Resume - Mining engineer with special passion for drill and blast operations but experien...

Misco Jobs

Resume #20728

CONTACT INFORMATION:
View contact information...

WORKING EXPERIENCE
Sep 2003 - I have been at home working as a security and safety consultant providing burglar-alarm and fire-alarm solutions for companies and homeowners as well as helping companies with fire-prevention documentation needed according to new Swedish legislature.

Feb 2003 – Sep 2003 I took a temporary job as a supervisor for Byggs, supervising grouting and shotcreating operations, leading one shift of pre-grouting and shotcreating operations for the permanent rock-support of a railroad tunnel during the star-up stage of the project.

Feb 2000 – Feb 2003 I was working as a supervisor for BESAB on road-tunnels in Stockholm leading one shift of pre-grouting and shotcreating operations for the permanent rock-support of the tunnel system.
We also did grouting operations using chemical grouting agents in areas with heavy leakage.
After the permanent rock-support was finished we also were contracted to cover areas with persisting water-leakage with foam-rubber drainage-mats that were then shot-created over.
On this project I was to great deal responsible for the administration of subcontractors and I also introduced a system for keeping track of all extra work ordered by the main contractors supervisors to our personnel in the tunnels thereby ensuring that we received payment for the extra work being carried out.
I also took on the task of ensuring that all our progress reports were checked and properly logged in our computer-system presenting accurate reports to the main contractor, Skanska co.
I was also responsible for ordering and purchasing materials as well as keeping records of the materials consumed and taking inventory.

Feb 1999 –Feb 2000 I spent at home working on my house and spending time with my family.

Oct. 1997- Feb.1999 I worked a tunnelling supervisor for Skanska Co. In Zimbabwe.
We were making a 4.2 km. tunnel for water-supply to the third largest city in Zimbabwe. We used a high-speed tunnelling method using rail-born equipment such as a Atlas Copco boomer drill-rig and the Häggloader loader and shuttle-cars from Rockmachines and locomotives from GIA of Sweden. My main job was as tunnelling supervisor. I also did follow-ups concerning statistics, project planning and progress. On many occasions I also worked as tunnelling superintendent/production-manager taking care of the entire site. I supervised the drilling and charging, the mucking-operation and the laying of rail, surveying and planning.The rock-support consisted of spiling and rock-bolts, shotcreating and grouting. We worked in two shifts continous around the clock averaging about 3,5 complete round per day with an advance of about 3,6-3,7 meters per round.
On this project I improved the blasting procedure and also improved the servicing of the rails and other service-works in the tunnel as well as training local workforce.

July 1994 – Oct 1997
I was hired as a blasting engineer at Saudi Chemical Co. in Saudi Arabia. I worked at, what was at the time, the worlds largest underground projects in Madinah, Jeddah, Abha, Bureida.
The projects very large underground oil-storage caverns for the SSSP ( Saudi Strategic Storage Programme). The main contractor was ABV Rock Group and we worked as subcontractors taking care of all the blasting being carried out on the different sites. I supplied blasting patterns, blasters, supervision and security. I was also in charge of closing adjoining areas in order to provide safe blasting conditions as well as being in charge of the explosives stores. On the Bureidah site I was promoted to blasting/project manager. I was also in charge of drilling and blasting operations for an extension of the highway in Riyadh. The job consisted of bench-blasting a cut through the rock to accommodate the highway. On that site we were also responsible for the drilling. I then moved to Al Khobar and became blasting manager for a pipe-line project from Al Khobar to Riyadh. The total length of blasting was just over 190 kilometres which was blasted at a rate of 1 to 2 kilometres per day in one blast. The trench we were blasting was only 7 to 12 metres away from an existing pipe-line so we had strict vibration levels that we had to follow, so the task also included setting out vibration-monitors and follow up on the readings taken and presenting them to the client. The work was done for ARAMCO and the main contractor was SAIPEM Co. of Italy. The project was finished ahead of schedule and at a lower cost than budgeted.
I also led the construction of the storage area for the explosives, getting them approved by the local police, organising the explosives and the records necessary to comply with Saudi legislature.
I was responsible for hiring a storekeeper, all dealings with the explosives police and all other matters enabling us to carry out the daily blasting operations
I also spent one week in Yemen, on behalf of the sales division, where I looked at some various projects, highways and military installations, and made suggestions for different improvements and recommendations regarding blasting material. Upon return to Saudi I wrote reports regarding the different companies I had visited and my projections for potential business with them.

Sept. 1989-July 1994 I worked as a miner for Boliden Mineral in Garpenberg, Sweden. Among other things the job consisted in drilling, blasting, mucking out, rock-bolting, and general mining chores.

EDUCATION
2003 I took another course in blasting technique at Dyno Nobel

1989-93 Studying at the Swedish school of mines and metallurgy in Filipstad, Sweden,
Where I graduated in mining engineering and civil engineering in june-93.These studies covered all aspects of underground and surface rockworks such as mechanics, design-engineering, computer technology, electrical engineering, mechanical engineering, physical and applied chemistry, business economics, materials testing, particle technology, statistical methods, personnel administration, mineralogy and petrology, geology, underground surveying, prospecting, mining engineering, mineral processing and mineral technology. During my studies I also did six months as a junior engineer at NITRO CONSULT in Gothenburg, Sweden. During my time there I was involved in test-blasting, vibration measurements and analysis, risk analysis for project planning of Lundby road-tunnel in Gothenburg, Sweden, well depth soundings, pre-blasting inspection of buildings and structures, cost optimization analysis when drilling 7.6 metres deep production rounds at LKAB of Malmberget, Sweden.I also took a course in blasting techniques at Nitro Nobel.

1980-82 Military service (15 months) as junior officer in the Swedish artillery,as commander of a heavy howitzer platoon, including 60 – 70 soldiers all weapons, vehicles and material
The training also included field surveying, demolition blasting, learning to drive heavy trucks, wheel-loaders and other heavy equipment.

1977-80 Studied for three years at Tingvallagymnasiet, Karlstad, Sweden

1976-77 Studied one year as an exchange-student in Broomfield, Colorado, USA.

QTHER SKILLS
Language skills;
* English – excellent
* German – fair
* French – little
* Spanish – little
* Arabic – a few phrases

* I am quite at home working with a computer.
* I have no problems adapting to different environments and cultures.
* I am an experienced traveller.
* Holds a drivers license for car and heavy truck
* Holds a blasting license (Swedish)
* Instructor at local Swedish national guard regarding practical use of civilian explosives.
* Active in Swedish national guard.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 1131)

Go to Search Parameters...

Brief Description

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Tehnical Skill: able to fix trouble shooting such as : Hydraulic, Electric and Power Train system of heavy equipment. Abel to manage more then 250 people subordinates

Sr. Health & Safety Engineer - OHS Procedures, Training, Inspection, Audit; HSE Plan, Objectives, Matrix etc.

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

2 years experience in an Open pit coal mine. I have done long term planning for pit and dump, various professional reports, tailings dam design and monitoring, and yearly budget planning. Therefore, I have experience in both mining and geotechnical engineering.

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

I have ability on heavy duty equipments operation,fms dispatch system using high technologies,mine supervision as well.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

International Safety / Risk Professional available for fulltime or contract employment.

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

I would like to apply for a position where I can use my extensive experience in Managing, Coordinating, Supervising, Inspecting and Maintaining and my dedication to quality in Systems installation, Electrical engineering, Maintenance and Repair to help you obtain your company's mission.

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

Blueprint Reading - Mig, arc and gas welding

HSE ENGINEER AND SUPERVISOR

Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

BE in Mechanical Engineering.

Logistics/Shipping Coordinator with 6 years experience in an EPC company handling various oil and gas projects worldwide. Proficient in logistics operation, with good communication and negotiation skills and could lead a group of people in a project.

Maintenance Technician

Plant / Substations Operation, Maintenance and Testing

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

Catia V5, Unigraphics, Pro-Engineer, Solid Edge

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Good Mam/ Sir My name is Denver Moodley. I am a qualified Advanced Life Support Paramedic working in Africa for International SOS remote site projects. I am keen to explore the option of Contract work with better opportunities and would be grateful if you consider my placement in one of your remot

I drive a fork lift and i can use power tools and i have my mine safety pappers

CSWIP 3.1 Welding Inspector, MIGAS Welding Inspector, Familiar with Software (Auto Cad, PDMS, Pro-Eng), Familiar with Microsoft Office (Word, Excel, Power Point, Visio)

I am a maintenance planner engineer and MAXIMO specialist in a petroleoum company. I worked as a MAXIMO specialist for 2 years before planning.

I believe by going through my academic qualification and rich working experience of four years in abroad and seven years in India on computer operation and office administration. I have commitment and loyalty; can work at any pressure, hard situation and provisional environment.

Security, life support, camp management, logistics

I am an enthusiastic highly motivated Quantity Surveyor / Cost Engineer, with an excellent working knowledge of pre & post contract quantity surveying and also pro-active team member with experience of major construction projects. I have gained deep awareness of contract administration and advanced

Technical Writer / Editor and Proposal Writer

Truck Driver with experience in oil field activites.

Mining engineer with special passion for drill and blast operations but experience of many aspects of contemporary mining/rockworks operations. International experience and excellent language skills.

Electrical engineer (2 years experience),researcher(1 year experience)

I am a motivated graduate with qualifications in Geological Engineering, Applied Petroleum Geoscience and Quantity Surveying and I am proactive, confident with excellent communicative skills. I am flexible in my approach work, accurate and punctual. I am focussed and motivated with eye for details

BEng.(Water Resorces and Environmental Engineering),Microsoft Office,AutoCAD

Safety specialist, tertiary trained, extensive experience,

I am a seasoned QMS Internal & External Auditee, a trained QMS Internal Auditor and Document Controller, currently managing the implementation of ISO 9001:2008 (QMS) for a company in Nigeria. I have over five years experience in both Oil and Gas industry and Insurance Company working as document con

Chemical engg. with 70% and working in Technip as a process/piping engineer.

Instrumentation and Controls Engineer

I have worked in the construction field for the past 11 years in every element mother nature could throw at us. I also have alot of experiance with the day to day up keep of tractors and large trucks, and some wielding/fabricating work aswell.

I am a mechanical engineer (B.E) having 7 years of experience in erection, commissioning, operation and maintenance of power plant equipments

Recently graduated with a Bachelor Degree in Business Administration (5/2007). Worked at Bisco Industries as a Management Trainee/Sales, 11/2007 – 07/2009.

Free! Esri Software Senior Developer

I perform a variety of duties as well as working in a collaborated team player environment; 3 plus years of experience in clerical work as well as Customer Service work; Ensure that the necessary quality records are specified, generated and controlled in accordance with the appropriate procedures;

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out