Resume - Senior Process Engineer with 13 years of Experience in Petrochemical and LNG pro...

Misco Jobs

Resume #36450

CONTACT INFORMATION:
View contact information...

Career Focus:

To work in leading organizations where I can use my skills and knowledge gained for the successful business of the organization and my career growth.

Resume Summary:

Experience as Process Engineer in Oil and Gas and Petrochemical plants.

Have worked in processes licensed by UOP, ORTLOFF, AIR PRODUCTS, MERICHEM, BP Chemicals and IFP.
Strong up-to-date knowledge of the process like sweetening, dehydration, NGL extraction, liquefaction, sulphur recovery and LPG treaters.

Experience in BP chemicals polyethylene process and IFP's alpha olefin process.

P&ID review and update. Heat and Mass balance calculations. Experience in simulation using HYSIS. Debottleneck study and technical reporting. Process Risk Assessment and HAZOP study.

Experience:

Process Engineering
* P&ID checking and updating.
* Knowledge of International codes and interpretation.
* Understanding the philosophy of process technology for capacity expansion and critical analysis of Process licensor's recommendation with a view of future operations as well as past experience of operation.
* Provide technical support for LNG trains and Gas plants.
* Have done Heat and Material balance calculations.
* Have done feasibility study for de-bottlenecking of the plant.
* Presented a technical report on the plant performance.
* Plan and execute High Rate Test of LNG plant for enhancing the capacity of the plant.
* Interact with process licensors for debottlenecking process constraints, plant visits.
* Tuning of various process parameters to conduct different trials of catalysts, additives etc and evaluation of the same considering overall impact.
* Initiate projects and provide technical support to enhance the capacity of the plant and to improve the reliability of the plant
* Written Standard Operating Procedures for Emergency handling and Operation of the individual units of the plant.
* Experience in HYSIS and have done simulation for pressure drop estimation, line sizing, equipment sizing.
* Prepare documents MOC (Management Of Change), to record changes in operating conditions and philosophies; conduct risk assessment for process and operations deviation so that the integrity of the plant is not affected.
* Expertise in PIS, LIMS, ATOMS, Process Surveillance Report.
* Have developed the skills of Acoustic Induced Vibration study and Vent dispersion study.

Process Plant Operation
* Experience in operation of Polyethylene plant with safety as the foremost priority to achieve the production targets that meets customer satisfaction and profitability of the organization.
* Have done planning and coordination of various maintenance groups to upkeep plant performance and minimize unplanned breakdowns so as to have a low cost of ownership.
* Experience in Honeywell TDC3000 DCS operation.
* Identification of process control requirement and implementation of new control philosophy and control language programming.
* Trouble shooting and rectification of existing Control Language program to accommodate new process requirements.
* Building of new tags, logic points and groups for operation and monitoring.
* Monitoring, analyzing and trouble shooting of sequences, process and system alarms.
* Subordinate development through proper training and guidance.
* I was a contributing member of the Six Sigma team in the project for improving the ON-Grade production during Grade changes.
* As a member of the Butene-1 revamp team I have done P&ID review and HAZOP study, Involved in pre-commissioning and commissioning activities and was responsible for stabilization and test run of the plant.
* As a member of the TIE-IN group of the project team in the LLDPE/HDPE expansion project with INNOVENE Technology I have done finalization of retrofitting tie-in points, checking of actual hook ups, preparation of check list, as-built checking of the plant, preparation of checklist for mechanical completion of plant and identification of various loops for pre-commissioning activity like line purging, sheet blasting, line flushing etc.

Skills:
* Excellent communication skills across the corporate hierarchy as well as across different functional groups.
* Have proven abilities to work in a group and as an individual as well as to lead the team inculcating the team spirit in the group.
* Create a culture of safety across all functional groups.
* Identify a problem, analyze, trouble shoot and find a solution to the root cause.

Present Employer:

PROJECO on behalf of
TECHNIP MIDDLE EAST
DOHA, QATAR
(Working on secondment with RASGAS, a LNG operating company)

Position: Senior Process Engineer

Responsibilities:
Provide technical support to LNG facility Operations to maintain safe and reliable operation.
Liaise with all engineering disciplines to identify and pursue opportunities through ATOMS (Asset Team Opportunity Management System) to enhance capacity and improve the reliability and integrity of the Asset.
Provide Stewardship for Management Of Change, closing of RCFA action items.
Present weekly and monthly updates to Asset management and the Team of Base Business Engineering studies, MOC status, RCFA status, ATOMS report.
Interact with process licensors and equipment vendors.

Pevious Employers:

1. CHIYODA CORPORATION
JAPAN
(FROM JUL'2006 TO DEC'2006)
Position: Process Engineer
Responsibilities: As a member of the LNG project engineering team was actively involved in the HAZOP, mark up of nodes, preparation of HAZOP report, coordinating with discipline engineers for closeout of HAZOP action items.

2. INDIAN PETROCHEMICALS CORPORATION LIMITED
Maharashtra Gas Cracker Complex
Nagothane, Raigad
Maharashtra, India
(from sep'1995 to jun'2006)
Position: Manager
Responsibilities: Responsible for successful execution of de-bottlenecking project. Maintain safe and reliable operation. Subordinate training and development.

3. NEYVELI LIGNITE CORPORATION LIMITED
Neyveli, Tamilnadu, India
(FROM APR'1995 TO SEP'1995)
Position: Graduate Engineer Trainee
Responsibilities: Under the guidance of the plant manager took training in the Briquetting and Carbonisation section.

Education:

Degree/Certificate University/Board Year of passing Grade

Bachelor of Technology (Chemical) Regional Engineering 1994 I
College Tiruchirappalli, India.

Energy Manager Bureau of Energy Efficiency, India 2005

Energy Auditor Bureau of Energy Efficiency, India 2007

Notable Technical Trainings Received:

Control system US/AMC Implementation training by Tata Honeywell, Pune
Energy conservation Pinch Technology
Process safety Hazop Workshop by Tata AIG
Risk Assessment Risk assessment – Level 2 training by Exxon Mobil

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 997)

Go to Search Parameters...

Brief Description

A computer literate with proficience in the use of various product management softwares to monitor and control stock movement. Ability to work without supervision and also to work under pressure. An innovative person who always explores better ways of doing things positively and team player

Camp, facilities, catering Management

911 Paramedic with 10+ years in emergency medicine to include former Army EFMB medic and USAF medical technician.

Construction supervisor (industrial civil works , Algerian HND) (48 GAS wellheads linked to 2 Production trains to 4 marine offloading systems

Ex Firefighter 18 years, Breathing Apparatus, Confined Spaces, Fully Qualified Pllease view my CV

I&C ENGINEER - 9 years experience. Control Valves, flowmeters, shutdown systems, proximity sensors, and PLC programming. Oil Production, Refineries, Power Plants.

17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.

Trained in handling Emerson Process Management (formerly Fisher-Rosemount Systems) DeltaV Digital Control Systems (DCS) with Foundation Fieldbus field instruments at Emerson Process Management main Headquarters in Austin, Texas U.S.A. and Asia Pacific main Headquarters in Pandan Crescent, Singapore.

More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

Fire Prevention, Job Safety Analysis, Hazard Analysis, TOR,

CAT parts logistics supervisor with five years experience in supply chain management and 8 years experience in Multinational organizations. I hold a bachelor degree in Commerce, political science, commercial representation certificate from the ministry of foreign trade & a certified Java programmer.

I have 5 years experience in power station operation and maintenance Gas turbine(GE LM 6000 PC&PD),steam turbine(Mistubishi 300MW)

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Having Cement and Pharma R&D Experiences, I would like aquire a career in the same feild. My Skills includes that,I can work with part of team or indepentantelly. Fast decision making, analytical skill.

Possess a background in Security including BS Justice Studies, US Military, Federal Law Enforcement, and Int'l Security Mgmt experience.

My background is varied in both in education and 'hands on'. I currently hold a B.S. in Natural Science and an A.S. in Electronics, In the areas of 'hands on', my background includes but is not limited to maintenance on various types of equipment.

My skills include operation of a voriaty of heavy equipment in the areas of enviromental, paving, dirt and utility work

Specialist in Security, Safety and Risk management

Entry Level Electrical/Instrumentation Engineer. Senior Field Engineer LWD/MWD with Schlumberger in different countries. Strong prepartion for projects and Jobs will lead to over expected results.

HSE ENGINEER

Senior Process Engineer with 13 years of Experience in Petrochemical and LNG process

Im a highly qualified Gas turbine operator/ I have worked on Construction/Commissioning/Operation Of Alstom GT13E2, TM 2500,GE Frame 9,6, and Solar Gas Turbines

To obtain a 2nd class welder/boilermaker position that utilises my vast experience as a welder and my experience with steel fabrication.]

HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

Document Control

A highly motivated and resourceful Engineer / Supervisor with experience in the Oil Industry with international companies in the construction, and upstream maintenance and operations.

College Degree, Supply Process Development & Continuous Improvement, Sourcing & Procurement Strategies, Bid & Proposal Evaluation, Negotiations, Supplier Selection, Contracts, Equipment/ Materials/ Components & Services, Cost Reductions, Training, Presentation of Results.

Certified security supervisors trainer from SITO. Certified courses on Fire fighting, First Aid and different courses on security operations.

Expertise in handling instrumentation systems like Inlet Gas Metering Systems, ABB & DANIEL Gas Chromatographs, Analyser Management and Data Acquisition Systems, Process Gas Analysers, Process Monitoring Field Instruments and Custody Transfer Equipment. with proven abilities in reducing downtime.

I am Vaka Vasavi, at the verge of finishing my Masters in GIS at UT Dallas. Currently working on my Master Project which will conclude my course work at UTD, at the same time I am looking for an internship/Fulltime position in a organization which would benefit from my GIS knowledge, skills and

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

MECHANICAL ENGINEER HAVE MORE THAN 9 YEARS EXPERIENCE WITH WITH RANGE OF EQUIPMENTS . IN MY RECENT JOB, I AM RESPONSIBLE ABOUT SCHEDULING AND PERFORMING TH PREVENTIVE AND CORRECTIVE MAINTENANCE OF TWO VESSELS AND OIL POLLUTION CONTROL EQUIPMENTS .

Geotechnical Engineer specializing in rock/soil engineering and numerical modelling, based in Vancouver, Canada. Looking for a challenging career opportunity worldwide in natural resources sector, civil/mining geotech consulting or academia.

Career in logistics management during the past ten years. Operational background from the ground up with cargo airline, third party logistics provider, freight forwarding, marine and air cargo charter, and oil & gas industry experience in remote locations, namely Alaska and Russia / FSU.

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Rigger crane op scaf

B.E (Mechanical) with 3 years of experience in automobile industry (sheet metal), good working knowledge of Pro/Engineer, Pro/intralink and exposure to Catia V5.

Project Control, Corporate Treasury, ERP Application Consultants

Thirty years as city of Winnipeg Fire Paramedic Service working through the ranks to a position of Captain . Knowledge of field and operation within emergency field.Experience in organizing and directing personnel. Extensive training in safety sector as National Construction Safety Officer and Consc

Concrete mixer driver with 8 years experience. Concrete plant operator for 1 year. End loader operator and site supervisor 4 winters. Class A-CDL drivers license with hazmat and tanker endorsement.

hnician/manager with over 15 yrs experience in train scheduling and safety. Expertise in train circulation graphing, train scheduling, and statistical analysis of safety and performance. Strong mathematical, analytical and problem-solving skills; demonstrated leadership; sharp eye for detail.

A B.S Chemistry graduate of University of the Philippines in the Visayas; research team-member on “Ecological Assessment of Iloilo River. Phase I: Identification and Quantification of Pollutants of Iloilo River” for the year 2003-2005; had OJT at the National Pesticide Analytical Laboratory, Dept.

I am a Mechanical Engineering working in a Service company. I have two Msc one of them in Oil and Gas Engineering. I consider myself as a multi skilled Engineer

I have a cumulative of 5 years field work experience and my experience varies from manufacturing/processing environment to Information Technology and Oil & Gas.

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

Experienced construction project manager with heavy background in petrochemical production operations

A qualified Deep Sea Captain (Master Mariner) with 15+ years Offshore: - Jack-Up platform (as Barge Master, Rig Mover ) - DynamicPositioning (DP2 Dive/ROV) - Heavy-Lift Constrcution/Offshore Installation/Platform removal/Pile Driving - SEMISUBMERSIBLE Units (as Barge Master)

Result-driven in Civil Engineer with seven (7) years technical experience in Construction of Oil and Gas, Petrochemical, Industrial Oil Petroleum Refinery, LNG trains onshore facilities and Residential/Multi-Storey Buildings Development Projects.

Graduate with Bachelor Degree in Science Surveying and Geomatics (Hons) from Universiti Teknologi Mara Shah Alam

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out