Resume - Construction Project Controls Manager (PMP Pending)

Misco Jobs

Resume #88346

CONTACT INFORMATION:
View contact information...

Project Controls Manager

It is with great interest that I respond to your advertisement for a Project Controls Manager (PCM). With twenty-five (25) plus years of experience, my knowledge, experience and skills are a perfect match for this position. I would appreciate your careful consideration of my credentials as presented in my attached resume hereto.
Project Manage Experience and Training (PMI PMP Trained - PMP Pending)
Charters and WBS, Project Manage Planning, Scope Management, Cost Management, Schedule Management, Communication Management, Integration Management, Execution Management (Construction), Quality and Quantity Management, Risk (identification, and analysis and threat assessment and mitigation), Schedule Management, Budget Management and Staff Management
Five years experience in the Mid Eastern countries (Speak some Arabic – not fluent)
PCM Training, Knowledge and Experience
Field experience as Project Controls Management
Estimating (Capital Project, Bids, Feasibility, Order of Magnitude and Detail)
Trend Engineering/Change Control Management (Trending)
Contracts, Document Controls, Procurement Controls and Execution Monitor and Control
Earn Value Management (EV, CV, SV, CPI, SPI, BCWP, ACWP, & BCA)
PCM tools and software (Primavera, MS Project, Risk & Monte Carlo Simulation..
Construction Management (Execution Management)
Extensive field experience as Construction Management
Certified QA/QC Inspector
Certified pipe welders and instructor (Low/Hydrogen, Shield Arc, TIG, and Acetylene
Journeyman Pipefitter (four year apprenticeship and training)
Types of Projects: Pipelines, Chemical Plants, Refineries, NGLs, Compressor Stations, Nuclear and Conventional Powerhouses; and Government Projects
Personal Attributes and Traits: Self Starter, confident, diligent, perseverant, creative and innovative in problem solving, always seeks constant Improvement, and vested with people management skills
. I would appreciate your careful consideration of my credentials as presented above and in my attached resume herein. I am very excited about this position and would appreciate the opportunity to meet and discuss my qualifications. Thank you for your consideration, and I look forward to hearing from you soon.

Objective: PROCURE A POSITION AS PROJECT CONTROLS MANAGER
Achievements, Accomplishments and Key Projects
Accomplishments
12 years Project, Construction Management
16 years in Project Controls.
10 years in QA/QC.
25 years in Construction Field Welding (Welding and Instructing)
CREATIVE AND INNOVATIVE PROBLEM SOVING
Trouble shooting: (BG NGL Project with Original Budget $186M - Budget Growth to $400M and was continued to grow) I was call end to evaluate and identified the problems (Management Problems/Project Controls – Failure of Project Controls to properly manage and control project/Forecasting/Contract Deficiency).
Duke Energy (2000) - Developed new Estimating philosophy and Excel Template program, which changed the way Dukes estimated projects. This template program and philosophy save Duke Energy $3M per year and has been in use for nine years. I personal initiated said action on my personal time and without management's prior approval.
Safety (1993): Developed Phillips 66 (Houston Chemical Complex) Phillips Contractor's Safety Audit Sheet. This new audit tool simplified and provided historical tracking of safety items which reduce lost man-hours and promote safety audit proficiency which is still in use today (Saving "Priceless"). I personal initiated said action on my personal time and without management's prior approval.
As Client Site Engineer/Representative promoting a non-adversarial teem environment I was able to institute methods that increased productivity 25% by changing construction methods and practices. Phillips 66 Houston Chemical Complex saved over $5M and Zachary Construction received special recognition for a job well done. I personal initiated said action on my personal time and without management's prior approval.
Developed a computer program changed Texas Eastern's test program as to the way they identified, stored, and retrieved DOT, hydro-static tests historical data, and was expected to save the company $4M per year in overhead operating cost.
As the proven resourceful Senior Project Manager I handled all the "Problematical or endangered" pipeline, desalting projects and other facilities (Saudi Arabia). Some of the problems I deal with included, pipe laying off a thousand foot escarpment, making complex tie-ins in the bay at low tide, pigging activities, QA/QC management, liaison, and project development.
Computer Applications I for QA/QC, and Management
B & R's (KBR) First Quality Computer Tracking Program.
J.E. Merit's Quality Control Computer Tracking program.
Texas Eastern's AFE tracking program (Saving mh's & Main frame Cost).
Hydro-test Cataloging Sys, Texas Eastern (Saving 1,000's of M/H's).713.989.8406

Experience Profile

NOTE: The following narration profiles some of the applicant's diverse abilities,
Experience, knowledge and accomplishments and is not a complete chronicle.
11/08—01/31 BG, Trunkline LNG, Lake Charles, LA.
Project Consultant ("Trouble-shooting" Project Controls & QA/QC Welding)
01/08 –10/08 Spectra Energy, Home Office, Houston, TX
Estimator
Provide Cost for Budget for Pipelines, HDD, Road Crossing, Metering station, and etc
12/06 – 4/07 - Sepam Specialist – PetroRabigh Refinery Exp. Rabigh, KSA.
Project Controls Manager
General Project Controls Management
Client Liaison and Coordinate
06/01 – 12/06 – Bechtel (National Inc. and OG&C)
Senior Cost Control Engineer – Estimator / Trend Engineer
Estimating, Change Management, Historical Reports, Project Postmortem
Monitoring and Reporting
Estimate projects & forecast
Project History & Investigations
02/98 – 02/01. DUKE ENERGY / J & B Technologies Houston, TX
Cost Engineer – Estimator (Non-Official Welding Expert)
Estimate Pipelines, Metering Stations, River Crossing, Road Crossing, & Gas Coolers
Designed a new automated "Electronic Material Cost Data Base"
Designed various "Automated Electronic Estimating Tools
02/95-10/95 & 04/91-09/92 PHILLIPS 66 HCC CORP. ENGR. Pasadena and Sweeny, TX
Project/Construction Management & Quality Assurance – (Petrochemical)
Project Engineer
09/94 -11/94 J. E. MERIT CONSTRUCTORS, INC Houston, Texas
SENIOR INSPECTOR Turn-around Project
07/88 - 04/90 WILLIAM'S BROTHER ENGR. CO. ARCO OIL & GAS COMPANY. Aztec, NM
PIPELINE CHIEF INSPECTOR. Pipeline Gas Gathering Systems & Facilities
TEST ENGINEER. TEXAS EASTERN GAS TRANSMISSION Harrisburg, Pa.
Test Engineer, Coordinate & Conduct Pipeline Hydro-test & Actives
TEXAS EASTERN GAS TRANSMISSION CODES, REG., COMPL. & STANDARDS
PROJECTS CONSTRUCTION ANALYST
01/80 - 3/85 C. E. LUMMUS CREST. Saudi Arabia
PROJECT MANAGEMENT TEAM / PROJECT/CONSTRUCTION MANAGER
Project and Construction Management (Project Controls Manager)
Client Liaison and Coordinate Pipeline Construction Actives with other Departments
Contraction Adm., Engineering, Q.A, Technical advisor and Writer Change Orders
Contractor's Bid Evaluation, Estimating Change Orders & Negotiations
Respond to contractor's "Request of Information" (RFI) & Address Design Changes

Education
CONSULTING SOLUTIONS.NET (PMI PMP Certification) San Antonio, TX
BECHTEL UNIVERSITY (Management, Safety, Cost Control Engineering, Estimating,
SAP, Government Client Compliance, & much more…)
SAN JACINTO COLLEGE - (Engineering) Houston, TX
NRI SCHOOL OF PARALEGAL - (contracts) Washington, DC
NEW MEXICO STATE UNIVERSITY - (General Education) Farmington, NM
HOUSTON COMM. COLLEGE - (Engineering & CAD) Houston, TX
INDIAN RIVER COMMUNITY COLLEGE (Metallurgy) – Steward, Fla.
PARKS SCHOOL OF BUSINESS (Business & Accounting) – Denver, CO
NATIONAL PIPELINE WELDING SCHOOL - (Welding, Testing & Pipelines) Tulsa, OK

References:

John Frost Spectra Energy 713 627 5400 Previous Manager
Jerry Allen On Shore/OffShore Insp. 713 254 5071 Company Rep.
Greg Thompson Bechtel 713 235 4249 Lead Senior Cost Engineer
Harvey Wagner BG (British Gas) 713 599 4063 Lead Project Engineer

Types of projects:

Pipeline (8" to 48") – War Emergency Pipeline 1990) (, Trans-Alaska Pipeline (1976), Trans-Island Pipeline (2004) & more...
NLG – Sabine Pass (2003), BG/Trunkline (2008) and more…
Nuclear Power House – Shipping Port (1983), St Lucie (1993), Palo Verde (1986), Seneca (1985)
Conventional Power House
Chemical Plants
Refineries
Desalination
Paper Mills
Tank Farms
Fire Protection
Turn-arounds

Computers
Microsoft Software, Primavera, BecRac, & Success

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 3087)

Go to Search Parameters...

Brief Description

A graduate in biomedical engineering with over 5 years of experience in Medical equipment planning, procurement, design assisstance, primary level maintenance in Health Care/Hospitals and developing Management Information System of Biomedical Department

Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

I have eight years experience in major civil works projects such as,bridges and metro rail projects.

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

Construction Project Controls Manager (PMP Pending)

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

E&I Superintendent with a broad spectrum experience of electrical, instrument, and mechanical engineering acquired throughout a thirty year career. 27 years of my experience represents working directly for the Client within the O&G industry, on multi-discipline task force projects, including PMT.

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

International Project, Construction, and Contract Management

Diploma in Quantity Surveyor

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

SDS2, Xsteel, AutoCAD Steel Detailer.

ITI in Draughtship

Create learning opportunity to work in architectural firm and deal with many graphic jobs.

Project Engineer (Instrumentation & Control)

System Administrator, Server Support, Network Administrator, Desktop Support, ADS, DHCP, CCNA, MCSE

Construction Electrical and Instrumentation Engineer

Qa/Qc Inspector

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

I am a highways designer, designed more than 50 link roads, 2000 kms length all over Egypt, Yemen repuplic, & KSA.Using thelatest versions of Autodesk, Also I have a good expeience in the field of design Water & Waste Water networks

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I describe myself as Sincere and perseverance to Hard work. I had completed my Bachelor of Civil Engineering in First Class From a reputed institution in Tamil Nadu, India.

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

Geotechnical Engineer

I have recently finished my undergraduate study in Mechanical Engineering, Institute Technology of Bandung, Indonesia. I am looking forward to having a career which has strong relation with my educational background.

Working in the Kingdom of Saudi Arabia for the last 9 1/2 years. Well experienced in the design and execution of all types of HVAC systems, plumbing systems including water supply, Sewage/drainage system and Fire fighting system.

Results-oriented, Construction site Engineer with 7 years of experience in all facets of the Industry. Verifiable track record for successful completion of many projects.

ASNT Level III, AWS SCWI, API 510, 570

Over thirty years of combined engineering and construction management experience involving supervision, design, contracting and construction, pre-award and post-award contract administration, change order and claim management, CPM Pert scheduling, cost, estimating, procurement and logistics of large

Multilingual GIS (Geogpaphic Informational Systems) professional, cartographer

Welding Engineering

M.Tech Transportation Engineer with 2+ years of experience

Safety Professional, 30 years experience construction, minin, environmental and hazmat

Master in Machine Design engg with 6+ Yrs of Exp in design,Developement & Reverse engg of machine elements and Design Support for Onsite clients.

I am an Indian Mechanical Graduate Engineer with more than six years Multi-dimensional Experience in oil & gas related projects in India & abroad.

I am a highly motivated person who is incredibly conscientious and hard working with an incredible ability to get the job done in adverse conditions and time restraints. The majority of my experience has been working on all types of heavy earthmoving equipment in a vastly changing mining environment

4 year Bachelor of Engineering Graduate Instrumentation Enginee,Automation Software Development for Three level Control System and Modeling the process for the purpose of control system design.

Over three years of experience as an Electrical Engineer with a broad understanding of operations and practices for petrochemical, commercial, and industrial projects, all involving engineering and design of electrical systems. Knowledgeable in AutoCAD and Microstation.

I mastered AutoCAD and installation of pipes for the fire and the fire system. And I was able to work under pressure of time.

Free! As a thorough and outgoing leader known for getting the job done, I am committed to the highest performance and standards. I draw out the best in others, bringing quick resolution to challenging situations. I take good care of my teams, treating them with respect and training them for success.

Structural Designer / Draftsman

I am a Civil/Structural Engineer who has recently been laid off from Fluor Daniel and is seeking new employment. I have with overtime considered at each job, four years of diverse experience as a Structural Engineer

I am M.Tech Welding Engineering graduate with one year of experience in manufacturing industry.Myself specialized with WPS,PQR preparation and i am having ASNT level II certifcate in Ultrasonic Testing.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out