Resume - can survey construction, road, site development, building, pipeline, airways and...

Misco Jobs

Resume #9382

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Associate in Geodetic Engineering Graduate
Licensed Jr. Geodetic Engineer
Certificate on Autocad Rel.14 w/ color rendering, Microstation, Microsoft Project
------------

OBJECTIVE:
------------
to work with a high quality performance and to developed more my skills in computer.
------------

WORK EXPERIENCE:
------------

Experience:
Gama Industry Arabia Ltd.
P.O Box 2122, Jubail 31951, KSA
April 14, 2004 - Present
Position: Survey Engineer
-Lay- out of Stacker and Reclaimer (foundation, pedestal and rails
-Lay-out of trenches and taking elevation (drainage, cable, pipe etc.)
-Lay-out and taking elevation of the lean concrete, column, beam, pedestal, anchor volts, flat forms, steel bars and formworks of the Bleending /Homogenized Silo, Clinker Silo, Cement Silo, Pre-heater, Kiln Dryer, Cooler, Raw Mill and Clinker Transport
-Supervising the excavation and backfill (Silo, Clinker, Trenches etc) and responsible also in painting Nitoproof 10( Bitumen Emulsion Protective Coating)

Daewoo Eng"ng & Const. Co., Ltd
Wafa, Libya
Feb. 06, 2003 - Mar. 02 2004
Position: Survey Engineer
-Lay- out of airstrip(center line, left and right offset, drain, shoulder)
-Lay-out of pipeline and taking the bottom of elevation of pipe
-Lay-out of manhole and trenches (drainage, electrical etc.) at process area

Villamater Surveying Office
Batangas City, Philippines
Feb. 01, 2002-Dec 31, 2002
Position: AutoCad Operator /Jr. Geodetic Engineer
-Responsible in the identification of lots, topographic survey, mapping of right of way and route survey of transmission line.
-responsible in the plotting into cad drawings and computation of field results.

A. Rajab & A. Silsilah Co.
P.O. Box 2815 Riyadh 11461, KSA
July 18, 1999–Jan. 20, 2002
Position: Surveyor/AutoCAD Operator
-Responsible in the horizontal and vertical survey of the route scheme of mainline, branch line and low tension line of the 33 kv Distribution Proj.
-Responsible also in the modification and relocating the High Tension and Low Tension Lines.
-Plotting of plans such Profile Plan, Route Plan, Lt Plan, different Structures (single pole structure, Auto-recloser Mounting Arrangement, 33 Kv indoor Transformer Arrangement etc..) and Single Line Diagram into Cad drawings

A.D. Antonio Surveying & Consultancy Inc.
Shaw Blvd., Mandaluyong City, Phil.
July 28, 1994–May 31, 1999
Position: Surveyor(Instrument man )
-Responsible in the establishment of horizontal and vertical controls
-Staking the upper, deflection/bend and lower station of the funicular system
-Responsible also in the supervision of the topographic survey of a golf course with an area approximately 1500 hectares with seven (7) teams assigned.
-Lay-out of the fairways, tees, greens, car path, roads and parking lots as per design.
-Monitoring the roads grades and elevation of earthworks
-Computation the volume of earthworks
-Executing profile along the center line of the Transmission Line Project
-Topographic survey and staking of tower locations
-Survey of access roads utilized in the construction of towers
-Actual shots of transmission towers as built
-Staking of the tower location points.
-Route Survey of roads

------------

EDUCATION & CERTIFICATION:
------------
Education:
-Associate in Geodetic Engineering
-Passed the Board Exam given by the Professional Regulatory Commission on Feb. 1 and 2, 1996 in Manila, Phil. with an average of 77.35%

Training:
-Autocad Rel.14 with Color Rendering
-Microstation
-Microsoft Project '98
------------

ADDITIONAL INFORMATION:
------------
SURVEYING INSTRUMENT PREVIOUSLY OPERATED:
1)C- 100 series-DTM 751 series-DTM 851 series ( Nikon surveying inst. )
2)GTS 200 series – GTS 700 series ( Topcon surveying inst. )
3)Laser (Criterion Laser Tech. Inst.)
4)EDM & Teodolite ( Sokissha & Sokia )
5)Leveling instrument (Nikon & Topcon )
6)TP 1000 series(Laica Instrument)

DATA RECORDERS:
-HP 45 ( Hewlett Packard )
-HP 200 LX ( Hewlett Packard )
- Others are built in data recorder

KNOWLEDGE IN COMPUTER WINDOWS:
1)Windows 95, 98, 2000
2)Autocad Rel. 14 and Autocad 2000
3)MS Project '98
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 2819)

Go to Search Parameters...

Brief Description

Operating System: Windows 95, 98, XP & 2000, Computer Literate with Knowledge of MS-Office 2000, Knowledge of AutoCAD Rel. 14, 2000, 2002 & 2007

Fourteen years of experience in cost control, estimating, planning & scheduling, financial analysis, procurement, commercial negotiation and contract administration. Five years of experience in management positions.

Tasks-oriented, analytical professional civil engineer with MBA. Well diversified background in civil & structural engineering consultancy, property development and construction with solid experience in ISO9001 QMS.

Results oriented International Project Manager (IPM) with extensive development experience and strong concentrations in the Telecommunication (s/w and h/w development), Electronic, Automotive and Construction Industries.

I am a planning engineer, having good working experience in primavera 3.1 and microsoft project. I am a civil engineering graduate and took post graduate diploma in Advanced Construction Management from NICMAR, Pune

Civil Engineering graduate with 5 + years experience in sales of specific products like Geo-Synthetics and Gabions

I have a Diploma in Mechanical and 12 Yrs Experience in QC related jobs like Oil, Gas, Power, Refinery Constructions. In addition to I have ASNT RT,UT,MT,PT Level-11 and CSWIP 3.1 Welidng Inspector certificate from TWI UK.

Civil Engineer

HSE professional,Hands on 10yrs experience in process and construction projects

Design of Horizontal, Vertical Road alignments, at grade intersections, at grade separators and highway components as per site conditions in line with the IRC, ASHOO,BIS and international standards, using MOSS (MX Road) & Auto cad Software’s.

Civil Engineer experienced in buildings, Roads and Power projects.

BS Mechanical Engineer with 7 years experience, familiar with ASME, API, ANSI, TEMA, etc. specifications and industry standards in mining, petro-chem and power plants. Strong background in Piping. Single, willing to relocate, fluent in Spanish & understand Bahasa Indonesian.

1- ) Possessing the knowledge of both Construction & Maintenance Planning.2-)Cost Estimation , Analyzing & Controlling ( Cost Tracking , Cost Variance – CV , Cost reports ) ( using different tabular & Graphical forms ) 3-) Resource Planning & Schedulling using Software aid like Prima Vera & M.S.P

Continue acting in pipeline engineering construction and assembly independent of the site job and challenging new experiences.

I have gained knowledge in the areas of construction and project management.I have had considerable experience with the use of spreadsheets and word processing programs.I am a motivated learner and I can work well in in a team.I consider my communication skills,both written and oral of high quality

Plc, scada & dcs programmer.

Planning, Primavera, scheduling

Performed as Professional within the Industrial Engineering area, with 24 years of experience in the Oil Industry. Specialized in guarantees and security of product specifications according to sales commitments supported by a certified quality system structured on the basis of present requirements.

Six years of technical experience including operation and maintenance of Satellite/RF communication equipment along with various test equipment.

Diploma In Instrumentation Engineering In Aug 1988 (3 Years Duration) +Amie Eqvt To B.E

DCS Engineer With Yokogawa CS3000 experience

An effective engineer possessing good communication skills, combined with proven technical and organizational abilities. Education, qualifications and experience gained through significant design applications and management positions performed in the US and the Middle East.

Project Leadership: project development, estimation, engineering, installation, field start-up and commissioning.

Mechanical engineer striving for excellence and challenges

Obtained Greenbelt Certification from DaimlerChrysler and Black Belt Steering Committee for solving a complex rear door window noise issue on Dodge Durango by using Shainin methodology.

Highly organized, self-motivated individual with experience in the Automotive Electronic Equipments maintenance, repair and troubleshooting, Computer and Data/Voice Communication industry.

Civil Engineer for Construction/Excution, Billing, Analysis of Rate, Quantity Survey

Creative and reliable engineering Personal with a strong technical backgrounds including data handling, maintenance and servicing of equipment and machines.

Seeking Construction employment opportunities.

can survey construction, road, site development, building, pipeline, airways and can established control.

5 years+ of experience as a Facilities and Administration personnel. Manages On Guard security software (Security). Manages Documents for Access levels (Security)

B. Sc. in Civil Engineering & MBA in Riyadh, Saudi Arabia

Experience in software is the leading developer of computer-assisted thinking programs for businesses in the field of project planning, problem solving, and negotiating.

Multi skilled Automotive Mechanic, 24yrs experience with the military often in extreme conditions, work well in a team or individual, some management experience but mainly hands on, good problem solving skills, currently working in Saudi Arabia, contract exp 17th June, i have a migrant visa already

TRAINEE ENGINEER

i have done diploma in metallurgy and working as a quality inspecter in power plant

Certificate in Project Management Course from IIT Delhi B.E (Mechanical) 2000, Diploma: D.M.E. 1997, Mumbai BoardPrimavera, CEASARII (Ver. 4.4)

BE electrical, Micro Station, AutoCAD and MS Office

QA/QC ENGINEER CIVIL

Design and construction supervision of large central HVAC system of comercial,institutional and offfice buildings.Also have experience in Design Management

I have over 16 years of progressive experience encompassing civil engineering and project construction management responsibilities of multi-discipline architectural and engineering projects, value-engineering review, field construction management, project scheduling and contract administration.

I¡¦m holding a Master degree in Industrial Engineering & Management from Europe. I¡¦m currently working at the Consolidated Contractors International Company (CCIC), in Abu Dhabi, as a ¡§Senior Mechanical Engineer¡¨. I have 7 years of work experience in the fields of refinery construction

Combined experience in Refrigeration and Electrician Technician in the Pharmaceutical Industry, Petrochemistry and Building Management System (BMS).

Job Title : Service, Erection and Maintenance Engineer - Maintenance & Trouble shooting skills - Installation, Repair, commissioning and STart Up of Boilers. Stron Communication Skills. Training Courses

I have a Masters degree in Civil Engineering. I am seeking a job in the industry to apply skills obtained throughout my training and thereby improve my own abilities and achieve better understanding of the diverse field of Civil Engineering.

Application of specialized softwares for engineering design with opportunities in project leadership

Looks forward to a challenging career as a Engineer in Oil, Gas, Petrochemical, Fertilizer, Power, Nuclear and Chemical related heavy process equipments fabrication, machining and Construction industries. In depth knowledge in Construction industries and process industries.

Civil engineer who is familiar with all aspects of concrete and steel structures, design and analysis , high rise building , finite-elements method and last software packages in structural analysis. Executive sector of the great projects for water distribution and its related pumping stations

Career Objective I am looking forward to develop my academic background and career related experience in Construction field.

Ingegnere Meccanico, laureato a Pisa con Master of Science in Metallurgical and Materials Engineering dalla Colorado School of Mines, Golden, CO USA. Italiano come madre lingua, ottimo Inglese, Francese, Tedesco e Spagnolo colloquial

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out