Resume - Power Generation- Twenty-eight years experience of Construction, Startup & Commi...

Misco Jobs

Resume #2546

CONTACT INFORMATION:
View contact information...

Professional Experience

04/02-Present COMBINED CYCLE SITE STARTUP MANAGER
Kiewit Industrial Corporation
High Desert Power Project, Three-on-One Combined Cycle Unit, Siemens Westinghouse 501FD Gas Turbines, ABB HRSGs with Duct Burners and SCR, Toshiba Steam Turbine, Westinghouse Ovation DCS, US Filter Zero Liquid Discharge and Aquifer Banking Water Treatment
Victorville, CA
- Supervised and coordinated activities of the Startup staff.
- Developed Primavera Critical Path Method schedule for Pre-operational Testing and Initial Startup and Operation phases.
- Identified Startup Staff Manload requirements and hired appropriate staff.
- Responsible for Startup staff budget including craft and staff labor, subcontracts and materials.
- Set Walkdown Standards to verify unit built to technical specifications.
- Developed Requests for Quotations for Startup subcontracts.
- Prepared System Scoping and Start-up Packages, package content requirements and supervised development and completion of the packages.
- Developed System Startup Workplans for component and system checkout and integrated operations.
- Developed and implemented Construction Work List and Owner Punchlist Tracking Program.
- Implemented Startup Administrative Procedures including System Engineer Training.
- Established Cross Reference database for all EPC deliverables to appropriate turnover documentation.
- Implemented Lockout Tagout Procedures and developed Startup Work Permit Procedure.
- Developed Preventative Maintenance Program.
- Developed procedures and methods for compliance with California Energy Commission requirements.
- Issued Warranty Claims to Vendors.
- Established Door, Panel and Equipment Key control and turnover, including index generation
- Established Startup Spares identification requirements, ordering and tracking.
- Established Vendor Rep Scheduling, Owner notification, Service Reports, Filing system.
- Developed Facility Demonstration and Performance Tests.

01/02- 04/02 COMBINED CYLE HRSG COMMISSIONING CONSULTANT
Aalborg, Inc. / PIC
Bastrop Energy Center, Two-on-One 535 Mw Combined Cycle Unit, GE 7FA Gas Turbines, Aalborg Duct fired HRSGs, Mitsubishi Steam Turbine
Bastrop, Texas
- Provided oversight of installation, commissioning, and start-up processes for the HRSGs and their auxiliaries.
- Performed Erection Mechanical Completion walkdowns.
- Pre-identified all potential expansion issues.
- Monitored HRSG performance during steam blows and full load operation.
- Performed post Steam Blow gas path inspections and problem identification.
- Established final system setpoints.
- Provided Operator classroom HRSG fundamentals and operations training.
- Resolved all Warranty issues.
- Assisted Duke Flour Daniel with integrated plant operational issue resolution.

11/00-11/01 COMBINED CYCLE LEAD MECHANICAL COMMISSIONING ENGINEER
OCM GANTT
James A. Vann, Jr. Power Plant, Two-on-One 500 Mw Combined Cycle Unit, Siemens Westinghouse 501FD Combustion Gas Turbines, NEM HRSGs, Mitsubishi Steam Turbine
Gantt, Alabama
- Responsible for verification / completion of the 501FD Installation and Commissioning record books.
- Develop and implement routine preventative maintenance program.
- Review P&ID's and engineering documents (data sheets, etc.)
- Develop/Implement Mechanical Startup and Test Program.
- Supervise/assign work to Mechanical Technicians and construction crafts.
- Interface with constructor, owner and vendors to support testing activities.
- Review / Finalize complete System Turnover Packages.
- Perform system walkdowns and prepare punchlists, coordinate punch list completion activities.
- Conduct and direct cleaning, flushing and commissioning of all mechanical systems
- Correct Mechanical problems within start-up Scope of Work.
- Work with client and O&M staff in support of start-up testing and on-the-job-training.
- Prepared and maintained Mechanical portion of all System Turnover Package and as-builts.
- Resolve basic and detail technical and engineering mechanical and control design problems
- Prepared and administrated Safety and Clearance Tagging Procedure
- Prepared a complete listing of all air system isolation valves and the components affected by their shutoff
- Prepared Gas Blow Procedure and maintained total site control and supervision during gas blows

11/00-3/01 COMBINED CYCLE STARTUP MANAGER
OCM GANTT
James A. Vann, Jr. Power Plant, Two-on-One 500 Mw Combined Cycle Unit
Gantt, Alabama
- Prepared Start-up Package List, package content requirements and supervised development and completion of the packages
- Implemented OWDL (Outstanding Work & Deficiencies List) Tracking Program
- Established Cross Reference database for all EPC requirements to appropriate turnover documentation
- Issued Warranty Claims to Vendors
- Established Door, Panel and Equipment Key control and turnover, including index generation
- Established/Participated in Critical Path Method scheduling for Pre-operational Testing and Initial Startup and Operation phases
- Established Borrowing of Spare Parts and replenishment
- Established Vendor Rep Scheduling, Owner notification, Service Reports, Filing
- Determine/Implement Startup's role in Development, Review and Approval of Acceptance Test Procedures, Operations Manuals including Systems Descriptions and Integrated Facility Operating Instructions

8/99-11/00 COAL PLANT LEAD MECHANICAL COMMISSIONING ENGINEER
Black & Veatch International
Paiton Power Station Phase II, Coal Fired 2 x 610Mw (Siemens, ABB, BVI consortium)
Paiton, Indonesia
- Perform erection completion inspections, pre-startup equipment checks, integrated startup, testing and optimization of this prototype standard
- Resolve basic and detail technical and engineering mechanical and control design problems
- Technical interface between Client and Consortium Partners
- Technical issue tracking and expediting
- Turnover Package documentation completion
- Senior Authorized Person to establish isolation measures for designated systems
- Prepare and maintain Mechanical portion of all System Turnover Package and as-builts.
- Implement routine preventative maintenance program.
- Supervise/assign work to Mechanical Technicians and construction crafts.

1/99-8/99 ICS-24 HRSG COMMISSIONING MANAGER
ABB HRSG Group
Berkshire Power Station
Agawam, MA
- Develop Commissioning Inspection and Testing Plan
- Develop all Cold and Hot Commissioning procedures for equipment, integrated checkout and the performance test
- Perform erection completion inspections, pre-startup equipment checks, integrated startup and testing, and final performance evaluations of the HRSG and its accessories
- Provide Quality Assurance of Owners Turnover Package records during commissioning
- Assist Erection Advisor in resolution of construction, erection and engineering problems for this prototype Next Generation HRSG
- Assist in Product Line Development

5/96 – 12/98 INSTRUMENTATION & CONTROL LEAD TECHNICAL CONSULTANT
ABB-CEII, ABB Combustion Engineering International, Inc.
Ulchin Nuclear Generating Station 3&4
Ulchin, Korea
- Technical Advisor to the Startup and Permanent Plant I&C Departments during construction, construction acceptance testing, pre-operational testing, cold hydro, hot functional testing, and power ascension testing.
- Assist in NSSS system initial startup, checkout, and calibration including Modicon PLC's, Foxboro Micro Spec 200 control and process instrumentation, ABB-CE Protection and Control systems
- Assist in BOP system initial startup, checkout, and calibration including all Radwaste systems, Eaton Plms 32 Plant Control system, Eagle & Allen-Bradley PLC's, Primary and Secondary Sampling system, Turbine-generator auxiliaries
- Provide training and assistance in Protective System Pressure Ramp Response time testing, RTD response time testing, and Reactor Protection System Channel response time testing
- Provide extensive interface with overseas vendors for problem resolution of I&C, Electrical, and Mechanical systems
- Engineer corrections and field implement design deficiencies
- Provide configuration control and startup troubleshooting of Radiation Monitoring System computers, software and OS/2 operating system
- Assist in troubleshooting Plant Monitoring System (Plant Computer)
- Setup, train and troubleshoot Concurrent Temporary Data Acquisition System

12/93 - 5/96 OPERATIONS LEAD TECHNICAL CONSULTANT
Combustion Engineering International, Inc.
Yonggwang Nuclear Generating Station 3&4
Yonggwang, Korea
- Technical Advisor to Operations, I&C, Electrical, and Mechanical Departments during construction, construction acceptance testing, pre-operational testing, cold hydro, hot functional testing, power ascension testing, and commercial operation.
- Performed system walkdown and inspections during all phases
- Performed Test Working Group technical review of I&C, Electrical, and Mechanical System preoperational tests and test results
- Prepared Operations Hot Functional and Power Ascension Test Procedures
- Developed the NSSS and Turbine-Generator Warranty Test Procedures
- Performed Plant Nuclear Safety Committee technical review of power ascension test procedures and results
- Prepared Operation's test procedure test summaries and test reports
- Worked extensively with I&C Department to resolve problems on NSSS and BOP I&C systems
- Worked extensively with GE Technical Advisor to resolve all Turbine-Generator Operational issues and startup problems
- Interfaced with overseas vendors for problem resolution of I&C, Electrical, and Mechanical systems
- Prepared scheduling for testing phases and work outages for the units
- Assisted in performance, calculations and data analysis of the NSSS and Turbine-Generator Warranty tests

11/89 - 12/92 LICENSED SENIOR REACTOR OPERATOR TRAINING CONSULTANT
Arizona Public Service Company
Palo Verde Nuclear Generating Station
Wintersburg, Arizona
- Qualified classroom and training instructor for Initial License and Requalification Programs in all areas (I&C, Electrical and Mechanical)
- Developed and prepared classroom and simulator training program materials for Reactor Operator, Requalification, and Shift Technical Advisor
- Performed Senior Reactor Operator, Reactor Operator Task Analysis
- Delivered Initial License, Requalification, Shift Technical Advisor classroom and simulator training programs
- Developed Initial License and Requalification Program Exambanks
- Administered annual Requalification examinations and provided Requalification upgrade training

11/86 - 11/89 SENIOR REACTOR OPERATOR SIMULATOR PROGRAM DEVELOPER
Florida Power and Light Company
St. Lucie Nuclear Generating Company
Port St. Lucie, Florida
- Performed Senior Reactor Operator/Reactor Operator Task Analysis
- Developed Simulator training program for Reactor Operator, Senior Reactor Operator, Requalification and Shift Technical Advisors
- Developed Simulator Evaluation program and Job Performance Measures in accordance with NUREG 1021
- Upgraded all classroom and simulator training materials to incorporate procedure changes, plant modifications and industry lessons learned
- Delivered Shift Technical Advisor Training
- Developed software code for an automated exambank

3/83 - 11/86 LICENSE TRAINING INSTRUCTOR
Arizona Public Service Company
Palo Verde Nuclear Generating Station
Wintersburg, Arizona
- Developed and prepared Initial License training program materials in accordance with INPO accreditation criteria
- Delivered Initial License classroom training including NSSS & BOP Instrumentation and Control Systems, Mitigating Core Damage, and Transient Accident Analysis
- Developed and delivered training course in GE Mark III Analog Turbine Generator Control and Support Systems
- Administered annual site Requalification License Examinations

1/83 - 3/83 SIMULATOR ACCEPTANCE TESTER
Combustion Engineering
Windsor, Connecticut
- Performed acceptance test procedures and validation checkout of Calvert Cliffs simulator under construction
- Analyzed simulator performance for correct operational/theoretical response, direct interface with programmers/engineers and Fortran 77 code to determine the hardware/software deficiencies

2/81 - 11/82 SENIOR REACTOR OPERATOR
Illinois Power Company
Clinton Nuclear Power Station
Clinton, Illinois
- Performed/supported initial startup and testing of I&C, Electrical and Mechanical systems during construction, startup and turnover phases of this BWR 6
- Directed on-shift activities of reactor operators, plant equipment operators and test engineers
- Developed plant operational, surveillance and test procedures for I&C systems
- Performed technical review and audit of I&C startup procedures

2/80 - 2/81 COMPUTER/FIELD SERVICES ENGINEER
Bandag, Inc.
Muscatine, Iowa
- Installed and setup industrial testing computers at dealers nationwide
- Provided initial and continuing training on computer operation
- Performed computer troubleshooting and repair
- Performed I&C maintenance and calibration
- Performed electrical and mechanical repair of AC and DC drive equipment

10/78 - 2/80 ELECTRONIC ANALYST
Motorola, Inc.
Mt. Pleasant, Iowa
- Performed setup, calibration, troubleshooting and repair of manufactured electronics equipment
- Performed Root Cause Analysis on electronic component failure
- Provided initial and continuing training to forty electronic technicians

11/72 - 10/78 ENGINEERING WATCH SUPERVISOR / REACTOR OPERATOR
U.S. Navy
- Supervised I&C, Electrical and Mechanical Equipment Operators during overhaul, testing, and operational phases of a submarine PWR plant at sea and in overhaul
- Lead engineer in charge of I&C equipment operation, calibration, maintenance and repair
- Directed training and requalification of Reactor Operations Department

Accreditations
- PVNGS Senior Reactor Operator Certification
- NRC PWR Senior Reactor Operator, Docket No. 55-60176
- Clinton Power Station BWR 6 Senior Reactor Operator
- Navy- Reactor Operator, Nuclear Engineering, Radio Electronics Technician, Radar Electronics Technician, Advanced Electronics, Industrial Management and Supervision, Supervisory Skills for Industrial Managers

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1120)

Go to Search Parameters...

Brief Description

Free! Twenty five years of mining and construction experience in both surface and underground. Lead Quality Engineer for MTA East Side Access NYC. Chief Inspector for Construction Management on The Heartland Corridor Project in West Virginia. Chief Inspector for the city of Atlanta on the West Area CSO.

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

My techanical abilities in the use of Primavera and my leadership skills may be of significant interest to you. Upon review of my qualifications I think you will find that I would be a very valuable member to your company.

Manager of milling department woodworking division, wood lamination, sawmill manager, lumber quality checker, logs scaler.

Maintenance Planner / Scheduler

Dedicated, creative individual with broad experience in project controls and project administration demonstrating interpersonal and organizational skills, with a proven ability to learn and adapt to change efficiently.

electrical/mechanical superintendent/ project manager

Electroplating and running chemical an run test on them and check qc on parts

For the past twenty two years I have pursued a career as a Linesman, acting principally as a team player with additional professional duties.

Thirteen years of problem solving, decision making, upward career progression and increasing responsibility. Extensive hands-on experience administering, planning and managing operations in the following functional areas: facilities management, project supervision, procurement, staff development, bu

Procurement & Contracts Expertise

Project Manager: Responsible of the coordination and execution of the following projects: • Warehouse Management System (Oracle WMS) • Overall Revision to the actual ACP Master Catalog . Inventory Re-engineering Program

I have worked many years in the construction field and I have knowledge of all aspects from ground breaking to completion.

Working field superintendent

-Has wide working knowledge and experience on automotive production line.

Cement Production Supervisor // Senior Cement Process Engineer //

Surface Sciences, Polymer Chemistry and Physics, UHV Techniques, Materials Sciences, Thin Film, Single Crystal.

Results orientated, hands on multitasked, multifunctional, dedicated manager. experienced in materials. Systems, logistics, & operations management. I am the go to guy to save you from losses in time or money. Please e- mail or call me so we can get together on filling your current opening.

I am 46 years old, hardworking and trsupervision. Seeking permanent employment overseas. ie: Dubai.ustworthy. My attendance is 100%, never having had any sick time from my work in 25 years of full time employment. I can use my own initiative, and am able to work without supervision.

Experienced General Manager with Emphasis on Sales and Operations

heavy equipment mechanic

• Perspective gained through advancement from field operations, through front-line supervision to senior staff management and administrative positions.

Executive Director, Operation In Charge, Managing Director

Free! Experienced Project Manager, Divisional Manager, with a proven track record of success in Construction, Interiors and Finishing works. MEng Degree Mechanical Engineering, ILM level 5 Diploma in Management,CITB Appointed Persons.IOSHI Certified.B S Construction Health and Safety

Safety Management Position

Operate a machine on a assembly line, especially operate a automatic welding machine.

Civil engineering design consultant and project management professional

27 year veteran contracts manager , civils and epc specialist

Remote Site Expert : Global Experience.

Project engineering which involves inspection of instruments like control valves, on off valves, valve actuators, various type of analyzers etc.

Senior executive with 17 years experience with MEP, design build, G .C., PM firms and owners side construction. New business operations, new division creation with demonstrated success in entrepreneurial environments. Projects consisting of ground up construction, renovations, commercial

I have been working in Kingdom of Saudi Arabia FOR 18 years as grader operator. And now i want to work in Canada as grader operator.

Mechanical Engineer 22 years experience design, projects

10 years experience 7 years in paksitan & 3 years in dubai & i have the bachlor of arts degree & some diplomas in health safety & envoirnments.

Experience Surveyor

Executive Management level experience and expertise

Over 23 years of rich experience in Technical Training, Erection & Commissioning, Production Planning and control,Safety,Environment,Health, and Quality in the fertilizer industry and Petrochemical industry seek suitable new assignments in Training and Development in Fertiliser,Petroleum,Petroche

Extensive experience in the construction industry in the field of architectural and civil/structural works of residenses, townhouses, condominiums and commercial buildings including interior and exterior finishing details. A highly motivated project supervisor, proven ability to solve site problems.

Looking for growth

31 yrs. old, 13 yrs heavy equipment accident free operation including all dozers, graders, scrapers, etc etc. Currently mainline hoe operator (345bl) thousands of hours roadbuilding, loading trucks and laying pipe. Extensive experience with gps and laser grade systems. Ability to cut grade.

HSE

Diploma in Civil Engineering (3 Years)

Transmission Planning Engineer, BES Operations Engineer, PTI/PSSE Consultant

as per attached

June 2003 ©¦EPresent Company: JGC Corp Location: China Position : Schedule Controller May 2002 ¨C March 2003 Company: FAFCO Location: Saudi Arabia Position : Planning & Scheduling Engineer

35 continuous years of national and international commercial construction experience

Experienced in power plant operations and startup.

Geodesist/Land Surveyor/Geomatics/GIS consultant

Power Generation- Twenty-eight years experience of Construction, Startup & Commissioning, Operations & Training for Combined Cycle Units, Coal Fired and Nuclear Steam Supply Systems (NSSS) & Balance of Plant (BOP) Systems as Lead Mechanical, Lead I&C, Lead Operations and Startup Plant Manager.

All type of Light & Heavy Lifting & Transportaion job

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out