Resume - 12 Years of Experience in the field of QA/QC Supervision Inspection of Electrica...

Misco Jobs

Resume #37084

CONTACT INFORMATION:
View contact information...

I have more than 12 Years of in depth Experience in the field of Quality Control and Assurance, Supervision, Inspection and Pre-Commissioning of Electrical, Instrumentation and Cathodic Protection Systems for Oil and Gas Plants, Remote and Relief Manifolds, Gas Gathering Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, Main Line isolation Valve stations, Pump house, Intermediate scraper traps, In-let area, Electrical Sub-Stations and Overhead Power Transmission lines, in accordance with International Technical norms (NEC, NFPA, NESC) Saudi Armco and SCECO Engineering Standards.
* Installation of Power Transformers, Switchgears, Motor Control Centers, Switch racks, Disconnect switches, Circuit breakers, Emergency Diesel Generators, Direct Current system, Relay panels, Marshaling Racks, Remote terminal units, Well Shutdown Hydraulic panels, Instrument junction boxes, Battery chargers, Cathodic Protection Rectifiers, Photo vatic systems, Instruments.
* Installation of under ground and above ground Conduits, Cable trays, Duct banks, Power, Control and Instrument cables.
* Erection assembling and Pre commissioning of 69kv and 13.8kv Overhead Power Transmission lines.
* Construction of Electrical Substation Building, Central Control room, Marshalling rack room, Battery room, and Operation Support Building.
* Calibration of Instruments such as Pressure transmitters, Flow transmitters, Level transmitters, Temperature transmitters, Pressure switches, Temperature switches, Pressure indicators, Temperature indicators, Pressure relief valves and Temperature recorders.
* Installation and Testing of Ground Grids for Sub-stations, Well head facilities and Manifolds.
* Pre-commissioning and Testing of Switch rack Breakers, Transformers and Motor control centers and Hi-Pot Testing of power cables.
* Installation of Cathodic Protection system for Well heads, Transmission pipelines, Flow lines and Trunk lines, such as Deep anode bed, Distribution anode bed, Horizontal anode bed, & Temporary C P systems.
* Material Inspection and identification as per Project specification.
* Implementing Quality Control requirements on construction sites mainly in the installation of Electrical, Instrumentation and Cathodic Protection systems, Preparation of Quality Control Procedures and Inspection Test Plan in accordance with Saudi Aramco and applicable International standards.
* Prepare and Submit Electrical Test packages and Instruments Loop packages for clients approval and records, Maintain documents in respect of Quality requirement and Quality control check list, inspection test plans and Reports incorporate latest applicable industrial codes and Saudi Aramco engineering standards,
Experience: February 2003 to date. SUEDROHRBAU Saudi Arabia Limited
(a member of KOOP group Netherlands)
Kingdom of Saudi Arabia.
Certified Electrical & Instrumentation QA/QC Supervisor.

Here I worked More than 4 Years as a Certified Electrical & Instrumentation QA/QC Supervisor at Following Saudi Aramco Projects.

* Aramco Contract # 16122: Khurais Seawater Injection and Distribution Headers, Khurais.

* JCP Contract # 0074: Jubail Chevron Phillips (JCP) and Juaymah Gas Plant, Sales Gas, Propane, Supply from Juaymah Gas plant to Jubail Chevron Philips Plant, Jubail.

* Aramco Contract # 14789: HNRP NGL Plant, Hawiyah NGL Recovery Plant Upstream & Downstream Gas Pipelines, Project, (Hawiyah NGL to Hawiyah Gas Plant) Hawiyah.

* Aramco Contract # 14521: Shedgum Gas Plant, SHY-1 Expansion Phase 1 Pipeline Capacity Increase, Shedgum to Yanbu. (2 Grade Gasoline and Additional Capacity Projects) Shedgum.

* Aramco Contract # 14408: Onshore Maintain Potential Construction, Shedgum. (Trunk lines and Oil Well's)

* Aramco Contract # 13508: North T/L # 1, 2&3 and Associated wells to Haradh Increment III, Haradh.( T/L, F/L and Oil well's)

* Aramco Contract # 12727: Haradh Khuff Gas Project, Haradh.( Khuff & Jauff Gas Wells)

* Aramco Contract # 10935: Haradh Gosp-3, Haradh Al Crude Increment Phase III Pipeline Project, Haradh.

Duties & Responsibilities:

* Co-ordinate function with client Inspection Department, site Engineer, Sub-Contractors and Project Management, preparing Inspection two weeks look ahead schedule. Checking of site and measurement of completed work. Attending the meeting with client Engineers, unit head and superintendent.
* Responsible for clearing the Technical Query's with consulting service department (CSD), client engineers and design department.
* Responsible for the Supervision, Inspection, Monitoring, Preparation and Implementation of Quality plan in Electrical, Instrumentation, Communication and Cathodic protection activities.
* Coordinate Quality procedures to construction department, Project management and client Inspectors, Coordinate the E-log book Answers and Corrective actions for client inspection comments, attending the weekly QA/QC meeting.
* Drawings review and check field installation in conformance with Saudi Aramco Standards, and International standards.
* Material receiving Inspections for identification and damages, Preparations of non-conformity reports in all deviations and violations of approved standards met during Inspections.
* Prepare request for inspection to client for inspections and acceptance of installations and Testing.
* Supervision of clearance of exception items lists, Prepare documentation & filing system of all Quality plan to delivery to client.
* Ensure all works done as per client drawing & other applicable industrial standards.

December 1997 to February 2003.
SUEDROHRBAU Saudi Arabia Limited.
(a member of KOOP group Holland)
Kingdom of Saudi Arabia.
Certified Electrical & Instrumentation QA/QC Inspector.

5 Years I worked as a Certified Electrical & Instrumentation QA/QC, Inspector, at Following Saudi Aramco Projects.

* Aramco Contract # 44658: Qatif Down Stream Pipeline Project, Qatif. ( Interconnect the pipeline between Qatif Gosp-1 to Berri Gas Plant, Juaymah Tank forms, Rastanura Refinery, Rastanura South Terminal and Qatif Gosp-2)

* Aramco Contract # 44496/01: Haradh Gas Plant Project, Haradh Gas Gathering Manifolds &Transmission Pipelines, Haradh. (Haradh, Waqar and Tinat Gas Gathering Manifolds, 69 kV / 13.8 kV Substation and Power Transmission Lines)

* Aramco Contract # 47206/02: South Haradh Khuff Gas Project, Haradh. (Khuff Gas Wells, Remote Header and Flow lines)

* Aramco Contract # 47206: Khuff Gas Projects, Hawiyah.( Khuff Gas Wells and Flow lines)

* Aramco Contract # 45845: Flow Line Central Arabia, Nuayyim.

* Aramco Contract # 45633: Shaybah Oil Field Development Project, Shaybah

* Aramco Contract # 45052: Flow Line Central Arabia, Hawtah.

* Aramco Contract # 45000: Electrical & Instrumentation, Hawtah.

Duties & Responsibilities:

* Responsible for Inspection and Monitoring of Electrical, Instrumentation, Communication and Cathodic protection activities.
* Inspection of Installation, Termination & Testing of electrical equipments, U/G and A/G conduits, cable trays and tubing for instruments, Photo vatic system for Cathodic protection, Instruments lab calibrations.
* Installation of Cathodic protection systems such as Deep anode bed, Distributed anode bed, Horizontal anode bed, & Temporary C P systems.
* Preparing Electrical & Instrument test packages.
* Installation Inspection of Over head power transmission lines such as pole framing, pole erection, hardware installation, conductor sagging, string, clipping & testing.
* Inspection of all Electrical, Instrumentation and Cathodic protection activities, Ensure all works done as per client drawing & other applicable industrial standards.
* Inspection for testing of Circuit breakers and Transformers.

June 1997 to December 1997.
SUEDROHRBAU Saudi Arabia Limited.
(a member of Suedrohrbau International German)
Kingdom of Saudi Arabia.
Electrical & Instrumentation Foremen.

6 Month I worked as a Electrical & Instrumentation Foremen.

* Aramco Contract # 45000: Electrical & Instrumentation, Hawtah.

Duties & Responsibilities:
Supervision of all Electrical and Instrumentation Works, Installation, Termination & Testing of Electrical equipments, conduits works, tubing, cable trays, Power, Control cables, Perform calibration of instruments, Installation of Photo-vatic systems for Cathodic protection, Assist Client during commissioning

August 1995 to June 1997.
Lewis Electrical and Re-winders, Karnataka, India.
Site Supervisor.

2 Years I worked with Lewis Electrical and Re-winders, Karnataka India, as a site Supervisor for their Sites and shop floor.

Duties & Responsibilities:

Management and supervision of construction and maintenance of Electrical works, such as installation of power panel, installation of lightings, power outlets, installation of the laundry equipment, cable pulling and termination to their respective equipment/devises, installation of motors and wiring systems for Ice plant, Milk Factory and sugar mills, electrical and plumbing installations of Public Housing, High standard Villa, Installation of submersible pumps for watering systems, Maintenance of power generator, water pumps, panel boards, rewinding of motors.

Summary:
I worked on different Gas & Oil field projects with Saudi Aramco as an Electrical and Instrumentation QA/QC Supervisor / Inspector. I worked on different major projects in different plants all over the Saudi Arabia like Berri Gas plant Jubail, Juaymah Gas plant Juaymah, Rastanura refinery Rastanura, Juaymah tank forms Juaymah, Rastanura south terminal Rastanura, Shedgum NGL plant Shedgum, Haradh Gas plant Haradh, Jubail Chevron Philips plant Jubail, Hawiyah NGL Recovery plant (HNRP) Hawiyah, Qatif Gosp-1 and Gosp-2 (Gas and Oil separation plant) Qatif, Haradh Gosp-3 and Gosp-2 Haradh, Hawiyah Water Injection plant (WIP) Hawiyah, and different Gas gathering manifolds and Oil and Gas well sites. And comprehensively familiar with the all the concerning standards, procedures and all safety pre-cautions for a safe construction and testing commissioning work.

Desired Position/ Motto of life:
Any appropriate position according to the above mentioned experience and hidden hardworking which can ends in the thriving achievement of the given goals and challenging targets. And I believe on taking the full responsibility and fulfilling it at my level best.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 990)

Go to Search Parameters...

Brief Description

B.Sc. in computer science and 13 years of experience in IT / Accounts / Trainer / Graphic Designer

Outside Plant Technian, Bell System Trained, College Degree, AVAYA ACS PBX READY, copper/fiber palnt install/test/termination, Cat 5 and 6 as well as paging, cameras and home theater seeks contract/fulltime work in Middle East or almost anywhere in the world..

Over 14 yr experience in Instrumentation/Control/Electrical of Oil&GAS OFFSHORE & ONSHORE.

HSE Manager, Advisor for International Oil/Gas Company, Led Assets to top quartile performance. Graduate engineer and Certified Safety Professional

Barge Master, Barge Superintendent, Rig Mover, Marine Coordinator, CSR, Operations Manager 24 years experience in offshore Construction and Drilling

Safety/Env (HSE) post sought (Will also accept Quality related positions) Reliable/Flexible/Language proficient - Willing to work worldwide, available from May 2008

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environm

25 yrs mining experience. Engineering. Operations. Supervised heavy equipment. Team player. Give job 100%. Quick learner. Show respect to all individuals. Represent employer with professionalism. Impeccable attendance & safety. Open to international positions

W/WW industry: 28+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component of W/WW systems

Mining Engineer with surface, underground, contracting, industrial minerals, metal mining, hard rock mining, block caving, narrow vein, cut & fill, dragline, international, process, frontline shift supervisory, mine planning, & permitting experience

Licensed professional civil engineer. Have worked mostly in construction as either an owner or an owner's representative. Enjoy doing field work and would like to work in a foreign country.

To obtain a supervisory / team leader position in the diesel mechanic field with an actively growing company in the oil & gas, trucking, marine or mining industries. I also desire to apply my supervisory skills to improve company profitability while enhancing customer and employee satisfaction and

GIS analyst , GIS Developer , GIS Trainer SDE administrator , GIS Data manager

Extensive experience in supervision and inspection of structural and architectural works for high rise buildings, residential, commercial, industrial, roads and bridges and large infrastructure with an over all responsibility for successful and timely project delivery

A leader with extensive experience in demanding work environments and a proven ability to prioritize business needs, then implement creative solutions. Consistently demonstrates a passion to exceed organizational goals by improving customer satisfaction, improving quality and reducing cost.

Manager / Supervisory position in the field of Administration, Personnel, Finance Accounting, Business

QS/ISO 9000, FMEA/ Control Plan/PPAP

Professional Engineering,construction & Commissioning of electronics and pneumatic Experience types of instruments such as transmitters, pr. switches, control valves, RTD's Leveltroll, I/P converters, mass flow meters,

I have over 19 years of experience working in the Petroleum Pipeline Industry doing a variety of roles. Until very recently, I have been on a special assignment as a “Lead Project Inspector” on a new Pipeline Delivery Facility, but also have other additional managerial & supervisory responsibilities

Design and Construction, Engineering, Calculations, Quality control, Installation and Start Up of new Equipment, Electrical and Electronics Repair and Maintenance

D.M.E, Autocad 2D&3D handling all high-tech machineries

15-years of experience as Document Controller for vendor & design documentation in gas and oil industry.

Seeking assignments in Process Control Instrumentation, Analyzers, Maintenance and Erection-commissioning with a growth oriented organization of repute.

7-years High School. Experience covers surface and subsurface production maintenance operations, onshore and offshore facilities’ maintenance, engineering projects execution, drilling equipment maintenance, planning and training aspects in various supervisory and management roles.

Sales manager , marketing manager, consultant Masters in business administration MBA

Geothecnic, environmental, hydrogeologic, operation

CADD DRAFTSMAN

Self stater and takes full charge of enterprise

Twenty-two years experience in design, fabrication, field erection and commissioning of various oil and gas plants and equipment. Piping and equipment layouts with specific expertise in mechanical, thermal and process design of pressure vessels, direct fired process heaters, furnaces, boilers, press

Service Support/ Product Support Heavy Equipment Maintenance Manager

Site Manager, Supervisor, Commissioning, Start up, Troubleshoot,

Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR

12 Years of Experience in the field of QA/QC Supervision Inspection of Electrical,Instrumentation and CathodicProtection Systems for Oil & Gas Producing Utilities, Remote & Relief Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, etc

Have been in the power plant industry for over 20 years, gas, steam, simple cycle, combined cycle, A10s, Frame 7FA, Frame 5 L&M

Senior Logistics Coordinator

Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation

Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments

Chemical Engineer with Environmental Engineering experience

Senior Mechanical Engineer, Bachelor Of Engineering

Maintenance Planning scheduling, Maximo, Ms Office- Word, Excel, Power Point etc. Excellant English communications, Dedicated, organized, time management, result oriented, punctual and hard working

I have spent about 8 years, applying innovative approaches to spatial data development, Integration and Management practices in my various capacities.

Operations Manager or Shift Supervisor in a Power Plant

Rigging/Heavy Lift And Transport

Developing valve exercise and hydrant flushing programs for municipal water systems and supervising their implementation. Preparing annual budgets for construction and operating accounts as well as non-recurring major expenditures.

Project Management / Engineering Coordination / Process Engineering / Business Development

EE + Internatianal contracts egotiatins from proposal to contract concluding.

Senior Instrumentation & Control and Telecom-SCADA Engineer

Windows 95/98/XP, Microsoft Office Suite, C++ Programming; capable of applying Engineering Theory and Technology to developmental and construction drawings from conceptual stages; map design; joining spatial data with Database Management System; buffer analysis; cartography; georeferencing using Arc

Innovative thinker with broad-based expertise in human resources, and business development.

Welding and electrical and management and mining class 32 hour certified fork lift operator

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out