Resume - A suitable engineering responsibility to help the Afghan reconstruction processe...

Misco Jobs

Resume #10284

CONTACT INFORMATION:
View contact information...

EDUCATION AND TRAINING:
1975 - 1979
Pasadena City College, Pasadena, California
Completed 117 semester credits in Mechanical Engineering Design and Laser Electro Optics.
AA requirement is 90 credits.

1992 - 1999
The Boeing Company, Seattle, Washington
Over 300 hours company sponsored on-hour and off-hour classes:
Completed all the required classes in CATIA 3D-Engineering software. Classes included, solid modeling, NC programming, advance curves and surfaces, Advance draw, wire frames, Ansolid stress analysis, NASTRAN/PATRAN and ALFINI finite element analysis. Additional classes were in emphasis of composite technology.

1994 - 1999
Henry Cogswell College, Everett, Washington
Bachelor of Science Mechanical Engineering (BSME).
Accredited by the Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology (EAC of ABET)

1999 - 2001
Edmonds Community College, Edmonds, Washington
Certificate in C++, and currently completing classes towards certification for Java, and Visual Basic Programming languages. Currently completed 65 credits with 3.0 GPA in Computer Science related courses.

September 2, 2003 – September 8, 2003
PERSONAL SECURITY TRAINING:
-Progressive Tactical Firearms.
-Travel Pattern Analysis and Specialized Surveillance Detection.
-Advanced Driver Education and Crash Avoidance.
-Evasive Driver Training.
-Off-Road and Specialty Vehicle Driver.

WORK EXPERIENCE:
02/2005 - TO DATE
The Boeing Company
Commercial Airplane Group, (Puget Sound)
Mechanical Engineer (Airplane Tool Design):
Mechanical Hndling Eqipment Tool Engineer for 777, 767 and 747 airplanes.
All tasks requires application of NASTRAN/PATRAN finite element analysis.

05/2003 - 12/2003
Northrop Grumman Mission Systems
Dari/Pashtu languages Translator/Interpreter
Translation for the US department of defense stationed in Kabul, Afghanistan. Due to classified issues I am not in the liberty to give any details.

03/2002 - 02/2003
Worldwide Language Resources, Inc
Dari/Pashtu languages Translator/Interpreter
Persian Dari translation for Operation Enduring Freedom in Afghanistan.
Tasks included Major General Frank Hagenbeck's daily interpretation from Dari into English and English into Dari. Bridging the cultural gap between the local Afghan warlords and US Forces in Bagram Airbase, Afghanistan. Daily Airbase construction interpretations with the locals and the US Army Corps of Engineers were included. Tasks also included, mission accomplishments with CJSOTF team in Bagram, Afghanistan.
Address: P.O. Box 125 Andover, Maine 04216

01/2002 - 03/2002
Titan Systems Corporation/Btg Inc.
Dari/Pashtu languages Translator/Interpreter
Persian Dari translation for US Army's interrogators in Guantanamo Bay, Cuba.
Cultural and ethnic understanding of detainees was constantly debriefed to the interrogation team.

08/1992 - 04/2002
The Boeing Company
Commercial Airplane Group, (Puget Sound)
Mechanical Engineer (Airplane Tool Design)
Ensuring the development and engineering of producible tooling to enable manufacturing to built wing, body, and tail sections for wide body or twin isle and single isle family of Boeing airplanes, which were on schedule and within cost with track records. Support manufacturing and other support organization by providing quick and responsive action to resolve all tool engineering related issues that may impact the quality and pruducibility of the airplane.
Other tasks were to assist in assembly tool engineering plan with Industrial Engineering and fabrication to meet the workflow schedule, and participate in the Integrated Product Team (IPT) meetings to insure the quality, safety, and work flow requirements for the following programs in all separate times and facility locations: 777 Wing, 767-400ER program, 777-300 program, 737-700 and-800 programs (The New Generation), and Boeing Commercial Airplane Group Fabrication division.
Designed Floor Mounted Equipment, mechanical handling tools, and man-lifts for wing major tools. Some design requests consisted over 500 man-hours. The mentioned automatic man-lifts design program was entirely managed and conducted in accordance with the Tool Design/Industrial Engineering request.
Duties included stress analysis using ALGORE -FEA software program.
Other responsibilities included:
Tool Engineering in support of Airline Customer Service Engineering:
Tool Engineering support for the service engineering for Rapid Response Center to support airline customer's request by Investigating & resolving technical in-service structural repair and maintenance issues. Duties consisted reviewing and developing tooling for structural repairs, and working closely with other engineers by performing stress analysis of tools for unique repairs. Participate in Airplane On the Ground (AOG) team damage surveys and repairs and interface with airline customers and applicable Boeing tooling organizations to resolve in-service issues including on-site technical assistance at the customer location. Required at least 20-50% worldwide traveling.

03/1990 to 07/1992
McDonnell Douglas Corporation
Mechanical Engineer (Airplane Tool Design)
MD-11 Program:
Designed mechanical handling equipment and small-applied tools for airplane tail-unit. Completed courses in CADD engineering software. Engineering responsibilities also included direct coordination with internal and external customers to ensure production and manufacturing of the airplane were implemented in accordance with Federal Aviation Administration and airline customer requirements. Safety considered the number one priority, and every design applications were assessed for ultimate human factor and ergonomics.
Supervisor name: Mr. Don Waller Tel: Unknown
Hours per week: 40
Salary per year: $38K/Yr

04/1988 to 02/1990
Fansteel - Precision Sheet Metal.
Mechanical Engineer (Aerospace Tool Design)
F-22 and Rokedyne space shuttle jacket Programs:
Designed assembly and subassembly machine fixture, and autoclave tools for Pratt & Whitney trust reversers engine components. Design also included duct chemical hatching, jet rings and shuttle jackets for NASA's shuttle components, which were contracted to Rokedyne (formerly Rockwell International Corporation now Boeing). Constantly updating customers with three-dimensional view project presentations and step-by-step explanation of the manufacturing processes.

OTHER QUALIFICATIONS:
Mechanical Engineer knowledge of machine shop operations: milling, lathe, drills, press machines, Hewlett Packard (ME-10), CADD, over 15000 hours experience in CATIA-V4 engineering design software with some V5 exposure, ALGORE-FEA, C++, Java, Visual Basic programming Languages, project management, and Optics design. Native speaker of Dari, Pashtu, and Farsi, also knowledge in Afghan political, geography, religion and ethnical systems.

AWARDS RECOGNITIONS:
The Boeing Company:
- Recognition for 777 Airplane Tool Design Support. Seattle, Washington 1997.
- Recognition for employee of the month. Seattle, Washington 1993.
- Recognition for airplane manufacturing support and CATIA engineering software operator excellence. Seattle, Washington 1997
- Recognition for 10th year valued employment. Seattle, Washington 2002.

United States Army 10th Mountain Division, Ft. Drum, New York:
- Letter of appreciation from the office of Major General Frank Hagenbeck. Bagram, Afghanistan, 2002.
- Letter of appreciation from the office of civil affairs. Bagram, Afghanistan 2002.

Untied States Army Command and General Staff College. Ft. Leavenworth, Kansas:
- Letter of appreciation from associate professor of history Colonel Robert Frank Baumann. Bagram, Afghanistan, 2002.

Reuters News Service:
- Letter of appreciation for assisting in documentary filming of Afghan refugees returning home, and Afghan National Army. Bagram, Afghanistan, 2002.

United States Army 1st Battalion (TS), (30th eSB), 312th Regiment:
- Certificate of appreciation for Afghan cultural expertise and linguist skills, Ft. Bragg, North Carolina 2004.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 994)

Go to Search Parameters...

Brief Description

Working in industries that include agricultural, aquacultural, construction, oil/gas exploration, production, refining and wood manufacturing my abilities, skills and qualifications are defined in my resume which only defines a small part of my true hands-on services performed at many levels.

Seasoned construction manager with over twenty years of progressive experience in commercial and industrial construction on both U.S. and worldwide projects in the following industries: Automotive, Semiconductor, Chemical, Cogeneration, Commercial Building, Food and Beverage, Institutional, Hospita

I have 30 plus year of construction knowledge and experience from the field to the boardroom - I started as an assistant field superintendent and climbed within my company to be the CEO/President before leaving in June 2005 to work in the overseas market.

National Certificate in Building Supervision , Scaffold Supervisors Certificate, Skill Elevalation In Scaffold Erectors Certificate, Building Safety Suppervisor Certificate

I'm a Canadian citizen with a Master of Science in Civil Engineering, specializing in Const. Engr. and Mgt. from Virginia Tech. I have nine years experience working on prestigious construction projects - in EPC, CM-GMP, CM Agency, Design Build, and lumpsum environments.

Developed and managed concurrent design engineering initiatives, product development/validation, preparation of specifications and operational documents. This includes, power distribution, Air and water treatment, ISO 9000, ISO 14000, NEC, UBC, NFPA and Title V compliance.

Very dedicated, Hardworking, energetic, creative Tunnelling Operator/Engineer have 11 years experienced in Micro Tunneling. Presently working in Kuwait and willing to relocate anywhere in the world.

I work almost 15 years and I can Repair the following Equipment in my CV

Recent MBA Graduate looking for entry level positions in finance and general business management – Financial, Commercial/Marketing and Project Controls Associate/Analyst. Excellent communicator with fluency in English and Russian. Solid academic credentials in business, economics, analytical finance

20 yrs exp residential contractor

I Hold a BSc in Quantity Surveying and am working towards a Masters Degree in Project Management. In terms of skills, i do Assisting projects manager in overseeing the whole construction process from site acquisition, contract documentation, tendering, adjudication, award, supervision, commission a

Sales, Client Development, Recruiting, Human Resources, Customer Service

Mechanical Engineer with 5.5+ years of experience in Project Planning

QA/QC Supervisor, Welding Inspector

Looking for a Growth in trhe field of rane operations

Highly Skilled Professional

Major skills are in construction and people management

Logistics 10+ years experience including: Commercial (Mining) project logistics; Humanitarian aid ; and, Military. Transportation & Distribution management; Warehousing; Purchasing. Fluent in both English and French; and computer literate.

• 16years of work experience in India/Indonesia in Welding, QC and Site/Construction management in EPC turn key projects (Polymer, CTA, PTA, and Steel). • CSWIP 3.2 Senior Welding Inspector •ASNT NDT Level III in RT, PT & MT •Computer literate in Project Management tools.

Graduate in Bachelor of Science in Civil Engineering and Bachelor of Science in Sanitary Engineering. Presently Employed at the University of Northern Philippines, Vigan City, Ilocos Sur. Im working as a ( project supervisor/project in charge, estimator and Part-Time Instructor)

Five years of progressive working experience within the civil engineering sector in the Middle East. I have worked mainly in consulting discipline of engineering, specialising in Document Controlling and general office administration. I have been involved with the preparation of Monthly Reports, Cor

Cement plant operation,optimization,trouble shooting,refractory management.

A commercially minded quantity surveyor and manager with 17 years experience of managing the financial and contractual matters of projects from pre to post contract in both client and contracting environments. Conversant with many forms of contracts and working within the constraints of deadlines.

Geologist with extensive experience in earthmoving, civil construction, dredging, site management and quality control

Professionally qualified and highly experienced mechanical engineer offering 25 years experience in managing electro-mechanical projects and operations & maintenance of real estate properties.

15 years experience in implementation & maintenance of ISO 9000 QMS, Internal Audits, preparing QA/QC procedures, Quality control in construction of Tunnel, sewer/storm water pumping & lift stations, drain & sewer pipelines, Cross regulators/falls, siphons, bridges.

Project Manager

Free! Ready Mix Concrete - Operations - Production - Plant Construction Manager

safety officer (offshore project)

VP metallurgist with MBA. Extensive experience with 20+ years experience in manufacturing and operations, working in the USA, Canada, and Australia.

I have around 15 years experience as a machine operator on 180 360 degree machines also dozers and dumptrucks. Also as foreman with a groundworks contractor and two years as assistant plant manager with a plant rental company. I am looking for similar work at home or abroad.

LNG, Project Manager

I have work with a variety of cnc machinery. Quality minded using various gauges. Can do set-ups and offsets.

Cranes

Monitoring and Scheduling the Projects

Accomplished purchasing/sales agent in the industrial and construction supply business. Additional education and training in criminal justice. Skills include formulating pricing strategies, conducting competitive sales analysis, maintain customer budget compliance and provide behavioral guidance.

My career as an Consultant has provided me opportunity help the client to expand revenue growth, reduce operating costs and improve overall productivity. I also learned the importance of work in a team where one can produce work within the tight deadlines and to obtain results under pressure.

I would like to continue working in the safety and environmental field. My stronger attributes are in the safety field, but I do have several years experience dealing with environmental issues.

Employed by Centex Homes in the Land Acquisition department. Established a track record for securing quality land development opportunities for Centex. Participated in more than $40 million in development land transaction closings since 2004. Consistently delivered great sites.

Designing AutoCAD & Pro-E

B.Tech Engineer with an heavy equipment experience.

Excellent management skills

I have 3 years Degree from Calcutta University in Kolkata. Then i got certifficate in electrical from Hindustan motors ltd. later on i involved in HDD jobs and Good skill in trenchless drilling with different equipments like Dith witch 27-20 mach 1, Ditch witch 40-20

management experience of a wide variety of environmental projects including international HSEMS, development and implementation of environmental management systems, development and provision of audits and training courses.

Performance driven professional with expertise in telecommunications, construction, and project management

Please Contact ASAP

knowledge of power boilers and operations,glass installation and warehouse/ shipping

A suitable engineering responsibility to help the Afghan reconstruction processes or assist the US Army Corps of Engineers in Afghanistan or Central Asia.

Well versed in Primavera applications (P3,P6, Expedition 10.1); Well versed with SAP PS & MM modules application; Well versed with Cost Engineering/Cost Control applications & processes

Communicates well at all levels, high integrity and personal commitment.Good organisation and leadership skills.

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out