Resume - More than 2.5 + years of experiences in the field of Planning as a Planning Engg...

Misco Jobs

Resume #87399

CONTACT INFORMATION:
View contact information...

Carrier Objective:

To set my steps firmly into this world with confidence, with desire to excel in any field of my job responsibility, learn and mould myself from various challenges around me and evolve into a better competent professional and a better human being. Truly quality conscious on building up quality within the system on par with the National and International Standards.

Job Profile
More than 2.5 + years of rich, in-depth, varied experiences in the field of Project Planning & scheduling for Engineering, Procurement, and Construction (EPC) of Pipeline (Oil and Gas - Refinery) projects. Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of Engineering, Procurement, & Construction (EPC) deliverables and activities for Pipeline (Oil and Gas - Refinery) projects.

Professional Experience:
Organization: PUNJ LLOYD LTD, DOHA, QATAR. (DEC 2007 – Till date.)
Designation: Planning Engineer.
Project: 18"x42Kms Multi Product Pipeline Project.
Description of the project: The project comprises of the new 18" Multi-product pipeline from QP Refinery at Mesaieed to Doha Depot consist of 42 Km, and emergency loading system for the multi-products and LPG at the QP Refinery. Pipeline block sectionalizing valves which are to be installed along the pipeline within BSV-3.The project also envisages decommissioning and demolition of the existing multi-product emergency loading system inside Mesaieed QP Refinery.
Client: Qatar Petroleum.
Consultant: Nama Mott-Mac Donald.
Industry: Oil / Gas.
Department: Project Management.
Project Cost: 110.5 Million USD
Responsibilities:

Responsible for the planning, supervision of all activities comprising the project.
Schedule the preparation for construction in primavera project planner with resource loading.
Determines actual project accomplishment and evaluates general contractor's billings and Project Closeout.
Preparation of Planning Documents, Construction Schedules and budgets, Billing Schedule, cash Inflow/outflow.
Preparation of Daily Progress Reports, Weekly Progress Reports, Look-ahead schedule and Recovery plans to achieve the targets.
Construction progress updating on monthly basis in primavera.
Tracking, following-up and reporting the project progress.
Working on web paged ORACLE 11i for processing Project Invoices and generating Standard Purchase Order.
Co-ordination with Engineering consultants and Procurement department.
Presentations in Project Review Meetings for Client.
Monitoring variations orders and ensure changes are updated in the project manual.
Submission of Specifications and procedures to Client for review/approval.
Preparation of Manpower and Equipment List.
Preparation of the Project close-out Report and the schedule.
Preparation of Productivity feed-back data to Project Control Department and Commercial Department.

Organization: AYOKI FABRICON PVT LTD,RAIPUR, INDIA (APR 2007-NOV 2007)
Designation: Planning Engineer.
Project: Ambuja Cement Thermal Power Plant project.
Description of the project: Construction & Installation of three Thermal Power Plants (70TPH, 80TPH & 135TPH).
Client: Ambuja Cement Ltd.
Consultant: Thermax India Ltd.
Department: Project Management.
Responsibilities:

Responsible for the planning, supervision of all activities comprising the project.
Project execution, dealing with clients for necessary approvals and deviations.
Preparation of planning documents and construction schedules.
Preparation of Daily Progress report, Weekly Progress Report and Monthly Progress Report.
Generation of Progress Curves, Manpower Histograms and Key Quantity Curve.
Establish project material requirements.
Preparation of Monthly manpower productivity analysis and manpower histogram.
Plotting Progress S-Curves Planned Vs Actual.
Educational Qualifications:
QUALIFICATION UNIVERSITY YEAR OF PASSING
B.E. Mechanical Anna University, Tamil Nadu, India 2003 - 2007
12th Kerala State Board, Kerala, India 2001 - 2003
10th Kerala State Board, Kerala, India 2000 – 2001

Additional Qualification:
ASNT Level II - Radiography Testing.
ASNT Level II - Ultrasonic Testing.
ASNT Level II - Magnetic Particle Testing.
ASNT Level II - Liquid Penetrant Testing
Technical Skills:
Proficient in PRIMAVERA PROJECT PLANNER (3.1, 5.0 e/c, 6.0 e/c).
MS Project Planner.
ORACLE 11 I for generating Standard Purchase Order.
Application Software's: MS Word, Excel, PowerPoint, Auto CAD 2006/2007 and 2008.
Achievements:
Member of ASME (9464173) (American Society for Mechanical Engineers).
Conducting H2S/BA Awareness course from Qatar Petroleum.

Personal Details:
DOB - 19th December 1985
Languages Known - English, Hindi, Tamil and Malayalam.
Nationality - Indian.
Sex / Marital Status - Male / Single.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 3123)

Go to Search Parameters...

Brief Description

Have 4 years of experience in design and construction of Highways, Pre-Stressed concrete bridges and residential and industrial buildings.

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Exposed in several construction company involved in Engineering Procurement Installation Commissioning and Build Operate Transfer type of Contract at Oil & Gas, Petrochemical and Power Plants. In addition to that I’ve been in the Operation and Maintenance a couple of years at the Refinery and Petroc

Plant Inspector or Quality Assurance/Control Inspector API 510/ AWS CWI

Senior piping designer

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

A suitable position in the area of electrical schematic drawings and designing of electrical panel boards, cable layouts, etc. and/or designing of electronic circuit layout and PCB by using CAD software .

Mechanical Engineer

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Experice engineer with project engineering and project managemnt

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Transmission Engineer- power system circuit and substation design & planning

Mechanical Engineer, with 14 years exp, expertise in construction, marines structures, fabrication of offshore, marine structures and ship repairs, quantity surveying, planning and scheduling, cost estmating

Instrumentation & Control Engineer with over 14 year experience in Basic & Detailed Engineering, Supervision, Commissioning of off shore / on shore fields. Profitional in Field Instrument, DCS, Automation, HV/LV Elect Switchgears.

Post graduate Engineer with experience in marketing, engineering, insurance survey.

Can estimate cost for any construction project

P.E. Electrical with 20+ vears, Specilize in power distribution and electrical maintenance for mining and heavy industrial equipment

APPLY FOR THE POST OF QA /QC API 510 PRESSURE VESSEL INSPECTOR – CSWIP 3.1 WELDING INSPECTOR, BGAS-CSWIP PAINTING INSPECTOR, NDT, DOCUMENTATION

I am an Oil & Gas Facilities Project Engineer (B.Sc. in Mechanical Engineering, 1980) My duties are to develop, supervise, and execute design, procurement and construction of engineered hydrocarbon projects.

Soil investigation and plinning work

Testing & comissioning of control panels with good knowledge of design.

Have good working knowledge of AutoCad 2002, AutoCad 2004, Adobe PhotoShop, CorelDraw, Microsoft Excel, Microsoft Word, 3D Max Studio, A.D.T., Micro Station and Internet.

I want to work as a project engineer and/or site engineer

Three and half year experience in CADD software like Unigraphics, AutoCAD 2000 for 3D modeling, Composite Design, Assembling and detail drafting.Knowledge in fundamentals of Computer Graphics under Unigraphics for Helicopter components, assembly, subassembly, part drawings etc.

12 yrs. of underground mining, Electrician, All around maintance Man, Heavy Equipment Operator, Gas & Diesel Mechanic, Small Engine Repair, Carpenter, Mason. Plumbling.

10 years drafting experience for AT&T, and Verizon, Read and interpret construction notes and drawings. I strive for excellence in everything I do.

Experienced Cad Operator in Architectual, Civil, & Telecomunications

I am a post graduate in Production engineering with over 18 years of experience in heavy earth moving equipment and auto vehicles

Electrical Project Planning Engineer (Primavera P3 & P6) with MBA Degree

Project, Project manager, maintenance, maintenance manager, production, production manager, mining, heavy equipment

Controls Engineer, ControlLogix, Manufacturing Engineer, Engineering Manager, PLC Programming, Robotics, Machine Vision

Mechanical design Post Graduate with 9 Years of experience in process industry and design of tank, vessels, EPC packages, other static and rotating equipments like pumps, compressors, turbines, agitators, etc.

Lincensed Professional Land Surveyor

Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,

Mechanical foreman and non-destructiv testing inspector

Environmental Management & Permitting/Mining - Oil & Gas - Power - Infrastructure - Construction/Domestic (USA) & International

Senior Mechanical Draughtsman(MEP)

6 G WELDING (GTAW / SMAW) (welder job)

MECHANICAL/ PIPING/ FABRICATION ENGINEER 4 YEAR TOTAL EXPERIENCE INCLUDES 2 YEAR SAUDI AABIA EXPERIENCE

9 + year Experienced senior Document Controller having 5+ year Overseas experiance in india,Dubai and presently working in singaopre , in a world leading EPCM company

CIVIL ENGINEER WITH 17 YEARS EXPERIENCE IN BUILDINGS, INFRASTRUCTURES, TREATMENT PLANT AND OIL & GAS INDUSTRY

Marine chief engineer(unlimited)- shipbuilding supt, A team player,good manmanagement qualities,likes to involve in a project from concept to completion within strict time/budget controls.

Sir, Are You seeking an intelligent Graduate Mechanical engineer with extensive problem solving and technical skills? If so, my 3 Yr experience in mechanical engineering background may be of interest to you. Thanking you for your time and consideration.

civil engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out