Resume - I am a Postgraduate Civil Engineer trained in "PROFESSIONALS IN PROJECT MANAGEME...

Misco Jobs

Resume #87834

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Post-Graduate Education:

1) Master of Technology in Construction Technology at B.M.S.C.E, Bangalore, India Affiliated to Vishveswaraiah Technological University, Approved by A.I.C.T.E and Accredited by NBA.
Aggregate: 78%
Year of Completion: 2006

Under-Graduate Education:

Bachelor of Engineering in Civil Engineering at G.N.D.E.C, Affiliated to Vishveswaraiah Technological University, Belgaum, Karnataka and Approved by A.I.C.T.E India
Aggregate: 69.2 %
Year of Completion: 2004

OBJECTIVE:
------------
To serve in an esteemed organization, holding a responsible position where in I can apply my creative and technical skills, ensuring credible performance and working for the improvements of the standards of the organization in the field of Civil Engineering

WORK EXPERIENCE:
------------
Worked for GAMMON INDIA LIMITED from June 2007 to July 2008

Trained in "PROFFESSIONALS IN Project management software Primavera 6.1 & MY PRIMAVERA" from Cadd Centre.

Trained for Eight week industrial project training at ESSAR PROJECTS LIMITED, Jamnagar, Gujarat, India.

EDUCATION & CERTIFICATION:
------------
1) Master of Technology in Construction Technology at B.M.S.C.E, Bangalore, India Affiliated to Vishveswaraiah Technological University, Approved by A.I.C.T.E and Accredited by NBA.
Aggregate: 78%
Year of Completion: 2006

2) Bachelor of Engineering in Civil Engineering at G.N.D.E.C, Affiliated to Vishveswaraiah Technological University, Belgaum, Karnataka and Approved by A.I.C.T.E India
Aggregate: 69.2 %
Year of Completion: 2004

3)Trained in "PROFFESSIONALS IN Project management software Primavera 6.1 & MY PRIMAVERA" from Cadd Centre.

4)I am awarded with technical paper titled "Crack Width prediction in R/C flexural members: A fracture mechanics approach", was selected for the prestigious international conference on Fracture mechanics of concrete (Framcos 06), which was held in Italy on June 2007. This technical paper is published in international civil engineering magazine: Framcos 06 (www.framcos6.org)

ADDITIONAL INFORMATION:
------------
I am awarded with technical paper titled "Crack Width prediction in R/C flexural members: A fracture mechanics approach", was selected for the prestigious international conference on Fracture mechanics of concrete (Framcos 06), which was held in Italy on June 2007. This technical paper is published in international civil engineering magazine: Framcos 06 (www.framcos6.org)
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 3123)

Go to Search Parameters...

Brief Description

ZTE Pakistan (Pvt.) Limited: - Currently I am working as MSS Engineer in the O&M Team in the Telecard CDMA WLL Project .Installed & Commissioned ZTE ZXC-10 MSC, HLR..Operation & Maintenance of ZTE CDMA Network Elements like ZTE MSC, HLR and VLR.

B.Sc. in Civil Engineering (CE), Bangladesh University of Engineering & Technology (BUET), Merit scholarship recipient in every under graduate level (Second grade)

IM Supervisor, DM Manager, Expediter, Technical Writing skills in authoring procedures, Business Development with Green conceptual ideas

I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.

I have wide experience (more than 22 Years) in Maintenance & Project field in Ammonia Refrigeration Plant, ice-cream, Dairy & Pharmaceutical Industries.

Supervisor maintenance and of trades/millwright / mechanic/water/rail

A results-focused manager and leader who drives project teams to deliver outstanding results. Professional Engineer with 21 years of diverse experience in the hydrocarbon processing and minerals processing industries. Has exceptional experience on owner & EPCM teams.

Heavy Industrial Fitter with extensive experience on Fixed & Mobile Plant & Machinery. I have worked in Cross Cultures as a Mechanical Trainer/Supervisor.

Geodetic Engineer exposed to various types of horizontal and vertical survey and can handle different geodetic engineering position.

Geologist / Geotechnical engineer

Piping Field Planner/Engineer through 15 plus years journeyman experiece in the industrial construction industry.

Working in Saipem and SNC lavalin joint venture Saudi Aramco water supply and injection project in SA, as a Instrument Pre-commissioning Supervisor (sub contract) last one year.

Over six years of experience in geotechnical engineering including earthquake engineering and mining engineering. Has performed numerous analyses in ground deformation, lateral spread and foundation settlements caused by static and seismic loading using both traditional analytical methods and advanc

Skills include: mechanical maintenance management, process engineering, project management, documentation and training, planning, procurement and contract management, budgeting, and sales.

INSTALLATION PIPELINES

Broad knowledge base and experience in both the design and construction of oil and gas facilities. Forward thinking individual with the ability to take on many tasks at one time. Motivated leader focused on building strong professional relationships.

Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering.

Qualify E&I Site Supervisor, QA/QC Inspector, Project Coordinator, Project/Electrical Engineer and as well as Construction Manager. Excellent Documentation Skill for Project Management.

I am a Postgraduate Civil Engineer trained in "PROFESSIONALS IN PROJECT MANAGEMENT( PRIMAVERA 6.1 & MY PRIMAVERA)" FROM CADD CENTRE .I have both Bachelors and Masters Degree in Civil Engineering.My specialization in M.Tech was Construction Technology and management,.

Electrical Installations and Commissioning Engineer in Low/High Power Distributions

Open Pit Slope Design, Tailings Dams, Plant Foundation Investigations, Earthworks

Design, Detailed Engineering, Engineering of DCS-Honeywell EPKS & Yokogawa Cenum CS. valve CV, Flow Element, PRV sizing. Foundation Fieldbus. FATof DCS. INTOOLS, InstruCALC, SPR. P&ID development. HSE member at FLUOR

5 years experience in piping stress analysis using CAESAR II in reputable companies

Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical)

10+ yrs experience in construction field with specialized in RCC structure & refractory material installation.

Completed Amusement and water Parks project in India and Bangladesh. I am Civil Engg. Diploma Holder. It is 3 year course.

Just I have graduated from Sheffield Hallam University in UK on October 2002 and looking for work opportunities throughout USA

I am a recent college graduate who majored in Civil Engineering Technology and is seeking the opportunity to gain experience, as an Entry Level Civil Engineer.

Engineer looking for job in construction industry in Los Angeles area.

The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively.

Experienced Project Manager/Engineer

Diploma in Mining Engg, AMIE Sec A&B in Mining Engg from IEI.

Urban Planner with GIS and AutoCAD skills

-Planning and scheduling using Primavera Project Planeer P3.1 &P6, Microsoft Project Professional / Structural Engineering Design Using Computer Softwares such as STAAD-PRO 2007, ETABS, SAP2000

Passed in diploma in civil engg in 2009 with 84.9%.

Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm

Electrical Technician/Cell Phone Technician

Project Management

Mining engineer and experienced manager with over 20 years of successful executive management, project development, engineering, construction and operations experience in the mining, tunneling, fossil power, rail and heavy construction sectors.

Seeking position as HSE/Training/Emergency Management for Petrochemicals or Refinery Operations

Construction Management professional with Heavy Industry ,Power, Energy, Mining sector experience

Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.

10 years of professional experience in commissioning trouble shooting and servicing heavy-duty diesel engines. Presently working as Senior Service Engineer, responsible for field service of Cummins Diesel Engines. I possess strong academic credentials and good communication skills.

An Entry level position within a growing industry that takes advantage of my electrical engineering education and skills.

A highly motivated, ambitious and systematic individual with exceptional interpersonal skills •Presently doing Masters in Mechanical Engineering with one year of full time experience as Design Engineer working on PRO-E.Proficient in Pro/Engineer 2000, Wildfire, Pro/Mechanica.

Strong structural engineering knowledge, Energitic, Good analitycal thinking, Self motivated, Hardworking, Dedicated person, Able to work under pressure.

LARGE AND STRATEGIC PROJECTS MANAGEMENT - BUSINESS AND OPERATIONS MANAGEMENT

Mechanical Engineer,masters in Engineering Design,CATIA V5,SOLIDWORKS

Qualification: Diploma In Civil Engineering(3Years), Over 11 years experience in Land surveying, the majority of which has been spent gaining experience of Surveying works using modern surveying equipments and Surveying software.

B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out