Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #9588 next resume »»
CONTACT INFORMATION:
View contact information...

Date of birth: 01.07.1964

Nationality: Indian

Professional Qualification: Bachelor's Degree in "Civil Engineering"

University /Year of passing: Bangalore / 1987 January

Driving Licence: U.A.E.Driving Licence

Computer Knowledge: MS Word,MS Excel, MS Project
-----
Summary of Experience: I'm a graduate Civil Engineer with nearly 18 years experience in the Construction of Sewerage, Drainage, Sewage treatment plant, 880 MW, 800 MW Power stations, Major Pumping stations of Sewerage/Drainage/Portable water/ Seawater, Heavy industrial structures, Piling, Desalination Plant, High quality RCC Structures and Roads.

I am nearly 16 ½ years in the Gulf out of which 13 years with Multi national Consultants and 3½ years with an international Contractor.
--- Career Summary
2002 October-Continuing: "Montgomery Watson Consultants" Abudhabi,UAE

2000 January -2002 October: " Fichtner Consultants " Dubai,UAE

1995 September-2000 January: "K.Home Consultants Ltd" Dubai,UAE
(Flour Daniel Group)

1992 May - 1995 September: "Montgomery Watson Consultants"
Dubai branch - 1994 March to 1995 September
Bahrain branch - 1992 May to 1993 November

1988 October - 1991 November: "A.A.NASS Contracting Co" Bahrain.

1987 January - 1988 October: "Roopa-rekha-Consultants",India
Detailed Professional Experience
I. 2002 October-Continuing: "Montgomery Watson Consultants" Abudhabi,UAE
Position Held: "Resident Engineer"

Project No 1: cost UAE dhs 35 millions,Abudhabi Sewage Projects Committee, contract no 1142/2, Includes construction of 4 No Pumping stations, 85 no Manholes, Hundreds of Road gullies, Hundreds of Inspection Chambers, Laying of pipes of dia 150 mm to 1200 mm. Pipes used are pvc/AC/GRP/slotted pvc…etc.

Project No 2: cost UAE Dhs 115 Millions,Abudhabi Water & Electricity Authority, Contract No.G1077. Contract includes construction of Major portable water reservoirs of capacity 7.5 million gallons each and construction of major pumping station and all associated pipe lines, associated structures, control building. etc

Nature of Duties on above projects are Contract Administration, Construction supervision by leading a site engineers team, Drawing Review, Shop Drawing Approvals, Answering technical queries, Progress review, Approving Inspection Test Plans(ITP),Material approvals, attending meetings, final site inspections, co-ordinating with batching plant. Contractually issuing Engineer's Instructions and Memos with and without cost implications, monitoring the progress and target dates, preparing minutes of meetings, Approving monthly interim valuation, invoices, Issuing Payment certificates, provisional acceptance certificate, Final acceptance certificate, quality control with an ISO certified multinational Consultants.

II. January 2000 --- 2002 October: With " FICHTNER CONSULTANTS "Dubai,UAE
Position Held: "Resident Civil Engineer"

Project No1
Project Cost: $ 500 Million
DEWA'S (Dubai Water&Electricity Authority) 800 MW Power Station "K"phase II
Main Contractor: ENEL/ FISIA (ITALY) CONSORTIUM
Contract contained 880MW Power station which have Overall 60000 cu.m RCC Works
And 4500 MT of structural steel works. Civil & Structural works for 3 No Gas Turbines (GT),2 No Back pressure steam Turbines, 3 No Desalination units together of 40 million gallons per dayControl/Service/GIS/Water treatment Buildings,Sea water Pump station which includes dia 2000 mm GRP intake pipes (3No's),Control / GIS for Desal area,Many Fan/Stack/Transformer Foundations all associated drainage/sewerage lines/ Roads.
Project No 2
Project Cost: $ 250 Million
DEWA'S (Dubai Water&Electricity Authority)400 MW Power Station "D"phase II
Main Contractor: HYUNDAI CONSORTIUM
Project includes Repowering to existing power station by adding 3 No's Gas Turbines ( G.T.Building)3 No's Waste heat recovery Boiler's,400 KV Gas insulated Switchgear Bldg,-400 KV GIS Control Building, Piling 1400 No's of Dia 600 mm TO 1400 mm All associated Roads, Drainage and building woks.Contract contained Civil & Structural Works for above items.Overall RCC works 35,000 Cu.mts and 2500 MT of structural steel work.

My Nature of Duties on above projects are Construction supervision by leading a site engineers and surveyors team, Drawing Review, Shop Drawing Approvals, Answering technical queries, Progress review, Approving Inspection Test Plans(ITP),Material approvals, attending meetings, final site inspections, co-ordinating with batching plant. Contractually issuing Engineer's Instructions and Memos with and without cost implications, monitoring the progress and target dates, preparing minutes of meetings, Approving monthly interim valuation, invoices, Issuing Payment certificates, provisional acceptance certificate, Final acceptance certificate, quality control with an ISO certified multinational Consultants.

III 1995 September – 2000 January: K.Home Engineering Ltd., which merged with "Flour Daniel Corporation"
Position held: "Senior Civil Engineer"
1. "Falcon Project" of US $ 500 million.
Contractors: Al futtaim TARMAC,Al naboodah LAING,Alhabtoor Murray & Roberts,etc
Part of Civil and structural works for which I was responsible on this project are as follows.
Overall 80,000 cubic metres of R.C.C. Works and 3500 MT structural steel works for the sub-structure and super structure of the following structures.
Sewage Treatment plant for DUBAL Operations and Residential areas,Construction of Hopper tank, Buffer Tank, Holding Tank, Irrigation Storage Tank, Aeration Tank, Sludge Settling Tank etc.Sewerage & drainage projects: Construction of pumping stations, manholes & inspection chambers,Layings of 2 Kms pressure pipeline, Ø 150mm to Ø1000mm gravity lines, pipes used are uPVC/AC/GRP,Potrooms 5A & 5B which are 850 meters long, had 240 potcells heavy foundations, operation's slabs, structural steel works,Primary, Secondary and buffer silo's A&B. Fume Treatment Plants A&B,380 V Switch Houses A&B, 11/3.3 KV H.V. Sub Stations A & B, Crane Gantry Rails at North and South ends,Office and control buildings,Alumina Tanker unloading stations A&B, Crane Maintenance workshop,Tool room and oversize tap bath stores A&B, Lunch rooms and Latrines, Bus bar trenches and cable drawpits,Drainage and sewage pipe line of about 4 kms of dia 150 mm Upvc to 450 AC pipes, Pumping stations and Manholes construction
Inter connected roads and culverts,Court yard slabs covering 5000 sq.m.approx.
Pipe rack foundations,Piling 1400 No's (600 mm TO 800 mm).

2."Condor Project" of US$725 million.
Contractors: Al futtaim TARMAC,Al naboodah LAING,Alhabtoor Murray & Roberts,etc

Part of Civil and structural works for which I was responsible on this project are as follows.Total RCC works are about 35000 cubic meters on the following projects.
Sewage Treatment Plant Expansion Works, Sewage & Drainage Projects:Construction of Pumping Stations, manholes, inspection chambers,Laying of gravity sewer of Ø150mm to 600mm pipelines,Laying of 2 kms pressure pipelines,Pipes used are pvc/AC/GRP
Anode Baking Kiln No.4 (new),Anode Baking Kiln No.1 (Major Refurbishment),Substations 644 & 680 (Building Nos.),MCC Rooms 681, 682, 645 & 651 (Building Nos.),High quality offices for Central Control Building (Building No.646),Primary and secondary silos (Piling & Construction),Internal Roads, Rodding room upgrading.

My Nature of Duties on above projects are Construction supervision by leading a site engineers and surveyors team, Drawing Review, Shop Drawing Approvals, Answering technical queries, Progress review, Approving Inspection Test Plans(ITP),Material approvals, attending meetings, final site inspections, co-ordinating with batching plant. Contractually issuing Engineer's Instructions and Memos with and without cost implications, monitoring the progress and target dates, preparing minutes of meetings, Approving monthly interim valuation, invoices, Issuing Payment certificates, provisional acceptance certificate, Final acceptance certificate, quality control with an ISO certified multinational Consultants.

1992 May -1995September: Montgomery Watson Hawksley Consultants" Position held: "Assistant Resident Engineer"
in Dubai & Bahrain branches.

Dubai branch: On the following projects: 1. Contract DS 71/1 Al Rigga & Al Muteena Sewerage & Drainage Project:: cost Dhs 55 million.Civil works on the above projects are Construction of 3 no pumping stations,125 no manholes, Hundreds of road gulleys, hundreds of inspection chambers and house connections. laying of GRP/AC/Upvc pressure/gravity pipes ranging from 150 mm to 1200 mm diametre. Laying of pipes by open excavated trenches, by thrust boring methods and by Microtunnelling methods.

Bahrain branch on the following proejct: Contract 74-1/3 trunk sewer for Bahrain Public works department,Cost BD 6 million (UAE Dhs 60 million) Bahrain which inlcudes the following:Dia 450 GRP pressure main laying (1500 metres long),Gravity sewer laying of dia 600mm to dia 900mm GRP/AC Pipes.Construction of major pumping station, Construction of 85 No. manholes.
Nature of duties on the above projects are Construction Supervision by leading a team of inspectors, Site Inspection, responsible for setting out, Quality Control. Issuing memos and agreeing day work measurement sheets. Assisting the Resident Engineer in finalising monthly interim valuations, etc.

1988 October -1991 November: A.A.NASS Contracting Company, Bahrain
Position held: "Site Engineer"(Civil) on following projects

Project 1. Cost BD 4.5 millions(UAE dhs 45 million). Ras Romman Sewerage and drainage project Consultant: Watson Hawksley Consulting Engineer
For PWD Bahrain which includes the following: Construction of 800 No. Road gullies, 1800 inspection chambers, 25 manholes, 3 pumping stations. Laying of gravity sewer line of dia 150mm to dia 600mm clayware pipes. Laying of uPVC gravity drain pipes of dia 150mm to 300mm.Laying of uPVC pressure main line of 350mm dia for 1.5 km long.

Project 2.Cost BD 3.5 millions(UAE dhs 35 millions).Salmabad sewerage project for PWD, Bahrain.Consultant: Gredeco Ansari Consulting Engineer. which includes the following: Construction of 10 Nos pumping stations.Laying of 4 km gravity pipeline of dia 150 mm upvc to 600 AC Pipes and 700 mts of pressure pipeline of dia 150 mm.

Project3.Cost BD 5.2 millions(UAE dhs 52 million).Hoora sewerage & drainage project III
Consultant:Dar al handashah & partners.Which includes construction of 8 no pumping stations,125 no manholes,1100 road gullies.pipes used are 450 mm t0 1000 mm.(AC/GRP).
Also laying of 3 kms pressure pipe of 300 mm upvc.

4."800MW Gas & Stream turbine combined cycle Power station.
Project cost $340 million.Consultant - "Ewbank Preece Ltd.".Civil works on this project are construction of Gas/Stream turbines buildings, 132 KV Switch-gear building, Control Service building, 16 metre high Air condensor columns, boiler foundations,, internal roads, potable water/drainage pipes laying. Manhole and Pumping station construction

1987 January - 1988 October: Roopa Rekha Architects & Consultants,Nandyal. A.P India
Position held: "Civil Engineer (site)"
On construction of Housing Board Colony.(75 Villas).

View contact information...
«« previous resume next resume »»
Search Results (Resumes 901 to 950 of 2794)Go to Search Parameters...
Brief Description
.E Electronics & Communication,
Having more than 8 years of extensive professional experience in project management, construction supervision of internationally aided highway projects including major and minor bridges, cross drainage structural works, assuring the quality of construction as per the approved drawing etc
creative thinking and good communication skills thats makes me successfull mechanical engg. always keen to apply these qualities to increase companies production and achiveing goal.
I AM IN SEARCH OF MECHANICAL ENGINEERING JOB IN PRODUCTION FIELD
Licensed civil engineer and one year contstruction experience
Welding / Piping Inspector having more than 12 years experiance in oil & gas Field.
I am a licensed land surveyor in the Philippines. I was able to practise my profession for 2 years and 11 months. My experience enhanced the knowledge and skills i learned from my university. I worked well with people and enjoyed getting the work at hand completed.
Electronics engineer with 6 yrs exp.
AutoCAD Designer - Architectural/Structural: Specialist for 2D/Advanced 3D Modeling & Rendering w/ AutoCAD 2007, 2D/Advanced surface & 3D Modeling w/ Mechanical Desktop 2005; Planning and Scheduling w/ Primavera Project Planner, User of Windows XP and NT + Microsoft Office applications
Piping supervisor (fibrication,construction,test package reviewing , witness for pressure test with the consultant) i speak two language (english and italian) and i have 27 years of experiences
14 YRS EXPERIENCE IN OIL & GAS FIELD IN INSTUMENTATION.
9½ years specialised experience in piping of Petrochemical plants, Refinery & LNG plant Planning, construction and shutdown field in all the phases. The experience includes 3 years in India, 3years in Kingdom of Saudi Arabia, 6 months in Qatar and 3 years in U.A.E
Seeking a challenging assignment as an HVAC Site Engineer/Supervisor, HVAC Draughtsman, Materials Inspection/Material Handling Engineer - have six years working experience in H.V.A.C Industry. Have good communication skills and eager to take up any new challenges.
Im a registered civil engineer applying for the role "Quantity Surveyor / Cost Engineer/ Estimator" with advance skills in Microsoft Excel & Words, PRIMAVERA, MS Projects and basic knowledge in Construction Cost Management.
M.Eng (Canada), Building work, Roads, Construction Management, Piling work, Worked with Local & International Contractor and consultant
Bachelor Degree:B.SC. DEGREE IN APPLIED CIVIL ENGINEERING.
eight years of experience in geotechnical engineering and specialize in foundation investigation and excavation shoring structure. I worked as a geotechnical engineer in Beijing Geotechnical Institute (www.bgi.com.cn) which is the largest geotechnical corporation in Beijing city.
This will serve as a reference to employer seeking a qualified employee to their company.
8 years of working experience in the field of Electrical Engineering with experience in Design and Construction, Testing & Pre-commissioning for Substations, Industrial, High Rise Buildings, and other infrastructure projects.
I am a civil engineer with an MBA degree from Rollins College, Orlando. I have work experience in geotechnical engineering and transportation engineering. Now, i am looking for an engineering job in one of those fields.
Architectural Draughtsman cum Civil Engineer
Over 18 years of proven expertise in Material Planning & Management, Negotiation, Procurement, Vendor Development, Logistics, and ERP System SAP.
I'm a Civil Engineer with work experience as a project engineer in land development projects
Mechanical and Electrical Draft person And designer .
BMSE with TX PE
Currently Principal Commissioning Engineer on Gas To Liquids project (Qatar), with 16 years experience in chemical and gas industries as operations technician, supervisor and lead commissioning engineer. Experience includes project work control and management.
Mech Engr + 8 years Experience + Overseas experience + large EPC projects + Techinical advisor
Looking for Jr.Engineer/Technician job
Chemical engineer with twenty four years of total experience in the Oil & Gas, Oil Processing and Petrochemical industries, in project engineering, design supervision, multi-discipline engineering co-ordination, contract management, commissioning supervision and construction management.
I am a civil engineer with 8 years experience with different international organizations.
Education : B E Mechanical Overall experience of 8 years in the field of construction , oil and gas. Exposure to latest technologies in IT industry. Having experience with Sultanate of Oman for two years, dealt directly with PDO.
Testing and Commissioning •Turnkey Projects• Construction Seven years of International engineering experience, with particular emphasis on Fertilizer, Steel, and Power Utilities related projects. Executed more than two turnkey projects as a key member in electrical engineering team
Dear Sir/Madam,
Powerplane Mechanical Engineer, HVAC System Designer for Power Projects
I am Creative, efficient, analytical
An ISO 9001:2000 Certified & Well Established in National & International market. Manufacturers of Hydraulic Cylinders & Hydraulic Systems For our valuable customers
Experienced draftsman in Architecture, Electrical and Instrumentation, with basic knowledge of Piping and Civil drafting.
I’m a graduate Civil Engineer with nearly 18 years experience in the Construction of Sewerage, Drainage, Sewage treatment plant, 880 MW, 800 MW Power stations, Major Pumping stations of Sewerage/Drainage/Portable water/ Seawater, Heavy industrial structures, Piling.
Masters in Machine Design , 7+ yrs exp, (ProE WF+ CATIA V5)*Harness Design, Sheetmetal Design
Seeking full time position in the field of Structural Engineering and Geotechnical Engineering utilizing my skills in the analysis and design of structures.
CATIA 5 , ABAQUS, and Hydraulic system
Geologist, supervision on drilling and grouting
Preparation of plan, profile, detailed engineering drawing using AutoCAD, AutoCIVIL,Word and Excel etc including Construction supervision for road and bridge works.
Profile: • Multilingual French MSc. student in mechanical design and production. Able to work on own initiative or as part of a team. • Seeking a full time position in the field of mechanical design and willing to be relocated in USA.
I am an experienced Geotechnical Engineer with a five-year track record in the field of Geotechnical investigations for various projects like Railways, Express Highways, Power Projects, Transmission lines, Airports, Marine Structures etc.
A Fresh Graduate of Bachelor’s Degree in Civil Engineering (Hons). from Universiti Teknologi MARA Pulau Pinang.,
Instrumentation engineer have complite my 4-yr degree in the year 2007. and upgread myself after compliting my degree in automation
Operating System: Windows 95, 98, XP & 2000, Computer Literate with Knowledge of MS-Office 2000, Knowledge of AutoCAD Rel. 14, 2000, 2002 & 2007
Tasks-oriented, analytical professional civil engineer with MBA. Well diversified background in civil & structural engineering consultancy, property development and construction with solid experience in ISO9001 QMS.
Results oriented International Project Manager (IPM) with extensive development experience and strong concentrations in the Telecommunication (s/w and h/w development), Electronic, Automotive and Construction Industries.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   [ 19 ]   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com