Resume - Welding Engineer

Misco Jobs

Resume #45681

CONTACT INFORMATION:
View contact information...

CAREER SUMMARY
Specialization in metallurgical engineering and over 10 years professional experience as welding engineer in construction, fabrication and installation of Offshore Oil & Gas facilities, pipe lay and Power Generation, and fabrication of pressure vessels & Heat exchangers. Have given all my examinations for the EWE diploma through alternative route, awaiting results.

EXPERIENCE
Senior Project Leader:
TWI Ltd.
July 2005 to date

OBJECTIVE
To propose, win and manage a variety of projects of significant value to the business group.
Primary Generic Responsibilities
* To take responsibility for a variety of projects of significance to the performance of TWI or a major aspect of service to internal or external customers (to the level of around £200k pa).
* To identify and exploit profitable new business, in agreement with line management.
* To deliver an effective service to internal and external customers, in a timely, efficient and professional manner, developing key customer relationships.
* To show creativity in technical performance.
* Within area of responsibility, to organise workflow efficiently to seek improvements to operational methods.
* To work without supervision, solving problems by investigation or negotiation.
* To provide advice to line management in specific areas.
* To maximise margins through cost reduction and efficiency improvements.
* To provide advice to other staff using specialist expertise, coaching, training and enhancing systems as appropriate to achieve best practice.
* Within area of responsibility, to maintain up-to-date knowledge on all relevant standards, legislation, technical advances and best practice and provide informed advice to all.
* To meet the Quality Assurance, Health, Safety and Environment requirements of TWI policy and current legislation.

September 2004 to date Project Q.A.Supervisor B (Grade: Senior Professional Level 3) (Offshore QC/NDT/Welding coordinator):
J. Ray McDermott Middle East, Inc.
September 2004 to July 2005
Responsibilities included coordination of all offshore activities with regards to QC, NDT and welding matters.
Key tasks and responsibilities included:
* Planning and support of all QC/NDT field activities including major work barges, hook up barges at vendors/suppliers and regional coating yards.
* Sourcing & selection of suitably qualified and experienced QC & NDT personnel to meet project requirements for onshore fabrication and offshore installation/hook up based on workload.
* Preparation/assessment of NDT subcontractor RFQ/ TBE and award. Assists in evaluation and coordination of all subcontractor activities prior to mobilization, during project/spread and upon demob.
* Maintain records of weld procedures, welder qualifications, offshore welding performance and NDT subcontractor's performance.
* Provide Offshore QC, NDT input for bid preparation.

Welding Engineer A (Grade: Senior Professional Level 1):
J. Ray McDermott Middle East, Inc.
March 2004 to August 2004
Responsibilities included covering project welding engineering requirements for various work phases (i.e. construction, installation, hook-up, pre-commissioning, mechanical completion and hand over activities) both in onshore and offshore facilities. Additional responsibilities include verification of performance of quality system and process audits to verify compliance to project requirements.
Additional responsibility included providing welding technical support for bids. Inputs include lay rates, costs for procedures and welders' qualification and training, consumables/testing cost inputs, developmental costs and critical reviews for onshore/offshore fabrication/installation.
Involved with writing welding procedure specifications, method statements and technical queries and auditing to check and verify the compliance of working methods to specifications.

Projects currently being handled:
* Ras Laffan LNG Company Limited (RASGAS)-Wellhead Platforms and topsides, WH4, WH5 and WH6.

Welding Engineer B (Grade Professional Level 3):
J. Ray McDermott Middle East, Inc.
August 2001 to March 2004
As a welding engineer, the key functions were to review customer drawings/specifications for material and welding requirements to determine the necessary WPS/PQR required assuring the integrity of weld and supervising welding procedure and welder qualifications through the execution of welding plan. This included consumable selection and estimation, sourcing materials for WPS/PQR's, determining joint design, optimizing welding process, applying code and specification requirements to the proposed WPS, supervising PQR's on site and witness testing at laboratory, preparing WPS, reviewing welder qualification tests and approves documentation, assessing quantity of production testing required and ensuring timely performance and testing, consulting with customer's engineer and production supervisor on metallurgical and welding problems to ensure resolution, assisting in development of automatic welding systems and new methodology, supervising/monitoring work at the metallurgical laboratory and supervising welding school activities and Welder Training.

Projects Handled/worked on:
* Qatar General Petroleum Company (QGPC) (MM-105 WHJ, topsides, spur lines tie-ins and two pipelines in the MM field);
* Amenam/ Kpono AMP 1 Platform;
* Ras Laffan LNG Company Limited (RASGAS)-Wellhead Platforms, topsides, risers and pipelines, WH7;
* Spar / Hull Medusa Deep Water Project (Gulf Of Mexico);
* Spar/ Hull, Front Runner Deep Water Project (Gulf Of Mexico);

Dy. Manager- Tech. Marketing (Welding Consumables)
ADVANI OERLIKON LTD., Mumbai, India.
December 1999 to August 2001
Responsibilities included marketing of stainless steel, low alloy steel, customized consumables and hardfacing consumables all over India. Technical marketing for customer need & application based customized consumables. In addition, involved in product development for 9% Ni steel, development of 2.25Cr1Mo consumables with step cooling requirements and temper embrittlement tests(J/X factor and impact curves), qualification and approval of tests for consumables, Training & qualification of welders and supervisors as a service to customers as a part of ADOR Institute For Welding Training (AIWT)

Production Executive (Welding Engineering department):
GODREJ & BOYCE MFG. LTD, MUMBAI, INDIA.
August 1995 to November 1999
Welding Engineer for heat exchangers, pressure vessels and columns. Responsibilities included: Enquiry review(welding related aspects), preliminary welding estimate, contract review, design review (welding/PWHT related aspects), material review(weldability), Selection of welding process(es) and consumable(s)(weld planning), Welding procedure -qualification, testing and approval, Welders - training and qualification, estimation of consumables, technology development- new machines, new processes, new consumables, working environment -health and safety, weld procedure-monitoring and auditing, PWHT-design review, plan, implement., carry out in-house heat treatments, equipment - calibration and validation, fabrication procedures (welding related aspects), visual inspection, interpretation of radiographs, weld repairs.
Key achievements were: Tube to tube sheet automation, qualification of procedure and shop floor tube to tubeplate(Titanium) welding for Nirma pure water project and welding of more than 15000 tubes using Protig 315 and POC tool of Esab make. Tube to tube (316L) welding using Protig 315 and POA tool of Esab make. Procurement, customization and implementation of welding software (Prowrite ) from Computer Engg. Computerization of welding data: 513 PQR's and 1000 WPQ's. Selection and implementation of latest technology: BODE Long Seamer, Cypress Nozzle welder, Pipe ID overlay for small bore pipes using indigenously developed machine (system was developed as per our specifications based on continuous interaction with supplier), strip cladding using ESW as well as SAW on Soudometal head New processes developed included Stainless steel welding (GTAW) with flux Backing, strip cladding, tandem welding, narrow gap welding, twin arc welding, manual tube to tubesheet welding. ISO and U/R stamp activities. Defect analysis using tools like TQM and SQC to control defect rates below 3%. For six months I was deputed to site at Reliance India Ltd (site fabrication of 11 columns). I handled all functions for the site including production, inspection, welding. This project gave me an insight into planning, execution and control for site jobs. Received individual awards for top 30% performers in the year 1996-97 and 1997-98

Executive - Sales
Esab India Ltd., Mumbai, India.
July 1994 to July 1995
Handled potential customers like Rashtriya Chemical Fertiliser, Hindustan Petro Chemical Ltd., Bharat Petrochemical Ltd., Tata Electric, Babha Atomic Research Centre and Larsen & Toubro ECC.

EDUCATION
Bachelor of Technology in Metallurgical Engineering
Institute of Technology, Banaras Hindu University, India (1994)
CGPA: 8.03/10.00

PROFESSIONAL QUALIFICATIONS
* Working towards EWE by alternative route, awaiting EWE resuults, EWE exams given on 17-18 July 2006.
* Chartered Engineer (CEng) Registrant no: 549923
* Elected Member Of Welding Institute, 3rd December 2003
* Elected Member Of Institute of Materials, Minerals and Mining
* CSWIP, Senior Welding Inspector (Cert no 6809)
* Registered Senior Welding Inspector (Registration No. 1727)
* European Welding Inspection Specialist (Diploma No. EWIS/GB/03116)
* International Welding Inspector: Standard Level (Diploma No. IWI-S/GB/03116)
* API-510 Pressure vessel Inspector (Certificate No 25448)
* American Society for Quality- Certified Quality Engineer (Certificate Number 46001).
* Internal Quality Auditor - Lloyd's Register, 12th-13th April 1999

PROFESSIONAL TRAINING
* Leadership skills (In-house): 24th October 2004
* Time management (In-House): 25th October 2004
* Basic Metallurgy: The Welding Institute, 23rd-27th February 2004
* Dillinger Pressure vessel conference, 19th February 2004
* ECA Course: The Welding Institute, 24th-25th January 2004
* ISO 9000:2000 Transition Auditor Course: DNV, 9th-10th November 2003
* Interpersonal Skills (1996), Godrej In-house Training
* Development and building of Documented Management (1999) Lloyds Register
* Internal Quality Auditing Certificate Course (12th to 13th April 1999) Lloyd's Register, Mumbai, India.
* Quality Education System course in Total Quality Management "Becoming Globally Competitive" (February 1997), Anaar, Mumbai, -By J Nirdosh Reddy.
* Statistical Quality Control (June 1997) Anaar, Mumbai, -By J Nirdosh Reddy.
* Interpretation of Radiographs conducted by by ASNT LEVEL III (obtained 90%)
* `Criteria for Nuclear Pressure Vessel Fabrication' conducted Nuclear Power Corporation, Mumbai, India, (Feb. 1997).
* `Continuing Education Programme on Welding Metallurgy' conducted by Indian Institute of Technology., Bombay, India, (July 1996).
Patents & Publications
* Tube-to-Tube sheet welding: presented at an International Level Symposium International Welding Conference -1996 held at Nehru Science Centre, Mumbai.
* Quasicrystals: an overview in Banaras Metallurgist, an International periodical on research in metallurgy. Paper presented at a National level symposium held at Regional Engineering College, Tiruchirapalli.
* Semi wet analysis of YBa2Cu, IT-BHU

PROFESSIONAL MEMBERSHIPS
* Member, The Welding Institute
* Member, Institute of Materials, Minerals and Mining
* Member, American Welding Society
* Member, The Minerals, Metals & Materials Society(TSM)
* Member, American Society for Quality
* Life Member, Indian Institute of Welding
* Member, Emirates Welding Society

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 1001)

Go to Search Parameters...

Brief Description

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)

Nace certified coating inspector level 3, Chartek approved fireproofing inspector & full qualified insualtion inspector.

Fitter Including Machining and Diesel Fitting

Internationally Expierenced, First Year MBA, Arizona State University

A globally-certified procurement professional with extensive Asia-Pacific experience

Iam a Mechanical Design Engineer with experience in Heavy steel structures, Pressure Vessels ( Several Types), Power Generation, Material Handling. I have quite a number of projects to my name that have been completed succesfully

Big believer in teamwork, organization and co-operation, have the ability to perform well under pressure, hard worker, able to behave as a leader, manage stress.

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

15 years experience in the management, production, materials, logistics and international transport fields, 13 of which are at managerial level, the last 10 years being spent as an expatriate in Nigeria, France, Togo and West-Central Africa.

Quality Assurance in Oil and Gas industry

With over eight years of project management experience on seismic petroleum exploration surveys and submarine cable installations. Proven ability to work independently, to work closely with the client on site, and to supervise operations in diverse and difficult working environments

An enthusiastic and professional Engineering Manager; chartered mechanical Engineer, who enjoys being part of, as well as leading, a successful and productive team. Quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems. Able to work well on his own initi

I have been employed in Engineering, Procurement & Construction under Saudi Aramco Projects, I engaged in various fields of Engineering, Project Design, Maintenance, and Commissioning Operation. My knowledge consist of Field Inspection, Expediting, Pre-Commissioning, Material Coordination, Material

Skills: Auto CAD versions 9 thru 2006i, Prime Medusa, UNIX, Micro Station, Microsoft Office, along with several other computer based applications.

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

To obtain a challenging position that will allow me to gain knowledge and experience in the area of Computer Aided Drafting (CAD), Microstation and PDS in Technical Department. To work and grow along with an employer to mutually obtain our objectives.

Logistic Job Skills: Stock Turn-in/Turn-out, Stores Indent/Requisition, Stores Data Entry, Physical Inventory Management, Stock Replenishment, Management Reports, etc.

Project Engineer, 5years experiance in Technip working on EPC jobs in LNG sector, excellent managerial , engineering skills.

Welding Engineer

Mechanical maintenance engineer with 3 years of experience in press shop

SCADA, DCS, T&C, O&M

Procurement / Contracts Specialist

I am not looking for just another pay cheque. I enjoy my work and am proud of my profession. Your company providing an excellent services. I share the values that make this possible, which should enable me to fit in and complement the team.

Commissioning of utilities in oil & gas plants and water treatment plants

Mechanical System Engineer

Mechanical engineer with extensive experience of over 13 years in contract administration, estimation, tendering, budgeting, cost control, billing variations, claims and arbitrations & project closing. Well-versed in procurement, installation and commissioning of electro-mechanical

HSE, Manager, Trainer, Advisor, Emergency response,Firefighting

Over 26 years of skills, education and professional experience with large and small-scale industrial plants, utility design, maintenance and operation, and materials handling with 10 years Utility Engineering instruction experience at a local Technical College. Management skills include working to s

Manager - Business Operations Consulting ¡V Constructability Planning, Tracking Systems, and Composite Modeling.

Sales Engineer/Sales Director in Computer and Engineering industry

Experienced Heavy Equipment Operator/Open Pit Miner/Willing to relocate

Company Dispatcher,service Coordinator,Administrative Exp.

Project Manager

6 years experience in IT Industry which includes Networking, server operation and maintenance system and database administration. Having MCSE, MCDBA, CCNA certification. Compeleted MBA

Majoring in Business Management, I have extensive knowledge of Transportation and Fleet Budget Management, Canadian and U.S. Customs Requirements, Broker Clearance Procedures and International Shipping Requirements for Consolidated and Bonded Freight

Built, operated and maintained three processing plants. Abrasives, roofing granules, high density sands for water filtration and coal preparation were the main products.

Electrician-Industrial

I have over 30 years of experience in the electrical industry, primarily in the industrial sector, and in a supervisory capacity.

To work in a challenging and motivating environment where there are opportunities for the full and effective utilization of my skills and potentials and to showcase my God-given talents.

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

Manager, Team leader, Computerized production management, International import-export, letters of credit, banking, assistant

Project Safety Advisor

Around 20 years (around 8 years as lead) experience in all QA/QC activities up to final certification of equipment and piping including pre commissioning inspection in Oil & Gas (Production Platforms (Topsides), Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbui

Highly accomplished, seasoned Logistics and Procurement specialist with extensive experience in providing expertise in developing countries in supply chain management, contract administration, material control and training in greenfield and expansion construction projects in remote areas.

25 years of gas plant construction, commissioning, startup and operations. Also gas treating and transmission experience. 3 years in Syria, 1.5 years offshore Dubai.

More than eight years of automotive industries R&D experience in engine design, development and testing with India’s leading automotive and diesel engine manufacturers.

Experienced in remote operations - Logistics, education, administration, building inspection

Master Electrician with 26 yrs experience in the construction field

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out