Resume - Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Ind...

Misco Jobs

Resume #85272

CONTACT INFORMATION:
View contact information...

SUMMARY
Project Manager and Design Engineer with more than 20 years experience in gas turbine and aerospace industry. Solution Analyst in Software Company.

WORK EXPERIENCE

2008 – Present: HPI, llc, Houston USA
Project Manager
Power plants with gas turbine engines development, erection, repair and rehabilitation.
Project manager for mechanical part Karkh Power plant rehabilitation, Baghdad, Iraq contract with USA military administration (USACE). Participate in EPC project between Canadian and Ghana government, design and build cogeneration power plant in Ghana.

2007 – 2008: MXI Technology Ltd, Ottawa
Solution Analyst
Software development for aircrafts maintenance control.
Participate in software development for A330, A380 and business jets.

2002 – 2007: Magellan Aerospace Corp (Orenda Division, Advanced Materials, and Engineering Solutions Department), Mississauga, Ontario
Project Manager / Design Engineer
Project management
Management of the project world's first steam-injected gas turbine engine with water recovering system based on OGT2500 (Aquarius technology).
Duties and responsibilities:
* planning, directing, and managing assigned projects;
* preparation of initial technical requirements for all equipment ranges;
* ensuring that objectives were accomplished in accordance with outlined priorities;
* analyzing results of operations to discover more efficient ways of resource utilization;
* delegating responsibilities;
* developing time schedules;
* negotiating contracts;
* negotiating with customer and power plant equipment vendors;
* reviewing project status reports during each operational phase;
* preparing weekly project status reports for management.
Design Engineer (Bio-fuel project)
Gas turbine power and bio-fuel handling units design for industrial application. Control system algorithm development, equipment selection for OGT2500 Bio Fuel Power Unit. Test programs development. Heat balance calculations for different types gas turbine units for bio-fuel application. ORENDA OGT2500 power generation and fuel handling modules commissioning at ORENDA Mississauga test facility.

Design Engineer (Repair technologies development)
Repair technology development for aircraft gas turbine engines F404, J85, T53, and Allison 504. Tools for turbine parts repair design, drafting, fabrication. T-53 gas turbine engine modification for industrial applications, work with Magellan partner company Mashproekt, Ukraine. Equipment specification for gas turbine parts testing and evaluation development. Equipment selection, ordering, negotiates with vendors.

1990 – 2001: Mashproekt, Nikolaev, Ukraine.
Project Manager Deputy / Design Engineer
The management and supervision of development, design, manufacturing, and testing of Aquarius (steam injected gas turbine with water recovery system) power units. The power output of these units is 5 MW, 16 MW and 25 MW and efficiency 43%…45% ISO conditions.

Design Engineer in COGEN Project Management Group
In COGEN Project Management Group responsible for the COGEN power plant equipment specification preparation, equipment selection, and negotiations with equipment suppliers.
Participation in SPE Mashproekt UGT110 (power output 110 MW) gas turbine design, manufacturing, and development tests.

Design Engineer in turbine department
Gas turbine design Department (gas turbine hot section design: high pressure turbines, low pressure turbines and power turbines). Participation in UGT 2500, UGT 15000 and UGT 25000 gas turbine engines development, design, and manufacturing.

1987– 1990: Gasprom Co, Russia.
Gas Pumping Units Equipment Repair and Overhaul field Engineer.
Team leader maintenance, repair, and overhaul various gas turbines and other gas pumping equipment.

EDUCATION
* 1981 - 1987 - Ukrainian State Shipbuilding Technical University in Nikolaev, Ukraine (former Shipbuilding Institute), Mechanical Engineering Department.
Master Degree in Mechanical Engineering, Mechanical Engineer.
Specialist in marine propulsions with gas turbine engines.
* 1997 - Course of using CAD/CAM CGTech technologies at Selicongraphic's European education center in the Theale, UK.
* 2003 - Course practical application Unigraphics NX, Siemens PLM Software (former UGS) Education Centre, Toronto, Canada
* 2003 - Course design application Unigraphics NX, Education Centre, Chicago, Illinois, USA
* 2004 - Course free form modeling Unigraphics NX, Education Centre, Toronto, Canada
* 2004 - Course drafting essentials Unigraphics NX, Education Centre, Cincinnati, Ohio, USA

TECHNICAL SKILLS
Software Applications:
* Unigraphics NX
* AutoCAD
* MS Office Suite
* MS Project
* MS Visio
* Lotus Notes
* Rational ClearQuest
Operating Systems
* Windows 95/98/NT/2000, Windows XP:

MEMBERSHIPS
Member of the ASME (American Society of Mechanical Engineers)

PUBLICATIONS
* ASME TURBO EXPO 2001, June 4 - 7, New Orleans, Louisiana, USA, 2001-GT-0111
Design, development, and testing of a gas turbine steam injection and water recovery system
* ADVANCED AEROTHERMAL & COMBUSTION TECHNOLOGIES IN ENERGY AND POWER SYSTEMS, US – UKRAINE WORKSHOP, KIEV, UKRAINE, 2001
The "Aquarius" technology: electricity production; power and heat generation; environmentally clean exhaust; all-the-year-round operation, http://www.triacon.org/Events/WS2001/main_en.htm

LANGUAGES
* English
* Russian

SECURITY CLEARANCE:
* Yes (Enhanced)

REFERENCES:
Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 3092)

Go to Search Parameters...

Brief Description

Engineering: Civil Structural Mining and Project Management

Computer skills (MS office/internet), blue print reading and interpretation, excellent communication skills, well organized and willing to work overtime to meet deadlines. Qualifications National Crafts Certificate in Electrical Power Engineering and Advanced Diploma in Construction Eng. Technology

Wiring Tech

Senior Civil Structural PDMS AutoCAD Designer

Planning Engr. + primavera + MS Project + AutoCAD

Dedicated material control and procurement specialist for piping, electrical and structural materials in the energy, oil and gas industries. Proficient in timely requisitioning of inventory items with outstanding verbal and written communication skills.

Qualified for Piping Stress Analysis Static and Dynamic knowledge with CAERSAR II Stress analysis software certification by COADE, ASME B31.3 Piping Process Standard knowledge, International codes & Standards such as ASME, ASTM, API, ANSI, DIN etc, Piping Engineering knowledge,

48 years old white male and currently employed at Esayidi Further Education and Training (F.E.T.) College, Port Shepstone Campus, as a Technical trainer, Lecturer, Assessor and Moderator, DTTC Assessor and Moderator.

Design of Horizontal, Vertical Road alignments, at grade intersections, at grade separators and highway components as per site conditions in line with the IRC, ASHOO,BIS and international standards, using MOSS (MX Road) & Auto cad Software’s.

Civil Engineer experienced in buildings, Roads and Power projects.

BS Mechanical Engineer with 7 years experience, familiar with ASME, API, ANSI, TEMA, etc. specifications and industry standards in mining, petro-chem and power plants. Strong background in Piping. Single, willing to relocate, fluent in Spanish & understand Bahasa Indonesian.

Senior Instrumentation and Controls Technician

Heavy equipments mechanical engineer

I’ve been working in overseas since 1995 with experience on EPC (oil/gas/petrochem/power/desalination plant, etc.), piping field engineering and construction management/supervision (coordinator, construction, turnaround, tie-ins, revamp/maintenance, field engineering, punch list, test pack, spool ch

Instrument supervisor / technician v exp construction commissioning start up HSE

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

Mechanical engineer striving for excellence and challenges

Changing career to obtain a challenging acad drafter position in which creativity, technical skills, and educational preparation can be utilized and enhance.

Over 18 years' experience in design and construction of water & wastewater treatment projects - industrial & municipal

Highly organized, self-motivated individual with experience in the Automotive Electronic Equipments maintenance, repair and troubleshooting, Computer and Data/Voice Communication industry.

Civil Engineer for Construction/Excution, Billing, Analysis of Rate, Quantity Survey

Creative and reliable engineering Personal with a strong technical backgrounds including data handling, maintenance and servicing of equipment and machines.

Seeking Construction employment opportunities.

can survey construction, road, site development, building, pipeline, airways and can established control.

B. Sc. in Civil Engineering & MBA in Riyadh, Saudi Arabia

Over 7 years of experiences in Project Planning, Project Control, Project Coordination for Oil and Gas Projects, Refinery and Gas Turbine Power Plant ,B.E in Civil Eng.,Certificate course in Primavera Ver . P3, Pe/c Ver.3.5 and Pe/c Ver 5.0,MS Project and MS office applications,AutoCAD 2000

Experience in software is the leading developer of computer-assisted thinking programs for businesses in the field of project planning, problem solving, and negotiating.

Diploma Information Technology-lay utp cable and fiber optics cable,terminate utp cable and splice fiber optics cable,install wireless

I have Bachelors Degree in Mechanical Engineering with 18 years Experience India, Middle East and African countries in Oil, Gas sector both onshore and offshore fields.

Senior EPC/EPCM Manager with +30 years experience of successful multi-disciplined project & program management; successfully organizing, managing and directing large mining, heavy civil and infrastructure projects

Certificate in Project Management Course from IIT Delhi B.E (Mechanical) 2000, Diploma: D.M.E. 1997, Mumbai BoardPrimavera, CEASARII (Ver. 4.4)

BE electrical, Micro Station, AutoCAD and MS Office

Experience includes project management, construction management, geotechnical engineering, engineering design and resident engineering construction observation.

B.S. Mechanical Engineer. Member of Mechanical Engineer’s Chamber / TURKEY; Qualifications : Bachelor of Science in Mechanical Engineering (University of Anadolu / TURKEY 1980-1984) , Certified Welding Inspector ( CSWIP 3.1, Cert No: 37291, E

Project Interface Manager, Stategy Planning, Engineering/Projects Development/Management/Controls

Having worked in three countries in industries such as: Printing, Tourism, Piping Fabrication, Oil and Gas construction and erection projects

Job Title : Service, Erection and Maintenance Engineer - Maintenance & Trouble shooting skills - Installation, Repair, commissioning and STart Up of Boilers. Stron Communication Skills. Training Courses

I have a Masters degree in Civil Engineering. I am seeking a job in the industry to apply skills obtained throughout my training and thereby improve my own abilities and achieve better understanding of the diverse field of Civil Engineering.

Application of specialized softwares for engineering design with opportunities in project leadership

Looks forward to a challenging career as a Engineer in Oil, Gas, Petrochemical, Fertilizer, Power, Nuclear and Chemical related heavy process equipments fabrication, machining and Construction industries. In depth knowledge in Construction industries and process industries.

Civil engineer who is familiar with all aspects of concrete and steel structures, design and analysis , high rise building , finite-elements method and last software packages in structural analysis. Executive sector of the great projects for water distribution and its related pumping stations

Career Objective I am looking forward to develop my academic background and career related experience in Construction field.

Ingegnere Meccanico, laureato a Pisa con Master of Science in Metallurgical and Materials Engineering dalla Colorado School of Mines, Golden, CO USA. Italiano come madre lingua, ottimo Inglese, Francese, Tedesco e Spagnolo colloquial

University rate and degree of the master on a specialty «Construction of mines and underground building», specialization – underground - construction. Participated in development and a substantiation of a new way of construction of some sites of the underground in Donetsk region.

Structural Design engineer M. Tech(Structures)having more than 4.0 years experience of designing RCC and Steel Building. Having knowledge of Structural software STAAD PRO etc. Having exposure of Indian & USA based codes like IBC-2000. Having experience in pre-engineering bldg & conventional.

To utilize my acquired background in the field of Electrical Engineering as well as my higher education in Engineering Management and to perform quality work in a professional career related to my technical skills

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction,

Instrument & DCS Specifications datasheets, I/O list preparation, JB,Cable schedule, Logic Diagrams, Wiring Diagrams, Cable and Tray routing, hook-up Drawings, Installation Standards, MTO, Technical Procurement assistance, DCS Detailed Engineering, Project, construction and commissioning activitie

certified QC inspector with 4 plus years of experience, handling all stage inspections of piping, vessals,structruals. welding inspection , familiar with international codes and standards

Manager of Projects; Operations manager for OSV,DSV AHTS etc. Construction manager;Workshop manager

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out