Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #87614
next resume »»
CONTACT INFORMATION:
View contact information...
--Qualifications
Effective accomplishing projects and tasks in multidisciplinary teams and as an individual.
Sharp analytical, research, communication, and problem solving skills.
Excellent attention to detail accompanied with an outstanding safety record.
--Education
Bachelor of Science: Geology, Geology Concentration, Western Washington University, Bellingham Washington,
GPA: 3.63 Graduation: June 2009.
-Relevant Course Work: Field Camp Economic Geology
Geomorphology Mineralogy Glacial Geology
Structural Geology Petrology Adv. Igneous Petrology
Geophysics Stratigraphy & Sedimentation Petrography
GIS Probability & Statistics Principals of Orogeny
-Field Camp TA: Assisted teaching students to create maps and structural interpretations based on surface observations.
-Primary Leadership Development Course (PLDC), March 2005, developed leadership and management skills during over 390 hours of instruction.
-Relevant Experience
Mapping and Image Interpretation Experience:
Mapped the Precambrian Ashe and Alligator Back Formations for the USGS.
Produced both Quaternary and bedrock maps, as well as subsurface interpretations.
Analyzed LIDAR imagery, stereoscopic air photos, maps, and subsurface data.
-Taught classes on land navigation and map analysis for the US Army.
Technical Experience:
Proficient with Microsoft Office, Arc GIS, MATLAB; familiar with CAD and Databases.
Operated XRF, XRD, GFAA, SEM-EDS, GPR, and water quality analysis systems.
Extensive experience with field logistics and equipment operation with the USGS and Army.
Research:
Tested possible equilibrium conditions for the Mt. St. Helens Glacier.
Created a quantitative model for water velocity vs: grain mass transport in fluvial systems
-Employment History
USGS-NAGT Intern, USGS Mapping of Blue Ridge Parkway, Reston VA. Summer 2009
Tour Bus Driver/Guide, Princess Tours, Denali Princess Lodge, Denali AK. Summer 2007
Fork Lift Supervisor, Rader Farms Inc, Lyndon WA. Summer 2006
Sergeant, Calvary Scout, United States Army, Vilseck, Germany. 2001- 2005
Veteran Status: Honorable Discharge from Active Duty 2005; Global War on Terrorism Expeditionary Metal awarded 2004.
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 2201 to 2250 of 3092)
Go to Search Parameters...
Brief Description
Construction Project Manager, Property Development Manager
Olympic Ice Skating Rink, Muliti-storey, Apartments, Precast Panels, Site Retention, Post Tensioned slabs, Structural Steel,
Self-motivated Draftsman proficient in AutoCAD and manual drafting with 750 hours of theory and 750 hours of hands on experience. Eager to contribute time and effort to benefit a respectable company. Responsible, hardworking and dependable.
To obtain a challenging position that utilizes proven experience and skills.
Excellent interpersonal, oral and written communication skills, Good computer skills (MS-Word, MS-Excel, MS-Power Point, MS-Access, Oracle etc.). Excellent knowledge and Training on ISO 9001, ISO 14001, OSHA and OHSAS 18001. Master degree, Diploma in Safety, Training on HSE.
A dedicated team player with excellent problem-solving skills. Valuable mechanical engineering experience in a variety of work environments: fabrication, project management, design in high tech, aerospace, automobile and offshore industries, cost control, QA/QC. AutoCAD, SACS, Inventor, Solid Edge
Primavera Experience
11 years of experience in the Oil & Gas, Carried out various endeavours including feasibility study, basic engineering, detailed engineering, construction engineering and the supervision of yard construction and offshore installation.
Have certificate in Mechanical Engineering drafting with 12years experience in handling Autocad programme. currently based in Riyadh, KSA and handling drawing for Architectural, C&S & MEP.
I have completed B.E,(Electrical & Electronics Engg) in may 2006 with 70% as the aggregate from Anna University(Kamban engg College) India.Having 2 years experience in transformer manufacture, Being given to understand that you are entertaining candidates for various positions
B.E. / 24Yrs / REC, Motilal Nehru, Allahabad. Work Experience: Projects/ Construction/ Consultancy/ Planning – 10yrs. Maintenance/ Planning/ ISO 9000 Implementation – 12yrs. Trainer / Q A & Q C /Turnover Documentation – 2yrs.
B.E. (Mechanical) with Piping Engineering from Indian Institute Of Technology, Mumbai.
Good in AutoCad, 6 years experince in 4 shipyards with main activity shipbuilding and repairing, youg, able to lear and fast adapting in diferent conditions.
Telecommunications Engineer, with Bsc. In Telecommunications and Electronics, present occupation on Telecommunications Network Resource Management, Planning & Design Telecommunication Circuits Serving Electrical Networks. Consultant Engineer: Alarabi Engineering Consultants.
Senior Electrical Engineer with over 20 years of manufacturing, industrial, chemical, and power plant field experience.
Industrial automation with specilisation in RTU, PLC, Testing and commissioning of MCC, PCPwith sound knowledge on embeddedsystem, RTOS-VX WORKS
Educated to a high level with well developed interpersonal skills. A proactive, result orientated style of working, is supported by a broad range of practical skills and knowledge. A keen sense of self worth and ambition are tempered by a proven ability to achieve within a professional environment.
A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique
E&I QC Inspector
MEP Consultant, Space Planning for all Mechanical Services,Specialised in HVAC & Fir Fighting Services,Skilled with Cooling Load Calculating Softwares.Lead or o-ordinate the Team is easiser.
Building Seismic Design , Evaluation of Structures, Bridge Design
Integrated Buidling Systems Manager, Project Manager, IT Manager, CMMS
Rotating Equipment Engineer with 9 yr Experience
I am an engineer holding a university degree (B.Sc) in electrical engineering Aden - Yemen, I have 8 years experience, 5 years in electrical & electronics maintenance and 4 years experience in a Company in Saudi Arabia has Industrial agencies responsible of after sales services
Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.
laboratory, mechanical, electrical, computer, supervisory and leadership skils
13 Years with Onshore & Off shore, OIL & GAS refinery & Shutdown .
Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.
I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro
Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.
For the past 11 (Eleven) years of my working experience as Equipment Site Supervisor/ QC Inspector/QC Supervisor, I had gained experience & Knowledge on Quality Awareness. Performing Hold, Witness & Surveillance inspections based on standard requirements and other related presentations
Project Management. Scheduling, Ms.Project, Primavera, Budgetting. Engineering. QS, AUTOCAD, Structure Analysis, SAP2000, Site Engineer.
Highly skilled engineering and construction management professional.
Qualifications: B.E (Mechanical). Graduated with second class, first division honors. Have an MEP consulting background with over 2 years experience. Advanced in: AutoCAD, Solid Works, Excel, Visual Basic programming, Word, TRACE heatload and Matlab programming.
Electrical engineering major in power .
As Geosciences Engineer, 13 years of experience. Exploration and Production mines
Electronics and communication Engineer
GSM/CDMA Project Manager
Installation and commissioning, project management
Experienced & Seasoned Engineer
Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.
Total 13 years experience in Contract Administration, Quantity Survey, and Procurement functions of offshore oil and gas projects, onshore petrochemical and fertilizer projects representing both Consultant and Contractor.
More than 10 years of rich, in-depth, varied experiences in the field of Project Quality Assurance / Quality Control, Project coordination, execution, Testing and Pre-commissioning of diverse E & I and CP system activities in Refineries, Oil & Gas Plant (Onshore & Offshore), Fertilizers Plant, etc.
I am a target oriented person with vast experience in Oil and Gas Construction Projects, I have experience in the safe Erection, Dismantling and Modifications of all Scaffolds in accordance with BS 5973 Standards, Inspection of scaffold materials and fall protection systems, documentation of scaffol
Contracts Manager
Civil Engineer with Project Control experience and knowledge of Primavera (P3)
A chemist with technical skills trainings in Industrial Process Controls, Advanced PLC, Hydaulic Industrial Controls, PLC, Electro-Pneumatics, Calibration for Process Instrumentation, Advanced Industrial Motor Controls, Pneumatic Industrial Controls & Industrial Electrician
Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic
Project maintenance manager/planner/trainer
9 years of extensive experience in Project Management, Planning and Execution involving fabrication, erection & commissioning of Piping & Equipments in Nuclear Facilities, Petrochemicals, Aluminum Smelter and Gold Mine Projects.
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
[ 45 ]
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Construction;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com