTIVE:
------------
Desire to work in a multi cultural Dynamic Environment to attain knowledge and to impart my role for constructive efforts.
------------

ADDITIONAL INFORMATION:
Skill Skill Level Years of Experience Last Used
AutoCAD Intermediate More than 10 years 1 month or less
MS Office
Power Point,
Word, Excel,
Publisher,
Suite Expert More than 10 years 1 month or less
MS Project Planner Expert More than 10 years 1 month or less
Primavera Beginner 1 year or less 1 month or less
Project Management Certificate Intermediate More than 5 years 1 month or less
Inventory & Maintenance Management Software Intermediate More than 2 years 3 months or less
Training on Small Gas Turbine Engine Generator Test Rig Operation Intermediate More than 2 years 1 month or less
Head/ Incharge Installation & Commissioning Assembly & Maint GTE Intermediate More than 2 years 1 month or less
Trouble Shooting & Maintenance of Test Rigs for GTE Intermediate 1 year or less 1 month or less
Logistics, Maintenance & Testing of Heavy Vehicles 12x12, 10x10, 8x8, 6x6 & HET (12x12 Dual tyres swivel axles, 80+ ton GVW) Intermediate More than 2 years More than 1 year

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 3088)

Go to Search Parameters...

Brief Description

Job potation in Kazakhstan or Russia

A certified Engineer-in-Training. Possess a Master of Engineering Degree in Civil Engineering from the University of British Columbia, Canada. Worked as an Assistant Project Manager with the California Department of Transportation.

Using FEM packages (COSMOS, ALGOR) to analyze structures and components (Stress, Stiffness, Fatigue, etc). Document drafting and review (Calculations, P&IDs, MITPs, etc.).

Diploma in Occupational Safety(OSHAS)

I am writing to introduce myself to you as a future graduate of University of Texas at Arlington. I will be graduating with a Master’s in Civil Engineering in December of 2009.

Provide structural engineering, construction management, real estate due diligence and expert witness services.

Cost control / planning engineer with 7 years exp.

Preparation and submission of quotations, Site supervision to ensure safety and timely completion

I have diversified vast professional experience in the construction industry. Have managed and worked with complex competitive challenge projects and have implemented them successfully with efficiency and quality. Expertise in Project Manger, Expertise in Checker, Expertise in Project

„X Diversified and proven experience in program management & development of infrastructure projects, including highways, rural roads, jeepable tracks, water supply, sanitation and irrigation schemes with regards to social mobilization, planning, implementation, contract administration

NUCLEAR SAFETY ENGINEER / NEBOSH INTERNATIONAL

12 years work experianc in plumbing supervisor/engineer

Microstation 2D & 3D Designer

Welding Supervisor: SSCL.DME (3years welding), WI (QA/QC), Safety qualified,21years Experience, worked with ASME, AWS, API standard in Major EPC Industries such as Onshore, Upstream ,Petro-chemicals (Offshore piping & Structures, Oil & Gas Piping, Steam Boiler Piping, HP vessels & Storage Tanks) .

Water Resources Hydrologist and Civil Construction speacialist

I am a 41 year old Civil Engineer with over 20 years of "hands on" construction experience. However, I have only had a Civil Engineering degree for 2 years.

I m land surveyor and my experience in all types of Survey work in road, Concrete structure, Buildings, Steel structure, Pipe lines, Drainage & Underground mines Survey.

Young, energetic and high qualified engineer in construction works. Well experienced especially in Marine and Civil Construction in Midle East and Asia countries such as: UAE, Vietnam, Cambodia, Singapore, and Indonesia.

MD. RIYAZ AHMED

Civil engineer

working as csu saferty officer in sabic,I am having Industrial safety diploma from annamalai university.chennai

3d/2d Autocad Operator

Autocad, Structural engineering, Drafter Design

Seek a fulfilling position that will allow me to fully contribute my knowledge and skills acquired through my work experience in my chosen profession. To gain more challenging and rewarding career.

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

Structural Engineer, Ph.D., P.E. 10 years experience in structural analysis/design of commercial and industrial buildings, and schools.

Environment & Machine Control with experience integrating PLC's, HMI's, VFD's, Networks and Radio.

A GIS/CAD specialist with 20 years experience in the field of business, urban planning, and GIS

A challenging opportunity in the management, engineering or sales field

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, onshore and offshore.

MV switchgear Panel Design Engineer

Mechanical Engineer 22 years experience design, projects

Designer/Drafter with Inventor experience.

I am an mechanical Engineer , having 7 years of experience in water and wastewater industry.

I have experience in Pre and Post Contract in Construction

Qualified Civil Engineer-total of 16 years of experince in construction industry as Structural Engineer and Design Engineer in the filed of civil engineering and post tensioning of buildings ans bridges

Over 13 years of professional experience in all facets of highway engineering covering planning, design using MXROAD software and AUTOCAD, including widening of national highways and Expressways. Experience cover route selection of Highways, geometric design, pavement design of pavements etc.

M.Tech-Control Systems Engineer with 2 years of Experience in Teaching and Projects Handling

my educational in Highway Engineering has been balanced by actual work experience. I have worked for a leading Infrastructure contractor Arabtec Construction from November 2004 to Jan.2007 and recently I¡¦m working with a leading government authority RTA as Traffic Safety Engineer

I am working as a highway engineer from past 6 years. I have over 3 years of experience with MX design software, 2 years with Inroads one year with Land Development Destok. In my past experience I involved using Indian code, dutch codes and AASHTO codes.

As a Land / Hydrographic Surveyor with 19 years experience covering a variety of harbour surveys, ocean, dredging, engineering, buildings, breakwater construction, jetty construction, roads and offshore construction surveys working with numerous projections and spheroids.

Establishment of Health, Safety and Environment Management function

Seven year experience in HVAC design and maintenance

Field and site experience, Ethylene Plant, Pipelines, Water treatments, Semiconductor tool upgrades, Refinery shut down, Jail, Clean rooms, Data center, Hospital, Schools, Substantial, Close-outs, MEP, Rotating and Static equipment, Process piping, Commissioing and startup, Schudling(P3)

¡§Being a Sr.Project Engineer - HVAC with a Post Graduation in Advanced Technological course in Refrigeration and Air Conditioning as Specialization and with hands on Seven Years experience in Project & Service Management (HVAC) .

I AM AN ELECTRICAL ENGINEER FROM PAKISTAN WORKED IN MIDDLE EAST CONSTRUCTION COMPANIES

past 10 yrs in India and Gulf countries as an Electrical Engineer in electrical field & Plant (construction) R O Plant , Batching Plant, Asphlt Plant,

I have 13 years of experience in Mechanical Field as Project Manager in a project of special equipment which is a multimillion Dollars project supervised by me from 2001 to 2004 and have experience in Budgeting, Coordination, Project Management, Planning & Scheduling, Presentation, Construction & Lo

I have directed diverse construction sites, being in charge of but of 300 people, and controlling great projects of construction

Experience in the Power, Water and Wastewater automation and process control. Designing and developing automation solutions for PLC/ SCADA systems. Project management of automation and Telemetry projects. Leading role in design, engineering, testing and commissioning

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out