Resume - Electrical-Mechanical Engineer graduate from National University of Engineering ...

Misco Jobs

Resume #87051

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Electrical-Mechanical Engineer graduate from National University of Engineering with experience on electrical distribution projects and projects execution in the oil and gas industry. I have the ability to interact and communicate with all disciplines in the engineering field. I am competent in working as a team member and decision making, strong character and disposition to face challenges and proactive in fulfilling project objectives under pressure.
------------

OBJECTIVE:
------------
Being involved in Projects Construction's Contracts Administration, Engineering on site, precommissioning and commissioning in the electrical area, using the best engineering practices, complying the regarding international standars and being updated in new technologies

WORK EXPERIENCE:
------------
PLUSPETROL PERU CORPORATION S.A. Mar. 2004 – Feb 2005
Jun.2005 – Present
Improvement and Modifications Projects Area, Lima
Projects Engineer, Junio. 2005 - Present
I provided engineering support in the Pluspetrol Main Office in project execution and control in the areas of piping, electricity, facilities, instrumentation, etc corresponding to plant improvements at the Malvinas Gas Plant and Fractionation Pisco Plant.

My duties include coordinating with engineering companies and revision of deliverable documents. I belong to the Project Proposal Team, reviewing project proposals from the Plants, elaborating and reviewing bid packages and evaluating project scope of works with competing construction companies.

Nowadays, I`m the Contract Administrator of the EPC project: Installation of Condensate Dehydration Unit at Malvinas Gas Plant. By the end of the project`s execution, it will have cost approximately $ US 15'000,000.

Maintenance Area, Malvinas Gas Plant – Cuzco and Pisco Fractionation Plant – Ica, March 2004 – Feb 2005
I was responsible for the organization and implementation of the Project Master File (Technical Information File) at both site locations of the Upstream Camisea Project and Pisco Facility. I also provided support in materials selection, generation of service orders by means of the JD Edwards and Maximo V. 5.2 software.
The "Master File", consists of printed and digital versions of Operation and Maintenance Manuals, Manufacturers Data Books, Commissioning and Pre-Commissioning Files, Procedures, Data Sheets, As-Built Engineering Drawings, Catalogues, Pipeline Drawings, etc.

MINISTRY OF AGRICULTURE Nov. 2002-Jan. 2003
July 2003- Mar. 2004
Regional Directorate of Piura, Department of Piura
Heavy Machinery Field Supervisor
Heavy Machinery Field Supervisor responsible for field corrective and periodical maintenance checks and overhauling of machinery.

Agricultural and Heavy Machinery Program - PMAAP, Lima
Production and Maintenance Engineer
I supported Maintenance Management in agricultural and heavy machinery using the Equipment Maintenance System, SPRING.

URSUS TRANSPORTES S.A. Jan. 2003 –Apr. 2003
Maintenance Area, Callao.
I worked in Maintenance Management of Enterprise Equipment: trucks, vans and other vehicles. Programming work orders, support in material's selection and pre-requisites for purchasing, utilizing MP2 software.

CONSTRUCCIONES CIVILES Y ELECTROMECÁNICAS S.A. Aug. 2001- Oct.2002
(CONCELSA)

Projects and Works Area, Lima
As Field Engineer on site; I was responsible for project execution of and follow-through of project completion. I developed electrical design drawings of electrical distribution for the facilities (i.e. low and medium voltage networks, public lighting facilities, utility systems, etc.)

LUZ DEL SUR S.A.A. Aug. 1998 –Apr.2001
Project Engineer, Quality Project Area, Distribution Department, Service Center Vitarte.
I was assigned to a number of projects related to the improvement of quality in public lighting facilities and low voltage electrical networks. I participated in electrical fault analysis of substations and circuits of medium voltage electrical networks.
Responsible of the Program: Public Lighting Quality Projects, Service Center Vitarte - 1999.

Project Engineer, Projects and Works Department, Service Center Vitarte.
As Project Engineer of the electrical distribution projects and on site supervisor I was responsible for building contractor personnel and follow-through of work completion.
I was responsible for the Massive Electrification Program - 2002, Service Center Vitarte.

OCCIDENTAL PERUANA INC. Jul. 1997 Jul. 1998
Pre-professional practices in the Planning Section, Maintenance Area, Andoas - Perú.
I worked with the Maintenance Management Team using TMS software, of Enterprise Equipment: Diesel engines, generators, heavy machinery, Nissan vans, oil and gas compressors, pumps, plant equipments for crude oil processing, power transformers, transmission power lines and others.
I assisted in the implementation of the Predictive Maintenance, material selection and procurement using logistics software OPICS.

HUARON S.A. MINING COMPANY Jan. 1997 - Apr. 1997
Pre-professional practices in the Maintenance Area, Francois - Pasco, Perú.

I worked with maintenance and installation of electrical outdoor and indoor facilities, evaluation of substations, start-up of panel board ventilation systems, etc.

EDUCATION & CERTIFICATION:
------------
Universidad Nacional de Ingeniería 1993-1997
Graduated as Mechanical-Electrical Engineer. Upper Fifth

Universidad Nacional de Ingeniería 1990-1993
Studies at Mathematics School, Sciences Faculty. Upper Fifth

Instituto Cultural Peruano Norteamericano ( ICPNA ) 2000-2003
Advanced Studies in English.

Instituto Cultural Peruano Norteamericano ( ICPNA ) Oct 2003 – Mar 2004
Advanced Course in English Speech

Centro de Idiomas de la Universidad del Pacífico ( CIDUP ) Ene 2008 – Mar 2008
TOEFL IBT Course

Centro de Idiomas de la Universidad del Pacífico ( CIDUP ) April 2008 – June 2008
IELTS I Course

Centro de Idiomas de la Universidad del Pacífico ( CIDUP ) April 2008 – June 2008
Grammar I Course

ADDITIONAL INFORMATION:
------------
AREAS OF INTEREST
Projects Construction's Contracts Administration, Engineering on site, precommissioning and commissioning in the electrical area, using the best engineering practices, complying the regarding international standars and being updated in new technologies

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 3092)

Go to Search Parameters...

Brief Description

Project Manager / Finance Management

22 YEARS POWER, PETROL-CHEMICAL, AND REFINERY INDUSTRY

10 Plus years Developing and maintaining EPC Schedules Utilizing Primavera Softwares

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

Tendering & Estimation, Proposals Preparation, Contracts Engineer

Fourteen years of consistent and solid work experience in the field of Instrumentation, out of which the past ten years are in the Middle East. Certified in Instrumentation Mechanism by the Government I.T.I. from T.R. Pattinam, Karaikkal, Pondicherry, India during the year 1990-92.

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Electrical Engineer / Site Engineer / Supervisor / Draftsman

Quality Control professional

Rotating & reciprocating equipment technician

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Architectural Technologist student seeking summer employment Some construction experience good AUTOCAD skills

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

Structural Steel Detailer, Tekla v15, Pro Steel v17 Auctocad 2008

Senior Geoenvironmental Engineer (Contaminated Land, Geotechnical) with over 5 years UK experience

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Professional Land Surveyor

Electrical Engineer and Computer Sciencer

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

Electrical-Mechanical Engineer graduate from National University of Engineering with experience on electrical distribution projects and projects execution in the oil and gas industry. I have the ability to interact and communicate with all disciplines in the engineering field. I am competent in work

Multi-skilled engineer

I am a qualified Metallurgy and Materials Engineer with international research and training experience. I am a person with strong organizational skills and am very confident in analyzing and solving problems with positive outcomes. My past studies in Metallurgy and Materials Technology and the resea

Proficient in reading mechanical drawings and designing using Auto Cad, CATIA, NX-IDEAS.Strong Technical writing and presentation skills along with good hold in MS - Office.Master of Engineering (G.P.A - 10.33 out of 13)(2008- 2009)University of Windsor.

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

I am working as welding inspector in oceanreeng ois project Ras Gas. And befor date of 28 april 2007 working with EIL project Burj Dubai Development & GRAVITY BASE STRUCTER IN DUBAI DRY DOCKS.

Civil/Structural/ Architectural Designer with extensive knowledge of petrochemical and oil and gas industry. Expertise in 3d Bentley Structural and knowledgeable in Staad Pro

Develop and Execute marketing strategies/plans by analyzing current business situations in order to meet group's business objectives and also to maintain and increase sales. (Advertising/PR/Events/Promotions/Exhibitions/Market research)

Mechanical Engineer, technical support

Eco-friendly Architect, Revit, Autocad, 3D max, SketchUp, Photoshop, Flash, Coral-draw, Illustrator, Rhino3D.

E&I Construction Supt.,Inspector, Commissioning Eng. 30 years plus experience, in various industries, at various supervisory levels.

Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Sales, Engineering Project Manager

12 Years of experience in the Project Management, Planning, Controlling, Production and Material Management

15 years experience in erection commissioning and maintenace of field instrumentation , DCS, PLC, SCADA ,VFD, LT PANELS , in petrochemical, steel, pharma,copper plants

I am Mechanical engineering graduate with 18 years of experience with the Project Management & execution, Procurement & Contract Management. Executed Tendering, Commercial Evaluation, Negotiation, and Contract Administration for mega projects in Hydrocarbon and Oil & Gas sector. Involved in Concept

Mining and geological engineer from the university of Liege with a specialization in geophysical methods and geotechnics.

Project Manager, Field Engineer, Commissioning Electrical Switchgear

ISO/ASNT certified Vibration analyst ,More than three years of engineering experience ,Analytical skills and self learning ability,committed to any work unconditionally,Able to work under pressure,Able to liaison between technical groups ,Proven ability to improve efficiency

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Total eleven years of experience in Refineries/Petrochemicals, Chemical & Oil Port Terminal, Offshore Platform projects etc. Presently working with Foster Wheeler, Singapore and Previously worked for prestigious organizations like, Technip-France, Snamprogetti SpA-Italy, Indian Oiltanking, Indo Gulf

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Applying for the post of safety officer in your esteemed concern

Academic Background:M.Sc.Tech. (1987), Applied Geology, Indian School of Mines, Dhanbad, India. Expertise: Engineering Geology and Rock Mechanics in the field of rock engineering

Over 20 Years Industrial, I&E Commissioning Field Service Engineer /Electrical Start-up Engineer

I am Tank and piping/pipeline / structure Superintendant

Environment, safety, health, quality, security, international, lean manfuracturing, construction, operation, management

A Buyer /Expeditor with 18 years Gulf experience

Welding Engineer, ASME,AWS D1.1, Welding Inspection, Welding supervision

Familiar with all steps of equipment, structure fabrication and piping installation as pertinent specification, document control, subcontractor management knowledge, claim representation and site safety conception.

I'm the Safety Manager for the company I'm with now...

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out