Resume - FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft...

Misco Jobs

Resume #88607

CONTACT INFORMATION:
View contact information...

EDUCATION
Bachelor of Science in Electrical Engineering May 2005
Boston University College of Engineering, Boston, MA

French Baccalaureat June 2001
Lycee Francais de New York, New York, NY

Coursework:
Introduction to Photonics Microprocessors Engineering Economy
Communications Systems Control Systems Electromagnetics
Digital Signal Processing Computer Science II

Skills: FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft Office, HTML, Matlab, AUTOCAD
Bilingual (English/French)

Projects:
* Successfully completed project on an automated vehicle using AUTOCAD to come up with a design that later was implemented using legos.
* Senior Design Project - Automated Vehicle Navigation using GPS, RF communications, sensors microprocessor: Created an improved system in order to perform direct searches (go to start point and conduct faster scan over defined area). This project involved developing a navigation system that maintained a desired trajectory for the acoustic scanning.

WORK EXPERIENCE:

LensCrafters Inc, New York, NY
Eyewear Consultant September 2009 – Present
- Filling ophthalmic eyeglass prescriptions and fitting and adapting lenses and frames
- Assisting on site Doctor in servicing patients for eye exams through pre-testing
- Educating customers on corrective eyewear, sun protection, lens coating and assisting them in the selection of frames appropriate for their prescription

Independent green energy project, Brooklyn, NY
Electrical Engineer April 2008 – Present
- Currently developing and modifying, along with 2 other business owners, retail and consumer ready devices for a green energy project that will include the installation of solar panels, wind and other small electrical power generating products. Also seeking NYSERDA PV installer certification.

Consolidated Edison Company of New York, New York, NY
Junior Designer May 2007 – March 2008
- Planning, designing, drawing, and estimating layout work for the addition of new facilities to the gas & electric distribution system, the provision of service to new customers, and for maintenance of maps and records
- Evaluating the distribution system capacity and providing for load growth
- Coordinating public improvement, system reinforcement, or new service work to meet service dates
- Preparing formal work justification for projected capital expenditures

Cintas Corporation, Brewster, NY
Service Sales Representative Nov. 2005 – May 2007
- Developing new business to business uniform accounts
- Providing customers with an adequate uniform rental service
- Supplying unique products and superior customer service.
- Account & Route management

Boston University Office of Housing, Boston, MA
Administrative Assistant Sept. 2004 – May 2005
- Helping students with any dormitory issues.
- Supervising students in Fitness facilities

ACTIVITIES/INTERESTS:
- International business & International politics
- Internet Radio
- Energy efficiency (EPA, NYSERDA, in the process of obtaining PV Installation certification)
- Assistant Coach at KIPP AMP Charter School
- Captain of basketball team in Urban Professional League

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2751 to 2800 of 3118)

Go to Search Parameters...

Brief Description

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

I am Construction Supervisor Who Worked under Dam, Channel, Roads, Mining many counties of the world - Around 17 years. My Area was Filling, Excavation Site Arrangements, People Controlling, Training etc.

To secure a position a Purchasing /Buyer In your company.

DRILLING FLUID ENGINEERING ( MUD ANALYSIS), SURVIVAL AT SEA AND HELICOPTER UNDERWATER ESCAPE TRAINING, M S SUITE

FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft Office, HTML, Matlab, AUTOCAD,

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

B.Tech Engineer having 2+ years of experience presently working as a planning engineer with Reliance ,Jamnagar for JERP project. Can handle softwares required for job accomplishment.

Geotechnical, Geological Exploration, Resevoir geologist

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

QAQC Inspector. I have Experience on both LNG Termals and Oil Refineries

Im instrument Engineer ,experianced in controlling physical parameters(temp, press,flow) using microcontrollers,control aspects, designing new control systems,installation and maintainence

I have Masters Degree in Geology with experience in Coal Exploration.

CSWIP 3.1, ASNT level II in RT, UT, MT and PT, ISO 9000:2000 Lead Auditor

Construction Manager, Side Manager, Supervisor, Hydraulics Engenieer

I am an engineering graduate and i've been working as a material controller in a reputable company in qatar for two years. i am looking forward for a career growth and gain more experience. I am willing to accept any jobs which i am qualified of and my experience is necessary.

Organizational Development •Procurement & Purchasing Systems & Hardware • Operations Management •Business Development • System Analysis • MIS Administration • Inventory System Control • Team Management • Regional ICT Management • Regional MIS Management • Regional Database Management

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Project Control (Cost & Planning) with +5 years of exp

Worked in oil and gas industries for over 6 years as Planning Engineer and Project Engineer. Advance in using Primavera Project Planner Ver. 3.1. Language skills including English, Chinese, Malay and Chinese dialects. Worked in China for the last 3 years. B. Eng. from Melbourne University.

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Survey Technician/Mapper/Drafter

Draughtsman - Piping / Architectural / Civil. with extensive number of years experience

Supervise the execution of new 115/69/13.8kV projects (substations) from conception to completion.Design and development of all aspects of electrical system/facilities, substations and distribution

Seeking a position in Quality Control/Assurance Management where my extensive background, abilities and expertise will be used efficiently.

Instrument Technician with Overseas Russian Experience.

Demonstrated planner with diverse experience and knowledge in Airport project, Gas and Oil Projects and general MEP projects. Strong Engineering and Management background combined with certification in project management courses. Adept at learning new concepts quickly, works well under pressure

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Environmental Consultant (Engineer/Scientist)/Geoscientist

I am a Survey Engineer, experienced in multi disciplinary projects, with a good track record of world class projects. I am highly interested in any position with international or overseas exposures and possibility to maximize skills in Surveying, Management, acquire new ones and progress.

More than 8 Years experience in piping & Steel Structural pre-erection, post-construction engineering activities, and Oil Drilling Services on Land and Offshore Rigs; Worked in Middle East, Central Asia and India under international and well-known construction companies like Schlumberger Drillin

I am a professionally qualified Process Engineer with experience of process and product development, as well as quality control at Energy and Telecommunication Industries. I am accomplished to multinational environment, related to process modeling, project leadership, quality control and auditing.

PGDMS from London.A+ honours in hardware engineering. C, C++. Working knowledge of microcontroller programming and hardware languages.

33 Year old Dutch national with 10 years of HDD project management in Asia, Europe and FSU, now living in China.

Chemical Engineering, Control System engineer. Pipeline operation. Catalyst

pdms 3d cad autocad cadworx sr designer mechanical drafter field engineer walkdown

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

My objective is to secure a challenging position in the natural gas, oil or petroleum pipeline industries as an operations and maintenance supervisor or as an inspector. I have over 25 years of progressive experience in the natural gas transmission and distribution pipeline industry.

Civil engineer, project management, site management, cost estimation, Russian, English, Turkmen speaker, CIS experience, Siberia, Russia, Turkmenistan, Kazakhistan

Familiar in Auto cad (2D&3D), Microstation & Ms Office. Strong practical knowledge of Electrical. Good team player with supervisory skill

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

Livelink Administrator, Causeway Collboration Administrator

I completed my Bachelor of Science in Agricultural Economics and Agribusiness in the year 2001 and have completed the MBA programme majored in International Business in August 2008.

Surveyor and navigator (I love trouble shooting)

Good in warehouse/steel company settings. Good use of math and industrial tools. Can be self starter.

Catia, Solid Works, Solid Edge, Pro/ENGINEER, Adobe, Microsoft Office ( PowerPoint, Access, Project ), Photoshop, Blue Prints, Design, Product Development, Plant Layout Strategy, Six Sigma, Lean Manufacturing, 5S, , Injection Mold Press, Class A/CDL license, Lathe, Forklift, Donkey-lift, Milling

Instrumentation Technician and Mechanical Engineering Technician. Strengths in DCS, PLC's vibration monitoring equipment and thermography

First Prev 51 52 53 54 55 [ 56 ] 57 58 59 60 61 62 63 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out