Resume - WELDING ENGINEERING, WELDING INSPECTIONS, MANAGEMENT, QA/QC, NDT INSPECTION

Misco Jobs

Resume #86419

CONTACT INFORMATION:
View contact information...

Nationality: Filipino
Birth Date: August 03,1977
____________________________________________________________________________________________________________________________________________________________________________

PROFESSIONAL SUMMARY:

Over eight years of extensive Equipment Inspection and Welding Engineering Experience in oil and gas industry, oil refinery, petro-chemical, power plant, manufacturing, construction, fabrication shop, onshore pipeline, underground oil storage, storage tanks, offshore pipe laying, oil field equipment, surface and subsea wellhead Christmas trees, Well verse in the construction of Pressure Vessels, Quality Control/Quality Assurance, Quality Management Systems, Auditing such as supplier/client internal/external audits, piping inspections, welding inspections, NDE inspections, interpretation of radiographs, Technically competent in welding technology.

PROFESSIONAL QUALIFICATION:

CSWIP 3.2.2 – Senior Welding Inspector with RTFI Level 3 – Course Attended
CSWIP 3.1 – Welding Inspector Level 2 – Cert. No. 33534
ASNT NDT – Level 2 in RT,PT,MT

EDUCATIONAL ATTAINMENT: Bachelor of Science In Civil Engineering
University of Batangas Philippines –2001 (5 Years degree)

FORMAL COURSES/TRAINING/SEMINARS ATTENDED:

CSWIP 3.2 Senior Welding Inspector - by T.W.I. U.K.
February 16,2009 – February 20,2009—TWI Training and Certification (S.E. Asia) Sdn.Bhd. No.8 Jalan TSB 10, Sg.Buloh Industrial Park, 47000 Sungai Buloh, Selangor Darul Ehsan, Malaysia.
Risk Management Course
25-26 September 2008 by Singapore Institution Of Safety Officers --Singapore Polytechnic Graduates Guild
Structural Welding Design
August 04, 2008 – August 20, 2008 -- Informatics Campus Block A 12 Science Centre Road Singapore 609079
Advances In Welding Technology and Its Application
March 18, 2008 – April 03, 2008 --Singapore Institute of Manufacturing Technology (SIMTECH) 71 Nanyang Drive Singapore 638075
Welding Inspector - Steel by T.W.I. U.K.
October 8,2007 – October 12,2007 --PSB CORP. No.1 Science Park Drive SINGAPORE 118221
ON THE JOB TRAINING
April – May 2000– Ruperto P. Dinglasan Contruction Inc. Tabangao, Batangas City Philippines
A New Frontier on Information Technology
Organized by AREN Computer Services
Industrial Instrumentation Course
Aug. 05 – Sep. 23, 2000 (Module I – Module III) Technical Education and Skills Development Authority (TESDA)

EMPLOYMENT HISTORY:

Company: FMC Technologies Singapore Pte Ltd. 149 Gul Circle Singapore 629605
Designation: Welding Engineer
November 05, 2007 – Present
Projects Involvement:
1.Total Pazflor
2.ENI Kitan
3.All Wood Side Energy Limited Projects (e.g. Pluto, Enfield, Infill, Vincent, Chinguette)
4.Shell Gumusut Project

Company: KNM Process Systems Sdn.Bhd. #15 Jalan Dagang SB 4/1 Taman SG Besi Indah, Seri kembangan, 43300 Selangor Malaysia
Designation: QC Welding Engineer
August 28, 2006 – September 25,2007
Project Involvement:
1.Vacuum Pipestill Replacement Project (Exxon Mobil For Sur Mer Refinery France)
2. 8 Major Columns For Shell ECC Project Singapore

Company: Fugro Suhaimi Limited,P.O.Box 2165 Dammam 31451 Kingdom Of Saudi Arabia
Designation: QC/NDT Welding Inspector
July 25, 2003 – June 2006
Project Involvement:
Rabigh Power Plant, Yanbu Refinery/MMG/Metals Services Co./APCO/Al-Sadiq/Yanbu Steel Company/Zamil Steel/Aziz Pipe/Group Five

Company: A.I.B. Vincotte International S.A P.O. Box 9688 Doha Qatar
Designation: NDT Technician
August – October 2002

Company: Filconfab Incorporated - Bolbok Batangas City, Philippines
Designation: NDT Technician
Aug. 05, 2001 – Aug. 09, 2002
Project Involvement:
1.Pilipinas Shell Petroleum Corporation
Tabangao Refinery, Batangas Philippines-- General Maintenance Partnership Agreement
2.Caltex Philippines
San Pascual Refinery, Batangas Philippines-- Expansion of Refinery Plant/Shutdown

Company: Ruperto P. Dinglasan Construction Inc. – Tabangao Batangas City, Philippines
Designation: Cadet Engineer / Estimator
April 10 – Sept. 30, 2000

Company: Atlantic Gulf and Pacific Company of Manila - San Roque Bauan Batangas Philippines
Designation: QC Piping and Welding
April 1999 to November 1999
Project Involvement: Kellogg Overseas Chiyoda Joint Venture Singapore Olefin Project

Company: Atlantic Gulf and Pacific Company of Manila - San Roque Bauan Batangas Philippines
Designation: Documentation Engineer
February 1999 to April 1999
Project Involvement: Singapore Gasification Hub Project

DUTIES AND RESPONSIBILITIES:

As Welding Engineer

Familiarize and fully understand technical specifications and relevant standards. Clarify and/or resolve any discrepancies with relevant parties. Liaise with 3rd-party representatives in all aspects pertinent to welding so as to meet customers requirements. Provide technical advise or consultation with respect to the latest welding technique, consumables, combination of welding parameters, preheating/PWHT requirements. Prepare/develop and qualify new Welding Procedures, Hands on knowledge of NDT results interpretations, welding processes and WPS/PQR/WQT. Checks weld joint preparation. Verify the application of the approved WPS. Check the qualification of welders and welding operators. Ensure that inspection procedures are in accordance with specified codes and standard. Conduct inspection of weld quality before, during and after welding. Review all inspection Non-Conformance Reports and seeks resolution. Review and approve suppliers WPS's and associated welding documentation, Attend daily meeting and act as a consultant for the resolution of all surface and subsea NCR, attend kick-off meeting with the customers and clarifies relevant requirements, Conduct qualification test for welders. Familiar with both American and European codes and standards such as ASTM, ASME VIII, ASME II, ASME IX,NORSOK M-101,M601,NACE MR-0175, ISO-15614-1, PD 5500, BS & BSEN Code and STANDARDS, API 1104,API 6A,API 16A.ANSI, and applicable industry codes and standards. Strong knowledge of different weld process such as fully automatic FPA 9000-ETR-S TIG-Hot Wire Cladding Equipment(Automatic single wire & twin wire),SAW,SMAW,TIG-Manual, GMAW, FCAW, GTAW Orbital welding. Sound knowledge in manufacture, welding & constructions practices related to corrosion resistant alloys like Inconel 625, Low alloy steel AISI 4130,8630, A182 F22, A182 F6NM, AISI 410,carbon steels, stainless steels, Duplex and Super duplex Stainless steels and non-ferous materials, Ensuring that respective sections follow project quality plan. Strong interpersonal and communication skills. Train newly hired engineers for them to be aware of the importance of welding. Ability to work with a team made up of different nationalities. Familiar with QMS. Travel overseas(some asian and European countries) as one of the active company auditor(supplier quality auditor) implementing ISO-9001:2000.

As QC Welding Egineer

Evaluate all drawings, WPS's, work instructions, Inspection Test Plan, check and identify all materials to be used as they received against the purchase specification (mill certificate). Investigate base metal imperfection and deviation visually. Check equipment to be used. Checks weld joint preparation. Verify the application of the approved WPS. Check the qualification of welders and welding operators. Hands-on knowledge of NDT results interpretation Welding processes and WPS/PQR/WQT. Ensure that inspection procedures are in accordance with specified codes and standard. Conduct inspection of weld quality before, during and after welding. Review all inspection Non-Conformance Reports and seeks resolution. Conduct qualification test for welders. Witness and monitor PWHT, hydrostatic and leak test. Familiar with codes such as ASME VIII, ASME II, ASME IX, PD 5500, BS & BSEN CODE and STANDARDS, API 1104.Well verse in the construction of PRESSURE VESSELS.

As QC Welding Inspector

Ensure that all the welding and associated actions are carried out in accordance with the welding specifications relevant to the contract or work being carried out. Prepare Welding Procedure Specification, approve Welding Procedure Test & Welder approval Procedure Test as per BS & BSEN standard and AWS structural Welding Code. Certify welders as per client specification & project requirements

As NDT Inspector
Organize and implement complex inspection programs. Perform periodical NDT results and define the necessary preventive actions for repair or replacement works. Proficient in interpreting radiographic film results and analyze ultrasonic Testing result. Organize and maintain files for performed activities. Select specialist services for the system and suitable materials to be adopted. Perform NDT activities (e.g. P.T., M.T. and R.T.U.T.) Under the Supervision of ABV ROCK GROUP SITE 7 MADINAH K.S.A. Experienced working in vessels, plants, refineries, fabrication shops, storage tanks such as caverns located under the ground. Experienced working at offshore pipe laying (Lay down and jack-up barge) under the supervision of International Marine Construction Company (I.M.C.C.) and Mohammad Almojil Group (MMG) Khafji and Tanajib kingdom of Saudi Arabia. Perform Positive Material Identification (P.M.I.) SPECTRO TEST MACHINE.

As NDT Technician

Organize and implement complex inspection programs. Perform periodical NDT survey on piping and vessel using penetrating Liquids, magnetic particles. Interpret corrosion data from NDT results and define the necessary preventive Actions for repair or replacement works. Interpret radiographic film result and analyze ultrasonic testing result. Organize and maintain files for performed activities. Select specialist services for the system and suitable materials to be adopted.

As NDT Technician

Organize and implement complex inspection programs. Perform periodical NDT survey on piping and vessel using penetrating Liquids, magnetic particles. Interpret corrosion data from NDT results and define the necessary preventive Actions for repair or replacement works. Interpret radiographic film result and analyze ultrasonic testing result. Organize and maintain files for performed activities. Select specialist services for the system and suitable materials to be adopted.

As Cadet Engineer / Estimator

Estimate the total project cost. Prepare in detail the list and cost estimate of the construction materials Supervise the construction of the project Coordinate with the foreman whenever there are matters to be clarified. Monitor the progress of the project.

As QC Piping and Welding

Conduct material inspection in accordance with the specification. Conduct supervision on the actual fabrication, erection installation of fabricated spools, pipe supports, valves and other related materials as per P & I D and Piping plan. Review and check the complete plan of piping to be installed to perform the easiest way of inspection. Specify "Hold Points" and coordinate with the client representative for approval Check qualified welders, type, size and condition of electrodes and process used for as per approved WPS Conduct visual inspection on on-going production welding to detect any erroneous procedure in order to minimize inspection during final inspection and NDE. Conduct visual inspection on welded joints of the whole spool prior to NDE. Check the over-all completeness of the pipeline system to be referred to the approved drawings and verify correctness of materials used. Conduct hardness test on pipe welded joints. Conduct inspection and witness hydrostatic test of spools. Conduct line checking on erection and prepare punch list

As Documentation Engineer

Implement relevant procedures in the preparation, collection and compilation of project's quality records. Assist QC Inspector in the preparation of as-built drawings. Check for legibility, accuracy and completeness of documents that will be compiled into the quality records. Consolidate all project records that will be submitted to the client on conformance to the project contract / specifications
SPECIAL SKILLS:

Computer Literate in MS Office 2003/2007 Word, Excel, Power Point, outlook e-mail system

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 3093)

Go to Search Parameters...

Brief Description

As an Electrical Engineer with some Experiences and Qualifications, include Instrumentation, PLCs, Control and Automation, High Technology Machineries and Equipmens Applications Skill, Engineering & Project Management, Computer Applications, Communications, and Leadership Skill.

Pressure Vessels; Package Equipment; Static Equipment; Compress, PV Elite, Auto cad Software

Solid Waste Management, Health, Safety and Environmental Management, Fumigation, Site Inspection, First Aid Service etc.

SALES , MARKETING AND PROPOSALS ENGINEER.

Project & Contract Management, Project Control, Planning, Estimation & Proposals

IT Project Management, IT Infrastructure/Network Specialist, DRP & DRS Projects, ERP Implementations, Systems Administration & Support, etc. / Bachelor of Science in Computer Science (BCS).

African experienced exploration hydrogeo / geologist Liberia Ethiopia Sudan

A highly motivated intelligent manager, who is very hard worker both individually and in a team, copes well under pressure, well presented, enthusiastic. Excellent communications skills, creative, and problem solving skills, and an effective organizer. Adaptable to new situation, determined

Over 25 years of design and engineering experience; providing design, engineering and management services for a variety of projects and fields. Expertise includes estimating, conceptual and finalized layouts, piping design, instrumentation, process, P&ID development, sizing/specifying/requisitioning

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

Qualifications: S.S.C., Intermediate, NCTVT - Vocational Diploma In Motor Mech, A.M.I.A.E. (India, Auto Engg).

Inspeection and repairs Daf Trucks, Matlab, Simulink, Excel, MS Word

Operation Manager, Project Manager, Senior Engineer, Offshore / Marine / Subsea, Geotechnical , Civil, & Geological, Client Rep, Oil & Gas, Construction

Skilful and dedicated Project Engineering, Management & Construction Specialist with extensive experience in the planning, organizing, leading, and controlling all Project requirements

Materials Control, Purchasing, Buyer, Expediting, Logistics and Warehousing. Computer tracking systems, Word, Excel, B2B, SAP and Documentum experience.

Cad design, cnc machine operation, electrician residential, commercial and power company

B.Sc. Mechanical Engineer, having Fifteen years of technical and HSE experience including three years in UAE as HSE Manager. Presently working with Eni Pakistan Oil and Gas E & P Company as HSE Advisor (Projects).

A Chemical Engineer with fifteen years of experience in design, construction and management of capital projects related to the Oil and Gas industries. Offering skill in all phases of capital project management, to include planning, design, budgeting, scheduling, safety/HAZOP, team leadership

I have been working extensively with M/s. Saudi Wiemer & Trachte Ltd., Riyadh for ten (10) years in their Tendering & Procurement Dept. The company has given me an experience and a clear edge over my professional peers.

Mechanical Engieer

Electrical Eng./Supervisor - Power Plant

M.Sc, B.Sc with 2+ years of experience

Software Skills o AutoCAD 2008 o Autodesk Inventor 2008 o Tribon M3- Pipe modelling, Structure modelling, Design Manager o Rhinoceros 4.0 Nurbs modeling o Solidworks o Primavera Project Management P3 o MS Office Suite - Word, Excel, Power Point, Outlook, Project

MAINTENANCE ENGINEER, GAS TURBINE, FITTER

A Procurement and Logistics professional with comprehensive experience of administration, procurement, contracts, logistics and management

I’m a mechanical engineer with more than fifteen years of experience in project engineering, project management, procurement and maintenance management. I’m a team oriented person with excellent communication skills and strong leadership.

Oil & Gas International Sales and Business Development Manager

Looking for a Job as Project Manager or Proposals Manager in a reputed company

Hard Worker, Honest, Trust, Finish objectives in time and in proper way

I'm a 23 years old guy done with his Electronics BS degree with minor study of Biomedical engineering and a 3years experience in this field and I'm going to graduate with my second BS degree in Electrical engineering in February 2008.. I'm looking to be a part of a team in good company..

Extensive experience & strong, decisive, and profitable leadership in utility & pipeline design,construction & maintenance management. Keen financial, negotiating, and strategic planning performance. Consistent and measurable gains in operations, safety, quality, efficiency and productivity.

I'm mechanical engineer specialized in hydraulic and pneumatic installations, with a large experience in design, maintenance, reparation for this equipments in various industry(civil, constructions, marine, production)

Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC academic, and GNVQ 3 Trade Certs. I have installation & Commissioning of both LM2500 LM6000 packages and Operations & Maintenance of GE's trailer mounted LM2500 Gas Turbine.

I will be completeing my degree in June 2005. Geoscience skills include slope stability assessment, geological and geomorphological mapping, risk, hazard and vulnerability assessment, geotechnics, seismology, rock engineering.

Fresher with diploma&engineering and with good knowledge in design and design softwares like CATIA,UG,PRO-E

I have done a 4year degree course (B.Tech) in Mechanical Engineering from an autonomous institute. My software knowledge is eqipped with Auto Cad and Pro-E Softwares.My communication skills are excellent.

Autocad,Primavera

Mechanical Engineer hands-on

A Certified PMP and a Civil Engineer with Experience as a Project Controls Engineer in International Projects in the Middle East with experience in Primavera Project Planner 3.1, Expedition, P3e 4.1 as well as using Database Mgmt Software such as Access. In addition to my site experience

over 14 years of Quality Control and Assurance within the Construction and Facilities Maintenance field. Providing leadership and Quality Control in a variety of New and or expanding projects ranging from military and civilian aircraft runways, slip form, facilities maintenance, and industrial plant

diesel engine mechanic, rig mechanic , generator mechanic

Engineering Management/Research Consulting Position—where my environmental, health and safety engineering research expertise, industrial engineering competencies, effective communication skills, strong leadership qualities, and potential to conceptualize and implement improvement initiatives

Project Manager / Product Manager with excellent people skills

WELDING ENGINEERING, WELDING INSPECTIONS, MANAGEMENT, QA/QC, NDT INSPECTION

B.Tech,Instrumentation ,Design Engineering, Erection and Commissioning in the Oil & Gas field for Onshore and Offshore Process complex /Platform and Drilling rigs And FPSO

Experienced financial analyst with over 15 years of domestic and international integrated oil and gas company experience covering a broad spectrum of activity. Proven expertise in the areas of Finance, Accounting, Project Management, Materials Management, Systems implementations (SAP/R3).

Proactive management professional with solid business/technical leadership in the oil and gas area. Team builder and problem solver with proven track record of invigorating organizations. Has international contacts, exper. in complex contract negotiations, project planing-design-financing.management

25 years mining and heavy industrial , power generation,technical trainer,maintenaince supervision superintendent roles, 6 years expat work in 4 countrys ,extensive exposure to MARC's and dealer systems,all mining equipment covered diesel and electric

Strong Experience in the area of Safety (Health, Safety & Environment). Coordinating with other construction departments on HSE related issues. Consistent performance with ability to take up responsibility and deliver results.

Junior Engineering Design and Drafting Technologist

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out