Resume - Talented ¡¥Senior Corrosion Engineering & Control Professional, Specialized in C...

Misco Jobs

Resume #87217

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE (Beginning with most recent):
Middle East Engineering & Corrosion Control, Qatar (May 2008 to Present) as ¡¥Senior Cathodic Protection Engineer¡¦ (Reporting to General Manager);
„« 02.9.09 to till date: Review & making new technical documents as required for various projects in Qatar.
„« 25.8.09 to 01.9.09: Planning, coordinating, execution & report of DCVG survey on 36 inch x 9km QP new gas pipelines to QG II, III & IV in RasLaffan Industrial City, for FERNAS Construction Company.
„« 09.8.09 to 24.8.09: Review & making new technical documents as required for various projects in Qatar.
„« May 2008 to 08.8.2009: Assigned as ¡¥Cathodic Protection Site Engineer¡¦ for Cathodic Protection Sub-contractor BAC Corrosion Control - UK, at Yemen LNG Pipeline Project, for temporary & permanent Cathodic Protection systems [consisting of 135 magnesium anodes, 300 test points, 45 PRE/s & 45 Coupon/s, 10 Deep Well GB/s, 3 TRU/s, 7 TEG CP Converter/s, 20 Surge Diverter & 10 Solid State Decoupler] installation supervision / QA-QC reports, and testing & commissioning and reports (discontinued by client for requiring new T/R units from BAC-UK) on 38 inch diameter x 322km long cross country main pipeline & 30 inch diameter x 25km transfer pipeline for AMECSPIE HAWK INTERNATIONAL JV COMPANY (The EPC contractor from France), under Yemen LNG Company Limited.
Specialized Oil & Gas Engineering Company Limited, Kingdom of Saudi Arabia (October 2006 to May 2008) as ¡¥Cathodic Protection Projects Engineer¡¦ (Reporting to Branch Manager / Projects Manager);
„« As ¡¥Project Manager¡¦ & Royal Commission approved Engineer In-Charge for overall coordination with client in planning, scheduling, installation supervision, QA/QC reports documents for 104 ICCP systems to reinforcement in cement concrete for SWC Pump Station complete structure & Headwork's complete Structures, at INDUSTRIAL FACILITIES EXPANSION PROJECT 072 / C31R of Royal Commission at Jubail, for main contractor AL-HARBI Trading & Contracting Company.
„« As ¡¥Cathodic Protection Engineer¡¦ for installation supervision, testing & commissioning of 42 shallow vertical anodes for 3 ground bed at RABIGH REFINERY of Saudi Aramco, for main contractor AL-SUWAIDI Industrial Services Company.
„« ¡¥Site Coordinator as NACE Certified & Client (SABIC) approved Cathodic Protection Engineer¡¦ at site for carrying out CIPS & DCVG survey and complete report on 18 Inch x 50km Gas Pipeline from ABAQAIQ GOSP-3 to SAFCO plant. The job involved checking the potential profile along pipeline route & advising the client to make changes in T/R settings, before commencement of actual CIPS / DCVG survey.
„« Prepared Installation Procedures / QA-QC-ITP documents, Testing & Commissioning document, and at site as qualified permit receiver and installation supervision of one DWGB & one distributed SAGB works at SABIC National Methanol Company (IBN SINA).
„« Review of Saudi Aramco Engineering Specifications related to Cathodic Protection.
Middle East Engineering & Corrosion Control, Qatar (September 2005 to March 2006) as ¡¥Cathodic Protection Specialist¡¦ (Reporting to General Manager);
„« Assigned as ¡¥Cathodic Protection Engineer In-Charge¡¦ & Qualified permit receiver for Upgrade of 3 CP Stations [Transformer Rectifiers & Ground beds] at Mesaieed Operations Area - Qatar Petroleum, under field support department (Onshore).
„« Complete Annual monitoring survey data & report for Plant area / Pipelines / AGST bottom / AGST Internal / Marine dock facilities CP systems at Qatar Chemicals Company Limited - Mesaieed.
„« Pre-design survey data & report for Cathodic Protection of firewater pipelines at QAPCO - EP2 expansion project.
„« Planning, Coordination and Delivery of Materials for Sacrificial Anode CP System (Magnesium Ribbon Anodes), for under ground storage tanks (10Nos.) at American Air-base for United Electrical.
„« Review of RFQ for various CP related jobs (office based job).
„« Review of RFQ & Preparing BOQ & Pricing for DAEWOO - Lafan Refinery Project Cathodic Protection systems.
„« Investigations / Checking & Report of Marine Dock Facilities Cathodic Protection Systems at Qatar Chemicals Company Limited.
Oceaneering Inspection, Abu Dhabi, UAE (November 2004 to July 2005) assigned as ¡¥Cathodic Protection Inspector¡¦ with Qatar Gas Company, E & V Inspection Group at Ras Laffan, at Qatar (Reporting to Senior Corrosion Engineer);
„« Monitoring surveys & report, Investigations & report, coordination with maintenance group for maintenance planning and execution for Plant Cathodic Protection systems for buried pipelines / Rebar in cement concrete / AGS Tank bottom / Drain drums / sea water in-take structure [consisting of 42 Cathodic Protection T/R units, ground beds, and associated monitoring facilities].
New Era Group Kuwait Establishment, Ahamady, Kuwait (July 2004 to October 2004) assigned as ¡¥Senior Cathodic Protection Technician¡¦ with Equate Petrochemicals Company (Electrical Maintenance), Shuiaba, Kuwait (Reporting to Electrical Maintenance Engineer);
„« Associated with Second Quarter monitoring surveys & reports, investigations & report, coordination with maintenance contractor for maintenance planning and execution of plant Cathodic Protection systems for buried pipelines & tank/s bottom [consisting of 44 Cathodic Protection T/R units and associated monitoring facilities].
Corrpro Companies Middle East LLC, Sharjah, UAE (June 2001 to April 2004) as ¡¥Technical Manager¡¦ (Reporting to Operations Manager), Also responsible as Project Engineer In-charge for Detailed Engineering & Design, planning, scheduling, co-ordination with clients and supervision for execution of the following projects;
„« ¡¥As Coordinator (office based)¡¦ for getting done the feasibility study and survey for providing cathodic protection to existing complex buried gas pipelines at Oil & Gas Development Company Limited (Pakistan) at Tandoalam, Daru and Kunnar fields.
„« As ¡¥qualified permit receiver¡¦ and execution of testing, commissioning and report complete of close remote ICCP system for plant pipelines at Dubai Aluminium Company limited, in Jabel Ali (UAE).
„« As ¡¥Project Cathodic Protection Engineer In-charge¡¦ for pre-design survey & report, detail engineering & Design, coordinator for materials, installations complete, QA/QC documentation complete, testing & commissioning of 3 remote monitoring and control deep well anode ground bed (remote) ICCP systems (complete) to 2 x 64 inch diameter x 179km twin water pipelines from Fujairah to Sweihan (in Al-Ain -UAE) for Technip Al Jaber Energy services - The main contractor & consultant Fichner, Fujairah Water & Power Project under ministry of power & water directorate.
„« As ¡¥Project Cathodic Protection Engineer In-charge¡¦ for Monitoring of temporary CP Systems on 2 x 64 inch diameter x 179km twin water pipelines and report for Fujairah Water & Power Project, for Technip Al Jaber Energy services - The main contractor.
„« As ¡¥Site Cathodic Protection Engineer In-charge¡¦ for testing, commissioning and reports complete of cross country pipeline/s and plant pipelines, 6 deep well anode ground bed ICCP systems at Qatar Chemicals Company Limited - Mesaieed - Qatar, for Kellogg Brown & Root / Technip (KBRT) - The consortium contractor/s.
„« As ¡¥Site Cathodic Protection Engineer¡¦ for testing, commissioning and reports complete of above ground storage tank (AGST) bottom - 10 grid type ICCP Systems at Qatar Chemicals Company Limited - Mesaieed - Qatar, for CBI - The sub-contractor.
„« As ¡¥Cathodic Protection expert¡¦ for carrying out post commissioning investigations & report for Gas Injection Pilot Project pipelines ICCP Systems at ADCO - ASAB in Abu Dhabi (UAE), Petrotech International Company.
„« As ¡¥Project Cathodic Protection Engineer¡¦ for testing, commissioning and report complete of 48 inch diameter x 112km Maqta - Jabel Ali gas pipeline project 3 ICCP Systems at Abu Dhabi (UAE), for National Petroleum Construction Company, under the client ATHEER / GASCO.
„« ¡¥Coordinator¡¦ for carrying out post commissioning DCVG & CIPS survey and report complete of 48 inch diameter x 112km Maqta - Jabel Ali gas pipeline at Abu Dhabi (UAE), for National Petroleum Construction Company, under the client ATHEER / GASCO.
„« ¡¥Coordinator¡¦ for carrying out post commissioning DCVG & CIPS survey and report complete of 24 inch diameter & 36 inch diameter x 12km each (Detour Section) of Maqta-Taweelah gas pipelines at Abu Dhabi (UAE), for National Petroleum Construction Company, under the client ATHEER / GASCO.
„« As ¡¥Project Cathodic Protection Engineer¡¦ for testing, commissioning and report complete of 24 inch diameter & 36 inch diameter x 12km each (Detour Section) of Maqta-Taweelah gas pipelines ICCP Systems at Abu Dhabi (UAE), for National Petroleum Construction Company, under the client ATHEER / GASCO.
„« As ¡¥Project Cathodic Protection Engineer¡¦ for installation supervision, testing, commissioning and report complete of 10 inch & 4 inch diameter x 24km Pipelines ICCP System for gas supply to desalination plants, and Coordinator for Carrying-out DCVG / CIPS Survey and Reports complete, for National Petroleum Construction Company, under the client GASCO.
„« As ¡¥Site Cathodic Protection Engineer¡¦ for pre-design survey, installation supervision, testing, commissioning of ICCP System and final documentation of 24 inch diameter pipeline for supply of gas to A1 power plant at Taweelah, for National Petroleum Construction Company, under the client GASCO.
„« ¡¥As Coordinator (office based)¡¦ for completing Installation supervision, testing, commissioning of ICCP systems for OMV Kadanwari-Miano Pipelines Project in Pakistan, for Descon -The main contractor, under OGDCL - Pakistan.
„« ¡¥Coordinator¡¦ for complete purchase requisition documents & in procurement of complete Indigenous Cathodic Protection materials for pipeline & jetty ICCP systems at Chennai Petroleum Corporation Limited (CPCL) project at Nagapattinam - India, for Afcons constructions Limited - The main contractor, under consultant Engineers India Limited (EIL).
Heston Kuwait Company, Kuwait - The manpower support contractor (October 1999 to August 2000) as ¡¥Corrosion Technician¡¦ with Kuwait National Petroleum Company, Mina Al Ahamady, Corrosion & Inspection Department (Reporting to Corrosion & Metallurgy Engineer);
„« As ¡¥Corrosion Supervisor¡¦ for various routine corrosion monitoring, cathodic protection monitoring, maintenance & trouble-shooting.
„« As ¡¥Corrosion Supervisor¡¦ for testing & final commissioning of 5 deep well anode ground bed ICCP systems for plant pipelines & structures at acid gas removal project (AGRP) -Licensor process area / Sulphur handling facilities and above ground storage tank (AGST) bottom 2 grid type ICCP systems at boiler No.7 area.
Special Technical Services, Oman (January & February 1999) as ¡¥Cathodic Protection Supervisor¡¦ at Petroleum Development of Oman (Reporting to Senior Cathodic Protection Engineer);
„« ¡¥Crew leader¡¦ for Carrying-out DCVG survey & training technician/s, under pipeline maintenance contract with PDO.
Specialized Oil Services -Asahi JV, Qatar (February 1998 to August 1998) as ¡¥Cathodic Protection Technician¡¦ with Qatar General Petroleum Corporation, under the Inspection & Corrosion (MCI/2) department, Mesaieed (Reporting to Senior Coating & Corrosion Engineer);
„« Routine CP Inspection & survey of existing ICCP systems of around 1000km Oil & Gas pipelines, jetty, tank farm, etc., with about 50 CP station installation & monitoring facilities at various locations.
Unicorr Engineering (Cathodic Protection Contractor) in India (January 1998) as ¡¥Job In-charge & Cathodic Protection Contractor¡¦ with Gujarat Alkalis & Chemicals Limited, Petrochemicals, Vadodara, Gujarat, India (Reporting to Client Manager - Electrical);
„« Trouble shooting services on existing cathodic protection system of 3 x 6 inch diameter x 6.5km Methane and hydrogen (inter bonded) pipelines from Indo Nissan OXO-Chemicals Industries Ltd (INOXIL plant) to Gujarat Alkalis & Chemicals Ltd (GACL plant) at petrochemical township in Vadodara, Gujarat.
Unicorr Engineering (Cathodic Protection Sub-contractor) in India (September 1996 to May 1997) as ¡¥Project In-charge & Cathodic Protection Sub-contractor¡¦ with Skoda Export Company Limited, at Indian Oil Corporation Limited (IOCL) Kandla Bhatinda Pipeline Project New Delhi, India - The main contractor (Reporting to Client Construction Manager & Project Director);
„« Installations, QA/QC reports, testing & commissioning of complete ICCP Systems to 375km long section of cross country pipeline from Rewari in Haryana to Bhatinda in Punjab, and station area ICCP systems complete on lump sum contract [INR: 5200,000 awarded & INR: 3800,000 paid], under QA/QC inspections by representatives of pipeline owner (IOCL) and consultant (EIL) with main contractor (Skoda Export Company Limited).
Unicorr Engineering (Cathodic Protection Sub-contractor) in India (June 1995 to August 1996) as ¡¥Project In-charge & Cathodic Protection Sub-contractor¡¦ with Corrosion Control Services (B) Private Limited - The Turn-key CP Contractor, at Indian Oil Corporation Limited (IOCL) Kandla Bhatinda Pipeline Project New Delhi, India - under Skoda Export Company Limited- The main contractor (Reporting to General Manager / Managing Director & Client Construction Manager);
„« Installations, QA/QC reports, testing & commissioning of complete ICCP Systems to 112km long section of cross country pipeline from KOT in Rajasthan to Salawas in Rajasthan, and station area ICCP systems complete on lump sum contract [INR: 2000,000 awarded & INR: 1600,000 paid], under QA/QC inspections by representatives of pipeline owner (IOCL) and consultant (EIL) with main contractor (Skoda Export Company Limited).
Unicorr Engineering (Cathodic Protection Sub-contractor) in India (February 1995 to May 1995) as ¡¥Cathodic Protection Consultant¡¦ with Mitcorr Services, Vadodara, Gujarat - The Cathodic Protection maintenance contractor, at Gas Authority of India Ltd., Delhi & Noida Region India - HBJ Gas Spur lines - monitoring & maintenance of Cathodic Protection systems (Reporting to Reporting to Owner Dy. Manager - Electrical);
„« Complete cathodic protection systems monitoring surveys, recommendations, report for HBJ consumer pipelines (200km) around Delhi - Noida region for and installation of one remote anode ground bed ICCP station at Indian Oil Corporation Limited in Panipat, with complete manpower support services.
Unicorr Engineering (Cathodic Protection Contractor) in India (May 1994 to November 1994) as ¡¥Project Cathodic Protection Engineer & Cathodic Protection Contractor¡¦ with Indian Petrochemicals Corporation Limited, Maharashtra Gas Cracking Complex in Nagothane, Maharashtra, India - under Pipeline Division (Reporting to Manager - Pipelines);
„« Annual Rate Contract [INR: 300,000 awarded & INR: 300,000 paid] for daily / fortnightly / monthly and quarterly monitoring, interpretation of data and submission reports with recommendations to client, carrying out preventive maintenance schedules, repairs and replacements works on the 175km cross country pipelines ICCP systems consisting of 7 CP stations and associated monitoring facilities.
Unicorr Engineering (Cathodic Protection Sub-contractor) in India (September 1991 to April 1994) as ¡¥Site In-charge¡¦ with Electro Corr Damp Private Limited, Mumbai - The Cathodic Protection Contractor, at Indian Petrochemicals Corporation Limited, Maharashtra Gas Cracking Complex in Nagothane, Maharashtra, India - under Pipeline Division (Reporting to Manager - Pipelines);
„« Annual Rate Contract [INR: 160,0000 awarded & INR: 160,0000 paid] for daily / fortnightly / monthly and quarterly monitoring, interpretation of data and submission reports with recommendations to client, carrying out preventive maintenance schedules, repairs and replacements works on the 175km cross country pipelines ICCP systems consisting of 7 CP stations and associated monitoring facilities.
„« Carrying out Pearson Detection survey and report for 150km onshore pipelines.
Corrosion Control Services (B) Private Limited, Mumbai (June 1988 to August 1991) as ¡¥Senior Cathodic Protection Technician¡¦ (Reporting to Managing Director) responsible for planning, scheduling, co-ordination with clients, execution and / or supervision for execution of the following projects;
X-Ray Engineering India Private Limited, Mumbai (January 1987 to June 1988) as ¡¥Cathodic Protection Supervisor & Corrosion Technician¡¦ (Reporting to Technical Services Manager) responsible for planning, scheduling, co-ordination with clients, execution and / or supervision for execution of the following projects;
ECD Electrons & Electrolysis Private Limited, Mumbai (January 1985 to December 1986) as ¡¥Technician¡¦ for Cathodic Protection works (Reporting to Director) responsible for execution and / or supervision for execution of the following projects;

EDUCATIONAL QUALIFICATIONS
1. Passed Secondary School Certificate Examination from Pune Divisional Board in March 1977.
2. Completed Higher Secondary Certificate Course (Science Stream) at Vani Vidhyalaya Junior College at Mulund in Mumbai from 1978 - 1980.

TECHNICAL QUALIFICATIONS
1. Passed Wireman Apprentice Certificate from Indian Technical Education Society - Mumbai.
2. Passed Wireman Trade Certificate from Indian Institute - Mumbai.
3. Passed Electrician Trade Certificate from Indian Institute - Mumbai.
4. Passed Wireman License Exam of Electricity Directorate in the State of Bahrain.
5. Completed Diploma Level Correspondence Course in Electrical Engineering from Hindustan Institute of Engineering Technology - Madras, India.

PROFESSIONAL QUALIFICATIONS
1. MICorr professional grading certificate # 937 from Institute of Corrosion - UK.
2. NACE International The Corrosion Society - USA Certified 6523 Senior Corrosion Technologist.
3. NACE International India Section, Corrosion Society of India Certified Qualification in Cathodic Protection.
4. NACE International India Section, Corrosion Society of India Certified Qualification in Paint Coating & Lining Inspection.

PROFESSIONAL AFFILIATIONS
1. Individual Senior Member (124924-00) of NACE international The Corrosion Society - USA.
2. Life Fellow Member of SAEST (Society of Advancement for Electrochemical Science & Technology) India.
3. Life Member of Corrosion Society of India (NACE International India Section)
4. Professional Member (204532) of Institute of Corrosion - UK.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 3119)

Go to Search Parameters...

Brief Description

Almost 14 years of experience in the Project engineering, system design and detailed engineering of 400/220 kV AC substations and ¡Ó500 kV HVDC Substations.

25 years experience in OSP project management, inspection, route selection, planning and engineering - Bilingual English/Spanish

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

Transmission Planning Engineer, BES Operations Engineer, PTI/PSSE Consultant

Electrical Engineer with 12 years experience mainly with GE USA in the field of industrial project in steel, power and coal sector

Qualification Bachelor Degree in Civil Engineering Total Professional Experience 14 Years and 2 Months –Include 4 years and 9 months in Singapore & 2 yrs. in Malaysia.

Electrical Engnineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

To work in a physically active and customer focused position using my vocational communication and practical skills and time management. Over 18 years experience as an electrician and supervisor in different firms. Project delivery. Excellent analytical, problem solving skills and breakdown.

B.tech in mechanical engineering with 4+ years of experience in pre-engineering metal building steel structurals

Admisnistrador de sistemas,Systems Administrator,Ingeniero de Sistemas,Systems Engineer,Ingeniero de Software,Software Engineer,Ingeniero Telecomunicaciones,Telecommunications Engineer,Project Manager

I am a professional engineer with over five years of experience in Land Development. I have a strong background in grading, drainage, water, wastewater, and paving design. My project management skills include contract writing, work planning, budget management, invoicing, and A/R collections.

Through 5 years of Collage 5 years on on site experience i have a broad base to develop my careew with the right company.

Registered Civil Engineer with 5 yrs experience as quantity surveyor in contruction industry

Talented ¡¥Senior Corrosion Engineering & Control Professional, Specialized in Cathodic Protection Technology Services¡¦ with extensive background in Project Engineering, Construction Management, Maintenance Management & Specialized Surveys at Oil, Gas, Petrochemicals, Power & Water S

Execute all structural works, finishing works. Aware of survey works. Using computer software proffessionally

Experienced Cad Manager/Project Coordinator. Multi Discipline Design. Proficient with 3d modelling using Autocad, ADT33, Autoplant, CadDuct and MultiSteel. Also experienced in using Microstation, PDMS, Prime Medusa and ProCadam. Engineering background - Structural/Civil.

a. 10 years in Qty. Survey and Cost Estimates for multi-million dollar Int'l Projects. b.10 years in Electrical Power Projects for Power Plants, HV OHL Transmission Lines and Substations. c. 2 years in multi-million dollar Military a

1) GULF EXPERIENCE (21 YEARS). 5 YEARS EMPLOYED AS PROJECT ENGR IN ALMORAM CO SULTANATE OF OMAN. 2)Past 9 years from 1989 to 1998 worked as E& M Engineer at UNITED CONTRACTING Company. 3)3) 7 Years ( 1977 – 1984) worked as maintenance supervisor in ARAMCO at SAUDI ARABIA.

Full Project Life-Cycle Control and Maintenance Implementation.

18 years of experience in respective fields

Senior Electrical Engineer , MEP Manager

BS Electronics and Communications Engineering, Proficient in Microsoft Office XP (Word, Excel, and PowerPoint), Taken up CCNA Sem 1-4 of CISCO Networking Academy, Knowledgeable in Autocad,

primavera

MECHANICAL ENGINEER in the field of construction

I am a Pro-Engineer Designer with experience up to Wildfire 3.0, Pdmlink 8.0 & 9.0, SAP, and Intralink 3.4.

I am Civil / Structural Engineer with 25 years of experience. Presenly I am working as a Lead Engineer for last 10 years. I work as a hands-on lead and comfortable with checking of calculations, doing schematic design and providing site support.

Civil & Structural & QAQC Construction Superintendent

Hands on experience in planning, erection, commissioning and trouble shooting of Cement Plant Machinery. Additional experience in Refractories for kiln and Steel Casting parts for Cement Plants. Diploma In Mechanical Engineering (4 years - Industry Integerated from Larsen & Toubro Institute)

Customer support , service engineer, bio medical engineer

Quantity Surveyor able to takeoff, variation claims, valuation, computers,caddrawing

Civil engineer

Architectural draughtsman, my experance is 8 yeairs completed and hands-on training with Architectural, Mechanical, Civil and Structural DraftingƒnExperienced with AutoCAD 2004 - 2009,Proficient with Windows: MS Word, MS Excel, MS Works, MS Outlook, MSƒnPowerPoint,

A Senior Project Engineer with a wide range of experience in Construction and Maintenance. Able to work on own initiative and as a part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve the planned objectives.

Phisicyst with Power Electronics specialization

Diploma civil engineer from Mumbai(1st class with distinction)have 23 years of actual field experience of executing various types of civil works in & around Mumbai & pune.I hereby attach my C.V.along with this letter for your consideration & evalution.

* Construction Project Manager * Engineering Design Manager * Civil/Structural Engineer

Primavera P6/P3, MS Project, MS Office

NDT level II, piping fabrication and errection, welding inspection etc.

Bachelor in Engineering - Metallurgical Engineering.

Developing logic’s with RSLogix 5, 500, 5000 For AB Controllers, Simatic Manager for Siemens and Unity Pro for Schneider.

Mechanical Engineer with 4 years experience

I am having more than 3 years experience in the field of construction ,troubleshooting and commissioning in istrumentation field.

F.S.C+Diploma in Refrageration And Air Conditioning 3years+autocad course

i am certificate hlder majoring in land surveying seeking for vacancies. Experience in building construction and infrastructure work for 11 years. Very famliar with all kind of surveying instrument Total Station. I have knowledge in AutoCAD Land Development Desktop.

5 years cad customisation autolisp, visual lisp, vb.net, structural design software development, connection design

Objective: Joining Challenge job in a progressive organization in which I can be best utilized and developed according to my abilities and performance efficiency.

DETAIL qa / q WORK IN PIPING

Piping Designer, MicroStation, Power (Nuclear, Fossil, etc.), Petrochemical, Chemical, Heavy Industrial.

Construction Laborer Expert 0-2 years Customer Service Face-to-Face Support Expert 10+ years Engineering Applications / Technical Support Strong 5-10 years Engineering Electrical Strong 5-10 years Engineering Field Service Expert 10+ years Engineering Maintenance Expert 5-10 years

I am mechanical engineer having 17 years of experience in oil and gas construction industry both onshore and offshore. Currently located in Tunisia with petrofac for their onshore gas development project. I am well familiar in all standards and codes applicable for industry,

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out