Resume - CSWIP 3.2,BGas Grade 2,ASNT Level 3 in RT,MT Level 2 in RT,PT,MT,UT

Misco Jobs

Resume #85499

CONTACT INFORMATION:
View contact information...

Technical qualifications:
DIPLOMA IN MECHANICAL ENGINEERING – From Directorate of Technical Education year 1997
First Class with Honors (83.0% of marks aggregate)

Professional qualifications:
CSWIP 3.2, SENIOR Welding Inspector – TWI, UK / Certificate No. 24241
CSWIP 3.1, Welding Inspector - TWI, UK / Certificate No. 23307
BGAS Grade – 2, Painting Inspector – TWI, UK / CERTIFICATE No. 26004
ASNT LEVEL III – Radiography Testing / Certificate No. 181938
ASNT LEVEL III – Magnetic particle Testing / Certificate No. 181938
ASNT Level II – Ultrasonic Testing
ASNT Level II – Radiography Testing
ASNT Level II – Magnetic particle Testing
ASNT Level II – Penetrant Testing
ASNT Level II – Eddy current Testing

Lead auditor certification
IRCA approved lead auditor for ISO 9000: 2000
Certificate no. LAC/1201, valid up to 06.10.2011
Other information:
1. BARC Level II in Radiation Protection and Safety trained and certified by Bhaba Atomic Research Centre, Mumbai, India.

2. Diploma in quality engineering certified by Bharathidhasan University, Trichy for Calibration and Quality Control techniques.

3. Trained by GPIC, Bahrain for Thermal Imaging Techniques for ceramic-coated lining, thermal insulated tanks and vessels.

4. Trained by Larsen & Toubro Ltd (Heavy Engineering Division). Practical application of Time of Flight Diffraction techniques on Pressure vessels.

5. Trained by Advanced Institute, Italy on practical application of SAFT on Post Hydro static tested Heavy pressure vessels

Safety courses for onshore:
1. Trained by Bahrain Petroleum Company about SAFETY on Working in Confined Spaces
2. Trained and authorized by BAPCO for as a AUTHORIZED PERMIT RECEIVER
Safety courses for onshore in PDO, Oman:
1. Basic First Aid Training
2. Basic Fire Fighting
3. H2S Awareness And Apparatus Wearer
4. STOP – Safety training and observation program conducted by PDO
Safety courses for offshore - conducted by ETDC, Abu Dhabi
1. Offshore Survival Training & Helicopter Underwater Escape Training (H.U.E.T)
2. Basic First Aid Training
3. Basic Fire Fighting
4. H2S Awareness And Apparatus Wearer
5. Personal Safety And Social Responsibility
Offshore safety courses conducted by SMTC GLOBAL, MALAYSIA
OPITO approved BOSET for tropical environment with EBS (emergency breathing system)

Knowledge in international codes & standards:
ASME Sec- V, VIII Div I & II, IX, ANSI B31.3, B31.1, B31.4, AWS D1.1 and API – 1104
Computer skills:
Operating systems: MICROSOFT XP™, Vista ™, DOS and UNIX
software's: AUTOCAD 2007, MS-OFFICE 2007
Additional: browsing of internet and e-mail

TOTAL EXPERIENCE: 12.1 YEARS (Onshore and Off-Shore)

EXPERIENCE SUMMARY (Start from the Recent):
February 2009 to Till Date: Velosi, Oman
Designation: Multi discipline QC inspector (Welding &NDT)
Client: As a client representative
Project: Qarn Alam steam Facilities, Qarn Alam, Oman
Job Description: NDT Inspector and Coordinator
Responsibilities handled:
1. Interpretation of RT films as per AWS D1.1, ASME Sev VIII Div I, B31.3 & API1104
2. witnessing of Welder and procedure qualification
3. Procedure review for automatic ultrasonic testing and other NDT, HT & PWHT Procedure.

June 2008 to December 2008: PTAS – ITS SDN. BHD, Brunei Darussalam
Designation: Senior QC Inspector (Welding and Coating)
Client: Brunei shell petroleum, Brunei Darussalam
Project: AMPA 09, Champion 07, Iron duke and mekpie-2 (campaign 2008)
Job Description: Fabrication, maintenance and Installation of offshore facilities
Responsibilities handled:
1. Installation, Replacement and monitoring of pressure relief valves and ESD valves. This includes hot bolting also.
2. Inspection on welding, fabrication, dimension check of spools which is being made in onboard.
3. Maintenance of damaged offshore structures by lamellar tearing detection and repairing.
4. Interpretation of radiographic films as per ASME B 31.3, AWS D1.1, API 1104.
5. Inspection and testing of paint, blasting application on repair and new installation piping and structures.
6. Inspection and monitoring of offshore structural repairs especially lamellar teared beam structures.
7. Inspection of new collar bracket, frames, tubular structure during maintenance and expansion of facility.
8. Inspection and monitoring of duplex SS on the deck piping fabrication and installation.
9. Monitoring pickling and passivation on fabricated spools.
10. Witnessing of ultrasonic testing and magnetic particle inspection during maintenance.

December 2007 to May 2008: OCEANEERING L.L.C
Designation: QC Inspector (Welding and Coating)
Client: MAERSK OIL, QATAR
Project: Block-5, Al-Shaheen Field, Qatar
Job Description: Fabrication & Installation sub sea riser and Tie-in spools
Responsibilities handled:
1. Prior check before fabrication of spools, riser with various diameters and coordinating NDT activities.
2. Inspection on welding, fabrication, dimension check of spools which is being made in onboard.
3. Interpretation of radiographic films as per MITS-80 & API 1104.
4. Monitoring of holiday detection on wrapped field joint, and Field joint coat repairing glass flake epoxy.
5. Inspection of Coating, wrapping and splash zone coating (Interzone).

OCTOBER 2007: OCEANEERING L.L.C
Designation: QC Inspector (Coating)
Client: QATAR GAS II, QATAR
Project: QATAR GAS, RASLAFFAN NORTH FIELD, QATAR
Job Description: Laying Sub sea pipe line for Between Wellheads
Responsibilities handled:
1. Inspection of received submarine pipe line material with high density concrete coating
2. Inspection Prior to blasting, inspection for salt contamination tests carried out.
3. Inspection performed at various stages from gird blasting, induction heating, FBE coating and adhesive bond test.
4. Inspections of HDPF foam filling and regular density tests.

JULY 2007 to SEPTEMBER 2007: OCEANEERING L.L.C
Designation: QC Inspector (Welding and Coating)
Client: MAERSK OIL, QATAR
Project: 6030 - BLOCK 5 EXPANSIONS, AL SHAHEEN FIELD, QATAR
Job Description: Laying various diameter Sub sea pipe line between offshore installation
Responsibilities handled:
1. Inspection of material receiving for submarine pipe line material with concrete coating.
2. Inspection performed at various stages form fit up, automatic welding monitoring, and visual inspection.
3. Monitoring of Holiday detection on the wrapped field joint.
4. Inspections of cold wrapping followed by marine mastic fill (dope).

December 2006 to JULY 2007: PETRORabigh Petrochemicals L.L.C
Designation: Project Inspector (client insp - Welding, Insulation and Painting)
Client: PETRORabigh (Sumitomo chemicals, Japan & Saudi Aramco JV)
Project: PC-2 Monomer Project, Rabigh, Kingdom of Saudi Arabia.
Responsibilities handled:
1. Review of radiographed films as per ASME Sec 31.3 and ASME Sec IX.
2. Qualifying of welders and welding operators according to the ASME Sec IX and AWS D1.1.
3. Initial Qualifying and certifying for critical coating personnel according to the ARAMCO project specification.
4. Surveillance and monitoring on the various stages of substrate preparation during and after blasting and painting according to requirements of the ARAMCO Protective Coating System (APCS).
5. Implementation of Special welding process like STT (surface tension transfer – LINCOLN) on the project fabrication facility.
6. Trouble shooting on fire proofing of galvanized steel structurals.
7. Trouble shooting and monitoring of ZINC rich epoxy primers and phenolic resin based primers for Immersion services for High pressure piping and Tanks (piping services for catalyst, caustic soda, chilled water line, High pressure steam, Mono Ethylene Glycol (MEG), Propylene Oxide (P.O)).
8. Regular monitoring of abrasive material sampling inspection and surface contamination testing.
9. RTRP and FRP piping handled, from the preparation, assembling, bonding, curing and hydrostatic testing.
10. Inspection of insulation on tanks, pressure vessels and piping(experienced on hot, cold, acoustic and personal protection insulations)
11. Inspection firestop installation on power cables on road crossing and PIB installation areas (control room and substation).

Dec 2005 to July 2006: JGC Middle East FZE, Bahrain
Designation: Welding & Painting Inspector
Client: Dolphin Energy, Raslaffan, Qatar
Project: Dolphin – Upstream and Compression Facilities Project, Qatar.

Responsibilities handled:
1. Qualification of welders and welding operators for GMAW, FCAW as per the ASME Sec IX.
2. Monitoring of painting and blasting activity on the prefabricated spooling system (piping and structures, including stainless steel piping).
3. Monitoring of Stainless cleaning by pickling and passivation on rusted pipes and fittings.
4. Witnessing of Hydro static testing on fabricates spools.
5. Interpretation Radiographic films as per ASME B31.3: 2004
6. Witnessing of Reinforcement pad pneumatic leak testing on the fabricated spools.
7. Inspection of galvanized surfaces before, and after galvanizing prior to painting (used for firewater line).
8. Surveillance activity on the welder's performance and welding operator performance during production welding.

Oct 2004 to Nov 2005: PIH Services ME Ltd, Bahrain Branch
Designation: Piping / Welding Inspector
Client: Various clients in Bahrain
Project: Various projects
Responsibilities handled:
1. Performing of Thermal imaging techniques on insulated furnace walls, ceramic coated roofs and thermal insulated tanks (FLIR system was used).
2. Inspection of heat exchanger user for desalination plant for tube leak test by bubbler technique.
3. Provided assistance to the acoustic emission testing to the hydrogen service vessels, and ammonium storage tanks used for the fertilizer production (urea) (physical acoustics UK ltd, London).
4. Inspection during water jet cleaning on inside the pressure vessels and steam generators at the time of shutdown (GPIC Turnaround 2005).
5. Inspection of urea loading bucket conveyor for fatigue cracking during operation.
6. Corrosion surveying of pressure vessels during operation.
7. Interpretation of radiographic films as per ASME sec IX, Sec VIII Div I&II, B31.3, B31.1 and API 1104.
8. Inspection of over head cranes by using Tandem reel ultrasonic techniques

Aug 2004 to Sept 2004: PIH Services ME Ltd, Equatorial Guinea
Designation: QC Inspector (RT film Interpretation)
Client: Marathon Oil (UK) Ltd, Equatorial Guinea
Project: ALBA Onshore Facilities Project, Malabo

Responsibilities handled:
1. Radiographic film interpretation of RT films as per ASME B31.1 and Sec IX
2. Cross checking of Ultrasonic tested weldments for root lack of fusion.
3. Defect mapping and plotting as per client requirements.
27 Jan 2004 to 30 July 2004: Cooper Heat Middle East, Dubai, UAE
Designation: Senior NDE Inspector
Client: TOTAL FINA ELF, France
Project: DOROOD Onshore Facilities Project, Kharg Island, IRAN

Responsibilities handled:
1. Visual inspection carried out as per TOTAL FINA EIF, IRAN for water injection, chemical injection pipelines.
2. Ultrasonic testing on offshore structures and wellhead collars as per AWS D1.1.
3. Inspection on pressure vessels for exempted defects for confirmation.
4. Inspection of heavy walled piping for sea water services by ultrasonic testing.
5. Special techniques such as B-Scan imaging on the existing on shore facilities.

10 Feb 2003 to 08 Jan 2004: Larsen & Toubro Ltd, (Heavy Engineering Div) Hazira Works, Surat
Designation: NDE Engineer (E2)
Client: Various Clients
Project: Various Projects as mentioned below
Responsibilities handled:
1. Performed Time of Flight Diffraction Technique (TOFD) on PWHT treated pressure vessel after hydro static testing (Ethylene oxide reactor for BASF, Germany, & Technicas, Spain).
2. Certified radiological officer for controlling and operation of radiography for heavy walled vessel by 12MeV linear accelerator (made- Mitsubishi electric company, Japan, Output -1200R/Min).
3. Certified Site-In charge for allocation of jobs for Contractors and conducting safety surveillance audits for radiation protection.
4. Performed under clad cracking (UCC) on the steam generators used for the nuclear power plant by special technique probes.
5. Performed High temperature ultrasonic testing for the special type of material fabrication processes.
6. Eddy current testing on nuclear control rods of cadmium sandwiched with stainless steel sheet.
7. Qualified Ultrasonic operator as per ASME Sec VIII Div I for austenitic stainless steel, certified by Lloyds, United Kingdom for EU Based Pressure vessel works.
8. Co-ordinate with the NDT personnel & interpretation of radiographs as per client specification.

27 Jun 1997 to 31 Jun 2002: Super Quality Services, Trichy, India
Designation: Site-In charge
Client: Various Clients
Project: Various Projects in India
Responsibilities handled:
1. Maintaining of shooting sketch records for typical castings.
2. Radiographic interpretation of castings as per ASME B16.34 and reference with ASTM E446, E286, & E180.
3. Trouble shooting of pattern design based on the radiographic result with customer.
4. Conducting ultrasonic testing on plates, butt welded pipes, nozzles and castings.
5. Conducting Radiographic testing by IR-192 and CO-60 Sources.
6. Conducting of MPI, PT on the machined, semi finished casting with both dry and wet methods for monitoring of process related discontinuities.
7. Maintenance of records for radiation protection aspects and operation related records as per strictly BARC Requirements.
8. Maintenance of Records for ISO auditing will be regularly monitored.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 3124)

Go to Search Parameters...

Brief Description

Construction Management/Estimating/Supt/PM

Experience in pipeline, Power Plat Installation

Technical Writing with 15 Years of Experience in the UAE

Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,

instrument supervisor 5 year experiance

Chief Enineer, Limited, Oceans, Unlimited HP

Jamiu Badmos is a Registered Engineer cum HSE Professional with over 9yrs experience in QHSE & Project Management

Electrical field

Ability to perform field inspections, risk assessment, review, prepare procedure and hand.Self-development in administration and management skillsle permit to work system.Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems.

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

CSWIP 3.2,BGas Grade 2,ASNT Level 3 in RT,MT Level 2 in RT,PT,MT,UT

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

Handle preventive maintenance for the machine , servicing machine ,replace breakdown component /or equipment.

RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modicon, Quantum, M340, etc.) Setting up and commissioning of Advantys IO systems Rockwell, RSView Wonderware, Intouch

Bridge, Highways/Roads engineer: A devoted qualified Civil Engineer seeking a challenging career opportunity in Bridges/Roads construction management projects in the Middle East/Africa regions

Construction Manager for large scale projects

MSc Engineering / Business Development / Project Management /Energy fielsd

Control Systems Engineer (Programmer & Designer)

Project Manager / Finance Management

22 YEARS POWER, PETROL-CHEMICAL, AND REFINERY INDUSTRY

10 Plus years Developing and maintaining EPC Schedules Utilizing Primavera Softwares

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

Tendering & Estimation, Proposals Preparation, Contracts Engineer

Fourteen years of consistent and solid work experience in the field of Instrumentation, out of which the past ten years are in the Middle East. Certified in Instrumentation Mechanism by the Government I.T.I. from T.R. Pattinam, Karaikkal, Pondicherry, India during the year 1990-92.

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Electrical Engineer / Site Engineer / Supervisor / Draftsman

Quality Control professional

Rotating & reciprocating equipment technician

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Architectural Technologist student seeking summer employment Some construction experience good AUTOCAD skills

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

Structural Steel Detailer, Tekla v15, Pro Steel v17 Auctocad 2008

Senior Geoenvironmental Engineer (Contaminated Land, Geotechnical) with over 5 years UK experience

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Professional Land Surveyor

Electrical Engineer and Computer Sciencer

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

Electrical-Mechanical Engineer graduate from National University of Engineering with experience on electrical distribution projects and projects execution in the oil and gas industry. I have the ability to interact and communicate with all disciplines in the engineering field. I am competent in work

Multi-skilled engineer

I am a qualified Metallurgy and Materials Engineer with international research and training experience. I am a person with strong organizational skills and am very confident in analyzing and solving problems with positive outcomes. My past studies in Metallurgy and Materials Technology and the resea

Proficient in reading mechanical drawings and designing using Auto Cad, CATIA, NX-IDEAS.Strong Technical writing and presentation skills along with good hold in MS - Office.Master of Engineering (G.P.A - 10.33 out of 13)(2008- 2009)University of Windsor.

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

I am working as welding inspector in oceanreeng ois project Ras Gas. And befor date of 28 april 2007 working with EIL project Burj Dubai Development & GRAVITY BASE STRUCTER IN DUBAI DRY DOCKS.

Civil/Structural/ Architectural Designer with extensive knowledge of petrochemical and oil and gas industry. Expertise in 3d Bentley Structural and knowledgeable in Staad Pro

Develop and Execute marketing strategies/plans by analyzing current business situations in order to meet group's business objectives and also to maintain and increase sales. (Advertising/PR/Events/Promotions/Exhibitions/Market research)

Mechanical Engineer, technical support

Eco-friendly Architect, Revit, Autocad, 3D max, SketchUp, Photoshop, Flash, Coral-draw, Illustrator, Rhino3D.

E&I Construction Supt.,Inspector, Commissioning Eng. 30 years plus experience, in various industries, at various supervisory levels.

Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Sales, Engineering Project Manager

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out