Resume - Diploma in industrial automation

Misco Jobs

Resume #85526

CONTACT INFORMATION:
View contact information...

Objective:-
Looking forward for challenging work on electrical & industrial electrical automation system and opportunity for contributing exposing my talent acquired.

Work Experience:-

„« I have worked with ¡* Swarna Electrical Pvt. Ltd. Nagpur.¡¨ as Electrical Technician in which my work scope are.
„Ï Electrical HT/LT and Control side's erection.
„Ï Industrial electrical HT/LT and control cables laying.
„Ï With termination, connection & glanding and cables tray work also.
„Ï Electrical motors panels testing & maintenances.
„Ï HT/LT Panels, control circuit, motor and switch gear testing with meager.
„Ï Electrical HT/LT panels, motors control panel's & switch gears erection.
„Ï Electrical industrial lighting testing, erection & commission.
„Ï Handling Material and man power on site.
„Ï Quick response of breakdown as per time schedule.
„Ï Involved in the preventive maintenance of all system daily, monthly & weekly.
Project done:-
„Ï Maharastra Metal powder Pvt. Ltd. Bhandara M.S.
„Ï Central India Polyster Pvt. Ltd. Nagpur M.S.
„Ï Ashok Layland Pvt. Ltd. Bhandara M.S.
„Ï Government RTO Building PWD Works Gondia M.S.
Duration: 15th May 1999 to Till to 8th Sept 2004

„« I have worked with ¡* Hitek Engineering Service Mumbai.¡¨ As Site Engineer in Automation Department in which my work scope are.

„Ï Hands on fire hydrant, sprinkler and spray automation system for main power control room, sub-station, power transformer, textile, chemical lab, and chemical plants area.
„Ï Control cables laying and panels erection and commissioning.
„Ï Control wrings termination connection and testing.
„Ï PLC programming for fire hydrant motor pump system.
„Ï Panels and motors erection and commissioning.
„Ï Addressable programming for fire control panels of fire fighting.
„Ï Erection & Commissioning of fire water pump house automation of jockey pump, hydrant pump, D.G. by PLC.
„Ï Work with ABB800 PLC, Alan Bradly RX500 PLC and Scada IFIX.
„Ï Erection & Commissioning of solenoid valve, pneumatic valve.
„Ï Arrangement, erection & commissioning of smoke, heat, MCP, hooter, siren for fire system.
„Ï Drafting of schematic for pumps room layout and electrical drawing using AutoCAD.

Project done:-
„Ï ACC cement plant Tikaria U.P.
„Ï ACC cement plant Lakheri R.J
„Ï ACC cement plant Kymore M.P.
„Ï Hindustan Zink Chittorghad R.J.
„Ï Tata Power Distribution Unit Mumbai.
„Ï Tata Power Garneting Unit Trombay Mumbai.
„Ï Alok Textile Daman U.T.
„Ï Tata Battery Ranjangone MIDC Pune
Duration: 18th Jan 2007 to Till to 22nd Nov 2007

„« Now presently working with ¡* Honeywell Automation India Ltd, Pune.¡¨ Through ¡* Transtech Projects Pvt. Ltd. Pune¡¨ As Site Engineer in Projects Department in which my work scope are.
„Ï Preparation of I/O list and projects data.
„Ï Some work on HAIL C200 DCS / CS3000 DCS of Yokogawa.
„Ï DCS Panels and field instrument erection.
„Ï Control cables laying and termination connection and glanding.
„Ï Control connection of DCS panels & instrument sides.
„Ï Loop testing of field to DCS.
„Ï VFD connection and programming.
„Ï LT and Control Panels, motor testing with meager.
„Ï Handling material and documentation reporting.
„Ï Site preparation, mobilization of contractors for carrying out erection activities.
Project done:-
„Ï GMR Group Sugar Plant Haliyal Karnataka.
„Ï DSM Plastic Engineering Ranjangone MIDC Pune.
Duration: 4th Feb 2008 to till date.

Summary of qualifications:-
„Ï Ac/Dc Control System Training in A.V.T.S. Nagpur.
„Ï P.L.C. Programming Training In A.V.T.S. Pune.
„Ï Diploma in Industrial Automation I.D.E.M.I. Mumbai.
„Ï Diploma in Electrical Engineer Ghardchiroli.

Software skill:-
„Ï Operating System: - Windows XP, Windows 98, Windows 2003 Server.
„Ï Software: - Microsoft power point, Microsoft word, Microsoft excel.
„Ï Auto Cad 2005 2D.

Personal Details:-
Date of Birth: 15 Sep. 1981
Sex: Male
Marital Status: Single
Language known: Hindi, English, Marathi

Hobbies: Traveling, Net-surfing, Friend making.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 3125)

Go to Search Parameters...

Brief Description

Having six years of experience in managing various geotechnical projects with expertise in planning and execution of geotechnical investigations for mega industrial project sites incorporating all significant aspects.

Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries

14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.

Pre-casting, Installation, Cast in situ (Wing walls, sleepers, equipment & pipe support, cathodic protection foundations, sub-station & control buildings, RCC pipes for storm water culverts, Right of way, Sectionalizing valve stations

Mechanical Design Engineer with 3 years experience in sheet metal and plastic designs.

Diploma in industrial automation

As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.

Electrical Engineering Manager/ Project Manager

Civil engineer with more than five years combined experience in Civil Design, Engineering and Project Management

Seeking Project Engineer or Sr Process Engineer position worldwide based out of Houston Texas

I am a Mechanical Engg graduate, with 9 years experience in various projects, out of which 7 years at Jacobs H&G Private Ltd. (an associate of Jacobs Engineering. Inc. USA), in ISO 9001 environment.

An Engineer with business acumen, client awareness, practical skills, overseas experience and sound engineering knowledge.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

Geotechnical Engineer working in design, planning, technical follow, contract administration, reporting, financial studies and cost control of underground works such as DW, Piles, Grouting, Tunnelling, Dewatering.

Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D

Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating

Working HSE Engineer with 7 years of experience and 2 years in Oil and Gas field in UAE

EPCM Project Manager, Design Manager, Contract Administrator, Construction Manager, 10 years experinece, Bachelor of Civil Engineering

I have 21 years of professional experiences with several EPC Companies (Snamprogetti, ABB, Technip and etc.) and Clients (AGIP, CHEVRON) overseas in Civil Construction / Project Management Team.

Properly carry out construction wok including supervision of projects as directed by project or Design Engineer. College Diploma in Construction Trade, National Technical Certificate, Federal Trade Test Certificate, National Diploma in Building Technology

Worked with BOROUGE as MECHANICAL SUPERVISOR through TECNIMONT from 11th MAY 2008 to 11th JAN 2009.

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

I completed my Diploma in Electrical from MS University in year 2007 after that to at present I always working on AutoCAD for different Companies jobs as per them requirement.

1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu., 19 years thorough exposure in Mechanical System of Thermal P

Operations manager with 30 years experience in the mining industry.

Project Manager / Engineer, Private & Public Sector Experienced

Skills: Architectural/Engineering: Well trained and experienced using AutoCAD 2000LT to AutoCAD 2009, PLS-CADD, Microstation V8, Artist Rendering, Illustrations, Freehand Sketches, 2D Modeling, CAD Presentations

Mechanical Engineer with 3 years of experience in electrical instalations

B.E Civil - 2001

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Senior Electrical/Design/Project Engineer for HV and MV substations

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

About eight years of solid experience in designing and implementation(execution) of structural works

Experience in Construction of Power House, Highway Roads, Highrise Buildings, Canals, Air Ports, Aero Bridge, Delhi Metro Rail, Commercial and Residential Multi Story Buildings, Water Tank, Guest House, Domes. Familiar with ISO 9001, ISO 14001 and Safety systems.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

Iam a diploma holder in Mechanical engineering with knowledge in autocad, Pro-e. Working as supervisor , engaged in fabrication & erection of pipelines.

Training and Supervision of Technicians, Quality Control, Sudying Chemical Engineering - Dipolma level, Soil, Asphalt and Concrete Testing (Lab and Field)

Certified Project Management Professional (PMP from PMI, USA) has extensive experience in technical, commercial and quality management aspects of the construction projects.

Diploma of associate engineer

Diploma Civil Engineering

AutoCAD Operator

I was graduated in Bachelor of Science in Mechanical Engineering and my work experiences was in the field of QA/QC in construction of district cooling plant with two years in refinery construction and currently working as a Mechanical Inspector in a consulting firm.

Mr. Papanna has more than 5 years diversified engineering experience in the process, petrochemical and power industries. These duties included developing specifications and requisitioning equipment, performing technical evaluations and making recommendations for purchase, and specifying all testing

•Awarded department fellowship to pursue graduate studies. •Secured fourth place in undergraduate engineering. •Skilled in working with IMEX (CMG's reservoir simulator) and E100 (Eclipse simulator). •Received four promotions in a span of three years. •Prepared pipelay/installation reports

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out