Resume - ISO/ASNT certified Vibration analyst ,More than three years of engineering exper...

Misco Jobs

Resume #87105

CONTACT INFORMATION:
View contact information...

A talented Mechanical Engineer with experience in Condition based maintenance and Vibration analysis. looking to improve my skills and my experience in an international organization

Summary
******
-ISO/ASNT certified Vibration analyst
-More than three years of engineering experience.
-Analytical skills and self learning ability.
-committed to any work unconditionally.
-Able to work under pressure.
-Able to liaison between technical groups.
-Proven ability to improve efficiency.
-Hard working and detail oriented.

PROFESSIONAL EXPERIENCE
***********************

Arab Swiss Engineering Co. ASEC, Cairo, Egypt June 2007 – Present
Condition Based Maintenance (CBM) Engineer.
"Vibration Analyst" ISO/ASNT Certified

-Collect data and analyze vibration signature using all analysis techniques such as Cross Phase analysis, ODS, Run up and Cost down tests, Bump test, Peakvue …etc. to detect and diagnose any problem before it leads to failure in several cement manufacturing plant such Helwan, NCC, Sinai and Masr Bani Swif plants.
-Using CSI analyzers 2120 and 2130 Pro Consultant and its software "AMS".
-Correct mechanical unbalance problem by applying in-filed balance jobs "multi plan and multi speed" using different balance techniques such as "static-couple balance" and flash angle "one shot balancing".
-Writing monthly technical reports about the machinery health with clear explanations and professional recommendations and supervise applying these recommendations.
-Built up a data base for the equipments and select the equipments which go into the route.
-Built up proper case studies.
-Measuring and diagnosing faults of Bearings, Gearboxes, Electric Motors, Air Blowers, Fans, Air Compressors, centrifugal pumps, piston pumps.

Egyptian Engineering Co., EEC, Cairo, Egypt November 2006 – May 2007
Site/Office Mechanical Engineer

-Mange the operation of building water treatment stations, job involved designing and mechanical drawing skills.
-Designed water treatment units and stations and select the layout of these stations

--------------------------Total years of Experience: 3 years-----------------------------

EDUCATION
*********

Helwan University, Cairo, Egypt
B.S.C in power Mechanical Engineering, 2001- 2006 Grade Good
Graduation project Studying the performance of centrifugal compressor at variable speed.
Grade Excellent

Mobius Institute, Victoria, Australia
Vibration Analyst ISO/ASNT certificate Category II May 2009
Certificate Number 080704

TECHNICAL SKILLS
****************

MS Windows (98, 2000, xp and vista), AutoCAD, Swish, MS Office, Machinery Health Manger "AMS"

LANGUAGES
*********

Arabic Mother tongue
English Very Good "writing, speaking and understanding"

ADVANCED TRAINING
*****************

-Mobius Institute – Natcom –Advanced vibration training III - 2009
-Mobius Institute – Natcom –Intermediate vibration training II - 2009
-SKF - Vibration Analysis and condition monitoring level 2 - 2007
-TCC Technology Competency Center - Operating and maintenance of pumps - 2006
-TCC Technology Competency Center - Hydraulic & Electro hydraulic system - 2006
-Suez Oil Processing Company- Summer training - 2005
-Egypt Air Company – Summer training - 2004

PERSONAL INFORMATION
********************

Date of birth October 21st 1984.
Nationality Egyptian.
Marital Status Single.
Military Service Exempted.

Keywords: Mechanical Engineer, Condition based maintenance engineer, Vibration analyst, Design Engineer
Certificate online reference: http://www.mobiusinstitute.com/mi/CategoryIIStudents.html
Last update: 22nd July 2009

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 3118)

Go to Search Parameters...

Brief Description

Mining and geological engineer from the university of Liege with a specialization in geophysical methods and geotechnics.

Project Manager, Field Engineer, Commissioning Electrical Switchgear

ISO/ASNT certified Vibration analyst ,More than three years of engineering experience ,Analytical skills and self learning ability,committed to any work unconditionally,Able to work under pressure,Able to liaison between technical groups ,Proven ability to improve efficiency

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Total eleven years of experience in Refineries/Petrochemicals, Chemical & Oil Port Terminal, Offshore Platform projects etc. Presently working with Foster Wheeler, Singapore and Previously worked for prestigious organizations like, Technip-France, Snamprogetti SpA-Italy, Indian Oiltanking, Indo Gulf

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Applying for the post of safety officer in your esteemed concern

Academic Background:M.Sc.Tech. (1987), Applied Geology, Indian School of Mines, Dhanbad, India. Expertise: Engineering Geology and Rock Mechanics in the field of rock engineering

Over 20 Years Industrial, I&E Commissioning Field Service Engineer /Electrical Start-up Engineer

I am Tank and piping/pipeline / structure Superintendant

Environment, safety, health, quality, security, international, lean manfuracturing, construction, operation, management

A Buyer /Expeditor with 18 years Gulf experience

Welding Engineer, ASME,AWS D1.1, Welding Inspection, Welding supervision

Familiar with all steps of equipment, structure fabrication and piping installation as pertinent specification, document control, subcontractor management knowledge, claim representation and site safety conception.

I'm the Safety Manager for the company I'm with now...

Computer Technician

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Cad Drafter/Designer

Automobile related

Mechanical Engineering Graduate EIT - experience at underground mine sites, maintenance planning, drafting in autodesk inventor, physical asset management, underground mine hoist ropes and lubrication, scheduling

Eight years of experience in the field of Mechanical Engineering Works that primarily concerns on overall mechanical system and details design as well as fabrication.

Electrical Engineering, Energy Systems, Power electronics

I am Diploma in Mechanical Engineering. I have adequate knowledge in Auto-Cad in mechanical engineering field. I also have confident experience in X-Steel & SDS2 in steel structure back ground.

Graduate Electrical with Power Electronics

Sub.: Power plant /Utility Electrical Maintenance Engineer

Pipefitter with supervisory and training facilitator experience

Prevent / correct unsafe acts & condition.

Project Manager - Sales - Technical

Education:B.Tech (Civil), Pondicherry Engineering College, Pondicherry Univercity, in 1997. Skills: AutoCAD, MS Office, MS Project and Primavera. Trainings Undergone: Green & Red Code Accrediation program by CED, JAFZA

A Mechanical Engineering graduate from NIT/KREC SURATKAL INDIA with over 19 years of experience in mining sector with over 7 years as Head of Maintenance operation in underground as well as open pit mine.Presently working as SBU head with responsibilities including planning,procurement,budget prep.

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

QA/QC Engineer & Inspector for (Welding, NDT, Piping, Structure, Mechanical, Painting, Coating, Storage Tank, Electrical & Instrument) , Construction Supervisor and Field Engineer

Safety, Health, Quality, Environmental, Waste management, training, investigations, incidents, orientations,contractors, oil and gas, chemicals, construction, hazop, hazards, emergency response, job observations, near misses, safety alerts, hazard communications

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

Quality Management, ISO 9001, ISO 14001, OHSAS 18001, Lead Auditor of IRCA, TUV-CERT

MS-GIS, International MBA, Fluent english and spanish, basic Arabic

Civil Engineer To render quality service to the company that I may be a contributory factor in achieving the company’s objectives.

Qualified HSE ADVISOR offshore, Drilling,production, pipelaying, french,48, immediately available

Project Management, Primavera P3E Scheduler

Instrument Engineering, Fire & Gas Engineering

Manager / Engineer ( HW/SW/QA/Training )

Bachelor of Engineering (Mechanical) from Adiparasakthi Engineering college, Melmaruvathur, Madras university. (April 2002)

Experience with Electrical and Instrumentation & Control Systems design which encompasses project estimating, equipment purchasing, design, build, programming, installation, start-up (commissioning) and field service/troubleshooting for the following: AC motor controls, MCC’s, VFD’s, MOV’s, AOV’s,

Specialized in electrical commissioning engineering substation and protection, protective relay co-ordination power system study, Electrical engineering Diploma

Marine + International Projects Oil & Gas

High Skills in Plant Management, Maintenance, Engineering, Training &Technical Support.

Technical Project Manager

Project Engineer/ Program Manager/ Controls Engineer

To obtain a career in the construction/mining related fields

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out