Resume - NACE INTERNATIONAL Recognised CIP III Qualified Coating Inspector

Misco Jobs

Resume #31932

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS

ACADEMIC
- University Degree
- Bachelor of Science (B.Sc.) with Chemistry, University of Burdwan - India

Technical

Coating & Painting
- NACE INTERNATIONAL, USA.
- CIP Session I, Session II & Level 2 (New Version) Qualified Coatings Inspector
NACE International, Houston, Texas, U.S.

Passive Fire Protection
- CHARTEK
- QC Inspector for Chartek Fireproofing Systems
- International Coatings Ltd, Essex, U.K.

Quality
- IQA/IRCA Registered Training Scheme
- Documentation, Quality Management System & ISO 9000
- Internal & Lead Auditor

Health, Safety & Environment

Safety
- Safety Instruction Course for SHIP REPAIR MANAGER
- Occupational Safety and Health (Training & Promotion) Centre, Singapore

- Safety Committee Member Training
- Singapore National Employers Federation, Singapore

HSE
-Identifying Environmental Aspects & Impacts
- Risk Assessment
- EQS Asia, Singapore

SKILLS
Development Training
- Projecting Your Professional Image
- ST College, Singapore

EMPLOYMENT HISTORY

May 2005 to present ƒç SMOE Pte Ltd, A SembCorp Utilities Company, Singapore, SEA
QA/QC Senior Engineer - Lead Corrosion Protection

December 2004 to May 2005 ƒç Hyundai Engineering Construction Co., Ltd., in Tripoli, Libya.
QA/QC Engineer - Corrosion Protection

October 2003 to November 2005 ƒç Consortium of Technimont SpA, Milan, Italy & Saipem s.a. - Paris, France
QA/QC Engineer - Lead Corrosion Protection

December 1997 to October 2003 ƒç Punj Lloyd Limited, New Delhi, India
QA/QC Engineer - Coating & Insulation

January 1992 to December 1997
M/s. B. B. Engineering, Durgapur, West Bengal, India
Senior Executive - Workshop

WORK EXPERIENCE SUMMARY

INTERNATIONAL EXPOSURES:

On-going International Projects with my present organisation in Singapore:

* Bohai FPSO Project, China. Owner / Client - Conoco Phillips.
Works: Construction of Top Side Modules & Integration - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

* Third Transmission Pipeline Project, Bongkot, Thailand. Owner - PTT. Client / Consultant - Bechtel International. Consortium - SMOE Pte., Ltd., - Singapore & Saipem s.a. - France. Works: Construction of Living Quarters & Process Modules for Offshore Platform System - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

* Erha FPSO Project - Nigeria Deep Sea Water Project. Owner - Exxon Mobil (ESSO Exploration & Production Nigeria Ltd.). Prime Contractor - Saipem s.a., Paris, France. Works: Construction of Top Side Modules & Integration - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

Previous International Projects with my previous organizations:

* Western Libya Gas Project, Onshore Mediterranean Sea, Tripoli, Libya. Owner - AgipGas BV Eni. Consortium - Snamprogetti SpA, Italy & Hyundai Engineering Construction Co., Ltd., Seoul, South Korea. Works: Construction of Onshore Gas Process Terminal - consists of Construction, Hydro test and Commissioning of Process Piping, Storage Tanks, LNG Tanks along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

* Shell LNG Receiving Port & Terminal Project, Hazira, Surat, India. Owner - Shell International. Consortium - Technimont SpA, Milan, Italy & Saipem s.a. - Paris, France. Works: Construction of LNG receiving Port & Terminal including Cryogenic Tanks & Piping, Structural Steel, Civil, Instrumentation & Electrical Works, Equipments erection & Installation.

* MSPF - Once through Hydro Cracker Unit (OHCU) Project. Client - IOCL Panipat Refinery. Prime Contractor - Daelim Industrial Company Ltd., Seoul, Korea. Consultant - EIL. Works: Construction, Hydro test and Commissioning of Unit Piping along with Structural Steel, and Equipments.

WORK EXPERIENCE SUMMARY

INTERNATIONAL EXPOSURES:
Previous International Projects with my previous organizations:

* FUJAIRAH WATER & POWER PROJECT (Pipelines), Abu Dhabi (UAE). Client - UAE Offsets Group. Prime Contractor - Technip, GmbH, Germany. Consultant - Fichtner. TPIA - Bureau Varitas. Works: Construction of 9 nos. Water Storage Tanks.

* SULPHUR RECOVERY UNIT (SRU) & VIS BREAKER UNIT (VBU). Client - Chennai Petrochemical Corporation Limited (CPCL), India. Consultant - EIL. Prime Contractor - Petrofac International, USA. Works: Construction, Hydro test and Commissioning of Unit Piping and Storage Tanks Including Structural Steel, Civil Works, Instrumentation, Equipments erection and related Piping.

* SULPHUR RECOVERY UNIT (SRU) & VIS BREAKER UNIT (VBU). Client - Chennai Petrochemical Corporation Limited (CPCL), India. Consultant - EIL. Prime Contractor - Petrofac International, USA. Works: Construction, Hydro test & Commissioning of Unit Piping & Storage Tanks Including Structural Steel, Civil Works, Instrumentation, Equipments erection& related Piping.

* SULPHUR RECOVERY UNIT (SRU), OFF SITES & UTILITIES PROJECT. Client - IOCL Guwahati Refinery, India. Consultant - EIL. Prime Contractor -Siritec Nigi sPa, Itally. Works: Construction, Hydro test and Commissioning of Unit Piping and Storage Tanks including Structural Steel, Civil Works, Instrumentation, Equipments erection and related Piping.

* DABHOL LNG POWER PROJECT. Client - ENRON. Consultant - Bechtel. Prime Contacctor - Lintech / Skanska International. Works: Construction of 03 nos. 160,000 Cu.m. capacity LNG Cryogenic Storage Tanks and Regassification Unit, part of 2184 MW capacity distinguished power project.

* MSPF - Once through Hydro Cracker Unit (OHCU) Project. Client - IOCL Mathura Refinery. Consultant - EIL. Works: Construction, Hydro test and Commissioning of Unit Piping along with Structural Steel, Civil Works, Instrumentation and Equipments erection.

* LPG CRYOGENIC PAKAGE. Client - Reliance Petroleum Ltd., Jamnagar Refinery. Consultant - Noevel LGA / DNV. Works: Construction of 01 no. LPG Cryogenic Storage Tank and related piping works.

* Marine Tank Farm Project. Client - Reliance Petroleum Ltd. Jamnagar Refinery. Consultant - Bax Counsel. Project management - Bechtel India Limited, S.A. Works: 23 nos. of Crude Oil Storage Tanks and related piping works.

WORK EXPERIENCE SUMMARY

- 13 years of total experience in protective coatings
- New construction onshore & offshore, Oil & Gas, Refineries, Steel & Power Plants projects
- Maintenance contracts onshore and offshore locations
- Shutdown contracts onshore and offshore locations
- Special skills in
- Coating, Painting & Linings
- Passive Fire Protection
- Thermal Sprayed Aluminium

CORE RESPONSIBILITIES

Project Management

- Title, function, responsibilities and authorities
- Key contacts for co-ordination
- Scope of work, project contractual requirements such as milestones and completion schedule
- Design engineering, fabrication and construction sequence
- Review specification (including all amendments and pertinent appendices), applicable codes and standards
- Conflicting requirements, project field change requests, technical deviations and engineering change notices
- Pre-job conference records or minutes of meetings
- Attend ad-hoc clarification meetings with client
- Review tender documents for paint supply subcontract
- Attend tender clarification meetings with paint vendors
- Review paint vendor priced & un-priced (technical) documents
- Perform audit at paint vendor facility to assess capabilities
- Submit assessment report & recommendations on potential paint vendors
- Attend technical & commercial negotiation meetings with paint vendors
- Attend paint vendor finalization meeting
- Review paint vendor documents
- Project history or track record
- Project specific site technical representatives resume
- Key personnel - title, function, responsibilities and authorities
- Daily report or log
- Specific field tests & reports
- Laboratory test reports
- Review tender documents for blasting & painting subcontract
- Attend tender clarification meetings with subcontractors
- Review subcontractor priced & un-priced (technical) documents
- Perform audit at subcontractor facility to assess execution capabilities
- Submit assessment report & recommendations on potential subcontractor
- Attend technical & commercial negotiation meetings with subcontractor
- Attend subcontractor finalization meeting
- Review subcontractor documents
- Project history or track record
- Project organization chart
- Resume of key personnel
- Key personnel - title, function, responsibilities and authorities
- Manpower histogram
- List of plant, machinery, equipment, tools, inspection instruments & site office facility
- Procedures
- Inspection test plan
- Daily progress report
- Daily inspection report
- Review company procedures and inspection test plan
- Ensure effective utilization of subcontractor resources
- Monitor subcontractor performance
- Monitor project schedule planned VS actual
- Identify areas in critical path, cause and effect
- Establish, implement & monitor recovery plan
- Attend quality surveillance with client
- Conduct co-ordination meeting
- Conduct weekly meeting with subcontractor
- Review & verify subcontractor monthly valuation
- Advise contracts department on variation orders & claim
- Constant co-ordination with project management team

CORE RESPONSIBILITIES (Continued)
GENERAL OVERVIEW

- Cause and effect of corrosion
- Protection, maintenance and prevention of corrosion
- Design and material selection
- Anti-corrosion protective coatings
- Surface preparation methods
- Mechanical surface preparation during pre-fabrication and onsite portable centrifugal blasting
- Open air blast cleaning
- Vacuum blast cleaning
- Hydroblast cleaning
- Wet blast cleaning
- Hand and power tool cleaning
- General uses of coatings / linings / wrappings
- Painting
- Galvanizing
- Thermal Sprayed Aluminium
- Passive Fire Protection
- High performance internal linings
- Tape wrapping
- Cement linings
- Self leveling compounds
- Anti-skid deck coatings
- Type of coatings commonly used and the major components of coatings
- General physical and chemical properties of the generic types of coatings and application process of coatings / linings
- Calibration of inspection and test instruments
- Using coatings inspection and test instruments
- Defects affecting performance of the applied coatings
- Causes for most common coating defects
- Inspection of defects on coated surface
- Acceptable and unacceptable defects
- Identification of defects and implementation of repair procedure
- Premature failure analysis of coatings
- Protective coating inspection standards for field and shop applications
- Internal spin blasting and spray painting methods
- Plural spray method
- Hot spray method
- Documentation

Enforcement and verification of work performed in accordance with specification, manufacturer recommendations and applicator coating procedure.

- Witness applicator qualification or trade test and paint system qualification
- Measure ambient conditions, surface temperature and air quality requirements
- Inspect location and suitability of access for areas of work
- Inspect type of blasting equipment and tools to be used
- Inspect type and size of blasting media
- Inspect metal surface imperfections / defects
- Test indication of oil or water in compressed air
- Test conductimetric analysis of water-soluble ionic contamination of blasting media
- Inspect pre-cleaning or solvent cleaning of surface
- Measure compressed air pressure
- Inspect degree of cleanliness required
- Measure surface profile of blast cleaned surface

- Assess surface cleanliness of blast cleaned surface
- Assess surface cleanliness soluble salt contamination on blast cleaned surface
- Inspect coating material storage conditions
- Inspect type of coating material to be used
- Monitor thinning, mixing, induction time and pot life
- Inspect type of coating application equipment and tools
- Monitor application method, type and pattern
- Measure wet film thickness by notch gages
- Non-destructive measurement of dry film thickness of non-magnetic coatings applied to ferrous surface
- Non-destructive measurement of dry film thickness of non-conductive coatings applied to non-ferrous surface
- Destructive measurement of dry film thickness of coatings
- Monitor re-coating and final curing schedules
- Test MEK resistance of Inorganic Zinc Rich Primers by solvent rub
- Test film hardness
- Measure the adhesion of coatings applied
- Test pull-off strength of coatings applied
- Test discontinuity (holidays or pinholes) of nonconductive coatings and linings

Health, Safety & Environment

- Understand local and international legal and HSE regulations
- Project specific HSE requirements
- Witness tool box briefing, safety surveillance & safety audit
- Attend monthly management safety committee meeting
- Conduct project safety co-ordination committee meeting (Permit to work system)

Administration

- Delegation and distribution of responsibilities
- Employee recruitment
- Employee training needs & wellness programs
- Employee appraisal
- Constant interaction, counseling & team building session

OBJECTIVE
Obtain a position that will allow the utilization of my skills tempered by over fifteen years of professional experience in Coatings and, ultimately, to become a long term, highly valued employee of a successful organization.

PRESENT REMUNERATION
USD 3000 per month for 10 Hours work per day.
Over Time paid @ 1.5 for work after 10 Hours (Monday to Saturday).
Over Time paid @ 2.0 for work on Sunday & holidays.

PERKS
Fully furnished family accommodation + Free Transportation + Bonus + AWS + 30 Days paid annual leave with to & fro family air tickets.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1132)

Go to Search Parameters...

Brief Description

I am a Survey Engineer, experienced in multi disciplinary projects, with a good track record of world class projects. I am highly interested in any position with international or overseas exposures and possibility to maximize skills in Surveying, Management, acquire new ones and progress.

More than 8 Years experience in piping & Steel Structural pre-erection, post-construction engineering activities, and Oil Drilling Services on Land and Offshore Rigs; Worked in Middle East, Central Asia and India under international and well-known construction companies like Schlumberger Drillin

Dear Sir, I am a highly motivated person who works hard to accomplish my vision for the Future. The success of your company fits perfectly within my vision, and I firmly Believe I possess the tools to help your company thrive. In my most recent experience, I took on a leadership position a

33 Year old Dutch national with 10 years of HDD project management in Asia, Europe and FSU, now living in China.

With over three years of experience in commercial and highway projects, I have developed a strong background in planning and designing; consequently, I have developed effective quantitative and drafting skills in AutoCAD 2D &3D and MicroStation/GEOPAK, Inroads, TransCAD, LDD and also planning skills

Chemical Engineering, Control System engineer. Pipeline operation. Catalyst

My objective is to secure a challenging position in the natural gas, oil or petroleum pipeline industries as an operations and maintenance supervisor or as an inspector. I have over 25 years of progressive experience in the natural gas transmission and distribution pipeline industry.

Mining & construction Equipment, Oil field production, Power generation

Journeyman Heavy Equipment Operator/Foreman 10 yrs exp.

Livelink Administrator, Causeway Collboration Administrator

I completed my Bachelor of Science in Agricultural Economics and Agribusiness in the year 2001 and have completed the MBA programme majored in International Business in August 2008.

Catia, Solid Works, Solid Edge, Pro/ENGINEER, Adobe, Microsoft Office ( PowerPoint, Access, Project ), Photoshop, Blue Prints, Design, Product Development, Plant Layout Strategy, Six Sigma, Lean Manufacturing, 5S, , Injection Mold Press, Class A/CDL license, Lathe, Forklift, Donkey-lift, Milling

PARAMEDIC(ADVANCED LIFE SUPPORT)/FIREFIGHTER/ EMT RESCUE TECHNICIAN

I am conversant with offshore rig operations,such as;logging while drilling,measuring while drilling, mudlogging,formation evaluation.I got this skills at chevron,during a nine months intership.

Responsible of Logistic, Warehouse, Purchase for Inter. Infrastructure Works Contractors

NACE INTERNATIONAL Recognised CIP III Qualified Coating Inspector

I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.

Camp, facilities, catering Management

i am having 13 years of experience in condition monitoring and in plant inspection includes vibration, vibration analysis, balancing, ndt, coating & corrosion and welding inspection.

Mining Engineer with Business Administration experience in one of the world's largest cement company

A young, dynamic, astute, confident, result-oriented and self motivated person with the ability to handle pressure of a working environment and also work well within a team. Smart in appearance, proven starter with strong analytical skill and an enthusiastic fast learner.

4 years experinece in electronincs and electrical related works and in embeddeded sytems

HUMAN RESOURCE PLANNING, ADMINISTRATION, RECRUITMENT & SELECTION, ORIENTATION, TRAINING & DEVELOPMENT, PERFORMANCE MANAGEMENT & EMPLOYEE RELATION MANAGEMENT

17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.

More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

Would like to personally discuss my qualifications and personal resume in greater detail and look forward to scheduling a personal interview with you in the near future. I have my T.W.I.C. Industrial safety Training. 24 hour Hazwoper/Forklift Certification. Confined Space Training;

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

Planning/Schedule Engineer,Maximo IMplementor,

Electrical systems testing, quality control, repairs, troubleshooting, electronics, component design, and/or training and development

Safety Officer / Safety Supervisor / Safety Advisor

With a demonstrated commitment to establishing and maintaining safe work practices, I am seeking to positively contribute to a progressive organisation, and wish to be considered for employment as the Emergency Manager. I have over 14 years experience within the emergency services sector, consider

I am a multiskilled candidate with more than two years experience. I have acquired Engineering as well as Business Education. I am fully convesant with Corrosion Prevention system for Underground pipings, API 650 standards for tank design and HSE standards.

Logistician in all logistical related fields. All logistical work has been conducted overseas.

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Good analytical mind, good communication skill, result oriented and team player.

Having Cement and Pharma R&D Experiences, I would like aquire a career in the same feild. My Skills includes that,I can work with part of team or indepentantelly. Fast decision making, analytical skill.

Possess a background in Security including BS Justice Studies, US Military, Federal Law Enforcement, and Int'l Security Mgmt experience.

My background is varied in both in education and 'hands on'. I currently hold a B.S. in Natural Science and an A.S. in Electronics, In the areas of 'hands on', my background includes but is not limited to maintenance on various types of equipment.

a young engineer who has versatile knowledge in mechanical engineering , marine engineering and electrical wiring/installation(domestic and industrial)

Graduate with 5+ yrs of experience

Mechanical Piping Engineer/ Autocad Engineer

Project Controls/Sr.Planning/Project Engineer

12+ years of experience/education in Logistics/Transportation Management

Yokogawa- Centum CS-3000,CS1000 DCS,Triconex(Invensys) – Tricon & Trident PLC (Emergency Shutdown System),HIMA PLC (Emergency Shutdown System),Emerson Process Management -Delta-V DCS,Yokogawa-Prosafe PLC ( Fire & Gas Detection System, Emergency Shutdown System ),ESD,F&G

Skills: electronics mech (technician) S.M.t component repairing and touch up through whole component assemble, soldering work and production supervision , testing of electronics tuner with the help of oscilloscope, fault finding etc Qualification: Under Graduate and 2 year diploma in electronics

Diplom engeneering geology with one year of experiance in break water

Im currently an engineer in ghana in africa for a caterpillar dealership working mainly on power generation all over ghana including 2 mine sites. My duties include breakdowns servicing and maintenance and major overhauls . I also teach locals and supervise them .

I have worked in natural gas and oil production plants where duties included both operating and repairing associated equipment. I know how to operate most tools, heavy equipment and can fabricate a lot of my own parts.

COMPUTER LITERATE, LOGISTICS SHIPPING,AIR IMPORT EXPORT

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out