Resume - Commissioned 500/220/132/11/0.42kV substations and 220MW,175MW combined cycle po...

Misco Jobs

Resume #85137

CONTACT INFORMATION:
View contact information...

Electrical Engineer(commissioning)

OBJECTIVE
To work in a dynamic and progressive environment where I can share my education and knowledge and enhance my skills, which will provide me an opportunity for growth and development in the vast field of Electrical Engineering.

WORK EXPERIENCE
1) Al-Saleh LLC Muscat (Oman)
Designation: R&D Engineer
2) Siemens Pakistan Limited, Karachi Currently Employed since 2008
Designation: Commissioning Engineer
Job Description:
Technical Expertise:
* Projects Executed
Testing and Commissioning of 500/220/132 kV Ghakkhar
Testing and Commissioning of 220 kV Honda Atlas Grid Station
Testing and Commissioning of 220 kV Doosan Grid Station.
I have got hands on experience on the following:
* Testing of control and protection schemes for Line, Transformer and Coupler bays.
* Testing of Circuit Breaker and Isolators operations and Interlocking checks.
* Testing of Breaker failure protection.
* CT Secondary and Primary Injection.
* CT Ratio, Polarity and Saturation Test, Trip logics.
* Trafo Stability Test, Trafo Differential Test.
* Bus bar Stability Test, Bus bar Differential Test.
* Synchronizing scheme Check, Restricted Earth Fault.
* VT ratio check, VT Circuit Check, DC Failure Alarm and Annunciations Check.
* Trip circuit supervision scheme Test.
* Worked on Bay Control Unit
* Have good knowledge of Distance protection, O/C, Earth fault protection, Breaker failure, line differential, and famillar with all the Relays related to Electrical protection

* COMMISSIONING of 11kV and 0.4kV SYSTEM
Commissioning of 11KV switch gears, 11KV switch gear interlocking, 11/0.4kV Distribution Transformer, 11kV Capacitor Banks, 400V Switchgears, 400V AC DB, 400V PFIP and various 400V motors.

* MEGGER AND HIGH VOLATGE TEST
Megering and HI-Pot testing of HT cables and bus bars
* BATTERY BANKS AND CHARGER
Commissioning of 220VDC, 110VDC and 48VDC Chargers, DC DB and Battery Bank. Load Discharge Test for Battery Bank

INTERNSHIPS:
Karachi Shipyard and Engineering Works ltd, Pakistan (June 2006)
* Reporting to the Chief Electrical Engineer about maintenance of Electric Cranes, Electromagnets and Electric Furnaces
* Responsible for report submission based on work experience in Power Generation and Maintenance Department.
* Observed operation of generating units under loaded and un-loaded conditions.
EDUCATIONAL HISTORY
Achievements Year Institution Scores
* B.E. (Electrical Engineering)
Karachi, Pakistan. Jan2004 - Dec2007 NED University of Engineering and Technology First Division

* H.S.C (Pre Engineering)
Bannu, Pakistan. 2001 - 2003 Govt. Degree college Bannu Grade A

* S.S.C (Science)
Domel, Pakistan. 1999 - 2001 Muslim Model School and College Domel Grade A

COURSES & ACCREDITATION
* Programmable logic Controller.

ACADEMIC PROJECT
"Servo Control System"(Linear Control System Based)

COMPUTER SKILLS
* Electronic Workbench MultiSim
* Matlab
* MS Windows 9x/XP * MS Office
* Adobe Photoshop

PERSONAL BIODATA
Date of birth: 29th of March, 1985.
Age: 24 yrs
Place of Birth: Domel Pakistan.
Marital Status: Single.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 3125)

Go to Search Parameters...

Brief Description

To approve Method statements, Quality procedure, Inspection test plan as per specification / Vendors specification and co-ordinate with clients for approve Ensure all inspections are carried out as per ITP at work don

currently located in Milan, Italy. I have all documents to work here in Italy. I am looking for job related to CAD, MICROSTATION, FRAMEWORKS. I have good experience in CIVIL RCC, STEEL, Underground drafting & detailing. I have good experience in 3D Modelling using PDS, FRAMEWORKS.

Possess ten (10) years of experience in design of various civil engineering facilities providing shelter and access to fellow humans in Pakistan, Yemen and Oman.

Planning Engineer/ cost controller using Primavera P3 Construction Experience as Project engineer

Project, Construction Management, Contract Administration, Supervision & Site Control, Quantity Surveying (QS), Cost Estimation, Site/store co-ordination & Control, Project Planning, monitoring & review of progress, Site Survey & estimation of quantities.

Newly Graduated Civil Engineer with over experience

Electrical Engineer (Specialized in tendering, BOQs, RFQ, etc)

Certified Prince2 practitioner with experince in managing Construction Projects. Bsc.Quantity Surveying Experinced in quantity surveying practice and CAD technology skills and Microsoft Office Packages Particularly Excel And MS project

Intensive experience in heavy equipment workshop management,in service at Caterpillar agency and in client requests for repairs and implementation of warraty.Awarded "Man Of The Year in 1997 by Caterpillar Switzerland.

To obtain an entry level position in the computer drafting and design field utilizing my education and skills with an expanding and dynamic company.

OBJECTIVE: A position as Mechanical Engineer (Basic/Principle Design, Estimation, Tendering & Procurement)

BE-Mechanical Engineering;ASNT Level I &II in RT,UT,MPT &DPT;Auto Cad;Experienced in Fabrication and Erection of heavy structure , piping,vessel and Slag blasting & painting.

I am a graduate with Bachelor Degree in Mechanical Engineering from the University of Madras, India. I am having more than2 years Gulf experience in Air–Conditioning and Ventilation (HVAC), Plumbing, Drainage and Fire Fighting, Chilled water Piping Design & Installations. I also count same years o

Construction & oil and gas & auditing

Results-driven Civil Construction Management Professional with extensive senior-level experience in the Supervision, Quality management, planning & programming, design and successful completion of large-scale civil and structural engineering projects worldwide.

Free! Seeking a challenging project management position with a successful heavy civil construction firm. Preferably, Infrastructure Projects in excess of $100 Million.

Graduate in Mechanical Engineering , Certified Welding Inspector AWS CWI, ASNT Level II RT, UT, MT, PT, 10 years experience in welding inspection of Power boiler, pressure vessels, heat exchanger, Power and process boiler piping fabrication. Able to prepare WPS, PQR

Associate Member: (NIOB) Nigeria Institute of Building (0001397) 2005,,NY.S.C. National Youth Service Corps. 2002- 2003,Higher National Diploma:: Building Const. Technology@Fed. Poly. Nekede Owerri 2000 - 2001

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

FIELD PIPING ENGINEER - OIL AND GAS ONSHORE / OFFSHORE LEAD PIPING DESIGNER, CHECKER

I am looking for a project amanger post according to detaied CV I can handle all phases og project

Electrical Estimation Engineer with Two years and Four months of experience

A highly accomplished and enterprising SENIOR PROFESSIONAL with mature expertise in engineering and construction management, project management, facilities engineering, business and project development

Planning, Monitoring, Scheduling, Costing, Budgeting and Estimation Civil works

Project Management

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

Professionally qualified and highly experienced mechanical engineer offering 25 years experience in managing electro-mechanical projects and operations & maintenance of real estate properties.

c,matlab,ADS, INTELLISUITE

ARCHITECTURAL TECHNICIAN

MEP Coordinator

applicantI have experience in site supervision and to manage a team of worker. I also have experience in inspection of works, topographical surveys with total station, GPS and automatic level a very good knowledge of AutoCAD and Easysurf. Now I’m working with private company as Engineering Tec

I have been working in design and construction of instrumentation and control systems for pipelines and industrial plants (oil & gas), for more than ten years. My experience includes specification, design, configuration, and programming of complex control systems with DCS, PLC, and SCADA systems.

Istrumantation, electrical construction works, autocad, people management,safety officer, electrical/electronics technician.

Electrical, Instrumentation and Control Disciplines

Electrical Engineer ( project & design) with 15 years of experience with MNC in India, Japan , Middle East for Oil and Gas, Petrochemical, Chemical, Power.

Commissioned 500/220/132/11/0.42kV substations and 220MW,175MW combined cycle power plants

Over thirty years of experience in engineering, covering all EPC project phases - preparation of FEED packages, EDS, detailed engineering and construction supervision. Projects include SAGD, upgraders, refineries, chemical plants, product storage facilities, utilities, oil & gas

Mechanical Designer/Drafter with 5 years’ experience in design and mechanical drafting, over 5000 hours using Pro/E Wildfire, Auto Cad and Master Cam programs. 20 years experience in all techniques of welding. A.A.S. Drafting Cad/Cam Design, Certificate in drafting, welding,computer programming

Seeking a challenging career in the related field with a good commotion skill in Architectural Designing development and space planning development

Confident with Auto CAD 2000-2008

Diploma In Construction Eng. Working as a Team Leader for Aluminium Fabrication Contractor in Dubai. Capable of Handling Challenges. Looking for Carrying myself Ahead from Team Leader to Design Cordinator or Assistant Design Head.

i am precast civil engineer 3 year exp. in dubai

Please accept my resume as an introduction to the skills and abilities I can offer you. My entire career has been dedicated to supporting internal and external customers. My core goal is to create a positive impact with the organizations I have been affiliated with.

Bachelor of Engineering Grade : Grade A/1st Class Field of Study : Production Engineering Aggregate: 66.30% Institute / University : Anna university, Government College Of Technology, Located In : Coimbatore, Tamil nadu, India. Graduation : April 2005

i'm chemical engineer working presently with TOYO ENGG. INDIA LTD. attached pls. find my resume.

Education : Diploma in Mechanical Engineering.I am having 19 years experience (11 years in Gulf + 8 years in India) in the field of piping works in Oil & Gas, Refinery, crude oil gathering station, Gas recovery flash gas compressor, Heavy industry, Gas utilization.

Civil Engineer (N.E.D University)

i m land surveyor having 7 years experience in kuwait.

I/E Designer, 28 years experience in the petrochemical industry along the Gulf Coast and in the oil industry in Alaska. Worked onsite at client facilities and in-house. Extensive use of Autocad and MS Office. Experienced in working with other disciplines, clients, vendors & construction. Will travel

Safety Officer with more than 5 years of experince in oil and gas and constructions

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out