Resume - NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

Misco Jobs

Resume #87453

CONTACT INFORMATION:
View contact information...

Summary

Global Corrosion Engineer/Chemical/Mechanical consultant manager, with 30 years of broad quality oversight for major process capital equipment, field mechanical integrity reports, DOT chemical shipping classification, electrochemical analyses and R& D process engineering compatibility issues. Working knowledge of API, ASME, and NACE engineering codes. Well trained in leading failure investigations, extending the life of chemical processes, establishing new purchasing engineering standards and eliminating the effects of costly corrosive agents thereby improving processes and savings millions of dollars. Experienced in dealing with hundreds of different corrosive liquids and gases.

* Saved Hercules $ 6.7 MM over 3 years through improvements in materials handling, rotating equipment design, and dryer construction changes.

* Saved $ 32 MM over the last 10 years through projects this extended the life of capital equipment, eliminating costly field process failures, and by improving product quality for both Colgate Palmolive and Hercules.

* Certified by NACE International &CESB as a Corrosion Specialist, Materials Selection Design Specialist and Sr. Corrosion Technologist.

Professional Experience

Sr. Staff Engineer at Hercules Inc. July 2006 – July 31, 2009 (3 years 1 month)

* Saved $ 1.2 MM through the alteration of materials handling of cutter blades which eliminated compound fretting fatigue. This project reduced the chance of catastrophic failure of a cutters by practically 100%

* Conducted failure analysis of critical processing mixer leading to redesign by engineering vendor eliminating blade tip fatigue and process shutdowns saving $ 2.0 MM.

* Led international team in the investigation of two failed coiled serpentine heat exchanger dryers to determine the root cause of the failures. Dimensional modifications were made to one dryer while the other needed an upgrade in materials of construction and welding procedures at a cost savings of $ 2.5 MM.

* Extended the life of critical Kymene reactors to allow for continued operation without replacement saving $ 1.0 MM.

* Revised corporate engineering standards to bring them up to date including, FRP composite construction, Coatings and Linings as well as revision of welding methodology specifications.

* Managed corrosion lab studies and interpreted compatibility parameters for R&D and field engineers.

* Crafted materials engineering specifications for sales organization.

Sr. Engineer Colgate Palmolive Co. November 1984 – November 2004

* New formulated super fatted soap dryers developed pitting corrosion after 3 years of service. A failure analysis and several plant inspections were conducted. Recommended higher throughput velocities and materials of construction upgrade from 316 SS to Al6XN saving $ 2 MM.

* Spray detergent towers around the globe were experiencing pernicious internal corrosion Made several trips to South America to internally inspect the towers. The towers were experiencing condensation corrosion at the explosion door level mid way up. Made recommendations to shore up tower with new internal fillet welded carbon steel plate and additional insulation to prevent continued condensation corrosion saving over $ 5 MM worldwide.

* Inspection of Glycerin recovery evaporators in Brazil revealed stress corrosion cracking after 5 years of service requiring a change in material of construction. Recommendation was made to change metallurgy to 2205 duplex alloy. The evaporators were repaired with this alloy with no further corrosion issues around the globe saving $ 7 MM

* High Speed Rotary valves in abrasive toothpaste formulas were experiencing erosion pitting corrosion around the world. Made recommendation to machine new valve out of Nitronic 60 alloy. This resolved the erosion issue and eliminated the chance for metal contamination in toothpaste saving $ 2 MM worldwide.

* Resolved a Dual laminate FRP tank failed in hypochlorite service in Europe. Moved away from lined FRP to cross-linked HDPE saving $ 1 MM.

* Led a global team of packaging engineers and scientists in resolving critical Soft-soap Pump Springs crevice corrosion by testing and reformulation eliminating the issue with a worldwide saving to the business of $ 10 MM.

* Developed an eight-hour informative Corrosion course on engineering materials and chemistry. An overview of significant company corrosion issues and solutions was given. It included sections on materials selection, engineering design, corrosion testing and a how to checklist for plant corrosion inspections.

* Developed a Materials Engineering corrosion database that was used extensively by engineers and the manufacturing plants to select materials of construction for Colgate Palmolive co. saving $ 5 MM worldwide.

FMC- Metallurgical Corrosion Engineer 1981-1984

Failure analysis of machine parts and corrosion studies for FMC that included fractography, metalography, and corrosion testing. Work centered on aluminum alloy selection for the Army fighting vehicles including the Bradley.

EDUCATION/PROFESSIONAL DEVELOPMENT

Wayne State University, Detroit, Michigan. BS Material Science& Engineering, Chemistry Minor. Completed numerous ASM and NACE professional development courses. Completed UCLA extension course on Electrochemistry and uses for corrosion testing. Failure Analysis courses were taken and completed through the Society of Professional Advancement. Participated in NACE annual corrosion society meetings and section meetings for over 25 years while obtaining all NACE certifications.

OBJECTIVE:
------------
Looking for a varied assignment corrosion engineering job. Looking after mechanical integrity, corrosion control, failure analysis, chemical inhibition and monitoring, project engineering work.
------------

ADDITIONAL INFORMATION:
------------
U.S. citizen, enjoy golf, swimming, traveling, and reading.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 3123)

Go to Search Parameters...

Brief Description

PROFESSIONAL SKILLS: AutoCAD (All Old & Latest Version), Aconex (Online Document Management System) , MS-Word , MS-Excel , MS- Power Point and Internet etc.

•Knowledgeable in PLC troubleshooting ( Allen Bradley & Siemens Step 7, Omron and Keyence). •With experience in designing low voltage control systems. With experience in machine servicing and troubleshooting •Knowledgeable in Pneumatic & Electro-pneumatic system troubleshooting. •With background in

Geolgist having 2 year experience in construction

Design and construction in bridge and road

D.A.E in Electronics and from last 7 years i am working in the field of CCTV & SECURITY SYSTEM as a SUB ENGINNIER +SALES ENGINNIER IN SAUDI ARABIA

Experienced in drafting commercial buildings, residential for permit processing and for shop drawing.

I am a mechanical engineer with 10 years experience in Material handling, Steel structurals, PEB, Steel buildings industries

Architect/landscape designer/graphics person

6 years from Military with lots of surveying .

Co-Ordination with all agents & Sub-contractors.

Effective in Inspection Trends and Hazards Identification as per OSHA requirements and standards. Has good ability in presentation of safety reports to higher authorities

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

Have one year job experience as a Ship design and Ms. degree in Naval Architecture subject .

bachelor of engineering (mechanical)

Direct and supervise work of subordinate members of surveying parties.

A highly motivated and dynamic Civil engineer with 10 years of experience in designing commercial and industrial structures. I am looking for a position of Civil Engineer/ Design Engineer in an organization where my experience and knowledge can be used to the best.

Over ten years hands -on experience in XRF spectrometry in cement and steel industry

5 years working experiance as a QA/QC Engineer

Senior manager maintenance of Drilling water well & Mining drills and Screw compressors, man power Management, Guiding and training the service engineers, maintaining records and monitor the performance

Willing and able to perform ones job with less supervision

3d visualizer, archl draftman, interior designer, renderer, max/viz/photoshop/ vray, architect

i m very hardworker

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

I have worked in the area of Geological and Geotechnical Engineering for over six years now. I am a quick learner and can adapt to other earth engineering fields. I would be a valuable asset to any firm that would give me a chance at employment.

i have 3 years of experience in structure analysis and design for industrial structures, substaton structures, Material handling plant structures. i am having strong hand on STAADPro and Autocad software.

Knowledge in Project management skills like Production control ,Costing ,Project control /Expediting ,Scheduling(Using MS Project), planning ,Preparing Bill of materials ,Procure materials ,Sub contractor control ,Quality activities ,Documents review, ITP preparations, Client meetings ,Design involv

POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE

skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME

B. Tech (Electrical) with more than 15 years experience in project management, design, engineering, installation and commissioning of electrical & control system in combined cycle power plants and substations

A highly accomplished gas turbine field engineer and power generation equipment service director. Experienced in turbo-electric machinery installation and maintenance, asset and contract management, profit and loss finance, electro-mechanical troubleshooting, quality control, and staff management.

Enclosed please find my detailed resume for Structural Engineer job openings you may have. As my resume will attest, I appear to have excellent qualifications for this position

Mechanical engineer (naval welding) with 15 years experience seeking a job as supervisor(superintendent engineer).

Well experienced Project Architect / Coordinator /Auto Cad Designer / Quantity Surveyor

Feasibility studies, Process Design & Consultation, process Development , Project Management, Electro-mechanical installation, Pre-Commissioning & Commissioning, Start – up & Operation of Industrial Projects

Health, Safety Environment Engineer/ officer &

Marine Civil Construction Supervisor

Comprehensive problem solving abilities, good verbal and written communication skills, Ability to deal with people diplomatically, willingness to learn, Team facilitator.

Bachelor of Science of Electrical Engineer, Drafting Aide Certificate AutoCAD 2009, CAD Operator Certificate AutoCAD 2009, Member of Phi Theta Kappa International Honor Society, Member of National Technical Honor Society, Dean List for 2008-2009

Senior Structural Designer/Construction Support Specialist

I'm A Civil Engineer graduate with 14 years experience in the Gulf country seeking for new job.

17 years of expereince in the field of telecom

Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.

Registered Safety Officer (IBOESH, USA), Registered Civil Engineer-Philippines, IASP, IADC, RIGPASS Certified

Civil Engineer specialized on Structures working towards Masters Degree.

I am a qualified mechanical Engineer specialized in Acoustics

Mechanical Supervisor

Planning & Scheduling Engineer with more than 4 years experience in India & Gulf

Almost 14 years of experience in the Project engineering, system design and detailed engineering of 400/220 kV AC substations and ¡Ó500 kV HVDC Substations.

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out