Resume - I was graduated in Bachelor of Science in Mechanical Engineering and my work exp...

Misco Jobs

Resume #85967

CONTACT INFORMATION:
View contact information...

EDUCATIONAL BACKROUND:
College: Don Mariano Marcos Memorial State University
Course: Bachelor of Science in Mechanical Engineering
Address: San Fernando City, La Union, Philippines
School Year: 1995 to 2000

Secondary: Bethany Mission School
Address: Sta. Marcela, Apayao, Philippines
School Year: 1991 to 1995 (Graduated Valedictorian)

Elementary: Sta. Marcela Central School
Address: Sta. Marcela, Apayao, Philippines
School Year: 1985 to 1991 (Graduated Valedictorian)

WORKING EXPERIENCE:

Company: Parsons International Limited
Project: Tabreed District Cooling Scheme- Al Sowah Island Chilled Water Distribution Pipin
Address: Abu Dhabi, UAE
Position: Mechanical Inspector
Inclusive Date: June 3, 2009 to present

Job Description:
1.Inspection and verification of completed works in conformity with approved shop drawings.
2.Studying of concept lay outs and drawings and record deficiencies noted to Resident Engineer.
3.Checking that the works are being carried out according to the approved procedure laid down in method of statement and to ensure compliance with design specification.
4.Verification of materials delivered at site.
5.Witnessing of Non Destructive Testing at site.
6.Ensuring safety norms, relevant building codes etc. are being observed and report any unsafe method.
7.Understand the sequence of activities at site for executing in any given works and foresee any likely hindrances and report to Resident Engineer.
8.Monitor progress of works at site.
9.Maintain records of inspection, safety and quality notices, and works executed at site.
10.Review method statements submittal and discuss to Resident Engineer for final approval.
11.Verification of as built drawings at site.
12.Review shop drawings submitted by contractor and verify with approved construction drawings and technical specification and discuss to Resident Engineer for final approval.
13.Review contractor monthly progress reports and invoices as per site actual works, delivery of materials, and their installation and discuss to Resident Engineer for Final Approval.

Company: ETA Engineering and Contracting W.L.L.
Project: Dubai Tower, Doha
Address: Doha, Qatar
Position: QA/QC Engineer
Inclusive Date: May 28 to October 10, 2008

Job Description:
1.Attendend weekly progress meeting by the main contractor, client, and ETA management to discuss QC related issues to site.
2.Prepare Project Quality Plan for ETA incorporating as per main contractor Standard Project Quality plan.
3.Preparing of method statements, Inspection Test Plan, and Inspection Checklist for mechanical and electrical works to be submitted to main contractor and consultant for approval.
4.In process inspection of mechanical and electrical works at site and coordinates to main contractor and consultant for inspection.
5.Maintain QC related documents file as per approved Project Quality Plan.
6.Prepare of Work Inspection Request of every finished work to be inspected by the main contractor and consultant and obtain approval signature to them.
7.Conduct material Receiving inspection and coordinate to main contractor and consultant for inspection.
8.Oversee and assisting document controller for implementing proper handling of documents as per established Project Quality Plan.
9.Review approved shop drawings and verification for actual implementation at site.
10.Interact to the Project Engineers and Project Manager at site for QC related problems and discuss for possible solutions.
11.Prepare and maintain log for all QC related documents for easy retrieval and traceability of documents.

Company: SNC Lavalin Gulf Contractors
Project: Ajman-01 & Ajman-02 TABREED District Cooling Plant
Address: Ajman, UAE
Position: QA/QC Engineer
Inclusive Date: Nov. 11, 2005 to April 9, 2008

Job Description:
1.Attend weekly coordination meetings with sub contractors for the quality issue on the project.
2.Set up quality control file s as per company (SLGC) site filing procedures.
3.Prepare related Inspection Test Plans as per SLGC standards and obtain approval to SLGC Sr. QA/QC Engineer, QA Coordinator and Project Manager prior to submit to client (TABREED).
4.Validate that the work executed complies with the quality control requirements as per approved quality documents submitted and signed by Senior QC Engineer.
5.Identify, register, and report deviations, deficiencies, non conformances, and corrective action implementations.
6.Monitoring and report deviations, deficiencies, and non conformances corrective action implementation.
7.Review as built drawings submitted by sub contractors and highlight to SLGC engineering in advance for any deviation noted.
8.Review method of statement and Inspection test plans submitted by the sub contractors and submit for SLGC QA Coordinator and Project Manager for approval.
9.Conduct daily inspection and work progress at site.
10.Highlighting and discuss to site manager any corrective action implementation, which is not carried out according to the approved method of statement with in the defined closing date in a timely manner.
11.Issue notification to client representative visits for inspection and testing witnessing.
12.Conduct site inspection for Civil, mechanical and electrical works for the subcontractors.
13.Review sub contractors site QC Engineers / Inspectors works as per Project Quality Assurance Plan.
14.Lead system inspection with client representative and fill out appropriate inspection summary forms.
15.Provide needed quality control records for systems transfer to commissioning team as per construction/commissioning interface requirements.
16.Maintain quality control records. At the end of construction mandate, obtain contractor's quality control history books and quality documents.
17.Prepare and transfer all quality control related documents for SLGC archiving and to produce copy of handing –over documents for client as per document hand over procedure.
18.Perform factory inspection on local manufactured/assembled project requirements with site discipline engineers led by senior quality control engineer.
19.Assist in the resolution of any site quality related problems.

Company: EEI Corporation
Project: Fairways Tower Project
Address: Fort Bonifacio, Taguig Metro Manila, Philippines.
Position: Sr. Quality Control Engineer II (MEP Inspector)
Inclusive Date: Oct. 1, 2004 to Nov.9, 2005

Job Description:

1.Implementation of the Quality Management and Control program for the project.
2.Daily site inspection and periodical off site inspection.
3.Controlling all inspection activities on site.
4.Completion of necessary documentation to verify the worked performed.
5.Ensuring that inspection requests are implemented.
6.Ensuring that all test reports are verified to meet the contract requirements.
7.To ensure all materials delivered to site are inspected and conform to specified requirements.
8.Witnessing material testing such as; in-situ density, concrete, steel, Leak Testing for pipes such as hydro test, and gravity test, insulation and continuity test for electrical wires and cables with the client representative.
9.Reinforcement bar inspection prior for formwork closing and concreting.
10.Issue and administer Non Conformance Reports as necessary and issue an Corrective Action Report as applicable and ensure follow up
11.Report to the Project Manager any found deficiencies at site.
12.Develop and file Quality Control History of the project as per the company standards.
13.Review contractor's approved submittal and shop drawings and verify at site for actual implementation.

Company: Al Rushaid Construction Company/EEI Corporation
Project: Ethylene Plant Project (Jubail United Petroleum Company)
Address: Jubail, Kingdom of Saudi Arabia
Position: Quality Control Engineer
Inclusive date: Sept. 1, 2003 to May 24, 2004

Job description:
(Fabrication Shop Inspector – September to November)
1.Fit up inspection for fabricated pipe spools prior for welding.
2.Request testing for Non Destructive Examination of all accepted welds as per project standards and specifications.
3.Fit up, and weld inspection for the fabricated structural and piping supports.
4.Final inspection and verification of fabricated pipe spools and supports as per approved isometric and standard supports drawings prior for releasing at site.
5.Material inspections and verification for the pipe spools during fabrication process.
6.Review and checked for mill test certificates of materials used in fabrication.
7.Review and checked approved site instructions, and check for actual implementation at shop.
8.Prepare quality control inspections, non conformances and surveillance reports.
9.Conduct material receiving and daily inspection at shop.
(Test Package Reviewer – December to January)
1.Review and verify test packages required testing, prepare corresponding checklist, arrange all NDE test results including weld mapping for easy traceability on isometric drawings and coordinate to client inspector for approval before releasing to site for testing.
(Piping Inspector (Pressure Test Witnessing Inspection) – February to May
1.Conduct line checking for the pipes, verification for the completeness of the supports, valves, instrumentation tapping points, and verification of non destructive test results for the welds.
2.Verify test required on the approved test packages, check for the test limits points, calibration certificates for the gauges, and inspection for the joints for possible leaks.
3.Coordinate to client inspector for final testing and obtain approval to him after testing was accepted.

Company: Al Rushaid Construction Company/EEI Corporation
Project: Beri Ethane Recovery project
Address: Beri Gas Plant, Jubail, Kingdom of Saudi Arabia.
Position: Quality Control Engineer
Inclusive Dates: Jan.13, 2002 to July 16, 2003

Job description:
Material Receiving Inspector (January 2002 to October 2002)
1. Receiving inspection for the equipments delivered at site.
2.Review mill test certificates as per actual materials heat/cast numbers.
3.Visual inspection and verification as per packing list and approved submittals for the mechanical equipments delivered at site.
4.Prepare quality control inspection and non conformances reports related to the materials delivered at site.
5.Conduct daily inspection for correct handling and proper storage of all materials received at site.
Fabrication Shop Inspector (November 2002 to July 2003)
1.Fit up inspection for fabricated pipe spools prior for welding.
2.Request testing for Non Destructive Examination of all accepted welds as per project standards and specifications.
3.Fit up, and weld inspection for the fabricated structural and piping supports.
4.Final inspection and verification of fabricated pipe spools and supports as per approved isometric and standard supports drawings prior for releasing at site.
5.Material inspections and verification for the pipe spools during fabrication process.
6.Review and checked for mill test certificates of materials used in fabrication shop.
7.Review and checked approved site instructions, and check for actual implementation at shop
8.Prepare quality control inspections, non conformances and surveillance reports.
9.Conduct material receiving and daily inspection at shop.

TRAINING AND SEMINARS ATTENDED

On The Job Training
Company: Philippine Long Distance Telephone Company
Address: San Fernando City, La Union, Philippines
Inclusive Dates: March 22 to April 30, 199

Pipe Fitters Development Training Program
Company: EEI Corporation (Construction Division)
Inclusive dates: September 17 to Oct. 23, 2001
Address: #12 Mangahan St., Bagumbayan, Libis, Quezon City, Philippines

ISO 9001:2000 Orientation
(Quality Management System Application)
Company: EEI Corporation (Construction Division)
Date: November 12, 2004
Address: FAIRWAYS Tower, Makati Philippines

Welding Fundamentals and Inspection Basics
Company: SNC Lavalin Gulf Contractors
Date: May 2, 2007
Address: Ajman, United Arab Emirates

COMPUTER APPLICATIONS LITERACY
Microsoft office and internet applications

GOVERNMENT EXAMINATION TAKEN:
Philippine Licensure Examination for Mechanical Engineers
(Passed) Licensed Number 57894
Date Issued: Nov. 15, 2000

PROFESIONAL ASSOCIATIONS:
Member – Philippine Society of Mechanical Engineers

LANGUAGES SPOKEN:
English, & Tagalog

INTERNATIONAL EXPEREINCE:
Kingdom of Saudi Arabia, United Arab Emirates, Qatar and Philippines

PERSONAL DATA:
Date of Birth: February 23, 1979
Age: 30
Civil Status: Married

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 3087)

Go to Search Parameters...

Brief Description

An Engineer with business acumen, client awareness, practical skills, overseas experience and sound engineering knowledge.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

Geotechnical Engineer working in design, planning, technical follow, contract administration, reporting, financial studies and cost control of underground works such as DW, Piles, Grouting, Tunnelling, Dewatering.

Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D

Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating

Working HSE Engineer with 7 years of experience and 2 years in Oil and Gas field in UAE

EPCM Project Manager, Design Manager, Contract Administrator, Construction Manager, 10 years experinece, Bachelor of Civil Engineering

I have 21 years of professional experiences with several EPC Companies (Snamprogetti, ABB, Technip and etc.) and Clients (AGIP, CHEVRON) overseas in Civil Construction / Project Management Team.

Properly carry out construction wok including supervision of projects as directed by project or Design Engineer. College Diploma in Construction Trade, National Technical Certificate, Federal Trade Test Certificate, National Diploma in Building Technology

Worked with BOROUGE as MECHANICAL SUPERVISOR through TECNIMONT from 11th MAY 2008 to 11th JAN 2009.

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

I completed my Diploma in Electrical from MS University in year 2007 after that to at present I always working on AutoCAD for different Companies jobs as per them requirement.

1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu., 19 years thorough exposure in Mechanical System of Thermal P

Operations manager with 30 years experience in the mining industry.

Project Manager / Engineer, Private & Public Sector Experienced

Skills: Architectural/Engineering: Well trained and experienced using AutoCAD 2000LT to AutoCAD 2009, PLS-CADD, Microstation V8, Artist Rendering, Illustrations, Freehand Sketches, 2D Modeling, CAD Presentations

Mechanical Engineer with 3 years of experience in electrical instalations

B.E Civil - 2001

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Senior Electrical/Design/Project Engineer for HV and MV substations

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

About eight years of solid experience in designing and implementation(execution) of structural works

Experience in Construction of Power House, Highway Roads, Highrise Buildings, Canals, Air Ports, Aero Bridge, Delhi Metro Rail, Commercial and Residential Multi Story Buildings, Water Tank, Guest House, Domes. Familiar with ISO 9001, ISO 14001 and Safety systems.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

Iam a diploma holder in Mechanical engineering with knowledge in autocad, Pro-e. Working as supervisor , engaged in fabrication & erection of pipelines.

Training and Supervision of Technicians, Quality Control, Sudying Chemical Engineering - Dipolma level, Soil, Asphalt and Concrete Testing (Lab and Field)

Certified Project Management Professional (PMP from PMI, USA) has extensive experience in technical, commercial and quality management aspects of the construction projects.

Diploma of associate engineer

Diploma Civil Engineering

AutoCAD Operator

I was graduated in Bachelor of Science in Mechanical Engineering and my work experiences was in the field of QA/QC in construction of district cooling plant with two years in refinery construction and currently working as a Mechanical Inspector in a consulting firm.

Mr. Papanna has more than 5 years diversified engineering experience in the process, petrochemical and power industries. These duties included developing specifications and requisitioning equipment, performing technical evaluations and making recommendations for purchase, and specifying all testing

•Awarded department fellowship to pursue graduate studies. •Secured fourth place in undergraduate engineering. •Skilled in working with IMEX (CMG's reservoir simulator) and E100 (Eclipse simulator). •Received four promotions in a span of three years. •Prepared pipelay/installation reports

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

Mechanical Subjects Lecturer & Senior Engineer in an Industrial & Commertial Projects

Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

Manufacturing Engineering Expert with 8 years of Experience in Tooling / Manufacturing Arena, Post Graduate in Mechanical Engineering & Management

Maintenance, Computer Hardware, Calibration,

Knowledge of design and analysis of steel and concrete structures. Special knowledge of finite element analysis(GTSTRUDL/SAP2000). Experience with all phases of building projects from drafting and design to execution and inspection.

PLANNING , MOETHODS MAINTENANCE ENGINEER

Qualification : Diploma in Civil Engineering, Professional Skills : Planning & execution of works as per the drawings & client/company’s requirement. Quantity Surveying, Billing, Man Management, Material Procurement, Labour control & over all Supervision of work.

Health & Safety Inspections (OSHA, MSDS)

Having more than 8 years of extensive professional experience in project management, construction supervision of internationally aided highway projects including major and minor bridges, cross drainage structural works, assuring the quality of construction as per the approved drawing etc

Pipe design, P&IDs and autocad

I am a licensed land surveyor in the Philippines. I was able to practise my profession for 2 years and 11 months. My experience enhanced the knowledge and skills i learned from my university. I worked well with people and enjoyed getting the work at hand completed.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out