Resume - Experienced & Seasoned Engineer

Misco Jobs

Resume #88390

CONTACT INFORMATION:
View contact information...

PROFILE

Seasoned engineer with supplier development, project management, manufacturing, and design & development experience.

United States citizen & Canadian permanent resident.

PROFESSIONAL EXPERIENCE

BALLARD POWER SYSTEMS, Burnaby, BC 2007 – 2009
Supplier Development Engineer (2008 – 2009)
* Ensured that suppliers met technical, capability and quality requirements through the Pre-Production Approval Process (PPAP) and were in line with product cost targets.
* Researched and evaluated potential suppliers with respect to ability to execute against Ballard's long-term strategic plan.
* Assessed product feasibility and quality for the automotive fuel cell stack (MK1100), Bus program (HD6) and Back-Up Power programs (1020 ACS & 1300).

Manufacturing Engineer (2007 – 2008)
* Developed hydrogen fuel cell assembly processes for the MK1100 program. Past process had no flow and had a lot of waste in the system. The MK1100 fuel cell is the lead automotive program for Ford Motor Company and Daimler Corporation.
* Drove variability out of the finished stack assembly by implementing process changes and/or recommending product design changes.
* Investigated root causes behind any out-of-specification conditions and implemented corrective actions.

FORD MOTOR COMPANY, Dearborn, MI, USA 2001 – 2007
Manufacturing Engineer, Vehicle Operations
* Acted as Systems Engineer for Body Shop sheet metal on the 2008 Ford Taurus / Ford Taurus X / Mercury Sable at the Chicago Assembly Plant. Worked with Ford Stamping, Ford vendors and Ford body launch teams to ensure a quality product. Ensured that all "A" surface sheet metal was free from dents, dings and that specified margin and flushness requirements were met.
* Launched the Ford Focus (3dr/4dr/5dr/Wagon) underbody tooling at Wayne Assembly Plant for the 2006 Consolidation program. Reduced total cost by approx $1.5 million USD by eliminating non-essential program content. Increased line rate in the rear ladder line from 62 net to approx 70 net jobs per hour (JPH).
* Launched the Lincoln LS closure manufacturing and closure install tooling at Wixom Assembly Plant for the 2003 refreshening program. Ensured that all "A" surface sheet metal standards were met and eliminated overhead cost by 2 heads per shift.
* Provided simultaneous engineering, manufacturing direction, and assembly feasibility to ensure product / process compatibility from the early stages of development through the launch process. Delivered capable processes and tools for body shop operations.
* Assisted in establishing and delivering program investment, variable cost, and weight, quality and capacity targets.
* Took a leadership role in resolving assembly related concerns for respective area of responsibility.
* Supported variability reduction and lean manufacturing initiatives and incorporated global manufacturing strategies and best common assembly practices.
* Managed the design, development, installation and launch of body assembly tooling. Worked as a team with Ford manufacturing & design engineers, Ford assembly plant and tool vendor personal to make each program a successful launch.

TELEFLEX AUTOMOTIVE, Troy, MI, USA 2000 - 2001
Applications Engineer
* Led the design and development of the Accelerator & Cruise Control systems for Ford Motor Company.
* Managed all Ranger, Explorer, and F-53 Stripped Chassis programs.
* Met with Ford engineers on a daily basis to discuss and resolve new, current or past program issues.
* Reported issue status and resolution to Ford and Teleflex engineering, purchasing, and manufacturing operations.

YAZAKI NORTH AMERICA, Canton, MI, USA 1996 - 2000
Mechanical Design Engineer
* Led the design and development of Instrument Clusters for the Toyota and Mitsubishi North American markets.
* Worked with OEM customers, Yazaki Corporation-Japan office, North American suppliers and Yazaki manufacturing team during product development.
* Traveled to Yazaki's Mexican manufacturing operations to ensure a quality launch of each product that I was involved in.

CARRON & COMPANY, Contracted to Ford Motor Company, Dearborn, MI, USA 1995 - 1996
Design Aid Coordinator
* Chaired and coordinated the 1999 Expedition/Navigator Design Aid meetings.
* Coordinated installation of latest level prototype parts on design aid bucks for packaging analysis.
* Reported complex problems with underhood packaging to Design Engineers.

Weight Analyst
* Analyzed total weight of 1999 light truck subsystems to ensure that US government emission standards were met.
* Tracked and recorded weights of steering, suspension, wheels/tires, and interior components.

GENERAL MOTORS CORPORATION Pontiac, MI, USA Summer 1994
Engineering Intern
* Worked with Product and Container Engineers to develop sheet metal racks.
* Developed and delivered quote packages for sheet metal container assemblies to vendors.
* Traveled to various plants and suppliers to inspect and analyze body part containers.
* Followed up with suppliers on body panel rack tooling.

EDUCATION & PROFESSIONAL DEVELOPMENT

Bachelor of Science – Industrial Engineering Technology 1995
Central Michigan University, Mt Pleasant, MI, USA

Six Sigma Greenbelt / Process Control Methods / Failure Mode and Effects Analysis (FMEA) / Systems Engineering Fundamentals / Global 8D / Experimental Design /
Manufacturing Reliability / Applied Consumer Focus / CM4D / GD&T

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 3118)

Go to Search Parameters...

Brief Description

Qualifications: B.E (Mechanical). Graduated with second class, first division honors. Have an MEP consulting background with over 2 years experience. Advanced in: AutoCAD, Solid Works, Excel, Visual Basic programming, Word, TRACE heatload and Matlab programming.

Electrical engineering major in power .

As Geosciences Engineer, 13 years of experience. Exploration and Production mines

Electronics and communication Engineer

GSM/CDMA Project Manager

Installation and commissioning, project management

Experienced & Seasoned Engineer

Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.

Total 13 years experience in Contract Administration, Quantity Survey, and Procurement functions of offshore oil and gas projects, onshore petrochemical and fertilizer projects representing both Consultant and Contractor.

I am a target oriented person with vast experience in Oil and Gas Construction Projects, I have experience in the safe Erection, Dismantling and Modifications of all Scaffolds in accordance with BS 5973 Standards, Inspection of scaffold materials and fall protection systems, documentation of scaffol

Contracts Manager

Civil Engineer with Project Control experience and knowledge of Primavera (P3)

A chemist with technical skills trainings in Industrial Process Controls, Advanced PLC, Hydaulic Industrial Controls, PLC, Electro-Pneumatics, Calibration for Process Instrumentation, Advanced Industrial Motor Controls, Pneumatic Industrial Controls & Industrial Electrician

Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic

Project maintenance manager/planner/trainer

9 years of extensive experience in Project Management, Planning and Execution involving fabrication, erection & commissioning of Piping & Equipments in Nuclear Facilities, Petrochemicals, Aluminum Smelter and Gold Mine Projects.

Project Manager, Telecommunication, Civil Engineer, Project Coordinator, Project Engineer, Supervisor

Seasoned Project Management professional with significant field experience in Civil construction projects including Quantity Surveying. Background includes successful execution of bridge & industrial building project. Solid leadership, teamwork and project management capabilities.

B.Tech-Mechanical Engineering, CSWIP-3.2 Senior Welding Inspector and LEAD Auditor-ISO 9000 having a 16 years experince in various levels in EPC projects ion Oil.GAS, Petrochemicals,Refinery and Pipeline in India, UAE,Nigeria, Saudi Arabia and Qatar.

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

AutoCAD, AutoDesk, CATIA V5, Pro E, SolidWorks, MatLab, MathCAD, Maple, MDesign, Ricardo Wave, GT Suite, Fluent, BasicStamp, C++, C+, PSpice, and basic Java programming „« Windows operating systems, Microsoft Office

Technically astute and versatile subsea project engineer with experience in FEED, detailed design, fabrication, installation, regulatory and pre-commissioning of subsea assets

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

Speak, write and read French, English and Arabic. Abilities to acquire new knowledge and skills quickly

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

I am working as an instrument technician in KSA through Al-Hugayet contracting Est. since January 2000. My job includes Installation, commissioning and Maintaining Process Control Instrumentation, associated with Oil, Petrochemical, Polymer, Packaging Lines with 10 years Experience.

Diploma in Mechanical Engineering

I am graduate and have a diploma of instrumention and process control with 9 years exp in diffrent industries

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

College graduate/entry level electrical engineer

Instrumentation, Automation, control & electrical engineer with 3 years experience

1991-2002 : Diploma in Building Services Engineering Place : Shah Alam Polytechnic CGPA : 2.85 out of 4.00 1997-1998 : SPM Place : Sekolah Menengah Teknik, Kuala Terengganu Grade : Grade 2, 31 Aggregate

Hull / fields/site engr. structural detailer have an experience in shipyard industries.

After having the highest level of exposure in Project Planning for the past Eight years in one of the fastest growing companies in Dubai. I am looking for a challenging and creative position that will set new standards in Project Planning. And to obtain a challenging position.

BE in Electrical and Electronic Engineer. Training in PSS/E Software. Able to perform Load flow analysis using PSS/E software and intepreat result.

Having 4 year exp. in automotive sector.

IT PROJECT MANAGEMENT

Well versed with ISO-9001:2000, ISO/TS-16949:2002 QMS, MS-OFFICE

Total 11 years of experience for Instrumentation and control related design and detail engineering activities for Petrochemical refineries, Ammonia Fertilizers, Cross country Pipelines, Offshore and onshore gas processing facilities and power projects.

Set-up, operate & maintain Document Control Area required for distribution, storage, retrieval & management of Vendor documents & dwgs, Proj. documents/drwgs; Electronic Document Management Systems Design, Operation & Maintenance; Supervision of Doc. Control Group & Precedures devt./implementation.

Graduate + Diploma in Materials Management, 12 Years exp., working as Purchaser in a Global Leading EPC Company in Qatar

After completing my Degree in Mechanical Engineering, I have worked in Diagnostician company providing NDT services on pipelines across Russia. Later I joined GAZPROM’s Subsidiary “Stroytransgaz” in Syria where 36”x319km Gas Pipeline Construction Project gave me a solid background in many QC aspects

GIS Expert (Esri & Geomedia)

Recent graduate with a Bachelors Degree in Mechanical Engineering looking for entry level position

I have a bacheors in engineering sciences, this is a relatively new discipline , which is essentially electronic engineering with a specialization in solid state physics and instrumentation

To obtain a full time job position in Mechanical Engineering ( Product Design engineering, Sales eng, HVAC, Analyst eng and Consulting)

Registered Architect (License No. 19900) since February 2005 issued by Professional Regulation Commission (PRC) of the Republic of the Philippines. Proficient in AutoCAD Program & MicroStation software. Familiar in using Autoplant 3D Structural, Microstation Geopak & 3D Studio Max.

Ingénieur en CVAC/ Mécanique du bâtiment et énergie

Control & Instrumentation Engineer with 5 years experience in erection, commissioning and maintenance of control systems and field instruments.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out