Resume - Inspection of piping.pipelines,offshore structures,welders qualification,pqr,int...

Misco Jobs

Resume #85058

CONTACT INFORMATION:
View contact information...

QA/QC ENGINEER.
WELDING/MECH
BODKE SACHIN SHARADCHANDRA.

Academic Records
Diploma in Mechanical Engineering
Higher Secondary School (Science)

Summery of experience:

Performing Hold, Witness And Surveillance inspection and tests for Piping, pipelines, pressure vessels, jacket installations, sub skid installations, riser spool fabrications, internal coating by CRTS and Offshore Structures at manufacturing facilities, construction sites and on Pipe Lay barges, Drilling rigs to ensure compliance with requirement and project specification.
* Inspect material and equipment such as Pipes, valves, skids, consumables, plates, shapes as applicable to ensure compliance with requirements for proper handling, storage and protection at construction sites.
* Monitoring contractors Quality system, records such as welder performance, weld repair data, root cause analysis, corrective and preventive actions, consumables, ndt, hydro test.
* Depth knowledge of API standards,ASME B31.3,31.1,31.4,31.8,AWSD1.1
* Project expediting.
* Job completion approval, certifying and verifying jobs as per project, owner and international standards requirement.
* Witness testing activities like welder test, mechanical test, PQR, and other test.
* Third Party Inspection for mechanical, piping, structural, pressure vessels, painting, welding, lifting etc.
* Review and approve the documents, procedures, and certifying activities on behalf of owner side.
* Attending to inspections and tests, according to the approved ITP, verifying the inspection reports and validating the results.
* Attending industrial inspections on call out basis and certifying the work.

Certification & Qualification:

o CSWIP 3.1(28168)
o AWS-Certified Welding Inspector (05071591)
o ISO 9001:2000 Lead Auditor course IRCA Approved.
o ASNT Level II- Magnetic Particle, Liquid Penetrant & Radiographic Testing o Diploma in Mechanical Engineering

Attended Courses & Training record:

* Work Permit course at PDO
* Supervising Safety Course at PDO
* Fire Fighting Course at PDO
* First Aid Course at PDO
* H2S Awareness and Escape at PDO
* Scaffolding course at PDO.
* HUET(Helicopter under water escape)& Sea Survival

Career Record:

ABS Group Inc. (Consulting)
Client: SAUDI ARAMCO
* Working as a client representative on OFFSHORE BARGES, DRILLING RIGS.
* Knowledge of going jobs like Laying of pipelines, Piping, Jacket installation, Platform modifications, Riser spool fabrication, Sub sea skid installation
* Witnessing at different stages on welding, internal coating, external coating, tapewrap, nde, Hydrotesting, and Lay-up procedures.
* Monitoring the on going jobs to meet the client standards and procedures.
* Incoming material inspections such as pipes, plates and shapes as well as welding consumables. Review of material certificates, batch certificates, expiry dates and verification of mechanical, physical and chemical composition values as per project specifications
* Review and approve the documents, procedures, and certifying activities on behalf of owner side
* Witness testing activities like welder test, mechanical test, PQR, internal coating coupon by CRTS methods, Auto UT procedures.

* Inspect material and equipment such as Pipes, valves, skids, consumables, plates, shapes as applicable to ensure compliance with requirements for proper handling, storage and protection at construction sites

ABS Group Inc. (Consulting)
Client: KUWAIT OIL COMPANY.
* Incoming material inspections such as pipes, plates and shapes as well as welding consumables. Review of material certificates, batch certificates, expiry dates and verification of mechanical, physical and chemical composition values as per project specifications.
* Inspect material and equipment such as Pipes, valves, skids, consumables, plates, shapes as applicable to ensure compliance with requirements for proper handling, storage and protection at construction sites
* Inspections of piping, offsite, yard piping and irons.
* Call out basis inspections.
* Project expediting.
* Job completion approval, certifying and verifying jobs as per project, owner and international standards requirement.
* Witness testing activities like welder test, mechanical test, PQR, and other test.
* Third Party Inspection for mechanical, piping, structural, pressure vessels, painting, welding, lifting etc.
* Review and approve the documents, procedures, and certifying activities on behalf of owner side.
* Attending to inspections and tests, according to the approved ITP, verifying the inspection reports and validating the results.
* Attending industrial inspections on call out basis and certifying the work.
* Lifting items inspecting and certifying.

TEKFEN Construction & Installation Company
Ras Laffan to Mesaieed Ethane Transmission Pipeline Project Qatar
Client: Qatar Petroleum
QA/QC WELDING INSPECTOR

RESPONSIBILITIES

* RAW MATERIAL INSPECTION
* INSPECTION OF PLANT PIPING,OFFSITE,YARD PIPING,CROSS-COUNTRY PIPELINE FOR LIQUID AND GAS.
* CONTROL AND WITNESSING NDE TEST
* FIT-UP INSPECTION AS PER ISOMETRIC DRAWING
* WELD VISUAL INSPECTION (SS,LTCS, CS)
* WELDER QUALIFICATIONN TESTS
* QC RELATED ACTIVITIES DURING FABRICATION OF PIPING SUCH AS JOINT PREPARATIONS,FIT-UPS,DRAWINGS.TREACIABILITY.
* WITNESSING HYDROTEST ACTIVITIES
* PREPARATION OF PUNCH LIST
* PREPARING TEST PACKS

Consolidated Contractors International Company (CCIC)
Project: 3rd RNGL Train Project Ruwais U.A.E
June 2006 to June2007
Client: GASCO
QA/QC Inspector

RESPONSIBILITIES

* RAW MATERIAL INSPECTION
* INSPECTION OF PLANT PIPING,OFFSITE,YARD PIPING,CROSS-COUNTRY PIPELINE FOR LIQUID AND GAS
* CONTROL AND WITNESSING NDE TEST
* FIT-UP INSPECTION AS PER ISOMETRIC DRAWING
* WELD VISUAL INSPECTION (SS,LTCS, CS)
* WELDER QUALIFICATIONN TESTS
* QC RELATED ACTIVITIES DURING FABRICATION OF PIPING
* WITNESSING HYDROTEST ACTIVITIES
* PREPARATION OF PUNCH LIST
* PREPARING TEST PACKS

GALFAR Engineering & Contracting LLC OMAN
December 2003 to May 2006
CLIENT: Petroleum Development of Oman (PDO)
QA/QC WELDING INSPECTOR
RESPONSIBILITIES

* RAW MATERIAL INSPECTION
* FIT-UP INSPECTION AS PER ISOMETRIC DRAWING
* WELD VISUAL INSPECTION (SS,LTCS, CS)
* WELDER QUALIFICATIONN TESTS
* QC RELATED ACTIVITIES DURING FABRICATION OF PIPING
* WITNESSING HYDROTEST ACTIVITIES
* PREPARATION OF PUNCH LIST
* PREPARING TEST PACK

SAI SERVICE STATION
May 2001 to November 2003
QC MECHANICAL INSPECTOR
RESPONSIBILITIES

* INSPECTION FOR FABRICATION AND ERECTION OF STRUCTURAL WORK
* PREPARING MATERIAL REQUIASITON AS PER DRAWINGS
* MATERIAL IDENTIFICATION
* MARKING INSPECTION
* FIT-UP INSPECTION
* WELD VISUAL INSPECTION
* DIPENETRATING TESTING
* OFFERING FOR NDT
* HYDRO TESTING OF PIPE SPOOLS
* FINAL DIMENTIONAL INSPECTION
* DOCUMENTATION AS PER CLIENT REQUIREMENTS

METASTRIPS Ltd.
August 2000 to April 2001
WORKED AS A JUNIOR ENGINEER IN CASTING

THIS COMPANY IS A FIRST PLANT OF ZINDAL GROUP IN GOA ENGAGED IN MAFACTURE OF DIFFERENT TYPES OF BRASS STRIPES USING BATCH PRODUCTION
RESPONSIBILITIES

* MANTAINING THE REQUIRED TEMPERATURE FOR MOLTEN METAL
* MAINTAINING THE COPPER TO ZINC RATIO

FINOLEX ESSEX Ind. Ltd.
August 1999 to August 2000

PRODUCTION ENGINEER (TRAINEE)
RESPONSIBILITIES

* INCHARGE OF COMBUSTION SECTION
* KEEPING TRACE ON VARIOUS COMBUSTION PARAMETERS
* MAINTAINING THE REQUIRED TEMPERATURES OF THE DIFFERENT FURNACES
* MAN POWER HANDLING AND MAINTAINING DAY TO DAY PARAMETERS

ATLAS GEARS
February 1998 to November 1998

TRAINEE INSPECTOR
RESPONSIBILITIES

* RAW MATERIAL INSPECTION
* DIMENTIONAL INSPECTION OF FINSHED GEARS
* QUALITY DOCUMENTATION
* SETTING OF LATHES
* MAINTAINING THE PROCESS PARAMETERS

Other Skills:

o Secured Certificate in AutoCAD 2000i (Basic)
o Working knowledge in M.S-Excel, M.S-Word o Valid GCC Driving LICENSE.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 3092)

Go to Search Parameters...

Brief Description

Associate Mechanical Engineer, Plumbing Design, Applications, Process, AutoCAD

Junior Mechanical Static Equipment Engineer

Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.

Over three years of experience in the application of earth science engineer expertise in the areas of Geomechanics, computer modeling using finite element modeling tools, site stabilization, expansive soils evaluation and treatment, soil/rock mechanics laboratory testing including procedures, quali

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

D/MAN CIVIL., AutoCAD2D & 3D

Over 15 years of rich experience in Project Execution & Management, & Engineering in oil and gas.

cool,hardworking,highly flexible

PRO-E DESIGN ENGINEER

Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)

I am a fresh B.Sc Electrical & Electronic Engineer.I am a citizen of Bangladesh.

To peruse the growth enrichment of career in envious of professional with an emphasis on computer based “Planning & Construction Management”

New Graduate looking for a entry level position.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

Inspection of piping.pipelines,offshore structures,welders qualification,pqr,internal audits,quality plans review,test packs review.

Project Management, Senior Mechanical Engineer, Mechanical & Piping Supervisor, Design Engineer

10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St

BS Mech/Indust Eng. Trade qualified: Marine Eng & HD Mech. Member: "Intl Assoc Airport Executives (Can.)" & "Inst of Transportation Eng (Can.)" Extensive o/seas experience as project engineer in frontier/conflict regions.

Site COordinator having 5+ yrs of experience in Construction on High rise Towers

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Constructional Blasting, Quarry work, Coal Mines

Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.

Lead Mechanical Piping Engineer Gas and Power Plant site office testpack hydrotest pipe support punch list

Cad Engineer

Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )

Water & Wastewater Specialist searching for a challenging position overseas.

Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri

Basically I am a networking engineer. Can do any work related in computer field and can install most of the software, can assemble computer.

diploma im mechanical engineering,able to handle all kinds of equipment s

Graduate in Civil Engineering and Post Graduate in Information technology. Having over 10 years of experience in Marine Civil Construction projects internationally.

Goal-driven & result-oriented Oil and Gas Engineer with a strong mechanical, pipeline, facilities & project engineering background and over five years experience in the E&P industry.

Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact

11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor

Electronics Engieer & MBA in operations and finance with 7 years experience in automation and control projects.Good in project management,PLC,SCADA,Coding.

Excellent Knowledge in Electronic Document Management System, Promote, set up and implement a document management department and system, making it appropriate to the needs of the project through the project lifecycle, Lead the Document Management department, providing effective direction and motivat

Excellent inter personnel skills with, a professional attitude, expert trouble shooter & problem solver, a firm personality to see tough jobs as a leader and a team member.

Substation, Construction, Maint. HV work

Oil & Gas, Petrochemical Industry Specialist

I am looking for a job as Technical Manager / Supervisor for heavy machines worldwide

All aspects of mineral processing plant construction

Maintenance experience.

An eight year experience including three year gulf experience, Abu Dhabi, UAE. Extensive experience in structural steel (fabrication, materials, drawings…etc). Diploma in Project management (PRMG) from The American University in Cairo, Egypt.

Senior Designer - Instrumentation - Electrical - Controls - Power

Quantity Surveyor

Management Representative (MR) for Quality Management System as Per ISO 9001

High - educated, experienced construction engineer. 10 years construction experience in civil building, high voltage electric lines, substations. Company management, team management, consulting.

B.Sc Engineering (Metallurgical), IRCA Registered Lead QMS Auditor, qualified EMS Auditor, Certified Quality Manager, Chartered Engineer (I) with over 30 plus experience in quality management field in oil and gas industry, having worked oversees since 1992 in Japan, Middle East and South East Asia.

Looking for senior position of project engineer electrical substation and T & D System, have MS from US in Electrical engineering and have over 17 yrs experiance of HV Substation Electrical field.

Indian, Chartered Civil Engr. Status, Aged 58, Civil Engg. Graduate (1970) With PG Dip in Management - 34 yrs in Engg / Construction out of which 25 yrs in O&G. Totally 21 yrs with Consultants / Clients & 14 yrs. with Contractors including 20 Yrs. outside India, in Nigeria, Oman, Kuwait & Qatar

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out